SNP retrieves the majority of CPUID information from the SNP CPUID page.
But there are times when that information needs to be supplemented by the
hypervisor, for example, obtaining the initial APIC ID of the vCPU from
leaf 1.
The current implementation uses the MSR protocol to retrieve the data from
the hypervisor, even when a GHCB exists. The problem arises when an NMI
arrives on return from the VMGEXIT. The NMI will be immediately serviced
and may generate a #VC requiring communication with the hypervisor.
Since a GHCB exists in this case, it will be used. As part of using the
GHCB, the #VC handler will write the GHCB physical address into the GHCB
MSR and the #VC will be handled.
When the NMI completes, processing resumes at the site of the VMGEXIT
which is expecting to read the GHCB MSR and find a CPUID MSR protocol
response. Since the NMI handling overwrote the GHCB MSR response, the
guest will see an invalid reply from the hypervisor and self-terminate.
Fix this problem by using the GHCB when it is available. Any NMI
received is properly handled because the GHCB contents are copied into
a backup page and restored on NMI exit, thus preserving the active GHCB
request or result.
[ bp: Touchups. ]
Fixes: ee0bfa08a3 ("x86/compressed/64: Add support for SEV-SNP CPUID table in #VC handlers")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/a5856fa1ebe3879de91a8f6298b6bbd901c61881.1690578565.git.thomas.lendacky@amd.com
The SGX EPC reclaimer (ksgxd) may reclaim the SECS EPC page for an
enclave and set secs.epc_page to NULL. The SECS page is used for EAUG
and ELDU in the SGX page fault handler. However, the NULL check for
secs.epc_page is only done for ELDU, not EAUG before being used.
Fix this by doing the same NULL check and reloading of the SECS page as
needed for both EAUG and ELDU.
The SECS page holds global enclave metadata. It can only be reclaimed
when there are no other enclave pages remaining. At that point,
virtually nothing can be done with the enclave until the SECS page is
paged back in.
An enclave can not run nor generate page faults without a resident SECS
page. But it is still possible for a #PF for a non-SECS page to race
with paging out the SECS page: when the last resident non-SECS page A
triggers a #PF in a non-resident page B, and then page A and the SECS
both are paged out before the #PF on B is handled.
Hitting this bug requires that race triggered with a #PF for EAUG.
Following is a trace when it happens.
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:sgx_encl_eaug_page+0xc7/0x210
Call Trace:
? __kmem_cache_alloc_node+0x16a/0x440
? xa_load+0x6e/0xa0
sgx_vma_fault+0x119/0x230
__do_fault+0x36/0x140
do_fault+0x12f/0x400
__handle_mm_fault+0x728/0x1110
handle_mm_fault+0x105/0x310
do_user_addr_fault+0x1ee/0x750
? __this_cpu_preempt_check+0x13/0x20
exc_page_fault+0x76/0x180
asm_exc_page_fault+0x27/0x30
Fixes: 5a90d2c3f5 ("x86/sgx: Support adding of pages to an initialized enclave")
Signed-off-by: Haitao Huang <haitao.huang@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20230728051024.33063-1-haitao.huang%40linux.intel.com
Pull x86 rethunk fixes from Borislav Petkov:
"Fix the patching ordering between static calls and return thunks"
* tag 'x86_urgent_for_v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86,static_call: Fix static-call vs return-thunk
x86/alternatives: Remove faulty optimization
Pull misc x86 fixes from Ingo Molnar:
- Fix a kexec bug
- Fix an UML build bug
- Fix a handful of SRSO related bugs
- Fix a shadow stacks handling bug & robustify related code
* tag 'x86-urgent-2023-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/shstk: Add warning for shadow stack double unmap
x86/shstk: Remove useless clone error handling
x86/shstk: Handle vfork clone failure correctly
x86/srso: Fix SBPB enablement for spec_rstack_overflow=off
x86/srso: Don't probe microcode in a guest
x86/srso: Set CPUID feature bits independently of bug or mitigation status
x86/srso: Fix srso_show_state() side effect
x86/asm: Fix build of UML with KASAN
x86/mm, kexec, ima: Use memblock_free_late() from ima_free_kexec_buffer()
Commit
7825451fa4 ("static_call: Add call depth tracking support")
failed to realize the problem fixed there is not specific to call depth
tracking but applies to all return-thunk uses.
Move the fix to the appropriate place and condition.
Fixes: ee88d363d1 ("x86,static_call: Use alternative RET encoding")
Reported-by: David Kaplan <David.Kaplan@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
The following commit
095b8303f3 ("x86/alternative: Make custom return thunk unconditional")
made '__x86_return_thunk' a placeholder value. All code setting
X86_FEATURE_RETHUNK also changes the value of 'x86_return_thunk'. So
the optimization at the beginning of apply_returns() is dead code.
Also, before the above-mentioned commit, the optimization actually had a
bug It bypassed __static_call_fixup(), causing some raw returns to
remain unpatched in static call trampolines. Thus the 'Fixes' tag.
