Testing the stealing of guc ids is hard from user space as we have 64k
guc_ids. Add a selftest, which artificially reduces the number of guc
ids, and forces a steal.
The test creates a spinner which is used to block all subsequent
submissions until it completes. Next, a loop creates a context and a NOP
request each iteration until the guc_ids are exhausted (request creation
returns -EAGAIN). The spinner is ended, unblocking all requests created
in the loop. At this point all guc_ids are exhausted but are available
to steal. Try to create another request which should successfully steal
a guc_id. Wait on last request to complete, idle GPU, verify a guc_id
was stolen via a counter, and exit the test. Test also artificially
reduces the number of guc_ids so the test runs in a timely manner.
v2:
(John Harrison)
- s/stole/stolen
- Fix some wording in test description
- Rework indexing into context array
- Add test description to commit message
- Fix typo in commit message
(Checkpatch)
- s/guc/(guc) in NUMBER_MULTI_LRC_GUC_ID
v3:
(John Harrison)
- Set array value to NULL after extracting error
- Fix a few typos in comments / error messages
- Delete redundant comment in commit message
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214170500.28569-8-matthew.brost@intel.com
While attempting to debug a CT deadlock issue in various CI failures
(most easily reproduced with gem_ctx_create/basic-files), I was seeing
CPU deadlock errors being reported. This were because the context
destroy loop was blocking waiting on H2G space from inside an IRQ
spinlock. There no was deadlock as such, it's just that the H2G queue
was full of context destroy commands and GuC was taking a long time to
process them. However, the kernel was seeing the large amount of time
spent inside the IRQ lock as a dead CPU. Various Bad Things(tm) would
then happen (heartbeat failures, CT deadlock errors, outstanding H2G
WARNs, etc.).
Re-working the loop to only acquire the spinlock around the list
management (which is all it is meant to protect) rather than the
entire destroy operation seems to fix all the above issues.
v2:
(John Harrison)
- Fix typo in comment message
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214170500.28569-5-matthew.brost@intel.com
Declare which FBC instances are present via a fbc_mask
in device info. For the moment there is just the one.
TODO: Need to figure out how to expose multiple FBC
instances in debugs. Just different file names, or move
the files under some subdirectory (per-crtc maybe), or
something else? This will need igt changes as well.
v2: Put the mask into device_info.display (Jani)
Put the magic pipe->fbc thing into skl_fbc_id_for_pipe() (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213134450.3082-4-ville.syrjala@linux.intel.com
intel_cdclk.h only needs i915_drv.h for struct intel_cdclk_config. Move
the definition to intel_cdclk.h and turn the includes around to avoid
including i915_drv.h from other headers.
The intel cdclk state macros in intel_cdclk.h still reference struct
drm_i915_private, but as macros they don't strictly require the
definition until they are used.
v2: Expand on the commit message wrt cdclk state macros
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213114106.296017-1-jani.nikula@intel.com
Thomas Zimmermann requested a fixes backmerge, specifically also for
96c5f82ef0 ("drm/vc4: fix error code in vc4_create_object()")
Just a bunch of adjacent changes conflicts, even the big pile of them
in vc4.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
intel_device_info.h references struct pci_dev but does not ensure that
the struct has been declared, causing build failures if something in
other headers changes so that the implicit dependency it is relying on
is no longer satisfied:
In file included from drivers/gpu/drm/i915/intel_device_info.h:32,
from drivers/gpu/drm/i915/gt/uc/intel_uc_fw.h:11,
from drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c:11:
drivers/gpu/drm/i915/display/intel_display.h:643:39: error: 'struct pci_dev' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
643 | bool intel_modeset_probe_defer(struct pci_dev *pdev);
| ^~~~~~~
cc1: all warnings being treated as errors
Add a declaration of the struct to fix this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes: 94b541f53d ("drm/i915: Add intel_modeset_probe_defer() helper")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213170753.3680209-1-broonie@kernel.org
Collect the dipslay related mask under the display sub-structure
in intel_device_info.
Note that there is a slight change in behaviour in that we zero
out .display entirely when !HAS_DISPLAY (aka. pipe_mask==0), so
now we also zero out the other masks (although cpu_transocder_mask
should already be zero of pipe_mask is zero). abox_mask is
only used by the display core init when HAS_DISPLAY is true, so
the actual behaviour of the system shouldn't change despite the
zeroing of these masks.
There is a lot more display stuff directly in device info that
could be moved over. Maybe someone else will be inspired to do it...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210122726.12577-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
This is a revert of commits
d67739268c ("drm/i915/gt: Mark up the nested engine-pm timeline lock as irqsafe")
6c69a45445 ("drm/i915/gt: Mark context->active_count as protected by timeline->mutex")
6dcb85a0ad ("drm/i915: Hold irq-off for the entire fake lock period")
The existing code leads to a different behaviour depending on whether
lockdep is enabled or not. Any following lock that is acquired without
disabling interrupts (but needs to) will not be noticed by lockdep.
