clang with W=1 reports
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_int_process_v11.c:282:38: error: variable
'sq_int_priv' set but not used [-Werror,-Wunused-but-set-variable]
uint8_t sq_int_enc, sq_int_errtype, sq_int_priv;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix these warnings by adding & deleting the deviant arguments.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_migrate.c:671: warning: Function parameter or member 'node' not described in 'svm_migrate_vma_to_ram'
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_migrate.c:671: warning: Function parameter or member 'trigger' not described in 'svm_migrate_vma_to_ram'
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_migrate.c:671: warning: Function parameter or member 'fault_page' not described in 'svm_migrate_vma_to_ram'
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_migrate.c:671: warning: Excess function parameter 'adev' description in 'svm_migrate_vma_to_ram'
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_migrate.c:771: warning: Function parameter or member 'fault_page' not described in 'svm_migrate_vram_to_ram'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a return error is raised during validation and mapping of a
prange, this flag is set. It is a rare occurrence, but it could happen
when `amdgpu_hmm_range_get_pages_done` returns true. In such cases,
the caller should retry. However, it is important to ensure that the
prange is updated correctly during the retry.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for_each_inst modifies xcc_mask and therefore the loop doesn't
initialize properly interrupts on all pipes. Keep looping through xcc as
the outer loop to fix this issue.
Fixes: c4050ff1a4 ("drm/amdkfd: Use xcc mask for identifying xcc")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Certain boards with GC IP 11.0.3 need slightly different handling
in the shader compiler due to board specific bounding box
optimizations.
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allocate large local variable on heap to avoid exceeding the
stack size:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c: In function ‘svm_range_validate_and_map’:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:1690:1: warning: the frame size of 2360 bytes is larger than 2048 bytes [-Wframe-larger-than=]
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rework logic or use do_div() to avoid problems on 32 bit.
v2: add a missing case for XCP macro
v3: fix out of bounds array access
v4: fix xcp handling harder
Acked-by: Guchun Chen <guchun.chen@amd.com> (v1)
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com> (v3)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not all the asic needs xcp. ensure check xcp availabity
before accessing its member.
v2: add missing change in kfd_topology.c
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename smv_migrate_init to a better name kgd2kfd_init_zone_device
because it setup zone devive pgmap for page migration and keep it in
kfd_migrate.c to access static functions svm_migrate_pgmap_ops. Call it
only once in amdgpu_device_ip_init after adev ip blocks are initialized,
but before amdgpu_amdkfd_device_init initialize kfd nodes which enable
SVM support based on pgmap.
svm_range_set_max_pages is called by kgd2kfd_device_init everytime after
switching compute partition mode.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
svm_migrate_init set the max svm range pages based on the KFD nodes
partition size. APU mode don't init pgmap because there is no migration.
kgd2kfd_device_init calls svm_migrate_init after KFD nodes allocation
and initialization.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes memory reporting on the GFX 9.4.3 APU and dGPU
by reporting available memory on a per partition basis. If its an
APU, available and used memory calculations take into account
system and TTM memory.
v2: squash in fix ("drm/amdkfd: Fix array out of bound warning")
squash in fix ("drm/amdgpu: Update memory reporting for GFX9.4.3")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to track memory usage on a per partition basis. To do
that, store the local memory information in KFD node instead
of kfd device.
v2: squash in fix ("amdkfd: Use mem_id to access mem_partition info")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd_ioctl_get_dmabuf use the amdgpu bo xcp_id to get the gpu_id of the
KFD node from the exported dmabuf_adev, and then create kfd bo on the
correct adev and KFD node when importing the amdgpu bo to KFD.
Remove function kfd_device_by_adev, it is not needed as it is the same
result as dmabuf_adev->kfd.dev->nodes[0]->id.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For memory accounting per compute partition and export drm amdgpu bo and
then import to KFD, we need the xcp id to account the memory usage or
find the KFD node of the original amdgpu bo to create the KFD bo on the
correct adev KFD node.
Set xcp_id_plus1 of amdgpu_bo_param to create bo and store xcp_id to
amddgpu bo. Add helper macro to get the mem_id from adev and xcp_id.
v2: squash in fix ("drm/amdgpu: Fix BO creation failure on GFX 9.4.3 dGPU")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use MTYPE RW/MTYPE_CC for mapping system memory or VRAM to KFD node
within the same memory partition, use MTYPE_NC for mapping on KFD node
from the far memory partition of the same socket or from another socket
on same XGMI hive.
On NPS4 or 4P system, MTYPE will be overridden per page depending on
the memory NUMA node id and vm->mem_id.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass kfd node->xcp->mem_id to amdgpu bo create parameter mem_id_plus1 to
allocate new svm_bo on the specified memory partition.
This is only for dGPU mode as we don't migrate with APU mode.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Show KFD node memory partition id and size, add helper function
KFD_XCP_MEMORY_SIZE to get kfd node memory size, will be used
later to support memory accounting per partition.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
From KFD topology, application will find kfd node with the corresponding
drm device node minor number, for example if partition drm node starts
from /dev/dri/renderD129, then KFD node 0 with store drm node minor
number 129. Application will open drm node /dev/dri/renderD129 to create
amdgpu vm for kfd node 0 with the correct vm->mem_id to indicate the
memory partition.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Selects the MTYPE to be used for local memory,
(0 = MTYPE_CC (default), 1 = MTYPE_NC, 2 = MTYPE_RW)
v2: squash in build fix (Alex)
Reviewed-by: Graham Sider <Graham.Sider@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Treat system memory on NUMA systems as remote by default. Overriding with
a more efficient MTYPE per page will be implemented in the next patch.
