Merge the missing SC8280XP LPASS DeviceTree changes, which where brought
in through a topic branch in order to be shared with the DeviceTree
source files, but not merged into the clock tree until now.
- Handle allocation failures from kasprintf() and friends
* clk-imx:
clk: imx: clk-imx8mp: improve error handling in imx8mp_clocks_probe()
clk: imx93: fix memory leak and missing unwind goto in imx93_clocks_probe
clk: imx: clk-imx8mn: fix memory leak in imx8mn_clocks_probe
dt-bindings: clock: imx8m: Add missing interrupt property
clk: imx: clk-imxrt1050: fix memory leak in imxrt1050_clocks_probe
clk: imx: composite-8m: Add imx8m_divider_determine_rate
clk: imx: scu: use _safe list iterator to avoid a use after free
clk: imx: drop imx_unregister_clocks
clk: imx6ul: retain early UART clocks during kernel init
clk: imx: imx6sx: Remove CLK_SET_RATE_PARENT from the LDB clocks
* clk-microchip:
dt-bindings: clocks: at91sam9x5-sckc: convert to yaml
dt-bindings: clocks: atmel,at91rm9200-pmc: convert to yaml
clk: microchip: Use of_property_read_bool() for boolean properties
clk: microchip: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE
* clk-cleanup:
clk: fix typo in clk_hw_register_fixed_rate_parent_data() macro
clk: Fix memory leak in devm_clk_notifier_register()
clk: mvebu: Iterate over possible CPUs instead of DT CPU nodes
clk: mvebu: Use of_get_cpu_hwid() to read CPU ID
MAINTAINERS: Add Marvell mvebu clock drivers
clk: mvebu: Use of_address_to_resource()
clk: tegra: tegra124-emc: Fix potential memory leak
clk: clocking-wizard: Fix Oops in clk_wzrd_register_divider()
clk: bcm: rpi: Fix off by one in raspberrypi_discover_clocks()
clk: sifive: Use devm_platform_ioremap_resource()
* clk-bindings:
dt-bindings: clock: drop unneeded quotes and use absolute /schemas path
dt-bindings: rcc: stm32: Sync with u-boot copy for STM32MP13 SoC
* clk-ti:
clk: keystone: syscon-clk: Add support for audio refclk
dt-bindings: clock: Add binding documentation for TI Audio REFCLK
dt-bindings: clock: ehrpwm: Remove unneeded syscon compatible
clk: keystone: syscon-clk: Allow the clock node to not be of type syscon
* clk-kasprintf:
clk: clocking-wizard: check return value of devm_kasprintf()
clk: ti: clkctrl: check return value of kasprintf()
clk: keystone: sci-clk: check return value of kasprintf()
clk: si5341: free unused memory on probe failure
clk: si5341: check return value of {devm_}kasprintf()
clk: si5341: return error if one synth clock registration fails
clk: cdce925: check return value of kasprintf()
clk: vc5: check memory returned by kasprintf()
Adds device tree binding documentation for system controller node present
in Mediatek MIPS and Ralink SOCs. This node is a clock and reset provider
for the rest of the world. This covers RT2880, RT3050, RT3052, RT3350,
RT3883, RT5350, MT7620, MT7628 and MT7688 SoCs.
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
More Qualcomm ARM64 DTS changes for v6.5
This introduces support for the Qualcomm SDX75 platform, with the IDP
reference board. On IPQ5332 the RDP474 board is added and on IPQ9574 the
RDP454 is introduced.
On SC8280XP, and hence Lenovo ThinkPad X13s, GPU support is added.
For QDU1000, SDM845, SM670, SC8180X, SM6350 and SM8550 the RSC is added
to the CPU cluster power-domain to flush sleep & wake votes as the
cluster goes down.
On IPQ5332 additional reserved-memory regions to improve post mortem
debugging. UART1 is added. The MI01.2 board is renamed RDP441 and the
RDP474 is added.
On IPQ8074 critical thermal trip points are defined.
As with IPQ5332 additional reserved-memory regions are used to improve
post mortem debugging. Thermal sensors (tsens) are added and zones
defined. The crypto engine is added, and support for the RDP454 board is
added.
