The downstream code from which this was derived didn't ever run through
this 'switch' block with non-AFBC formats, but the upstream code does --
we use this function to probe whether a given format is supported.
Demote the warning to eliminate this sort of warning seen on every
boot:
[drm] unsupported AFBC format[3231564e]
And make it warn more than once, because if we *actually* care to see
what formats we're probing/rejecting and for what reasons, we probably
care about more than just the first message.
Drop the comment, because one of the two *is* commonly reachable.
And lastly, drop the unreachable return; we'd do better to let the
compiler complain if we start hitting this unexpectedly.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031101557.1.Ic1569d394173c1c3016142fee4bb87a09753db94@changeid
DSM granularity is 1MB so make sure we stick to that.
The address set by firmware in GEN12_DSMBASE in driver initialization
doesn't mean "anything above that and until end of lmem is part of DSM".
In fact, there may be a few KB that is not part of DSM on the end of
lmem. How large is that space is platform-dependent, but since it's
always less than the DSM granularity, it can be simplified by simply
aligning the size down.
v2: replace "1 * SZ_1M" with SZ_1M (Andrzej).
v3: reword commit message to explain why the round down is needed
(Lucas)
Cc: Matthew Auld <matthew.auld@intel.com>
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202180243.23637-1-nirmoy.das@intel.com
This reverts commit 1a65327a84.
This should be resolved so we can re-enable this. Also,
the AGP apeture was bring programmed to 0 on MMHUB 3.0.1
since agp_start and end were not being set.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Accessing GRBM_GFX_CNTL in full access time has risk when VF is doing MMIO attacking.
Therefore, VF writing GRBM_GFX_CNTL are blocked by L1 Policy.
For RLCG interface, RLCG use SCRATCH_REG2 which is copied from GRBM_GFX_CNTL.
[How]
Remove writing GRBM_GFX_CNTL in amdgpu_virt_rlcg_reg_rw.
v2:
Remove directly writing GRBM_GFX_INDEX in amdgpu_virt_rlcg_reg_rw
as RLCG interface no need to use it.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We allow sending PSP messages LOAD_ASD and UNLOAD_TA without
acquiring a lock in drm_dev_enter during driver unload
because we must call drm_dev_unplug as the beginning
of unload driver sequence.
Added WARNING if other PSP messages are sent without a lock.
After this commit, the following commands would work
-sudo modprobe -r amdgpu
-sudo modprobe amdgpu
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cppcheck reports
drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c:1403:76: style:
Expression is always true because 'else if' condition is opposite to previous condition at line 1396. [multiCondition]
} else if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type == SUBVP_PHANTOM) {
^
drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c:1396:69: note: first condition
if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type != SUBVP_PHANTOM) {
^
drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c:1403:76: note: else if condition is opposite to first condition
} else if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type == SUBVP_PHANTOM) {
It is not necessary to explicitly the check != condition, an else is simplier.
Fixes: 238debcaeb ("drm/amd/display: Use DML for MALL SS and Subvp allocation calculations")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
checkpatch reports
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:2902:13: style:
Expression is always true because 'else if' condition is opposite to previous condition at line 2895. [multiCondition]
} else if (blank) {
^
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:2895:6: note: first condition
if (!blank) {
^
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:2902:13: note: else if condition is opposite to first condition
} else if (blank) {
It is not necessary to explicitly the check != condition, an else is simplier.
Fixes: aa5a577730 ("drm/amd/display: Vari-bright looks disabled near end of MM14")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull drm fixes from Dave Airlie:
"A few more fixes this week, a bit more spread out though.
We have a bunch of nouveau regression and stabilisation fixes, along
with usual amdgpu, and i915. Otherwise just some minor misc ones:
dma-fence:
- fix signaling bit for private fences
panel:
- boe-tv101wum-nl6 disable fix
nouveau:
- gm20b acr regression fix
- tu102 scrub status fix
- tu102 wait for firmware fix
i915:
- Fixes for potential use-after-free and double-free
- GuC locking and refcount fixes
- Display's reference clock value fix
amdgpu:
- GC11 fixes
- DCN 3.1.4 fixes
- NBIO 4.3 fix
- DCN 3.2 fixes
- Properly handle additional cases where DCN is not supported
- SMU13 fixes
vc4:
- fix CEC adapter names
ssd130x:
- fix display init regression"
* tag 'drm-fixes-2023-02-03' of git://anongit.freedesktop.org/drm/drm: (23 commits)
drm/amd/display: Properly handle additional cases where DCN is not supported
drm/amdgpu: Enable vclk dclk node for gc11.0.3
drm/amd: Fix initialization for nbio 4.3.0
drm/amdgpu: enable HDP SD for gfx 11.0.3
drm/amd/pm: drop unneeded dpm features disablement for SMU 13.0.4/11
drm/amd/display: Reset DMUB mailbox SW state after HW reset
drm/amd/display: Unassign does_plane_fit_in_mall function from dcn3.2
drm/amd/display: Adjust downscaling limits for dcn314
drm/amd/display: Add missing brackets in calculation
drm/amdgpu: update wave data type to 3 for gfx11
drm/panel: boe-tv101wum-nl6: Ensure DSI writes succeed during disable
drm/nouveau/acr/gm20b: regression fixes
drm/nouveau/fb/tu102-: fix register used to determine scrub status
drm/nouveau/devinit/tu102-: wait for GFW_BOOT_PROGRESS == COMPLETED
drm/i915/adlp: Fix typo for reference clock
drm/i915: Fix potential bit_17 double-free
drm/i915: Fix up locking around dumping requests lists
drm/i915: Fix request ref counting during error capture & debugfs dump
drm/i915/guc: Fix locking when searching for a hung request
drm/i915: Avoid potential vm use-after-free
...
