Some panels generate long HPD events even while connected to
the port. This cause some unexpected CI execution issues. A
new flag is added to track if such spurious long HPDs can be
ignored and are not processed further if the flag is set.
Debugfs entry is added to control the ignore long hpd flag.
v2: Address patch styling comments (Jani Nikula)
v3: Ignoring the HPD moved to hotplug handler and now applies
to all types of outputs (Imre Deak)
v4: use debugfs_create_bool and squash patches (Jani Nikula)
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215083832.287519-2-vinod.govindapillai@intel.com
The pipe needs a certain amount of time during vblank to prefill
sufficiently. If the vblank is too short the relevant watermark
level must be disabled.
Start implementing the necessary calculations to check this.
Scaler and DSC prefill are left out for now as handling those
is not entirely trivial.
Also the PSR latency reporting override chicken bits would
need to be correctly configured based on the results of these
calculations. Just add some FIXMEs for now.
TODO: bspec isn't exactly crystal clear in its explanations
so quite a few open questions remain...
v2: Skip inacive pipes
Handle SAGV latency
v3: Rebase
v4: Fix handling of disabled wm levels (latency == 0)
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230306164854.25928-1-ville.syrjala@linux.intel.com
Atm, during system resume, the driver updates the display connector
information required by the opregion video extensions during system
resume, on platforms both with and without display being present. On
!HAS_DISPLAY platforms this will result in the crash with the stack
trace below, since the driver's connector state is not initialized on
those.
Bspec doesn't specify when each of the opregion functionality is
supported (depending on the presence of display), however we can presume
that none of the video extensions, nor the ACPI _DSM functions are
supported on !HAS_DISPLAY platforms; accordingly skip the corresponding
opregion/ACPI setup on those (also matching the Windows driver in this).
Keep sending the opregion notification about suspending/resuming the
whole adapter (vs. the display only which is a separate power state
notification) on all platforms, similarly to runtime suspend/resume.
This fixes the following:
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 4 PID: 1443 Comm: kworker/u40:55 Tainted: G U 6.2.0-rc8+ #58
Hardware name: LENOVO 82VB/LNVNB161216, BIOS KMCN09WW 04/26/2022
Workqueue: events_unbound async_run_entry_fn
RIP: 0010:drm_connector_list_iter_next+0x4f/0xb0
Call Trace:
<TASK>
intel_acpi_device_id_update+0x80/0x160 [i915]
intel_opregion_resume+0x2f/0x1e0 [i915]
? dg2_init_clock_gating+0x49/0xf0 [i915]
i915_drm_resume+0x137/0x190 [i915]
? __pfx_pci_pm_resume+0x10/0x10
dpm_run_callback+0x47/0x150
Cc: iczero <iczero@hellomouse.net>
Reported-and-tested-by: iczero <iczero@hellomouse.net>
References: https://gitlab.freedesktop.org/drm/intel/-/issues/8015
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230308162503.3219200-1-imre.deak@intel.com
intel_crtc_prepare_cleared_state() is unintentionally losing
the "inherited" flag. This will happen if intel_initial_commit()
is forced to go through the full modeset calculations for
whatever reason.
Afterwards the first real commit from userspace will not get
forced to the full modeset path, and thus eg. audio state may
not get recomputed properly. So if the monitor was already
enabled during boot audio will not work until userspace itself
does an explicit full modeset.
Cc: stable@vger.kernel.org
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230223152048.20878-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
We currently have an issue with some BPPs when using DSC.
According to the HW team, the reason is that a single VDSC engine
instance has some BW limitations that must be accounted for.
So, whenever we approach around 90% of the CDCLK, a second VDSC engine
has to be used.
This always means using two slices. However, in our current code,
the amount of slices is calculated independently of whether
we need to enable the second VDSC engine or not.
This leads to some logical issues when, according to the pixel clock needs,
we need to enable the second VDSC engine.
But as we calculated previously that we can only use a single slice,
we can't do that and fail.
So, we need to fix that so that the number of VDSC engines enabled
should depend on the number of slices, and the number of slices
should also depend on BW requirements.
Lastly, we didn't have BPP limitation for ADLP/MTL/DG2 implemented,
which says that DSC output BPPs can only be chosen within the range of 8 to 27
(BSpec 49259).