Fixes: d2408e043e ("x86/alternative: Optimize returns patching")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/16d19d2249d4485d8380fb215ffaae81e6b8119e.1693889988.git.jpoimboe@kernel.org
There are several ways a thread's shadow stacks can get unmapped. This
can happen on exit or exec, as well as error handling in exec or clone.
The task struct already keeps track of the thread's shadow stack. Use the
size variable to keep track of if the shadow stack has already been freed.
When an attempt to double unmap the thread shadow stack is caught, warn
about it and abort the operation.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: H.J. Lu <hjl.tools@gmail.com>
Link: https://lore.kernel.org/all/20230908203655.543765-4-rick.p.edgecombe%40intel.com
When clone fails after the shadow stack is allocated, any allocated shadow
stack is cleaned up in exit_thread() in copy_process(). So the logic in
copy_thread() is unneeded, and also will not handle failures that happen
outside of copy_thread().
In addition, since there is a second attempt to unmap the same shadow
stack, there is a race where an newly mapped region could get unmapped.
So remove the logic in copy_thread() and rely on exit_thread() to handle
clone failure.
Fixes: b2926a36b9 ("x86/shstk: Handle thread shadow stack")
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: H.J. Lu <hjl.tools@gmail.com>
Link: https://lore.kernel.org/all/20230908203655.543765-3-rick.p.edgecombe%40intel.com
Shadow stacks are allocated automatically and freed on exit, depending
on the clone flags. The two cases where new shadow stacks are not
allocated are !CLONE_VM (fork()) and CLONE_VFORK (vfork()). For
!CLONE_VM, although a new stack is not allocated, it can be freed normally
because it will happen in the child's copy of the VM.
However, for CLONE_VFORK the parent and the child are actually using the
same shadow stack. So the kernel doesn't need to allocate *or* free a
shadow stack for a CLONE_VFORK child. CLONE_VFORK children already need
special tracking to avoid returning to userspace until the child exits or
execs. Shadow stack uses this same tracking to avoid freeing CLONE_VFORK
shadow stacks.
However, the tracking is not setup until the clone has succeeded
(internally). Which means, if a CLONE_VFORK fails, the existing logic will
not know it is a CLONE_VFORK and proceed to unmap the parents shadow stack.
This error handling cleanup logic runs via exit_thread() in the
bad_fork_cleanup_thread label in copy_process(). The issue was seen in
the glibc test "posix/tst-spawn3-pidfd" while running with shadow stack
using currently out-of-tree glibc patches.
Fix it by not unmapping the vfork shadow stack in the error case as well.
Since clone is implemented in core code, it is not ideal to pass the clone
flags along the error path in order to have shadow stack code have
symmetric logic in the freeing half of the thread shadow stack handling.
Instead use the existing state for thread shadow stacks to track whether
the thread is managing its own shadow stack. For CLONE_VFORK, simply set
shstk->base and shstk->size to 0, and have it mean the thread is not
managing a shadow stack and so should skip cleanup work. Implement this
by breaking up the CLONE_VFORK and !CLONE_VM cases in
shstk_alloc_thread_stack() to separate conditionals since, the logic is
now different between them. In the case of CLONE_VFORK && !CLONE_VM, the
existing behavior is to not clean up the shadow stack in the child (which
should go away quickly with either be exit or exec), so maintain that
behavior by handling the CLONE_VFORK case first in the allocation path.
This new logioc cleanly handles the case of normal, successful
CLONE_VFORK's skipping cleaning up their shadow stack's on exit as well.
So remove the existing, vfork shadow stack freeing logic. This is in
deactivate_mm() where vfork_done is used to tell if it is a vfork child
that can skip cleaning up the thread shadow stack.
Fixes: b2926a36b9 ("x86/shstk: Handle thread shadow stack")
Reported-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: H.J. Lu <hjl.tools@gmail.com>
Link: https://lore.kernel.org/all/20230908203655.543765-2-rick.p.edgecombe%40intel.com
To support live migration, the hypervisor sets the "lowest common
denominator" of features. Probing the microcode isn't allowed because
any detected features might go away after a migration.
As Andy Cooper states:
"Linux must not probe microcode when virtualised. What it may see
instantaneously on boot (owing to MSR_PRED_CMD being fully passed
through) is not accurate for the lifetime of the VM."
Rely on the hypervisor to set the needed IBPB_BRTYPE and SBPB bits.
Fixes: 1b5277c0ea ("x86/srso: Add SRSO_NO support")
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/3938a7209606c045a3f50305d201d840e8c834c7.1693889988.git.jpoimboe@kernel.org
Booting with mitigations=off incorrectly prevents the
X86_FEATURE_{IBPB_BRTYPE,SBPB} CPUID bits from getting set.
Also, future CPUs without X86_BUG_SRSO might still have IBPB with branch
type prediction flushing, in which case SBPB should be used instead of
IBPB. The current code doesn't allow for that.
Also, cpu_has_ibpb_brtype_microcode() has some surprising side effects
and the setting of these feature bits really doesn't belong in the
mitigation code anyway. Move it to earlier.
Fixes: fb3bd914b3 ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/869a1709abfe13b673bdd10c2f4332ca253a40bc.1693889988.git.jpoimboe@kernel.org
Only Xen is using the paravirt lazy mode code, so it can be moved to
Xen specific sources.