msm-next for v6.3
There is one devfreq patch, maintainer acked to land via msm-next to
avoid a build break on platforms that do not support PM_DEVFREQ. And
otherwise the usual assortment:
GPU:
- Add MSM_SUBMIT_BO_NO_IMPLICIT
- a2xx: Support to load legacy firmware
- a6xx: GPU devcore dump updates for a650/a660
- GPU devfreq tuning and fixes
DPU, DSI, MDSS:
- Support for SM8350, SM8450 SM8550 and SC8280XP platform
Core:
- Added bindings for SM8150 (driver support already present)
DPU:
- Partial support for DSC on SM8150 and SM8250
- Fixed color transformation matrix being lost on suspend/resume
- Include DSC blocks into register snapshot
- Misc HW catalog fixes
DP:
- Support for DP on SDM845 and SC8280XP platforms
- HPD fixes
- Support for limiting DP link rate via DT property, this enables
- Support for HBR3 rates.
DSI:
- Validate display modes according to the DSI OPP table
- DSI PHY support for the SM6375 platform
- Fixed byte intf clock selection for 14nm PHYs
- Fix the case of empty OPP tables (fixing db410c)
- DT schema rework and fixes
HDMI:
- Turn 8960 HDMI PHY into clock provider,
- Make 8960 HDMI PHY use PXO clock from DT
MDP5:
- Schema conversion to YAML
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv6zQ-zsgS+NG+WuV=tk51q9vA2QdKqYhNgiXQddAdZjA@mail.gmail.com
In configurations with CONFIG_KUNIT=m, builting the unit test
into the kernel causes a link failure:
arm-linux-gnueabi-ld: drivers/gpu/drm/vc4/tests/vc4_mock.o: in function `__build_mock':
vc4_mock.c:(.text+0x6e): undefined reference to `kunit_do_failed_assertion'
arm-linux-gnueabi-ld: vc4_mock.c:(.text+0x9c): undefined reference to `kunit_do_failed_assertion'
arm-linux-gnueabi-ld: vc4_mock.c:(.text+0x100): undefined reference to `kunit_ptr_not_err_assert_format'
...
Allow this to be a loadable module as well to have Kconfig
sort out the dependencies correctly.
Fixes: f759f5b53f ("drm/vc4: tests: Introduce a mocking infrastructure")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230202102346.868771-1-arnd@kernel.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
One fixup series
- Make sure to restore bridge chain order by enabling the drm panel
prepare_prev_first flag of the bridge and panel drivers - tc358764 display
bridge device and Samsung s6e3ha2/s6e63j0x03/s6e8aa0 panel devices.
In case of any boards using Exynos5433 SoC, below Display pipeline could be
configured.
Decon -> MIC -> MIPI-DSI -> Panel
So, this patch series makes sure to enable previous bridge device before
enabling MIPI-DSI device.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130051055.15340-1-inki.dae@samsung.com
There could be boards with DCN listed in IP discovery, but no
display hardware actually wired up. In this case the vbios
display table will not be populated. Detect this case and
skip loading DM when we detect it.
v2: Mark DCN as harvested as well so other display checks
elsewhere in the driver are handled properly.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Otherwise we can be out of sync with what's in the hardware, leading
to us rerunning every command that's presently in the ringbuffer.
[How]
Reset software state for the mailboxes in hw_reset callback.
This is already done as part of the mailbox init in hw_init, but we
do need to remember to reset the last cached wptr value as well here.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The hwss function does_plane_fit_in_mall not applicable to dcn3.2 asics.
Using it with dcn3.2 can result in undefined behaviour.
[How]
Assign the function pointer to NULL.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