No need for a special case for APP APUs. System memory is handled the same
for carve-out and native mode. And VRAM doesn't exist in native mode.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-and-tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By default, set use_mtype_cc_wa to 1 to set PTE coherence flag MTYPE_CC
instead of MTYPE_RW by default. This is required for the time being to
mitigate a bug causing XCCs to hit stale data due to TCC marking fully
dirty lines as exclusive.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VRAM pgmap resource is allocated every time when switching compute
partitions because kfd_dev is re-initialized by post_partition_switch,
As a result, it causes memory region resource leaking and system
memory usage accounting unbalanced.
pgmap resource should be allocated and registered only once when loading
driver and freed when unloading driver, move it from kfd_dev to
amdgpu_kfd_dev.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Increase the maximum number of queues that can be created per process
to 255 on GFX 9.4.3. There is no HWS limitation restricting the number
queues that can be created.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of start xcc id and number of xcc per node, use the xcc mask
which is the mask of logical ids of xccs belonging to a parition.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd_flush_tlb_after_unmap should return true for GFX v9.4.3, to do TLB
heavyweight flush after unmapping from GPU to guarantee that the GPU
will not access pages after they have been unmapped. This also helps
improve the mapping to GPU performance.
Without this, KFD accidently flush TLB after mapping to GPU because the
vm update sequence number is increased by previous unmapping.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch enables SVM capability on GFX9.4.3 when
run in Native mode. It also sets best_prefetch and
best_restore locations to CPU as there is no VRAM.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not required to take lock on all cases while querying partition
mode. Querying partition mode during KFD init process doesn't need to
take a lock. Init process after a switch will already be happening under
lock. Control the behaviour by adding flags to xcp_query_partition_mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[For 1P NPS1 mode driver bringup]
Changes required to initialize the amdgpu driver with frontdoor firmware
loading and discovery=2 with the native mode SBIOS that enables CPU GPU
unified interleaved memory.
sudo modprobe amdgpu discovery=2
Once PSP TMR region is reported via the ACPI interface, the dependency
on the ip_discovery.bin will be removed.
Choice of where to allocate driver table is given to each IP version. In
general, both GTT and VRAM domains will be considered. If one of the
tables has a strict restriction for VRAM domain, then only VRAM domain
is considered.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
(lijo: Modified the handling for SMU Tables)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a CPU and GPU are xGMI connected but the GPU is hiveless with
respect to other GPUs, create a new CPU-GPU hive using the GPU's PCI
device location ID as the new hive ID to maintain fine grain memory
access usage.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd node allocation outside kfd->num_nodes loop is not needed and causes
memory leak because kfd->num_nodes is at least equal to 1.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFXIP 9.4.3 could be in APU or carveout mode but we cannot use the
xgmi.connected_to_cpu flag to identify the iolinks type. Use appropriate
APU or Carveout mode based condition to report xgmi connection in kfd
topology.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GFX v9_4_3, set MTYPE_UC for memory access over PCIe.
v4 - add missing indentation pointed out by Felix and add his
reviewed-by tag.
v3 - add missing logic for the svm path.
v2 - add amdgpu_xgmi_same_hive to separate access over xgmi from pcie
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Setup rolling current_logical_xcc_id in MQD for GFX9.4.3
to ensure each queue starts at a different place and prevent
hotspotting issues. Also, remove updating current_logical_xcc_id
during queue update.
Suggested-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In GFX 9.4.3, there can be more than 8 SDMA engines.
As a result, extended_engine_sel and engine_sel fields
in MAP_QUEUES packet need to be updated to allow correct
mapping of SDMA queues to these SDMA engines.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GFXv9.4.3, use SOC level partition switch implementation rather than
keeping them at GFX IP level. Change the exisiting implementation in
GFX IP for keeping partition mode and restrict it to only GFX related
switch.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update interrupt handling in CPX mode for GFX9.4.3 by using the
VMID space instead of SDMA client id to determine if an interrupt
should be processed by a KFD node. This is especially needed for
handling retry faults from MMHUB.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GFX 9.4.3, there can be multiple KFD nodes. As a result,
SMI events for SVM, queue evict/restore should be raised for
each node independently.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This work is required for GC 9.4.3, previous to support memory
partitions per node at SVM. When multiple partition is configured,
every BO should be allocated inside one specific partition which
corresponds to the current amdgpu_device and kfd_node.
v2: squash in compilation fix (Alex)
v3: squash in fix for pre-gfx 9.4.3 (Alex)
v4: squash in best_loc fix (Alex)
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX9.4.3 will support dynamic repartitioning of the GPU through sysfs.
Add device repartitioning support in KFD to repartition GPU from one
mode to other.
v2: squash in fix ("drm/amdkfd: Fix warning kgd2kfd_unlock_kfd defined but not used")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, even if kfd_locked is set, a process is first
created and then removed to work around a race condition
in updating kfd_locked flag. Rework kfd_locked handling to
ensure no processes is created if kfd_locked is set. This
is achieved by updating kfd_locked under kfd_processes_mutex.
With this there is no need for kfd_locked to be an atomic
counter. Instead, it can be a regular integer.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GC 9.4.3, we are removing the EOP buffer.
If we specify 0 for the size, CP_HQD_EOP_CONTROL ends up with
incorrect value as order_size_2 calculations does not handle 0.
Fix it by using zero for the MQD entry for EOP size 0.
v2: Reworked code with a conditional assignment and fixed style issues.
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of number of XCCs, keep a mask of XCCs for the exact XCCs
available on the ASIC. XCC configuration could differ based on
different ASIC configs.
v2:
Rename num_xcd to num_xcc (Hawking)
Use smaller xcc_mask size, changed to u16 (Le)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