All of this applied together allows us to fix existing FIFO underruns,
which we have in many DSC tests.
v2: - Replace min with clamp_t(Jani Nikula)
- Fix commit message(Swati Sharma)
- Added "Closes"(Swati Sharma)
BSpec: 49259
HSDES: 18027167222
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8231
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230306080401.22552-1-stanislav.lisovskiy@intel.com
The idea that ctg uses different HPD live state bits is
total nonsense, at least on my machine (Dell Latitude
E5400).
The only reason DP-B even works on my ctg is that DP-D
live state is stuck high, even though there is no physical
DP-D port. So when the detect checks DP-B live state it
sees the stuck live state of DP-D instead. If I hack
the driver to not register DP-D at all, and thus we never
enabe DP-D HPD, DP-B stops working as well.
Just to put some conclusive evidence into this mess,
here are the actual hotplug register values for each port:
Everything disconnected:
PORT_HOTPLUG_EN (0x00061110): 0x00000000
PORT_HOTPLUG_STAT (0x00061114): 0x00000000
PORT_HOTPLUG_EN (0x00061110): 0x08000000
PORT_HOTPLUG_STAT (0x00061114): 0x08000000
PORT_HOTPLUG_EN (0x00061110): 0x10000000
PORT_HOTPLUG_STAT (0x00061114): 0x00000000
PORT_HOTPLUG_EN (0x00061110): 0x20000000
PORT_HOTPLUG_STAT (0x00061114): 0x00000000
Only port B connected:
PORT_HOTPLUG_EN (0x00061110): 0x00000000
PORT_HOTPLUG_STAT (0x00061114): 0x00000000
PORT_HOTPLUG_EN (0x00061110): 0x08000000
PORT_HOTPLUG_STAT (0x00061114): 0x08000000
PORT_HOTPLUG_EN (0x00061110): 0x10000000
PORT_HOTPLUG_STAT (0x00061114): 0x00000000
PORT_HOTPLUG_EN (0x00061110): 0x20000000
PORT_HOTPLUG_STAT (0x00061114): 0x20000000
Only port C connected:
PORT_HOTPLUG_EN (0x00061110): 0x00000000
PORT_HOTPLUG_STAT (0x00061114): 0x00000000
PORT_HOTPLUG_EN (0x00061110): 0x08000000
PORT_HOTPLUG_STAT (0x00061114): 0x08000000
PORT_HOTPLUG_EN (0x00061110): 0x10000000
PORT_HOTPLUG_STAT (0x00061114): 0x10000000
PORT_HOTPLUG_EN (0x00061110): 0x20000000
PORT_HOTPLUG_STAT (0x00061114): 0x00000000
So the enable bit and live state bit always match 1:1.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302161013.29213-4-ville.syrjala@linux.intel.com
sizeof(struct intel_dmc) > 1024 bytes, allocated on all platforms as
part of struct drm_i915_private, whether they have DMC or not.
Allocate struct intel_dmc dynamically, and hide all the dmc details
behind an opaque pointer in intel_dmc.c.
Care must be taken to take into account all cases: DMC not supported on
the platform, DMC supported but not initialized, and DMC initialized but
not loaded. For the second case, we need to move the wakeref out of
struct intel_dmc.
v2:
- Rebase to kzalloc dmc after runtime pm get (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301122944.1298929-4-jani.nikula@intel.com
There's only one reference to the struct intel_dmc members dc_state,
target_dc_state, and allowed_dc_mask within intel_dmc.c, begging the
question why they are under struct intel_dmc to begin with.
Moreover, the only references to i915->display.dmc outside of
intel_dmc.c are to these members.
They don't belong. Move them from struct intel_dmc to struct
i915_power_domains, which seems like a more suitable place.
