[Why]
DSC config is calculated separately from DML calculations.
DML should use these separately calculated DSC params. The issue is
that the calculated bpp is not properly propagated into DML.
[How]
Correctly used forced_bpp value in DML.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN32 DSC delay calculation had an unintentional integer division,
resulting in a mismatch against the DML spreadsheet.
[How]
Cast numerator to double before performing the division.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
rn_vbios_smu_set_dcn_low_power_state() produces a valid warning with
gcc-13:
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.c:237:6: error: conflicting types for 'rn_vbios_smu_set_dcn_low_power_state' due to enum/integer mismatch; have 'void(struct clk_mgr_internal *, enum dcn_pwr_state)'
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.h:36:6: note: previous declaration of 'rn_vbios_smu_set_dcn_low_power_state' with type 'void(struct clk_mgr_internal *, int)'
I.e. the type of the 2nd parameter of
rn_vbios_smu_set_dcn_low_power_state() in the declaration is int, while
the definition spells enum dcn_pwr_state. Synchronize them to the
latter (and add a forward enum declaration).
Cc: Martin Liska <mliska@suse.cz>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC version 3.2.210 brings along the following:
- Investigate tool reported FCLK P-state deviations
- Fix null pointer issues found in emulation
- Add DSC delay factor workaround
- Round up DST_after_scaler to nearest int
- Use forced DSC bpp in DML
- Fix DCN32 DSC delay calculation
- Add a debug option HBR2CP2520 over TPS4
- Stop waiting for vblank during pipe programming
- Modify checks to enable TPS3 pattern when required
- Remove rate check from pixel rate divider update
- Check validation passed after applying pipe split changes
- Update DML formula
- Don't enable ODM + MPO
- Include virtual signal to set k1 and k2 values
- Reinit DPG when exiting dynamic ODM
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Fix for some of the tool reported modes for FCLK
P-state deviations and UCLK P-state deviations that
are coming from DSC terms and/or Scaling terms
causing MinActiveFCLKChangeLatencySupported
and MaxActiveDRAMClockChangeLatencySupported
incorrectly calculated in DML for these configurations.
Reviewed-by: Chaitanya Dhere <Chaitanya.Dhere@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Certain 4K high refresh rate modes requiring DSC are exhibiting top
of screen underflow corruption. Increasing the DSC delay by a factor
of 6 percent stops the underflow for most use cases.
[How]
Multiply DSC delay requirement in DML by a factor.
Add debug option to make this DSC delay factor configurable.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DSC config is calculated separately from DML calculations.
DML should use these separately calculated DSC params. The issue is
that the calculated bpp is not properly propagated into DML.
[How]
Correctly used forced_bpp value in DML.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN32 DSC delay calculation had an unintentional integer division,
resulting in a mismatch against the DML spreadsheet.
[How]
Cast numerator to double before performing the division.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why and how]
This line was originally removed for a compliance issue, but then
reverted as it caused a fringe underflow case.
However, the addition of this line caused a underflow regression
when subVP is on, and it needs to be removed again. We plan to
fix subvp underflow and then re-add in this line. After that,
we will investigate what to do next for the compliance issue.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
Validation can fail for configurations that were previously supported, by only
changing parameters such as the DET allocations, which is currently unexpected.
[HOW?]
Add a check that validation passes after applying pipe split related changes.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As of commit 09a5df6c44 ("drm/amd/display: Fix multi-display support
for idle opt workqueue"), vblank_lock is no longer being used. So, don't
init it in amdgpu_dm_init() and remove it from struct
amdgpu_display_manager.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pipes[pipe_cnt].pipe.src.dcc_fraction_of_zs_req_luma = 0;
pipes[pipe_cnt].pipe.src.dcc_fraction_of_zs_req_chroma = 0;
these two operations in dcn32/dcn32_resource.c still need to use FPU,
This will cause compilation to fail on ARM64 platforms because
-mgeneral-regs-only is enabled by default to disable the hardware FPU.
Therefore, imitate the dcn31_zero_pipe_dcc_fraction function in
dml/dcn31/dcn31_fpu.c, declare the dcn32_zero_pipe_dcc_fraction function
in dcn32_fpu.c, and move above two operations into this function.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Ao Zhong <hacc1225@gmail.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the process of enabling DCN support for arm64, I found that the
dcn10_resource_construct_fp function in dcn10/dcn10_resource.c still
needs to use FPU. This will cause compilation to fail on ARM64 platforms
because -mgeneral-regs-only is enabled by default to disable the
hardware FPU. So move dcn10_resource_construct_fp from dcn10 folder to
dml/dcn10 folder to enable hardware FPU for that function.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ao Zhong <hacc1225@gmail.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Before we call psp_securedisplay_invoke(), we call
psp_prep_securedisplay_cmd_buf() to prepare and initialize the command
buffer.
However, we didn't use the mutex_lock to protect the status of command
buffer. So when multiple threads are using the command buffer, after
thread A return from psp_securedisplay_invoke() and the command buffer
status is set to SUCCESS, another thread B may call
psp_prep_securedisplay_cmd_buf() and initialize the status to FAILURE
again, and cause Thread A to get a failure return status.
[How]
Move the mutex_lock out of psp_securedisplay_invoke() to its caller to
cover psp_prep_securedisplay_cmd_buf() and the code checking the return
status of command buffer.
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Invalidate unsupported 420 modes on HDMI TMDS. HDMI TMDS does not
support ODM. Any modes that are horizontally wider than 4096, cannot be
supported via TMDS. So they must be filtered out and should not pass
validation.
[How]
Create fake plane for the new stream, and validate global state by going
through dml validation routine.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The file dc.c has multiple comments that do not follow the kernel-doc or
are made in a distracting way. This commit alleviates part of this issue
by reorganizing some comments inside the dc file.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC version 3.2.209 brings along the following:
* Improve color manipulation
* Add corrections to DML and some flag configuration
* Updates for DCN32x
* Expand kernel-doc
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For FreeSync HDR, native color space flag in AMD VSIF(BT.709) should be
used when intepreting content and color space flag in VSC or AVI
infoFrame should be ignored. However, it turned out some userspace
application still use color flag in VSC or AVI infoFrame which is
incorrect.
[How]
Transfer function is used when building the VSC and AVI infoFrame. Set
colorimetry to BT.709 when all the following match:
1. Pixel format is YCbCr;
2. In FreeSync 2 HDR, color is COLOR_SPACE_2020_YCBCR;
3. Transfer function is TRANSFER_FUNC_GAMMA_22;
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Ma Hanghong <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Now dynamic ODM will now be disabled when MPO is required safe
transitions to avoid underflow, but we are triggering the way of minimal
transition too often. Commit state of dc with no check will do pipeline
setup which may re-initialize the component with no need such as audio.
[HOW]
Just do the minimal transition when all of pipes are in use, otherwise
return true to skip.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: zhikzhai <zhikai.zhai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Skipping vblank during global sync update request can result in
underflow on certain displays.
[HOW]
Roll back to the previous behavior where DC waits for vblank during pipe
programming.
Fixes: 5d3e144214 ("drm/amd/display: do not wait for vblank during pipe programming")
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Haiyi Zhou <Haiyi.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
