[why]
Secondary DPP pipes are used for rendering secondary layers of planes.
The name "for layer" doesn't make it obvious. The function is acquiring
a free pipe as secondary dpp pipe only. We rename it so it is more obvious.
In a future follow up change, we want to add functions to acquire free pipe as
opp head pipe or otg master pipe as well. They will have their separate
allocation priority.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Preivous algorithm for finding an optimal idle pipe for a new plane was
implemented to handle dynamic pipe allocation when MPO plane moves
from one ODM slice to the other. Now pipe allocation is more static so
it no longer depends on the MPO plane's position. We are simplifying
our logic and remove unnecessary handling in our code.
[how]
Apply a new simplified version of pipe resource allocation logic to reduce
unnecessary flip delay caused by swapping secondary dpp pipe to other
MPC blending tree.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- SubVP high refresh should only be enabled if all displays
are >= 120hz. We do not want to accidentally enables configs
such as 60hz[SubVP] + 120hz[SubVP]
- Ensure that the SubVP config generation code does not produce
configs such as 60hz[SubVP] + 120hz[SubVP]
- Also add admissibility checks to ensure these configs do not
pass as valid configs
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We only gain a benefit of using the ODM2:1 dynamic policy if it allow us
to decrease DISPCLK to use the VMIN freq. If the display config can
already achieve VMIN DISPCLK freq without ODM2:1, don't apply the
policy.
This patch was reverted but that causes some IGT regressions. To
unblock, the patch is being applied again until IGT failures are
fixed.
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
This reverts commit 047783cdd5 since it
causes higher power consumption for single display use case (4k60).
Also, this patch introduced a 35% performance drop in a Vulkan benchmark.
* The patch disabled the ODM-combination on most popular monitors, including 4K, 2K and FHD monitors at 60Hz.
* ODM-combination can halve the DPP clock to save power, that is the reason why we introduce ODM-combination, and the PM log shows single pipe consumes more power at 4K@60Hz.
* ODM-combination has 2 de-tiled buffer involved, which provides longer self-sustained time, that benefit to the memory power optimization.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Some 1920x1080@60hz displays have VBLANK time > 600us which we
still want to accept for FPO + Vactive configs based on testing
- Increase max VBLANK time to 1000us to allow these configs
for FPO + Vactive
- Increase minimum vactive switch margin for FPO + Vactive to 200us
- Based on testing, 1920x1080@120hz can have a switch margin
of ~160us which requires significantly longer FPO stretch
margin (5ms) which we don't want to accept for now
- Also move margins into debug option
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Add debug option to enable SubVP for high refresh rate displays
- For now limit the enabled modes based on a table in debug options
- Currently disabled by default
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- When determining FPO support, include FPO + VActive support
- Support FPO + VActive if one display meets regular requirements
for FPO and the second display is able to switch in VACTIVE with
a given amount of margin
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and How]
Current implementation requires FPGA builds to take a different
code path from DCN32 to write to OTG_PIXEL_RATE_DIV. Now that
we have a workaround to write to OTG_PIXEL_RATE_DIV register without
blanking display on hotplug on DCN32, we can allow the code paths for
FPGA to be exactly the same allowing for more consistent
testing.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Single 4K60 playing YUV420 MPO video blocks P-State because
the required VRatio for prefetch is too high (luma plane for
YUV420 is 1bpe, so swath height is 16 and prefetch requires
more lines)
- Allow max vratio per plane to be 7.9 for single display YUV420
MPO video cases
- Ensure that global vratio prefetch (i.e. total prefetch BW vs.
total active bandwidth) does not excited 4.0
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MALL size available can vary for different SKUs.
Use num_chans read from VBIOS to determine the available MALL size we can use
[How]
Define max_chans for DCN32 and DCN321.
If num_chans is max_chans, then return max_chans as we can access the
entire MALL space.
Otherwise, define avail_chans as the number of available channels we are
allowed instead.
Return corresponding number of channels back and use this to calculate
available MALL size.