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301122944.1298929-1-jani.nikula@intel.com
Pull drm fixes from Dave Airlie:
"fbdev:
- fix uninit var in error path
shmem:
- revert unGPLing an export
i915:
- Don't use stolen memory or BAR mappings for ring buffers with LLC
- Add inverted backlight quirk for HP 14-r206nv
- Fix GSI offset for MCR lookups
- GVT fixes (memleak, debugfs attributes, kconfig, typos)
amdgpu:
- SMU 13 fixes
- Enable TMZ for GC 10.3.6
- Misc display fixes
- Buddy allocator fixes
- GC 11 fixes
- S0ix fix
- INFO IOCTL queries for GC 11
- VCN harvest fixes for SR-IOV
- UMC 8.10 RAS fixes
- Don't restrict bpc to 8
- NBIO 7.5 fix
- Allow freesync on PCon for more devices
amdkfd:
- SDMA fix
- Illegal memory access fix"
* tag 'drm-next-2023-03-03-1' of git://anongit.freedesktop.org/drm/drm: (45 commits)
drm/amdgpu/vcn: fix compilation issue with legacy gcc
drm/amd/display: Extend Freesync over PCon support for more devices
Revert "drm/amd/display: Do not set DRR on pipe commit"
drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytes
drm/amd/display: Ext displays with dock can't recognized after resume
drm/amdgpu: fix ttm_bo calltrace warning in psp_hw_fini
drm/amdgpu: remove unused variable ring
drm/amd/display: fix dm irq error message in gpu recover
drm/amd: Fix initialization for nbio 7.5.1
drm/amd/display: Don't restrict bpc to 8 bpc
drm/amdgpu: Make umc_v8_10_convert_error_address static and remove unused variable
drm/radeon: Fix eDP for single-display iMac11,2
drm/shmem-helper: Revert accidental non-GPL export
drm: omapdrm: Do not use helper unininitialized in omap_fbdev_init()
drm/amd/pm: downgrade log level upon SMU IF version mismatch
drm/amdgpu: Add ecc info query interface for umc v8_10
drm/amdgpu: Add convert_error_address function for umc v8_10
drm/amdgpu: add bad_page_threshold check in ras_eeprom_check_err
drm/amdgpu: change default behavior of bad_page_threshold parameter
drm/amdgpu: exclude duplicate pages from UMC RAS UE count
...
Grab the HDR DPCD refresh timeout (time we need to wait after
writing the sourc OUI before the HDR DPCD registers are ready)
from the VBT.
Windows doesn't even seem to have any default value for this,
which is perhaps a bit weird since the VBT value is documented
as TGL+ and I thought the HDR backlight stuff might already be
used on earlier platforms. To play it safe I left the old
hardcoded 30ms default in place. Digging through some internal
stuff that seems to have been a number given by the vendor for
one particularly slow TCON. Although I did see 50ms mentioned
somewhere as well.
Let's also include the value in the debug print to ease
debugging, and toss in the customary connector id+name as well.
The TGL Thinkpad T14 I have sets this to 0 btw. So the delay
is now gone on this machine:
[CONNECTOR:308:eDP-1] Detected Intel HDR backlight interface version 1
[CONNECTOR:308:eDP-1] Using Intel proprietary eDP backlight controls
[CONNECTOR:308:eDP-1] SDR backlight is controlled through PWM
[CONNECTOR:308:eDP-1] Using native PCH PWM for backlight control (controller=0)
[CONNECTOR:308:eDP-1] Using AUX HDR interface for backlight control (range 0..496)
[CONNECTOR:308:eDP-1] Performing OUI wait (0 ms)
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230220164718.23117-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
At least on some platforms (tested on ctg) the way
vgacon does screen blanking seems to flag constant
FIFO underruns, which means we have to be prepared
for them while the driver is loading. Currently
there is a time window between drm_crtc_init() and
intel_sanitize_fifo_underrun_reporting() during
which FIFO underrun reporting is in fact marked as
enabled. Thus we may end up mistakenly detecting
these bogus underruns during driver init.
Close the race by marking FIFO underrun reporting
as disabled prior to even registering the crtc.
intel_sanitize_fifo_underrun_reporting()/etc. will
re-enable it later if needed.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125185234.21599-2-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
The audio logic lives in the transcoder rather than the pipe,
so start tracking it like that.
This is only really important for bigjoiner cases where tracking
by pipe doesn't work at all since intel_audio_codec_{enable,disable}()
won't even be called for the slave pipe. This means the state
checker won't find the ELD for the slave pipe and gets upset.