This allows to make some of the functions static or to merge them into
their only call sites.
While at it do a rename from "paravirt" to "xen" for all moved
specifiers.
No functional change.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20230913113828.18421-3-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
The code calling ima_free_kexec_buffer() runs long after the memblock
allocator has already been torn down, potentially resulting in a use
after free in memblock_isolate_range().
With KASAN or KFENCE, this use after free will result in a BUG
from the idle task, and a subsequent kernel panic.
Switch ima_free_kexec_buffer() over to memblock_free_late() to avoid
that bug.
Fixes: fee3ff99bc ("powerpc: Move arch independent ima kexec functions to drivers/of/kexec.c")
Suggested-by: Mike Rappoport <rppt@kernel.org>
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230817135558.67274c83@imladris.surriel.com
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- Fix an UV boot crash
- Skip spurious ENDBR generation on _THIS_IP_
- Fix ENDBR use in putuser() asm methods
- Fix corner case boot crashes on 5-level paging
- and fix a false positive WARNING on LTO kernels"
* tag 'x86-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/purgatory: Remove LTO flags
x86/boot/compressed: Reserve more memory for page tables
x86/ibt: Avoid duplicate ENDBR in __put_user_nocheck*()
x86/ibt: Suppress spurious ENDBR
x86/platform/uv: Use alternate source for socket to node data
Pull scheduler fixes from Ingo Molnar:
"Fix a performance regression on large SMT systems, an Intel SMT4
balancing bug, and a topology setup bug on (Intel) hybrid processors"
* tag 'sched-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sched: Restore the SD_ASYM_PACKING flag in the DIE domain
sched/fair: Fix SMT4 group_smt_balance handling
sched/fair: Optimize should_we_balance() for large SMT systems
The UV code attempts to build a set of tables to allow it to do
bidirectional socket<=>node lookups.
But when nr_cpus is set to a smaller number than actually present, the
cpu_to_node() mapping information for unused CPUs is not available to
build_socket_tables(). This results in skipping some nodes or sockets
when creating the tables and leaving some -1's for later code to trip.
over, causing oopses.
The problem is that the socket<=>node lookups are created by doing a
loop over all CPUs, then looking up the CPU's APICID and socket. But
if a CPU is not present, there is no way to start this lookup.
Instead of looping over all CPUs, take CPUs out of the equation
entirely. Loop over all APICIDs which are mapped to a valid NUMA node.
Then just extract the socket-id from the APICID.
This avoid tripping over disabled CPUs.
Fixes: 8a50c58519 ("x86/platform/uv: UV support for sub-NUMA clustering")
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20230807141730.1117278-1-steve.wahl%40hpe.com
Pull x86 fixes from Ingo Molnar:
"Fix preemption delays in the SGX code, remove unnecessarily
UAPI-exported code, fix a ld.lld linker (in)compatibility quirk and
make the x86 SMP init code a bit more conservative to fix kexec()
lockups"
* tag 'x86-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Break up long non-preemptible delays in sgx_vepc_release()
x86: Remove the arch_calc_vm_prot_bits() macro from the UAPI
x86/build: Fix linker fill bytes quirk/incompatibility for ld.lld
x86/smp: Don't send INIT to non-present and non-booted CPUs
Pull kvm updates from Paolo Bonzini:
"ARM:
- Clean up vCPU targets, always returning generic v8 as the preferred
target
- Trap forwarding infrastructure for nested virtualization (used for
traps that are taken from an L2 guest and are needed by the L1
hypervisor)
- FEAT_TLBIRANGE support to only invalidate specific ranges of
addresses when collapsing a table PTE to a block PTE. This avoids
that the guest refills the TLBs again for addresses that aren't
covered by the table PTE.
- Fix vPMU issues related to handling of PMUver.
- Don't unnecessary align non-stack allocations in the EL2 VA space
- Drop HCR_VIRT_EXCP_MASK, which was never used...
- Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
parameter instead
- Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
- Remove prototypes without implementations
RISC-V:
- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
- Added ONE_REG interface for SATP mode
- Added ONE_REG interface to enable/disable multiple ISA extensions
- Improved error codes returned by ONE_REG interfaces
- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
- Added get-reg-list selftest for KVM RISC-V
s390:
- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
x86:
- Clean up KVM's handling of Intel architectural events
- Intel bugfixes
- Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
debug registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE
update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to
reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
skip it)
- Retry APIC map recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie
the "emergency disabling" behavior to KVM actually being loaded,
and move all of the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
TSC ratio MSR cannot diverge from the default when TSC scaling is
disabled up related code
- Add a framework to allow "caching" feature flags so that KVM can
check if the guest can use a feature without needing to search
guest CPUID
- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
- Fix KVM's handling of !visible guest roots to avoid premature
triple fault injection
- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
API surface that is needed by external users (currently only
KVMGT), and fix a variety of issues in the process
Generic:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
events to pass action specific data without needing to constantly
update the main handlers.
