Register 0x9424 is not replicated on any platform, so it shouldn't be
declared with REG_MCR(). Declaring it with _MMIO() is basically
duplicate of the GEN7 version, so just remove the GEN8 and change all
the callers to use the right functions.
Old versions of the gen8 bspec page used to contain a table with MCR
registers, apparently implying 0x9400 - 0x94ff registers were
replicated. However that table went away and there is no information
related to the ranges for gen8 anymore. Moreover the current behavior of
the driver wouldn't do anything special for 0x9424 since there is no
equivalent table in intel_gt_mcr.c: the driver would just fallback to
intel_uncore_{read,write}(). Therefore, do not care about the possible
special case for gen8 and just use the register as non-MCR for all the
platforms.
One place doing read + write is also converted to intel_uncore_rmw().
v2: Reword commit message adding the justification wrt gen8
Fixes: a9e69428b1 ("drm/i915: Define MCR registers explicitly")
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230206165410.3056073-1-lucas.demarchi@intel.com
(cherry picked from commit 869bace73a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
XEHPC_LNCFMISCCFGREG0 and XEHPC_L3SCRUB are both in MCR register ranges
on PVC (with HALFBSLICE and L3BANK replication respectively), so they
should be explicitly declared as MCR registers and use MCR-aware
workaround handlers.
The workarounds/tuning settings should still be applied properly on PVC
even without the MCR annotation, but readback verification on
CONFIG_DRM_I915_DEBUG_GEM builds could potentitally give false positive
"workaround lost on load" warnings on parts fused such that a unicast
read targets a terminated register instance.
Fixes: a9e69428b1 ("drm/i915: Define MCR registers explicitly")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230201222831.608281-1-matthew.d.roper@intel.com
(cherry picked from commit 4039e44237)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
With backlight controller set to -1 in intel_panel_init_alloc() to
distinguish uninitialized values, and controller later being set only if
it's present in VBT, we can end up with -1 for the controller:
[drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation
frequency 200 Hz, active high, min brightness 0, level 255,
controller 4294967295
There's no harm if it happens on platforms that ignore controller due to
only one backlight controller being present, like on VLV above, but play
it safe.
Fixes: bf38bba3e7 ("drm/i915: Try to use the correct power sequencer intiially on bxt/glk")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230207111626.1839645-1-jani.nikula@intel.com
(cherry picked from commit a0dcb06d29)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We now have some eDP+DSI dual panel systems floating around
where the DSI panel is the secondary LFP and thus needs to
consult "panel type 2" in VBT in order to locate all the
other panel type dependant stuff correctly.
To that end we need to pass in the devdata to
intel_bios_init_panel_late(), otherwise it'll just assume
we want the primary panel type. So let's try to just populate
the vbt.ports[] stuff and encoder->devdata for icl+ DSI
panels as well.
We can't do this on older platforms as there we risk a DSI
port aliasing with a HDMI/DP port, which is a totally legal
thing as the DSI ports live in their own little parallel
universe.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8016
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230207064337.18697-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit ba00eb6a4b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Get rid of the if ladder in intel_modeset_setup_hw_state() and hide a
number of functions by adding a .get_hw_state() hook to watermark
functions. At least for now, combine the platform specific sanitization
to the hw state readouts on the relevant platforms instead of adding a
separate hook for that.
There's a functional change on PCH split platforms: If i9xx_wm_init()
fails to read plane latency and chooses the nop functions,
ilk_wm_get_hw_state() won't get called for readout. Add the
ilk_init_lp_watermarks() call on that path which now won't be called in
.get_hw_state(), as it looks like the only thing that could make a
difference.
v2:
- Add missing static (kernel test robot)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6da32831e40606cc8b90491b83196917f2ce36ab.1676317696.git.jani.nikula@intel.com
Add new files intel_wm.[ch] and i9xx_wm.[ch] under display/ to hold
generic and pre-SKL watermark code, respectively. SKL+ watermark code
has already been split out to skl_watermark.[ch].
Use the _wm.[ch] naming for brevity; we may want to rename
skl_watermark.[ch] later accordingly.
Add new intel_wm_init() to call either skl_wm_init() or
i9xx_wm_init(i915) depending on the platform, the latter comprising of
the remains of intel_init_pm().
Sprinkle in some minor checkpatch fixes while moving the code.
v2:
- Rebase
- Fix copyright year
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ddf04a07a37f0368b3fef85d4ebb924082fec6cd.1676317696.git.jani.nikula@intel.com
Determining whether the display engine is present on a platform happens
only in intel_device_info_runtime_init(). Initializing the display power
functionality depends on this condition, so move
intel_power_domains_init() later after the runtime init function has
been called.
The next patch fixing platforms without display, depends on this patch.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208114300.3123934-3-imre.deak@intel.com
v3: Fix vmw_user_bo_lookup which was also dropping the gem reference
before the kernel was done with buffer depending on userspace doing
the right thing. Same bug, different spot.
It is possible for userspace to predict the next buffer handle and
to destroy the buffer while it's still used by the kernel. Delay
dropping the internal reference on the buffers until kernel is done
with them.
Instead of immediately dropping the gem reference in vmw_user_bo_lookup
and vmw_gem_object_create_with_handle let the callers decide when they're
ready give the control back to userspace.