The PD->has_audio readout does currently work since that gets
read out from the same transcoder for both pipes.
For other cases this doesn't actually matter since it's only
the normal pipe transcoders that are audio capable, whereas
the more special transcoders (EDP/DSI) are not.
v2: Fix kernel docs
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230222151454.24888-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8222
Pull drm updates from Dave Airlie:
"There are a bunch of changes all over in the usual places.
Highlights:
- habanalabs moves from misc to accel
- first accel driver for Intel VPU (Versatile Processing Unit)
inference engine
- dropped all the ancient legacy DRI1 drivers. I think it's been at
least 10 years since anyone has heard about these.
- Intel DG2 updates and prelim Meteorlake enablement
- etnaviv adds support for Versilicon NPU device (a GPU like engine
with inference accelerators)
Detailed summary:
Removals:
- remove legacy dri1 drivers: i810, mga, r128, savage, sis, tdfx, via
New driver:
- intel VPU accelerator driver
- habanalabs comes via drm tree now
drm/core:
- use drm_dbg_ helpers in several places
- Document defaults for CRTC backgrounds
- Document use of drm_minor
edid:
- improve mode parsing and refactoring
connector:
- support analog TV mode property
media:
- add some common formats
udmabuf:
- add vmap/vunmap methods
fourcc:
- add XRGB1555 and RGB565 formats
- document open source user waiver
firmware:
- fix color-format selection for system framebuffer
format-helper:
- Add conversion from XRGB8888 to various sysfb formats
- Make XRGB8888 the only driver-emulated legacy format
- Add conversion from XRGB8888 to XBGR8888 and ABGR8888
fb-helper:
- fix preferred depth and bpp values across drivers
- Avoid blank consoles from selecting an incorrect color format
probe-helper:
- Enable/disable HPD on connectors
scheduler:
- Fix lockup in drm_sched_entity_kill()
- Deprecate drm_sched_resubmit_jobs()
bridge:
- remove unused functions
- implement i2c probe_new in various drivers
- ite-it6505: Locking fixes, Cache EDID data
- ite-it66121: Support IT6610 chip
- lontium-tl9611: Fix HDMI on DragonBoard 845c
- parade-ps8640: Use atomic bridge functions
- Support i.MX93 LDB plus DT bindings
debugfs:
- add per device helpers and convert drivers
displayport:
- mst fixes
- add DP adaptive sync DPCD definitions
fbdev:
- always pick 32bpp as default
- remove some unused code
simpledrm:
- support system memory framebuffers
panel:
- add orientation quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50
- Use ktime_get_boottime() to measure power-down delay
- Fix auto-suspend delay
- Visionox VTDR6130 AMOLED DSI
- Support Himax HX8394
- Convert many drivers to common generic DSI write-sequence helper
- AUO A030JTN01
ttm:
- drop bo wait wrapper
- fix MIPS build
habanalabs:
- moved driver to accel subsystem
- gaudi2 decoder error improvement
- more trace events
- Gaudi2 abrupt reset by firmware support
- add uAPI to flush memory transactions
- add uAPI to pass through userspace reqs to fw
- remove dma-buf export by handle
amdgpu:
- add new INFO queries for peak and min sclk/mclk for profile modes
- Add PCIe info to the INFO IOCTL
- secure display support for multiple displays
- DML optimizations
- DCN 3.2 updates
- PSR updates
- DP 2.1 updates
- SR-IOV RAS updates
- VCN RAS support
- SMU 13.x updates
- Switch 1 element arrays to flexible arrays
- Add RAS support for DF 4.3
- Stack size improvements
- S0ix rework
- Allow 0 as a vram limit on APUs
- Handle profiling modes for SMU13.x
- Fix possible segfault in failure case
- Rework FW requests to happen in early_init for all IPs so that we
don't lose the sbios console if FW is missing
- Fix power reporting on certain firmwares for CZN/RN
- Allow S0ix without BIOS support
- Enable freesync over PCon
- Re-enable the AGP aperture on GMC 11.x
amdkfd:
- Error handling fixes
- PASID fixes
- Fix for cleared VRAM BOs
- Fix cleanup if GPUVM creation fails