- Drop unused function declarations
Selftests:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts
to use printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
KVM: x86/mmu: Include mmu.h in spte.h
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
KVM: x86/mmu: Disallow guest from using !visible slots for page tables
KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
KVM: x86/mmu: Harden new PGD against roots without shadow pages
KVM: x86/mmu: Add helper to convert root hpa to shadow page
drm/i915/gvt: Drop final dependencies on KVM internal details
KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
KVM: x86/mmu: Assert that correct locks are held for page write-tracking
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
KVM: x86/mmu: Use page-track notifiers iff there are external users
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
KVM: x86: Remove the unused page-track hook track_flush_slot()
drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
KVM: x86: Add a new page-track hook to handle memslot deletion
drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
KVM: x86: Reject memslot MOVE operations if KVMGT is attached
...
On large enclaves we hit the softlockup warning with following call trace:
xa_erase()
sgx_vepc_release()
__fput()
task_work_run()
do_exit()
The latency issue is similar to the one fixed in:
8795359e35 ("x86/sgx: Silence softlockup detection when releasing large enclaves")
The test system has 64GB of enclave memory, and all is assigned to a single VM.
Release of 'vepc' takes a longer time and causes long latencies, which triggers
the softlockup warning.
Add cond_resched() to give other tasks a chance to run and reduce
latencies, which also avoids the softlockup detector.
[ mingo: Rewrote the changelog. ]
Fixes: 540745ddbc ("x86/sgx: Introduce virtual EPC for use by KVM guests")
Reported-by: Yu Zhang <yu.zhang@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Yu Zhang <yu.zhang@ionos.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Haitao Huang <haitao.huang@linux.intel.com>
Cc: stable@vger.kernel.org
With ":text =0xcccc", ld.lld fills unused text area with 0xcccc0000.
Example objdump -D output:
ffffffff82b04203: 00 00 add %al,(%rax)
ffffffff82b04205: cc int3
ffffffff82b04206: cc int3
ffffffff82b04207: 00 00 add %al,(%rax)
ffffffff82b04209: cc int3
ffffffff82b0420a: cc int3
Replace it with ":text =0xcccccccc", so we get the following instead:
ffffffff82b04203: cc int3
ffffffff82b04204: cc int3
ffffffff82b04205: cc int3
ffffffff82b04206: cc int3
ffffffff82b04207: cc int3
ffffffff82b04208: cc int3
gcc/ld doesn't seem to have the same issue. The generated code stays the
same for gcc/ld.
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Fixes: 7705dc8557 ("x86/vmlinux: Use INT3 instead of NOP for linker fill bytes")
Link: https://lore.kernel.org/r/20230906175215.2236033-1-song@kernel.org
Pull hyperv updates from Wei Liu:
- Support for SEV-SNP guests on Hyper-V (Tianyu Lan)
- Support for TDX guests on Hyper-V (Dexuan Cui)
- Use SBRM API in Hyper-V balloon driver (Mitchell Levy)
- Avoid dereferencing ACPI root object handle in VMBus driver (Maciej
Szmigiero)
- A few misecllaneous fixes (Jiapeng Chong, Nathan Chancellor, Saurabh
Sengar)
* tag 'hyperv-next-signed-20230902' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (24 commits)
x86/hyperv: Remove duplicate include
x86/hyperv: Move the code in ivm.c around to avoid unnecessary ifdef's
x86/hyperv: Remove hv_isolation_type_en_snp
x86/hyperv: Use TDX GHCI to access some MSRs in a TDX VM with the paravisor
Drivers: hv: vmbus: Bring the post_msg_page back for TDX VMs with the paravisor
x86/hyperv: Introduce a global variable hyperv_paravisor_present
Drivers: hv: vmbus: Support >64 VPs for a fully enlightened TDX/SNP VM
x86/hyperv: Fix serial console interrupts for fully enlightened TDX guests
Drivers: hv: vmbus: Support fully enlightened TDX guests
x86/hyperv: Support hypercalls for fully enlightened TDX guests
x86/hyperv: Add hv_isolation_type_tdx() to detect TDX guests
x86/hyperv: Fix undefined reference to isolation_type_en_snp without CONFIG_HYPERV
x86/hyperv: Add missing 'inline' to hv_snp_boot_ap() stub
hv: hyperv.h: Replace one-element array with flexible-array member
Drivers: hv: vmbus: Don't dereference ACPI root object handle
x86/hyperv: Add hyperv-specific handling for VMMCALL under SEV-ES
x86/hyperv: Add smp support for SEV-SNP guest
clocksource: hyper-v: Mark hyperv tsc page unencrypted in sev-snp enlightened guest
x86/hyperv: Use vmmcall to implement Hyper-V hypercall in sev-snp enlightened guest
drivers: hv: Mark percpu hvcall input arg page unencrypted in SEV-SNP enlightened guest
...
Vasant reported that kexec() can hang or reset the machine when it tries to
park CPUs via INIT. This happens when the kernel is using extended APIC,
but the present mask has APIC IDs >= 0x100 enumerated.
As extended APIC can only handle 8 bit of APIC ID sending INIT to APIC ID
0x100 sends INIT to APIC ID 0x0. That's the boot CPU which is special on
x86 and INIT causes the system to hang or resets the machine.