This it not just a lockdep annotation but is used but an actual mutex_t
that is properly used as a lock but in case of __timeline_mark_lock()
lockdep is only told that it is acquired but no lock has been acquired.
It appears that its purpose is just satisfy the lockdep_assert_held()
check in intel_context_mark_active(). The other problem with disabling
interrupts is that on PREEMPT_RT interrupts are also disabled which
leads to problems for instance later during memory allocation.
Add a CONTEXT_IS_PARKING bit to intel_engine_cs and set_bit/clear_bit it
instead of mutex_acquire/mutex_release. Use test_bit in the two
identified spots which relied on the lockdep annotation.
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YbO8Ie1Nj7XcQPNQ@linutronix.de
Pull drm fixes from Dave Airlie:
"Regular fixes, pretty small overall, couple of core fixes, two i915
and two amdgpu, hopefully it stays this quiet.
ttm:
- fix ttm_bo_swapout
syncobj:
- fix fence find bug with signalled fences
i915:
- fix error pointer deref in gem execbuffer
- fix for GT init with GuC/HuC on ICL
amdgpu:
- DPIA fix
- eDP fix"
* tag 'drm-fixes-2021-12-10' of git://anongit.freedesktop.org/drm/drm:
drm/i915/gen11: Moving WAs to icl_gt_workarounds_init()
drm/amd/display: prevent reading unitialized links
drm/amd/display: Fix DPIA outbox timeout after S3/S4/reset
drm/i915: Fix error pointer dereference in i915_gem_do_execbuffer()
drm/syncobj: Deal with signalled fences in drm_syncobj_find_fence.
drm/ttm: fix ttm_bo_swapout
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and netfilter.
Current release - regressions:
- bpf, sockmap: re-evaluate proto ops when psock is removed from
sockmap
Current release - new code bugs:
- bpf: fix bpf_check_mod_kfunc_call for built-in modules
- ice: fixes for TC classifier offloads
- vrf: don't run conntrack on vrf with !dflt qdisc
Previous releases - regressions:
- bpf: fix the off-by-two error in range markings
- seg6: fix the iif in the IPv6 socket control block
- devlink: fix netns refcount leak in devlink_nl_cmd_reload()
- dsa: mv88e6xxx: fix "don't use PHY_DETECT on internal PHY's"
- dsa: mv88e6xxx: allow use of PHYs on CPU and DSA ports
Previous releases - always broken:
- ethtool: do not perform operations on net devices being
unregistered
- udp: use datalen to cap max gso segments
- ice: fix races in stats collection
- fec: only clear interrupt of handling queue in fec_enet_rx_queue()
- m_can: pci: fix incorrect reference clock rate
- m_can: disable and ignore ELO interrupt
- mvpp2: fix XDP rx queues registering
Misc:
- treewide: add missing includes masked by cgroup -> bpf.h
dependency"
* tag 'net-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
net: dsa: mv88e6xxx: allow use of PHYs on CPU and DSA ports
net: wwan: iosm: fixes unable to send AT command during mbim tx
net: wwan: iosm: fixes net interface nonfunctional after fw flash
net: wwan: iosm: fixes unnecessary doorbell send
net: dsa: felix: Fix memory leak in felix_setup_mmio_filtering
MAINTAINERS: s390/net: remove myself as maintainer
net/sched: fq_pie: prevent dismantle issue
net: mana: Fix memory leak in mana_hwc_create_wq
seg6: fix the iif in the IPv6 socket control block
nfp: Fix memory leak in nfp_cpp_area_cache_add()
nfc: fix potential NULL pointer deref in nfc_genl_dump_ses_done
nfc: fix segfault in nfc_genl_dump_devices_done
udp: using datalen to cap max gso segments
net: dsa: mv88e6xxx: error handling for serdes_power functions
can: kvaser_usb: get CAN clock frequency from device
can: kvaser_pciefd: kvaser_pciefd_rx_error_frame(): increase correct stats->{rx,tx}_errors counter
net: mvpp2: fix XDP rx queues registering
vmxnet3: fix minimum vectors alloc issue
net, neigh: clear whole pneigh_entry at alloc time
net: dsa: mv88e6xxx: fix "don't use PHY_DETECT on internal PHY's"
...
On some platforms the hw has dropped support for 4K GTT pages when
dealing with LMEM, and due to the design of 64K GTT pages in the hw, we
can only mark the *entire* page-table as operating in 64K GTT mode,
since the enable bit is still on the pde, and not the pte. And since we
we still need to allow 4K GTT pages for SMEM objects, we can't have a
"normal" 4K page-table with scratch pointing to LMEM, since that's
undefined from the hw pov. The simplest solution is to just move the 64K
scratch page to SMEM on such platforms and call it a day, since that
should work for all configurations.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211208141613.7251-4-ramalingam.c@intel.com