- Memory accounting fix
- Use resource_size rather than open codeing it
- GC11 mGPU fix
radeon:
- Switch 1 element arrays to flexible arrays
- Fix memory leak on shutdown
- move to new logging
i915:
- Meteorlake display/OA/GSC fw/workarounds enabling
- DP MST DSC support
- Gamma/degamma readout support for the state checker
- Enable SDP split support for DP 2.0
- Add probe blocking support to i915.force_probe parameter
- Enable Xe HP 4tile support
- Avoid display direct calls to uncore
- Fix HuC delayed load memory leaks
- Add DG2 workarounds Wa_18018764978 and Wa_18019271663
- Improve suspend / resume times with VT-d scanout workaround active
- Fix DG2 visual corruption on small BAR systems by not forgetting to
copy CCS aux state
- Fix TLB invalidation for Gen12.50 video and compute engines
- Enable HF-EEODB by switching HDMI, DP and LVDS to use struct
drm_edid
- Start using unversioned DMC firmware paths for new platforms
- ELD refactor: Stop using hardware buffer, precompute ELD
- lots of display code refactoring
nouveau:
- drop legacy ioctl support
- replace 0-sized array
msm:
- dpu/dsi/mdss: Support for SM8350, SM8450 SM8550 and SC8280XP platform
- Added bindings for SM8150
- dpu: Partial support for DSC on SM8150 and SM8250
- dpu: Fixed color transformation matrix being lost on suspend/resume
- dp: Support SDM845 and SC8280XP platforms
- dp: Support for limiting DP link rate via DT property
- dsi: Validate display modes according to the DSI OPP table
- dsi: DSI PHY support for the SM6375 platform
- Add MSM_SUBMIT_BO_NO_IMPLICI
- a2xx: Support to load legacy firmware
- a6xx: GPU devcore dump updates for a650/a660
- GPU devfreq tuning and fixes
- Turn 8960 HDMI PHY into clock provider,
- Make 8960 HDMI PHY use PXO clock from DT
etnaviv:
- experimental versilicon NPU support
- report GPU load via fdinfo format
- MMU fault message improvements
tegra:
- rework syncpoint interrupt
mediatek:
- DSI timing fix
- fix config deps
ast:
- various fixes
exynos:
- restore bridge chain order fixes
gud:
- convert to shadow plane buffers
- perform flushing synchronously during atomic update
- Use new debugfs helpers
arm/hdlcd:
- Use new debugfs helper
ili9486:
- Support 16-bit pixel data
imx:
- Split off IPUv3 driver
mipi-dbi:
- convert to DRM shadow-plane helpers
- rsp driver changes
- Support separate I/O-voltage supply
mxsfb:
- Depend on ARCH_MXS or ARCH_MXC
sun4i:
- convert to new TV mode property
vc4:
- convert to new TV mode property
- kunit tests
- Support RGB565 and RGB666 formats
- convert dsi driver to bridge
- Various HVS an CRTC fixes
v3d:
- Do not opencode drm_gem_object_lookup()
virtio:
- improve tracing
vkms:
- support small cursors in IGT tests
- Fix SEGFAULT from incorrect GEM-buffer mapping
rcar-du:
- fixes and improvements"
* tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drm: (1455 commits)
msm/fbdev: fix unused variable warning with clang.
drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini()
dma-buf: make kobj_type structure constant
drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()
drm/amd/display: disable SubVP + DRR to prevent underflow
drm/amd/display: Fail atomic_check early on normalize_zpos error
drm/amd/pm: avoid unaligned access warnings
drm/amd/display: avoid unaligned access warnings
drm/amd/display: Remove duplicate/repeating expressions
drm/amd/display: Remove duplicate/repeating expression
drm/amd/display: Make variables declaration inside ifdef guard
drm/amd/display: Fix excess arguments on kernel-doc
drm/amd/display: Add previously missing includes
drm/amd/amdgpu: Add function prototypes to headers
drm/amd/display: Add function prototypes to headers
drm/amd/display: Turn global functions into static
drm/amd/display: remove unused _calculate_degamma_curve function
drm/amd/display: remove unused func declaration from resource headers
drm/amd/display: unset initial value for tf since it's never used
drm/amd/display: camel case cleanup in color_gamma file
...