Prevent this by sending INIT only to those CPUs which have been booted
once.
Fixes: 45e34c8af5 ("x86/smp: Put CPUs into INIT on shutdown if possible")
Reported-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/87cyzwjbff.ffs@tglx
Pull x86 fixes from Dave Hansen:
"The most important fix here adds a missing CPU model to the recent
Gather Data Sampling (GDS) mitigation list to ensure that mitigations
are available on that CPU.
There are also a pair of warning fixes, and closure of a covert
channel that pops up when protection keys are disabled.
Summary:
- Mark all Skylake CPUs as vulnerable to GDS
- Fix PKRU covert channel
- Fix -Wmissing-variable-declarations warning for ia32_xyz_class
- Fix kernel-doc annotation warning"
* tag 'x86-urgent-2023-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Fix PKRU covert channel
x86/irq/i8259: Fix kernel-doc annotation warning
x86/speculation: Mark all Skylake CPUs as vulnerable to GDS
x86/audit: Fix -Wmissing-variable-declarations warning for ia32_xyz_class
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
nvmem: core: Notify when a new layout is registered
nvmem: core: Do not open-code existing functions
nvmem: core: Return NULL when no nvmem layout is found
nvmem: core: Create all cells before adding the nvmem device
nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
dt-bindings: nvmem: Add compatible for QCM2290
nvmem: Kconfig: Fix typo "drive" -> "driver"
nvmem: Explicitly include correct DT includes
nvmem: add new NXP QorIQ eFuse driver
dt-bindings: nvmem: Add t1023-sfp efuse support
dt-bindings: nvmem: qfprom: Add compatible for MSM8226
nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
nvmem: qfprom: do some cleanup
nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
...
Pull driver core updates from Greg KH:
"Here is a small set of driver core updates and additions for 6.6-rc1.
Included in here are:
- stable kernel documentation updates
- class structure const work from Ivan on various subsystems
- kernfs tweaks
- driver core tests!
- kobject sanity cleanups
- kobject structure reordering to save space
- driver core error code handling fixups
- other minor driver core cleanups
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
driver core: Call in reversed order in device_platform_notify_remove()
driver core: Return proper error code when dev_set_name() fails
kobject: Remove redundant checks for whether ktype is NULL
kobject: Add sanity check for kset->kobj.ktype in kset_register()
drivers: base: test: Add missing MODULE_* macros to root device tests
drivers: base: test: Add missing MODULE_* macros for platform devices tests
drivers: base: Free devm resources when unregistering a device
drivers: base: Add basic devm tests for platform devices
drivers: base: Add basic devm tests for root devices
kernfs: fix missing kernfs_iattr_rwsem locking
docs: stable-kernel-rules: mention that regressions must be prevented
docs: stable-kernel-rules: fine-tune various details
docs: stable-kernel-rules: make the examples for option 1 a proper list
docs: stable-kernel-rules: move text around to improve flow
docs: stable-kernel-rules: improve structure by changing headlines
base/node: Remove duplicated include
kernfs: attach uuid for every kernfs and report it in fsid
kernfs: add stub helper for kernfs_generic_poll()
x86/resctrl: make pseudo_lock_class a static const structure
x86/MSR: make msr_class a static const structure
...
Pull x86 shadow stack support from Dave Hansen:
"This is the long awaited x86 shadow stack support, part of Intel's
Control-flow Enforcement Technology (CET).
CET consists of two related security features: shadow stacks and
indirect branch tracking. This series implements just the shadow stack
part of this feature, and just for userspace.
The main use case for shadow stack is providing protection against
return oriented programming attacks. It works by maintaining a
secondary (shadow) stack using a special memory type that has
protections against modification. When executing a CALL instruction,
the processor pushes the return address to both the normal stack and
to the special permission shadow stack. Upon RET, the processor pops
the shadow stack copy and compares it to the normal stack copy.
For more information, refer to the links below for the earlier
versions of this patch set"
Link: https://lore.kernel.org/lkml/20220130211838.8382-1-rick.p.edgecombe@intel.com/
Link: https://lore.kernel.org/lkml/20230613001108.3040476-1-rick.p.edgecombe@intel.com/
* tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
x86/shstk: Change order of __user in type
x86/ibt: Convert IBT selftest to asm
x86/shstk: Don't retry vm_munmap() on -EINTR
x86/kbuild: Fix Documentation/ reference
x86/shstk: Move arch detail comment out of core mm
x86/shstk: Add ARCH_SHSTK_STATUS
x86/shstk: Add ARCH_SHSTK_UNLOCK
x86: Add PTRACE interface for shadow stack
selftests/x86: Add shadow stack test
x86/cpufeatures: Enable CET CR4 bit for shadow stack
x86/shstk: Wire in shadow stack interface
x86: Expose thread features in /proc/$PID/status
x86/shstk: Support WRSS for userspace
x86/shstk: Introduce map_shadow_stack syscall
x86/shstk: Check that signal frame is shadow stack mem
x86/shstk: Check that SSP is aligned on sigreturn
x86/shstk: Handle signals for shadow stack
x86/shstk: Introduce routines modifying shstk
x86/shstk: Handle thread shadow stack
x86/shstk: Add user-mode shadow stack support
...
