Add definitions for various pipe timestamp registers:
- frame timestamp (last start of vblank) (g4x+), already had this defined
- flip timestamp (when SURF was last written) (g4x+)
- flipdone timestamp (when last flipdone was signalled) (tgl+)
Note that on pre-tgl the flip related timestamps are only updated
for primary plane flips, but on tgl+ we can select which plane
updates them (via PIPE_MISC2). Let's define those related bits
as well.
Curiously VLV/CHV do not have the frame/flip timestamp registers,
despite all the other related registers being inherited from g4x.
This means we can get rid of the pipe_offsets[] usage for these,
and thus the implicit dev_priv is gone as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230314130255.23273-4-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
'bulk' description taken from another in the same file.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/ttm/ttm_bo.c:98: warning: Function parameter or member 'bulk' not described in 'ttm_bo_set_bulk_move'
drivers/gpu/drm/ttm/ttm_bo.c:768: warning: Function parameter or member 'placement' not described in 'ttm_bo_mem_space'
drivers/gpu/drm/ttm/ttm_bo.c:768: warning: Excess function parameter 'proposed_placement' description in 'ttm_bo_mem_space'
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230317081718.2650744-6-lee@kernel.org
drm/i915 fixes for v6.3-rc3:
- Fix hwmon PL1 power limit enabling
- Fix audio ELD handling for DP MST
- Fix PSR io and wake line calculations
- Fix DG2 HDMI modes with 267.30 and 319.89 MHz pixel clocks
- Fix SSEU subslice out-of-bounds access
- Fix misuse of non-idle barriers as fence trackers
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87r0tq5nyn.fsf@intel.com
Write-combining memory allows speculative reads by CPU.
ggtt->error_capture is WC mapped to CPU, so CPU/MMU can try
to prefetch memory beyond the error_capture, ie it tries
to read memory pointed by next PTE in GGTT.
If this PTE points to invalid address DMAR errors will occur.
This behaviour was observed on ADL and RPL platforms.
To avoid it, guard scratch page should be added after error_capture.
The patch fixes the most annoying issue with error capture but
since WC reads are used also in other places there is a risk similar
problem can affect them as well.
v2:
- modified commit message (I hope the diagnosis is correct),
- added bug checks to ensure scratch is initialized on gen3 platforms.
CI produces strange stacktrace for it suggesting scratch[0] is NULL,
to be removed after resolving the issue with gen3 platforms.
v3:
- removed bug checks, replaced with gen check.
v4:
- change code for scratch page insertion to support all platforms,
- add info in commit message there could be more similar issues
v5:
- check for nop_clear_range instead of gen8 (Tvrtko),
- re-insert scratch pages on resume (Tvrtko)
v6:
- use scratch_range callback to set scratch pages (Chris)
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230308-guard_error_capture-v6-2-1b5f31422563@intel.com
Some panels generate long HPD events even while connected to
the port. This cause some unexpected CI execution issues. A
new flag is added to track if such spurious long HPDs can be
ignored and are not processed further if the flag is set.
Debugfs entry is added to control the ignore long hpd flag.
v2: Address patch styling comments (Jani Nikula)
v3: Ignoring the HPD moved to hotplug handler and now applies
to all types of outputs (Imre Deak)
v4: use debugfs_create_bool and squash patches (Jani Nikula)
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215083832.287519-2-vinod.govindapillai@intel.com
gcc with W=1 reports
drivers/gpu/drm/nouveau/nvkm/engine/fifo/gf100.c:451:1: error:
no previous prototype for ‘gf100_fifo_nonstall_block’ [-Werror=missing-prototypes]
451 | gf100_fifo_nonstall_block(struct nvkm_event *event, int type, int index)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
gf100_fifo_nonstall_block is only used in gf100.c, so it should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230303132731.1919329-1-trix@redhat.com
This patch is used to fix following compilation issue with legacy gcc
error: ‘for’ loop initial declarations are only allowed in C99 mode
Signed-off-by: bobzhou <bob.zhou@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace soc15, nv, soc21 get_rev_id callback with common
helper so we don't need to duplicate code when introduce
new asics.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_ras_register_ras_block should always be invoked
by ras_sw_init, where driver needs to check ras caps
at ip level, instead of asic level.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pcie_bif ras blocks needs to be initialized as early
as possible to handle fatal error detected in hw_init
phase. also align the pcie_bif ras sw_init with other
ras blocks
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Handle case when module is unloaded (kfd_exit) before a process space
(mm_struct) is released.
v2: Fixed potential race conditions by removing all kfd_process from
the process table first, then working on releasing the resources.
v3: Fixed loop element access / synchronization. Fixed extra empty lines.
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- FW Release 0.0.158.0
- Fixes to HDCP, DP MST and more
- Improvements on USB4 links and more
- Code re-architecture on link.h
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The log "DMUB HPD callback" is crucial to identify when DP tunneling
is been established and driver is notified of this event from DMUB.
Same log is shared for long and short hotplug event and we need to
check trailing DC debug log to distinguish between them two, making
debugging on DPIA related issues a bit more troublesome.
[How]
Clearly states in dmesg logs whether this is a long or short hotplug
event.
Reviewed-by: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If disable the mmhub vm contexts(set MMVM_CONTEXTS_DISABLE to 0xffff),
driver loading failed on vf due to fence fallback timer expired on all rings.
FLR cannot reset MMVM_CONTEXTS_DISABLE.
So this vf can not be recovered anymore unless trigger a whole gpu reset.
[How]
Under SRIOV, init MMVM_CONTEXTS_DISABLE in gmc11 golden register setting.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Reviewed-by: Horace Chen <Horace.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For dual displays where pixel rate is much higher on one display,
we may get underflow when DET is evenly allocated.
[How]
Allocate less DET segments for the lower pixel rate display and
more DET segments for the higher pixel rate display
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In USB4 DP tunneling, it's possible to have this scenario that
the path becomes unavailable and CM tears down the path a little bit late.
So, in this case, the HPD is high but fails to read any DPCD register.
That causes the link connection type to be set to sst.
And not all sinks are removed behind the MST branch.
[How]
Restore the link connection type if it fails to read DPCD register.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Handle case when module is unloaded (kfd_exit) before a process space
(mm_struct) is released.
v2: Fixed potential race conditions by removing all kfd_process from
the process table first, then working on releasing the resources.
v3: Fixed loop element access / synchronization. Fixed extra empty lines.
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In USB4 DP tunneling, it's possible to have this scenario that
the path becomes unavailable and CM tears down the path a little bit late.
So, in this case, the HPD is high but fails to read any DPCD register.
That causes the link connection type to be set to sst.
And not all sinks are removed behind the MST branch.
[How]
Restore the link connection type if it fails to read DPCD register.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Hot plugging and then hot unplugging leads to k1 and k2 values to
change, as signal is detected as a virtual signal on hot unplug. Writing
these values to OTG_PIXEL_RATE_DIV register might cause primary display
to blank (known hw bug).
[HOW]
No longer write k1 and k2 values to register if signal is virtual, we
have safe guards in place in the case that k1 and k2 is unassigned so
that an unknown value is not written to the register either.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