Across MSM8916 and MSM8939 pinctrl state definitions are cleaned up and
the purpose of msm8939-pm8916 is documented. MSM8939 has regulator
definitions cleaned up, following to the previous effort on MSM8916.
CPU Bus Fabric scaling support is added to MSM8996 Pro.
On QCM2290 CPU idle states are added.
For QDU1000 SDHCI is introduced and enabled on the IDP to gain eMMC
support. IMEM and PIL information regions are defined for improved post
mortem debugging.
The Qualcomm Robotics RB2 kit gets its on-board buttons described.
A few fixes are introduced for the newly merged SC8180X, in particluar
the DisplayPort blocks are moved to the MMCX power domain to avoid power
being reduced prematurely during boot.
The SC8280XP GPU is added and enabled for the Lenovo Thinkpad X13s,
and resets for the soundwire controllers are added. The OUI is
specified for ethernet phys on SA8540P Ride platform, to avoid reset
issues.
Charger description is added to the PMI8998 PMIC and enabled across
OnePlus 6/6T, SHIFT SHIFT6mq and Xiaomi Pocophone F1.
On SM6350 CPU idle states and UART1 are added. And SM6375 gains GPU
clock controller and IOMMU definitions.
The Fairphone FP4 gains Bluetooth support.
SM8150 is transitioned to use 2 interconnect-cells, and the USB
interconnect path is described to ensure buses are adequately voted for.
The same changes are done for SM8250, and the resolution of the
static framebuffer on Sony Xperia 1 II and 5 II are corrected.
The USB bus paths are also added to SM8350, SM8450 and SM8550.
On SM8550 DisplayPort nodes are added, as is the PWM controller for
driving the notification LED and the RTC is enabled. For the MTP and QRD
boards, the soundcard and audio codecs are defined.
A Tegra change, related to LP855X binding changes, was accidentally
picked up and dropped again later.
A number of DeviceTree fixes identified through validation was
introduced as well. Additionally a few nodes got their default status
changed to avoid unnecessarily having to enable them (e.g. the mdp/dpu
node).
* tag 'qcom-arm64-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (94 commits)
Revert "arm64: dts: adapt to LP855X bindings changes"
arm64: dts: qcom: sc8280xp: Enable GPU related nodes
arm64: dts: qcom: sc8280xp: Add GPU related nodes
arm64: dts: qcom: msm8939-pm8916: Mark always-on regulators
arm64: dts: qcom: msm8939: Define regulator constraints next to usage
arm64: dts: qcom: msm8939-pm8916: Clarify purpose
arm64: dts: qcom: msm8939: Fix regulator constraints
arm64: dts: qcom: msm8939-sony-tulip: Allow disabling pm8916_l6
arm64: dts: qcom: msm8939-sony-tulip: Fix l10-l12 regulator voltages
arm64: dts: qcom: msm8939: Disable lpass_codec by default
arm64: dts: qcom: msm8939-pm8916: Add missing pm8916_codec supplies
arm64: dts: qcom: qrb4210-rb2: Enable on-board buttons
arm64: dts: qcom: msm8916: Drop msm8916-pins.dtsi
arm64: dts: qcom: msm8916/39: Rename wcnss pinctrl
arm64: dts: qcom: msm8916/39: Cleanup audio pinctrl
arm64: dts: qcom: apq8016-sbc: Drop unneeded MCLK pinctrl
arm64: dts: qcom: msm8916/39: Consolidate SDC pinctrl
arm64: dts: qcom: msm8916/39: Fix SD card detect pinctrl
arm64: dts: qcom: msm8996: rename labels for HDMI nodes
arm64: dts: qcom: sm8250: rename labels for DSI nodes
...
Link: https://lore.kernel.org/r/20230615162043.1461624-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
arm64: ZynqMP DT changes for v6.5
Various small fixes and cleanups to be aligned with the latest dt-schema.