The Gather Data Sampling (GDS) vulnerability is common to all Skylake
processors. However, the "client" Skylakes* are now in this list:
https://www.intel.com/content/www/us/en/support/articles/000022396/processors.html
which means they are no longer included for new vulnerabilities here:
https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
or in other GDS documentation. Thus, they were not included in the
original GDS mitigation patches.
Mark SKYLAKE and SKYLAKE_L as vulnerable to GDS to match all the
other Skylake CPUs (which include Kaby Lake). Also group the CPUs
so that the ones that share the exact same vulnerabilities are next
to each other.
Last, move SRBDS to the end of each line. This makes it clear at a
glance that SKYLAKE_X is unique. Of the five Skylakes, it is the
only "server" CPU and has a different implementation from the
clients of the "special register" hardware, making it immune to SRBDS.
This makes the diff much harder to read, but the resulting table is
worth it.
I very much appreciate the report from Michael Zhivich about this
issue. Despite what level of support a hardware vendor is providing,
the kernel very much needs an accurate and up-to-date list of
vulnerable CPUs. More reports like this are very welcome.
* Client Skylakes are CPUID 406E3/506E3 which is family 6, models
0x4E and 0x5E, aka INTEL_FAM6_SKYLAKE and INTEL_FAM6_SKYLAKE_L.
Reported-by: Michael Zhivich <mzhivich@akamai.com>
Fixes: 8974eb5882 ("x86/speculation: Add Gather Data Sampling mitigation")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
KVM x86 changes for 6.6:
- Misc cleanups
- Retry APIC optimized recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie the
"emergency disabling" behavior to KVM actually being loaded, and move all of
the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC
ratio MSR can diverge from the default iff TSC scaling is enabled, and clean
up related code
- Add a framework to allow "caching" feature flags so that KVM can check if
the guest can use a feature without needing to search guest CPUID
Pull x86 apic updates from Dave Hansen:
"This includes a very thorough rework of the 'struct apic' handlers.
Quite a variety of them popped up over the years, especially in the
32-bit days when odd apics were much more in vogue.
The end result speaks for itself, which is a removal of a ton of code
and static calls to replace indirect calls.
If there's any breakage here, it's likely to be around the 32-bit
museum pieces that get light to no testing these days.
Summary:
- Rework apic callbacks, getting rid of unnecessary ones and
coalescing lots of silly duplicates.
- Use static_calls() instead of indirect calls for apic->foo()
- Tons of cleanups an crap removal along the way"
* tag 'x86_apic_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
x86/apic: Turn on static calls
x86/apic: Provide static call infrastructure for APIC callbacks
x86/apic: Wrap IPI calls into helper functions
x86/apic: Mark all hotpath APIC callback wrappers __always_inline
x86/xen/apic: Mark apic __ro_after_init
x86/apic: Convert other overrides to apic_update_callback()
x86/apic: Replace acpi_wake_cpu_handler_update() and apic_set_eoi_cb()
x86/apic: Provide apic_update_callback()
x86/xen/apic: Use standard apic driver mechanism for Xen PV
x86/apic: Provide common init infrastructure
x86/apic: Wrap apic->native_eoi() into a helper
x86/apic: Nuke ack_APIC_irq()
x86/apic: Remove pointless arguments from [native_]eoi_write()
x86/apic/noop: Tidy up the code
x86/apic: Remove pointless NULL initializations
x86/apic: Sanitize APIC ID range validation
x86/apic: Prepare x2APIC for using apic::max_apic_id
x86/apic: Simplify X2APIC ID validation
x86/apic: Add max_apic_id member
x86/apic: Wrap APIC ID validation into an inline
...
Pull x86 core updates from Thomas Gleixner:
- Prevent kprobes on compiler generated CFI checking code.
The compiler generates an instruction sequence for indirect call
checks. If this sequence is modified with a kprobe, then the check
fails. So the instructions must be protected against probing.