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Set init frequency for DCFCLK DS
- For now choose 10Mhz after turning off all pipes on init
- DCN32 spreadsheet shows 8Mhz is min for any display config
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- We cannot enable subvp on PSR panels because when
PSR is active, HUBP is turned off and we cannot rely
on the HUBP vline interrupt
- When in PSR, surface data also cannot be prefetched to MALL
because the main HUBP will be off
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MALL SS and Subvp use the same calculations for determining the size of
the required allocation for a given surface, which is already done in
DML. Add an interface to extract this information from VBA variables and
use in their respective helper functions. Also refactor existing code to
remove stale workarounds.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- FW scheduling algorithm doesn't take into account of it's
a center timing
- This affects where the subvp mclk switch can be scheduled
(prevents HUBP vline interrupt from coming in if scheduled
incorrectly)
- Block subvp center timing cases for now
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- When entering into a SubVP config that requires a minimal
transition we need to retain phantom pipes and also restore
the mall config
- This is because the min transition will remove phantom pipes
from the context (shallow copy) and not restore it's original
state
- This is just a workaround, and needs a proper fix
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- This is a workaround to avoid concurrency issues -- a fast update
creates a shallow copy of the dc current_state, and removes all
subvp/phantom related flags.
- We want to prevent the fast update thread from removing those
flags in case there's another thread running that requires
the info for proper programming
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- If we fail validation, we should retain the phantom
stream/planes
- Full updates assume that phantom pipes will be fully
removed, but if validation fails we keep the phantom
pipes
- Therefore we have to retain the plane/stream if validation
fails (since the refcount is decremented before validation,
and the expectation is that it's fully freed when the old
dc_state is released)
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
HW recommend we enable this for better DF QoS for DCN 3.2.x
[how]
Add interfaces to hubbub to program register
Add initialization as part of init_hw
Add default settings for DCN 3.2.x
Add registry override for debug/tuning
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- For SubVP pipe split case we need to use a minimial transition
when opening MPO video since we are transitioning from 4 pipes
to 3 pipes where an OPP for a previous MPCC will change
- Also save and restore mall config when doing fast_validate in case
there was a shallow copy of the dc->current_state
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We only gain a benefit of using the ODM2:1 dynamic policy if it allow us
to decrease DISPCLK to use the VMIN freq. If the display config can
already achieve VMIN DISPCLK freq without ODM2:1, don't apply the
policy.
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
- Pipe split prediction previously only took into
account MPC split. We must also consider when
ODM combine is required, and when we apply ODM
combine by policy.
- Also re-work DET allocation function as it wasn't
properly splitting the DET per stream, per plane.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Fix the instatiation sequence for MPC registers and add a few other
missing register definitions that were ommited erroneously when copying
them over to enable runtime initialization of reigster offsets for
DCN32/321
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
I2C register name starts with 1, unlike other registers that start with
0. This creates a problem with the new register macro refactoring when
I2C HW objects are created in an array.
[How]
Correct I2C register offset by making a new macro to account for array
offset.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC was using compile time initialization of register addresses using
SR_* macros and their variants. These have been converted to use runtime
initialization.
The REG_STRUCT macro is a definition that is added to SR_* macros.
During initialization, this must be defined before SR_* macros are
invoked, which are in turn invoked through various IP initialization macros.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In single display ODM combine mode, two MPO videos ( three
planes ) are not working
[How]
When we detect three planes, don't set odm combine 2to1 policy
for the MPO planes. Otherwise, we run out of pipes available
Add support for two MPO videos in dc_add_plane_to_context().
Don't allow both videos to be on the same side of the
display.
Add extra check when fetching free pipe for two MPO videos.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It looks like many of the code related to SubVP uses FPU operation, and
we have many static functions that are part of this feature. This commit
is a little bit large, but it only moves SubVP operation from one file
to another, and I had to do it in a single change due to dependencies
between functions.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The insert_entry_into_table_sorted function uses FPU operation and calls
other static functions support. This commit moves the insert entry
function with all the required struct and static functions to the FPU
file.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function dcn32_predict_pipe_split uses FPU operations. This commit
moves this function to the dcn32_fpu file, and we ensure that we only
invoke it under the kernel_fpu protection.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For certain MPO configurations, DML will split a pipe after DET buffer has
already been allocated by driver, resulting in allocation of more DET
segments than the configurable return buffer has, causing underflow.
[How]
Determine during DET override calculation whether or not a pipe will be
split later on by DML, and distribute DET segments based on expected
number of pipes.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit enables the SubVP feature. To achieve that, we need to:
- Don't force p-state disallow on SubVP (can't block dummy p-state)
- Send calculated watermark to DMCUB for SubVP
- Adjust CAB mode message to PMFW
- Add a proper locking sequence for SubVP
- Various fixes to SubVP static analysis and determining SubVP config
- Currently SubVP not supported with pipe split so merge all pipes
before setting up SubVp
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