Other major changes are:
- Wire mali-400 gpu
- Change board name for zcu1275
- Use ethernet-phy-id to handle ETH phy reset properly
- Switch to amd.com emails
- Update people in DT bindings
* tag 'zynqmp-dt-for-v6.5' of https://github.com/Xilinx/linux-xlnx: (33 commits)
dt-bindings: usb: xilinx: Replace Manish by Piyush
dt-bindings: xilinx: Remove Rajan, Jolly and Manish
arm64: zynqmp: Used fixed-partitions for QSPI in k26
arm64: zynqmp: Add pmu interrupt-affinity
arm64: zynqmp: Set qspi tx-buswidth to 4
arm64: zynqmp: Fix usb node drive strength and slew rate
arm64: zynqmp: Describe TI phy as ethernet-phy-id
arm64: zynqmp: Switch to amd.com emails
arm64: zynqmp: Convert kv260-revA overlay to ASCII text
dt-bindings: xilinx: Switch xilinx.com emails to amd.com
arm64: xilinx: Use zynqmp prefix for SOM dt overlays
arm64: zynqmp: Add phase tags marking
arm64: zynqmp: Describe bus-width for SD card on KV260
arm64: zynqmp: Enable AMS on SOM and other zcu10x boards
arm64: zynqmp: Enable DP driver for SOMs
arm64: zynqmp: Setup clock for DP and DPDMA
arm64: zynqmp: Switch to ethernet-phy-id in kv260
arm64: zynqmp: Disable USB3.0 for zc1751-xm016-dc2
arm64: zynqmp: Add pinctrl emmc description to SM-K26
arm64: zynqmp: Add gpio labels for modepin gpio
...
Link: https://lore.kernel.org/r/CAHTX3d+2s_KmCnd=x5hydGb+LYoznAzYGTizvqqN2NFmrBurfw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This node's register space is not accessed by any other node, which
is the traditional use for the "syscon" hint. It looks to have been
added here to make use of a Linux kernel helper syscon_node_to_regmap().
The Linux driver now uses a more appropriate helper that does not
require the hint, so let's remove it from the binding.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230516184626.154892-2-afd@ti.com
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the dt-bindings header for Nuvoton ma35d1, that gets shared
between the clock controller and clock references in the dts.
Add documentation to describe nuvoton ma35d1 clock driver.
Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge the SM8450 Video Clock Controller DeviceTree binding through a
topic branch, in order to be able to use the introduced constants in
changes on DeviceTree source branch as well.
Merge the Video Clock Controller DeviceTree bindings through a topic
branch, in order to be able to use the introduced constants in the
DeviceTree source branch as well.
Pull devicetree fixes from Rob Herring:
- Add Conor Dooley as a DT binding maintainer
- Swap the order of parsing /memreserve/ and /reserved-memory nodes so
that the /reserved-memory nodes which have more information are
handled first
- Fix some property dependencies in riscv,pmu binding
- Update maintainers entries on a couple of bindings
* tag 'devicetree-fixes-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
MAINTAINERS: add Conor as a dt-bindings maintainer
dt-bindings: perf: riscv,pmu: fix property dependencies
dt-bindings: xilinx: Remove Naga from memory and mtd bindings
of: fdt: Scan /memreserve/ last
dt-bindings: clock: r9a06g032-sysctrl: Change maintainer to Fabrizio Castro
dt-bindings: pinctrl: renesas,rzv2m: Change maintainer to Fabrizio Castro
dt-bindings: pinctrl: renesas,rzn1: Change maintainer to Fabrizio Castro
dt-bindings: i2c: renesas,rzv2m: Change maintainer to Fabrizio Castro
Pull clk updates from Stephen Boyd:
"Nothing looks out of the ordinary in this batch of clk driver updates.
There are a couple patches to the core clk framework, but they're all
basically cleanups or debugging aids. The driver updates and new
additions are dominated in the diffstat by Qualcomm and MediaTek
drivers. Qualcomm gained a handful of new drivers for various SoCs,
and MediaTek gained a bunch of drivers for MT8188. The MediaTek
drivers are being modernized as well, so there are updates all over
that vendor's clk drivers. There's also a couple other new clk drivers
in here, for example the Starfive JH7110 SoC support is added.
Outside of the two major SoC vendors though, we have the usual
collection of non-critical fixes and cleanups to various clk drivers.
It's good to see that we're getting more cleanups and modernization
patches. Maybe one day we'll be able to properly split clk providers
from clk consumers.