- A few minor cleanups for the SMP code
* tag 'x86-core-2023-08-30-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Prohibit probing on compiler generated CFI checking code
x86/smpboot: Change smp_store_boot_cpu_info() to static
x86/smp: Remove a non-existent function declaration
x86/smpboot: Remove a stray comment about CPU hotplug
Pull dma-maping updates from Christoph Hellwig:
- allow dynamic sizing of the swiotlb buffer, to cater for secure
virtualization workloads that require all I/O to be bounce buffered
(Petr Tesarik)
- move a declaration to a header (Arnd Bergmann)
- check for memory region overlap in dma-contiguous (Binglei Wang)
- remove the somewhat dangerous runtime swiotlb-xen enablement and
unexport is_swiotlb_active (Christoph Hellwig, Juergen Gross)
- per-node CMA improvements (Yajun Deng)
* tag 'dma-mapping-6.6-2023-08-29' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: optimize get_max_slots()
swiotlb: move slot allocation explanation comment where it belongs
swiotlb: search the software IO TLB only if the device makes use of it
swiotlb: allocate a new memory pool when existing pools are full
swiotlb: determine potential physical address limit
swiotlb: if swiotlb is full, fall back to a transient memory pool
swiotlb: add a flag whether SWIOTLB is allowed to grow
swiotlb: separate memory pool data from other allocator data
swiotlb: add documentation and rename swiotlb_do_find_slots()
swiotlb: make io_tlb_default_mem local to swiotlb.c
swiotlb: bail out of swiotlb_init_late() if swiotlb is already allocated
dma-contiguous: check for memory region overlap
dma-contiguous: support numa CMA for specified node
dma-contiguous: support per-numa CMA for all architectures
dma-mapping: move arch_dma_set_mask() declaration to header
swiotlb: unexport is_swiotlb_active
x86: always initialize xen-swiotlb when xen-pcifront is enabling
xen/pci: add flag for PCI passthrough being possible
Pull non-MM updates from Andrew Morton:
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options")
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h")
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands")
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions")
- Switch the handling of kdump from a udev scheme to in-kernel
handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
hot un/plug")
- Many singleton patches to various parts of the tree
* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
document while_each_thread(), change first_tid() to use for_each_thread()
drivers/char/mem.c: shrink character device's devlist[] array
x86/crash: optimize CPU changes
crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
crash: hotplug support for kexec_load()
x86/crash: add x86 crash hotplug support
crash: memory and CPU hotplug sysfs attributes
kexec: exclude elfcorehdr from the segment digest
crash: add generic infrastructure for crash hotplug support
crash: move a few code bits to setup support of crash hotplug
kstrtox: consistently use _tolower()
kill do_each_thread()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
scripts/bloat-o-meter: count weak symbol sizes
treewide: drop CONFIG_EMBEDDED
lockdep: fix static memory detection even more
lib/vsprintf: declare no_hash_pointers in sprintf.h
lib/vsprintf: split out sprintf() and friends
kernel/fork: stop playing lockless games for exe_file replacement
adfs: delete unused "union adfs_dirtail" definition
...
Pull misc x86 cleanups from Ingo Molnar:
"The following commit deserves special mention:
22dc02f81c Revert "sched/fair: Move unused stub functions to header"
This is in x86/cleanups, because the revert is a re-application of a
number of cleanups that got removed inadvertedly"
[ This also effectively undoes the amd_check_microcode() microcode
declaration change I had done in my microcode loader merge in commit
42a7f6e3ff ("Merge tag 'x86_microcode_for_v6.6_rc1' [...]").
I picked the declaration change by Arnd from this branch instead,
which put it in <asm/processor.h> instead of <asm/microcode.h> like I
had done in my merge resolution - Linus ]
* tag 'x86-cleanups-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/uv: Refactor code using deprecated strncpy() interface to use strscpy()
x86/hpet: Refactor code using deprecated strncpy() interface to use strscpy()
x86/platform/uv: Refactor code using deprecated strcpy()/strncpy() interfaces to use strscpy()
x86/qspinlock-paravirt: Fix missing-prototype warning
x86/paravirt: Silence unused native_pv_lock_init() function warning
x86/alternative: Add a __alt_reloc_selftest() prototype
x86/purgatory: Include header for warn() declaration
x86/asm: Avoid unneeded __div64_32 function definition
Revert "sched/fair: Move unused stub functions to header"
x86/apic: Hide unused safe_smp_processor_id() on 32-bit UP
x86/cpu: Fix amd_check_microcode() declaration
Pull scheduler updates from Ingo Molnar:
- The biggest change is introduction of a new iteration of the
SCHED_FAIR interactivity code: the EEVDF ("Earliest Eligible Virtual
Deadline First") scheduler
EEVDF too is a virtual-time scheduler, with two parameters (weight
and relative deadline), compared to CFS that had weight only. It
completely reworks the base scheduler: placement, preemption, picking
-- everything
LWN.net, as usual, has a terrific writeup about EEVDF:
https://lwn.net/Articles/925371/
Preemption (both tick and wakeup) is driven by testing against a
fresh pick. Because the tree is now effectively an interval tree, and
the selection is no longer the 'leftmost' task, over-scheduling is
less of a problem. A lot of the CFS heuristics are removed or
replaced by more natural latency-space parameters & constructs
In terms of expected performance regressions: we will and can fix
everything where a 'good' workload misbehaves with the new scheduler,
but EEVDF inevitably changes workload scheduling in a binary fashion,
hopefully for the better in the overwhelming majority of cases, but
in some cases it won't, especially in adversarial loads that got
lucky with the previous code, such as some variants of hackbench. We
are trying hard to err on the side of fixing all performance
regressions, but we expect some inevitable post-release iterations of
that process
- Improve load-balancing on hybrid x86 systems: enable cluster
scheduling (again)
- Improve & fix bandwidth-scheduling on nohz systems
- Improve bandwidth-throttling
- Use lock guards to simplify and de-goto-ify control flow
- Misc improvements, cleanups and fixes
* tag 'sched-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
sched/eevdf/doc: Modify the documented knob to base_slice_ns as well
sched/eevdf: Curb wakeup-preemption
sched: Simplify sched_core_cpu_{starting,deactivate}()
sched: Simplify try_steal_cookie()
sched: Simplify sched_tick_remote()
sched: Simplify sched_exec()
sched: Simplify ttwu()
sched: Simplify wake_up_if_idle()
sched: Simplify: migrate_swap_stop()
sched: Simplify sysctl_sched_uclamp_handler()
sched: Simplify get_nohz_timer_target()
sched/rt: sysctl_sched_rr_timeslice show default timeslice after reset
sched/rt: Fix sysctl_sched_rr_timeslice intial value
sched/fair: Block nohz tick_stop when cfs bandwidth in use
sched, cgroup: Restore meaning to hierarchical_quota
MAINTAINERS: Add Peter explicitly to the psi section
sched/psi: Select KERNFS as needed
sched/topology: Align group flags when removing degenerate domain
sched/fair: remove util_est boosting
sched/fair: Propagate enqueue flags into place_entity()
...
