The automated conversion of /* fallthrough */ comments converted
a comment outside of an #ifdef/#endif case block that should be
inside the block.
Move the fallthrough inside the block to silence the warning.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes coccicheck warning:
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:723:2-50: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:733:3-52: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:747:3-51: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Under sriov pp one vf mode, there is no need to set
soc clk under pp one vf because smu firmware will depend
on the mclk to set the appropriate soc clk for it.
Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by : Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are several occurrances of the pointer hwmgr being dereferenced
before it is null checked. Fix these by performing the dereference
of hwmgr after it has been null checked.
Addresses-Coverity: ("Dereference before null check")
Fixes: c9ffa427db ("drm/amd/powerplay: enable pp one vf mode for vega10")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Originally, due to the restriction from PSP and SMU, VF has
to send message to hypervisor driver to handle powerplay
change which is complicated and redundant. Currently, SMU
and PSP can support VF to directly handle powerplay
change by itself. Therefore, the old code about the handshake
between VF and PF to handle powerplay will be removed and VF
will use new the registers below to handshake with SMU.
mmMP1_SMN_C2PMSG_101: register to handle SMU message
mmMP1_SMN_C2PMSG_102: register to handle SMU parameter
mmMP1_SMN_C2PMSG_103: register to handle SMU response
v2: remove module parameter pp_one_vf
v3: fix the parens
v4: forbid vf to change smu feature
v5: use hwmon_attributes_visible to skip sepicified hwmon atrribute
v6: change skip condition at vega10_copy_table_to_smc
Signed-off-by: Yintian Tao <yttao@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c: In function vega10_get_performance_level:
drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c:5217:23: warning: variable data set but not used [-Wunused-but-set-variable]
'data' is introduced by commit f688b614b6 ("drm/amd/pp:
Implement get_performance_level for legacy dgpu"), but never used,
so remove it.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c: In function smu7_check_mc_firmware:
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:4215:11: warning: variable vbios_version set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c: In function smu7_get_performance_level:
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:5054:21: warning: variable data set but not used [-Wunused-but-set-variable]
'vbios_version' is introduced by commit 599a7e9fe1 ("drm/amd/powerplay:
implement smu7 hwmgr to manager asics with smu ip version 7."),
but never used, so remove it.
'data' is introduced by commit f688b614b6 ("drm/amd/pp:
Implement get_performance_level for legacy dgpu"), but never used,
so remove it.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is to improve the performance in the compute mode
for vega10. For example, the original performance for a rocm
bandwidth test: 2G internal GPU copy, is about 99GB/s.
With the idle power features disabled dynamically, the porformance
is promoted to about 215GB/s.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add xgmi pstate setting on powerplay routine.
V2: split the change of is_support_sw_smu_xgmi into a separate patch
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The vega10_odn_update_soc_table() function does not allow the SCLK
dependent voltage to be set for power-state 7 to a value below the default
in pptable. Change the for-loop condition to allow undervolting in the
highest state.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205277
Signed-off-by: Pelle van Gils <pelle@vangils.xyz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It was a vega20 specific hack. Check if we are in reset
and what reset method we are using.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Program THM_BACO_CNTL.SOC_DOMAIN_IDLE=1 will tell VBIOS to disable ECC when
BACO exit. This can save BACO exit time by PSP on none-ECC SKU. Drop the setting
for ECC supported SKU.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2:
PPSMC_MSG_RequestI2CBus seems not to work and so to avoid conflict
over I2C bus and engine disable thermal control access to
force SMU stop using the I2C bus until the issue is reslolved.
Expose and call vega20_is_smc_ram_running to skip locking when SMU
FW is not yet loaded.
v3:
Remove the prevoius hack as the SMU found the bug.
v5: Typo fix
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If DC has synced the displays, we can enable mclk switching to
save power.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If DC has synced the displays, we can enable mclk switching to
save power.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For the 40.46 SMU release, they changed CurrSocketPower to
AverageSocketPower, but this was changed back in 40.47 so just check if
it's 40.46 and make the appropriate change
Tested with 40.45, 40.46 and 40.47 successfully
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SMU changed reading from CurrSocketPower to AverageSocketPower, so
reflect this accordingly. This fixes the issue where Average Power
Consumption was being reported as 0 from SMU 40.46-onward
v2: Fixed headline prefix
v3: Add check for SMU version for proper compatibility
v4: Style fix
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
