The adreno_is_a20x() and adreno_is_a225() functions rely on the
GPU revision, but such information is retrieved inside adreno_gpu_init(),
which is called afterwards.
Fix this problem by caling adreno_gpu_init() earlier, so that
the GPU information revision is available when adreno_is_a20x()
and adreno_is_a225() run.
Tested on a imx53-qsb board.
Fixes: 21af872cd8 ("drm/msm/adreno: add a2xx")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543456/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Change the order of region allocations to make the addresses match
downstream. This shouldn't matter very much, but helps eliminate one
more difference when comparing register accesses.
Also, make the log region 16K long. That's what it is, unconditionally
on A6xx and A7xx.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543338/
Signed-off-by: Rob Clark <robdclark@chromium.org>
While it's not very well understood, there is some sort of a fault
handler implemented in the GMU firmware which triggers when a certain
bit is set, resulting in the M3 core not booting up the way we expect
it to.
Write a magic value to a magic register to hopefully prevent that
from happening.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543335/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Since the revision becomes an opaque identifier with future GPUs, move
away from treating different ranges of bits as having a given meaning.
This means that we need to explicitly list different patch revisions in
the device table.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549782/
Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Report VBIOS version in vbios_version sysfs node instead of part number.
Part number remains constant for a SKU type.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix a regression in blank pixel data caused by coding mistake
- Fix a bug when searching for insert_above_mpcc
- Update add plane to context logic with a new algorithm
- Adjust visual confirm dpp height offset to be 1/240 of v addressable
- Add interface to enable DPIA trace
- Support plane clip with zero recout size
- Blocking invalid 420 modes on HDMI TMDS for DCN31 and DCN314
- Make mpc32 functions available to future DCNs
- Change HDCP update sequence for DM
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Refactor the sequence in hdcp_update_display() to use
mod_hdcp_update_display().
Previous sequence:
- remove()->add()
This Sequence was used to update the display, (mod_hdcp_update_display
didn't exist at the time). This meant for any hdcp updates (type changes,
enable/disable) we would remove, reconstruct, and add. This leads to
unnecessary calls to psp eventually
New Sequence using mod_hdcp_update_display():
- add() once when stream is enabled
- use update() for all updates
The update function checks for prev == new states and will not
unnecessarily end up calling psp via add/remove.
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Secondary DPP pipes are used for rendering secondary layers of planes.
The name "for layer" doesn't make it obvious. The function is acquiring
a free pipe as secondary dpp pipe only. We rename it so it is more obvious.
In a future follow up change, we want to add functions to acquire free pipe as
opp head pipe or otg master pipe as well. They will have their separate
allocation priority.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
generic dc resource file should not know what an optimal idle pipe is
because this is dcn hardware dependent.
[how]
We move the optimial pipe searching logic in dcn specific layer.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
In overclocking scenarios the max memclk could be higher
than the DC mode limit. However, for configs that don't
support MCLK switching we need to set the max memclk to
the overclocked max instead of the DC mode max or we
could result in underflow.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
With previous ODM + MPO policy we will only allocate pipes when MPO plane
has intersection with current ODM slice. With this policy we have to indicate
scaling change when plane clip is updated in case plane clip change causes
MPO plane to go in or out current ODM slice.
With new ODM + MPO policy we allocate pipe independent from plane clip size
so we no longer treat it as a scaling change. There no need to do a full update
due to clip size change anymore.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
For timing with large v addressable visual confirm is just too small. It is difficult
to tell visually which DPP we are using. On the other hand with timing with small
v addressable visual confirm is too large and covers the UI area.
[how]
We calculate visual confirm dpp height offset based on v addressable so it stays
relatively the same height i.e. 1/240 verticle portion of the screen.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Preivous algorithm for finding an optimal idle pipe for a new plane was
implemented to handle dynamic pipe allocation when MPO plane moves
from one ODM slice to the other. Now pipe allocation is more static so
it no longer depends on the MPO plane's position. We are simplifying
our logic and remove unnecessary handling in our code.
[how]
Apply a new simplified version of pipe resource allocation logic to reduce
unnecessary flip delay caused by swapping secondary dpp pipe to other
MPC blending tree.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We only acquire MPO pipe for blending tree where the plane clip will
be rendered. If an MPO plane is outside current ODM slice rect, we will
skip pipe allocation. With new programming policy we want to allocate
pipes for every ODM slice blending tree even for those whose ODM slice
rect doesn't intersect with plane clip. This is aligned with DML validation
so the pipe topology is programmed independently from the plane's
position and dst plane size.
[how]
- Remove the logic to allocate pipe only when the MPO plane intersects
with ODM slice and replace with the new logic to always allocate pipes.
- Remove the logic to tear down ODM configuration in favor for supporting
secondary MPO planes.
- Remove the logic to use full update when MPO goes accross ODM slice
boundary.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
If plane clip is outside current pipe's ODM slice rect, our logic will
fail validation because we assume that when a pipe is acquired
to support a plane clip, it must blend some portion of the plane
on the screen. This assumption needs to be changed.
When a pipe is acquired to render the plane, we are now allowing
it to support a case where it can take minimum viewport and draw
with zero recout size when the plane clip is outside current ODM
slice rect. The reason is that we want to allocate and get the pipe
pre-programmed so it is ready to be rendered when user moves
the plane over to the current ODM slice with a fast update.
Whereas with the existing solution when user moves the plane
over, we will need to allocate a pipe as needed and power it up
and program it through a full update. This not only impacts the
user experience with unnecessary delay of a frame but also
doesn't generate any benefit to the user because DML doesn't
support it. DML will invalidate based on worst case scenario and
it doesn't depend on the plane location. So having our
programming sequence support such dynamic pipe allocation is
not meaningful anyway.
[how]
In build scaler params allow recout to be zero size and if viewport
is smaller than minimum, set minimum viewport size.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Flash of corruption observed when UCLK switching after transitioning
from DTBCLK to DPREFCLK on subVP(DP) + subVP(HDMI) config
Scenario where DPREFCLK is required instead of DTBCLK is not expected
[How]
Always set the DTBCLK source as DTBCLK0
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Front-end would be programmed using the stream update flags set
from the previous update and the full update should be triggered
whenever commit_state_no_check gets called.
[How]
Set all stream update flags before programming the front-end
Clear all flags that got set to avoid redundant programming
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DPIA traces from DMUB is not enabled by default, which is
less convenient to debug DPIA related issues because we have
to resort to other means to enable DPIA trace.
[How]
Reuse existing DC debug mask to enable DPIA trace log from
kernel command line. This makes debugging DPIA issues easier
especially when system power state (suspend/reboot) is involved.
To turn on DPIA trace, simply add "amdgpu.dcdebugmask=0x80" to
kernel command line.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DPIA traces from DMUB is not enabled by default, which is
less convenient to debug DPIA related issues because we have
to resort to other debug tools to enable DPIA trace.
[How]
Exposes interfaces to update trace mask from the DMUB GPINT commands.
Also provides DC implementations to enable DPIA trace.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