Pull x86 microcode loading updates from Borislav Petkov:
"The first, cleanup part of the microcode loader reorg tglx has been
working on. The other part wasn't fully ready in time so it will
follow on later.
This part makes the loader core code as it is practically enabled on
pretty much every baremetal machine so there's no need to have the
Kconfig items.
In addition, there are cleanups which prepare for future feature
enablement"
* tag 'x86_microcode_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Remove remaining references to CONFIG_MICROCODE_AMD
x86/microcode/intel: Remove pointless mutex
x86/microcode/intel: Remove debug code
x86/microcode: Move core specific defines to local header
x86/microcode/intel: Rename get_datasize() since its used externally
x86/microcode: Make reload_early_microcode() static
x86/microcode: Include vendor headers into microcode.h
x86/microcode/intel: Move microcode functions out of cpu/intel.c
x86/microcode: Hide the config knob
x86/mm: Remove unused microcode.h include
x86/microcode: Remove microcode_mutex
x86/microcode/AMD: Rip out static buffers
Pull x86 SEV updates from Borislav Petkov:
- Handle the case where the beginning virtual address of the address
range whose SEV encryption status needs to change, is not page
aligned so that callers which round up the number of pages to be
decrypted, would mark a trailing page as decrypted and thus cause
corruption during live migration.
- Return an error from the #VC handler on AMD SEV-* guests when the
debug registers swapping is enabled as a DR7 access should not happen
then - that register is guest/host switched.
* tag 'x86_sev_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Make enc_dec_hypercall() accept a size instead of npages
x86/sev: Do not handle #VC for DR7 read/write
Pull x86 RAS updates from Borislav Petkov:
- Add a quirk for AMD Zen machines where Instruction Fetch unit poison
consumption MCEs are not delivered synchronously but still within the
same context, which can lead to erroneously increased error severity
and unneeded kernel panics
- Do not log errors caught by polling shared MCA banks as they
materialize as duplicated error records otherwise
* tag 'ras_core_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/MCE: Always save CS register on AMD Zen IF Poison errors
x86/mce: Prevent duplicate error records
Pull misc x86 updates from Borislav Petkov:
- Add PCI device IDs for a new AMD family 0x1a CPUs and use them in the
respective drivers
- Update HPE Superdome Flex maintainers list
* tag 'x86_misc_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/uv: Update HPE Superdome Flex Maintainers
EDAC/amd64: Add support for AMD family 1Ah models 00h-1Fh and 40h-4Fh
hwmon: (k10temp) Add thermal support for AMD Family 1Ah-based models
x86/amd_nb: Add PCI IDs for AMD Family 1Ah-based models
Pull x86 boot updates from Borislav Petkov:
"Avoid the baremetal decompressor code when booting on an EFI machine.
This is mandated by the current tightening of EFI executables
requirements when used in a secure boot scenario. More specifically,
an EFI executable cannot have a single section with RWX permissions,
which conflicts with the in-place kernel decompression that is done
today.
Instead, the things required by the booting kernel image are done in
the EFI stub now.
Work by Ard Biesheuvel"
* tag 'x86_boot_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/efistub: Avoid legacy decompressor when doing EFI boot
x86/efistub: Perform SNP feature test while running in the firmware
efi/libstub: Add limit argument to efi_random_alloc()
x86/decompressor: Factor out kernel decompression and relocation
x86/decompressor: Move global symbol references to C code
decompress: Use 8 byte alignment
x86/efistub: Prefer EFI memory attributes protocol over DXE services
x86/efistub: Perform 4/5 level paging switch from the stub
x86/decompressor: Merge trampoline cleanup with switching code
x86/decompressor: Pass pgtable address to trampoline directly
x86/decompressor: Only call the trampoline when changing paging levels
x86/decompressor: Call trampoline directly from C code
x86/decompressor: Avoid the need for a stack in the 32-bit trampoline
x86/decompressor: Use standard calling convention for trampoline
x86/decompressor: Call trampoline as a normal function
x86/decompressor: Assign paging related global variables earlier
x86/decompressor: Store boot_params pointer in callee save register
x86/efistub: Clear BSS in EFI handover protocol entrypoint
x86/decompressor: Avoid magic offsets for EFI handover entrypoint
x86/efistub: Simplify and clean up handover entry code
...
