Enable sva error interrupt event. When an error occurs on
the sva module, the device reports an abnormal interrupt to
the driver.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The last register logic and different register logic are combined.
Use "u32" instead of 'int' in the regs function input parameter to
simplify some checks.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In hpre_remove(), when the disable operation of qm sriov failed,
the following logic should continue to be executed to release the
remaining resources that have been allocated, instead of returning
directly, otherwise there will be resource leakage.
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The value of qm algorithm can change dynamically according to the
value of the capability register.
Add xxx_set_qm_algs() function to obtain the algs that the
hardware device supported from the capability register and set
them into usr mode attribute files.
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hardware V3 and later versions support get error type from
registers. To be compatible with later hardware versions,
get error type from registers instead of fixed marco.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before hardware V3, hardwares do not provide the feature registers,
driver resolves hardware differences based on the hardware version.
As a result, the driver does not support the new hardware.
Hardware V3 and later versions support to obtain hardware features,
such as power-gating management and doorbell isolation, through
the hardware registers. To be compatible with later hardware versions,
the features of the current device is obtained by reading the
hardware registers instead of the hardware version.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1. Add some debugging registers.
2. Add last word dumping function during hpre engine controller reset.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The value of the register is changed after the task running. A debugfs
file node is added to help users to check the change of register values.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The accelerator devices support runtime PM, when device is in suspended, an
exception will occur if reading registers. Therefore, this patch uses
'debugfs_create_file' instead of 'debugfs_create_regset32' to create
debugfs file, and then the driver can get the device status before
reading the register.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 hpre device supports dynamic clock gating. When doing tasks,
the algorithm core is opened, and when idle, the algorithm core is closed.
This patch enables hpre dynamic clock gating by writing hardware registers.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The HPRE driver support configure each function's QoS in the Host
for Kunpeng930. The HPRE driver needs to configure the maximum shaper
type rate.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 hardware supports address prefetching to improve performance
before doing tasks in SVA scenario.
This patch enables this function in device initialization by writing
hardware registers. In the process of reset, address prefetching is
disabled to avoid the failure of interaction between accelerator device
and SMMU.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 could be able to close master ooo when NFE occurs, which will
disable memory accessing from device and execute tasks. This ensures that
errors do not spread.
This patch enables the hardware to close master ooo when an error occurs
by writing hardware registers, and ensures that the driver will not drain
qp because the hardware will empty the tasks automatically.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to avoid reporting an exception but the error type is not
configured, the driver needs to configure the error type first, and then
enable the error interrupt. Before executing the task, hardware error
initialization is needed so that the hardware can detect the error in time.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Functional macro lacks type checking, which is not as strict as function
call checking.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'err_info' does not support dynamic configuration since it is const type.
Therefore, in order to support new error type later, 'err_info' is changed
to dynamic configuration.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'hpre_cfg_by_dsm' has checked and printed error path internally. It is not
necessary to do it here, so remove it.
It should return error immediately when return value of 'hpre_cfg_by_dsm'
is non-zero, and no need to execute the remaining sentences.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the code related to 'CURRENT_QM' debugfs is exactly same in
sec/hpre/zip driver, move 'CURRENT_QM' to qm.c to reduce duplicate code.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the configuration of the total number of queues 'ctrl_qp_num'
from sec2/hpre/zip to qm.c. And get the total number of queues
from the hardware register for Kunpeng930.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable PASID by setting 'sqc' and 'cqc' pasid bits
per queue in Kunpeng 930.
For Kunpeng 920, PASID is effective for all queues once set
in SVA scenarios.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
HPRE of Kunpeng 930 is updated on cluster numbers,
so we try to update this driver to make it running
okay on Kunpeng920/Kunpeng930 chips.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1.One CE error is detecting timeout of generating a random number.
2.Another is detecting timeout of SVA prefetching address.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Delete 'HPRE_RAS_ECC1BIT_TH' register setting of hpre,
since register 'QM_RAS_CE_THRESHOLD' of qm has done this work.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to pass kernel CRYPTO test, HPRE module parameter
'pf_q_num' needs to be set as greater than 1.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the devices are removed or not existing, the corresponding algorithms
which are registered by 'hisi-zip' driver can't be used.
Move 'hisi_zip_register_to_crypto' from 'hisi_zip_init' to
'hisi_zip_probe'. The algorithms will be registered to crypto only when
there is device bind on the driver. And when the devices are removed,
the algorithms will be unregistered.
In the previous process, the function 'xxx_register_to_crypto' need a lock
and a static variable to judge if the registration is the first time.
Move this action into the function 'hisi_qm_alg_register'. Each device
will call 'hisi_qm_alg_register' to add itself to qm list in probe process
and registering algs when the qm list is empty.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