Core:
- Print an informational message before disabling unused clks
New Drivers:
- BCM63268 timer clock and reset controller
- Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
MT8195 SoCs
- Mediatek MT8188 SoC clk drivers
- Clock driver for Sunplus SP7021 SoC
- Clk driver support for Loongson-2 SoCs
- Clock driver for Skyworks Si521xx I2C PCIe clock generators
- Initial Starfive JH7110 clk/reset support
- Global clock controller drivers for Qualcomm SM7150, IPQ9574,
MSM8917 and IPQ5332 SoCs
- GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P
SoCs
Updates:
- Shrink size of clk_fractional_divider a little
- Convert various clk drivers to devm_of_clk_add_hw_provider()
- Convert platform clk drivers to remove_new()
- Converted most Mediatek clock drivers to struct platform_driver
- MediaTek clock drivers can be built as modules
- Reimplement Loongson-1 clk driver with DT support
- Migrate socfpga clk driver to of_clk_add_hw_provider()
- Support for i3c clks on Aspeed ast2600 SoCs
- Add clock generic devm_clk_hw_register_gate_parent_data
- Add audiomix block control for i.MX8MP
- Add support for determine_rate to i.MX composite-8m
- Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate
- Provide clock name in error message for clk-gpr-mux on get parent
failure
- Drop duplicate imx_clk_mux_flags macro
- Register the i.MX8MP Media Disp2 Pix clock as bus clock
- Add Media LDB root clock to i.MX8MP
- Make i.MX8MP nand_usdhc_bus clock as non-critical
- Fix the rate table for i.MX fracn-gppll
- Disable HW control for the fracn-gppll in order to be controlled by
register write
- Add support for interger PLL in fracn-gppll
- Add mcore_booted module parameter to i.MX93 provider
- Add NIC, A55 and ARM PLL clocks to i.MX93
- Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents
- Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP
to get more accurate clock rates
- Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical
- Update some of the i.MX critical clocks flags to allow glitchless
on-the-fly rate change.
- Add I2C5 clock on Renesas R-Car V3H
- Exynos850: Add CMU_G3D clock controller for the Mali GPU
- Extract Exynos5433 (ARM64) clock controller power management code
to common driver parts
- Exynos850: make PMU_ALIVE_PCLK clock critical
- Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel
Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car
V4H
- Add video capture (VIN) clocks on Renesas R-Car V3H
- Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H
- Support for Stromer Plus PLL on Qualcomm IPQ5332
- Add a missing reset to Qualcomm QCM2290
- Migrate Qualcomm IPQ4019 to clk_parent_data
- Make USB GDSCs enter retention state when disabled on Qualcomm
SM6375, MSM8996 and MSM8998 SoCs
- Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk
- Add two EMAC GDSCs on Qualcomm SC8280XP
- Use shared rcg clk ops in Qualcomm SM6115 GCC
- Park Qualcomm SM8350 PCIe PIPE clks when disabled
- Add GDSCs to Qualcomm SC7280 LPASS audio clock controller
- Add missing XO clocks to Qualcomm MSM8226 and MSM8974
- Convert some Qualcomm clk DT bindings to YAML
- Reparenting fix for the clock supplying camera modules on Rockchip
rk3399
- Mark more critical (bus-)clocks on Rockchip rk3588"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (290 commits)
clk: qcom: gcc-sc8280xp: Add EMAC GDSCs
clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers
clk: rockchip: rk3588: make gate linked clocks critical
clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk
clk: qcom: add the GPUCC driver for sa8775p
dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P
clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling
clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc
clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration
dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property
clk: starfive: Avoid casting iomem pointers
clk: microchip: fix potential UAF in auxdev release callback
clk: qcom: rpm: Use managed `of_clk_add_hw_provider()`
clk: mediatek: fhctl: Mark local variables static
clk: sifive: make SiFive clk drivers depend on ARCH_ symbols
clk: uniphier: Use managed `of_clk_add_hw_provider()`
clk: si5351: Use managed `of_clk_add_hw_provider()`
clk: si570: Use managed `of_clk_add_hw_provider()`
clk: si514: Use managed `of_clk_add_hw_provider()`
clk: lmk04832: Use managed `of_clk_add_hw_provider()`
...