Also fixes the second usage of vmw_gem_object_create_with_handle in
vmwgfx_surface.c which wasn't grabbing an explicit reference
to the gem object which could have been destroyed by the userspace
on the owning surface at any point.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 8afa13a058 ("drm/vmwgfx: Implement DRIVER_GEM")
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230211050514.2431155-1-zack@kde.org
(cherry picked from commit 9ef8d83e8e)
Cc: <stable@vger.kernel.org> # v5.17+
ttm_bo_init_reserved on failure puts the buffer object back which
causes it to be deleted, but kfree was still being called on the same
buffer in vmw_bo_create leading to a double free.
After the double free the vmw_gem_object_create_with_handle was
setting the gem function objects before checking the return status
of vmw_bo_create leading to null pointer access.
Fix the entire path by relaying on ttm_bo_init_reserved to delete the
buffer objects on failure and making sure the return status is checked
before setting the gem function objects on the buffer object.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 8afa13a058 ("drm/vmwgfx: Implement DRIVER_GEM")
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208180050.2093426-1-zack@kde.org
(cherry picked from commit 36d421e632)
Cc: <stable@vger.kernel.org> # v5.17+
v3: Fix vmw_user_bo_lookup which was also dropping the gem reference
before the kernel was done with buffer depending on userspace doing
the right thing. Same bug, different spot.
It is possible for userspace to predict the next buffer handle and
to destroy the buffer while it's still used by the kernel. Delay
dropping the internal reference on the buffers until kernel is done
with them.
Instead of immediately dropping the gem reference in vmw_user_bo_lookup
and vmw_gem_object_create_with_handle let the callers decide when they're
ready give the control back to userspace.
Also fixes the second usage of vmw_gem_object_create_with_handle in
vmwgfx_surface.c which wasn't grabbing an explicit reference
to the gem object which could have been destroyed by the userspace
on the owning surface at any point.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 8afa13a058 ("drm/vmwgfx: Implement DRIVER_GEM")
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230211050514.2431155-1-zack@kde.org
ttm_bo_init_reserved on failure puts the buffer object back which
causes it to be deleted, but kfree was still being called on the same
buffer in vmw_bo_create leading to a double free.
After the double free the vmw_gem_object_create_with_handle was
setting the gem function objects before checking the return status
of vmw_bo_create leading to null pointer access.
Fix the entire path by relaying on ttm_bo_init_reserved to delete the
buffer objects on failure and making sure the return status is checked
before setting the gem function objects on the buffer object.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 8afa13a058 ("drm/vmwgfx: Implement DRIVER_GEM")
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208180050.2093426-1-zack@kde.org
The UNSLICE_UNIT_LEVEL_CLKGATE register programmed by this workaround
has 'BUS' style reset, indicating that it does not lose its value on
engine resets. Furthermore, this register is part of the GT forcewake
domain rather than the RENDER domain, so it should not be impacted by
RCS engine resets. As such, we should implement this on the GT
workaround list rather than an engine list.
Bspec: 19219
Fixes: 3551ff9287 ("drm/i915/gen11: Moving WAs to rcs_engine_wa_init()")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230201222831.608281-2-matthew.d.roper@intel.com
(cherry picked from commit 5f21dc07b5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Why]
We only allowed 1 overlay plane. But now some ASICS can support multiple
overlay planes.
[How]
Use max_slave_planes as the number of overlays we can support.
Also since we cannot draw cursor over a video plane, we need to make
sure that we reject commits where the topmost plane is a video plane
(overlay only).
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Link is a subcomponent in dc. DM should be aware of dc link structure
as one of the abstracted objects maintained by dc. However it should
have no idea of the existence of a link component in dc dedicated to
maintain the states of dc link structure. As such we are moving link interfaces
out of dc_link.h and directly added to dc.h. We are grandually fading out
the explicit inclusion of dc_link header and eventually delete it.
On dc side, since link is a subcomponent behind dc interfaces, it is not
a good idea to implement dc interfaces in each individual subcomponent
of link which is already a subcomponent of dc. So we are decoupling it
by implementing a dc_link_exports in dc. This file will be a thin
translation layer that breaks the dependency so link is able to make
interface changes without breaking DM.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
HUBP_UNBOUNDED_REQ_MODE being enabled while the display is rotated (eg.
going from Portrait mode to Landscape mode) appears to be causing a
p-state hang, specifically during full screen mode on the Tiktok PC app.
Unbounded request mode doesn't appear to be supported with rotation
configs, hence disabling it.
[how]
Within DML, modified unbounded request mode to be configured only when
the rotation angle of the plane is 0.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nasir Osman<nasir.osman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Regression of commit 72fef4980d ("drm/amdgpu: Remove writing GRBM_GFX_CNTL in RLCG interface under SRIOV") on GFX9.
According to GFX9 VF using different method to access GC registers including MMIO(direct) and RLCG(indirect),
removing GRBM_GFX_* writing would make PIPE/ME/VM/QUEUE selection chaos leading to some OCL benchmark failure.
For example,
using RLCG interface to program GRBM_GFX_CNTL/INDEX for selecting MEC(actually the value is only in scratch2/3),
then using MMIO directly program a MEC register in VF driver.
The register programming are invalid due to GC switched to incorrect ME.
[How]
With checking RLCG accessing flag, keep writing GRBM_GFX_* as a legacy way.
But it is still skipped on GFX10+ to avoid violation occurrence.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Newer ASICs such as DCN314 needs to allow for both self refresh and mem
clk switching rather than just self refresh only. Otherwise, we can see
some p-state hangs on ASICs that do support mem clk switching.
[how]
Added an allow_self_refresh_only flag for dcn30_internal_validate_bw
and created a validate_bw method for DCN314 with the allow_self_refresh_only
flag set to false (to support mem clk switching).
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nasir Osman <nasir.osman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Dmub will cache the video position data during PSR-SU enable.
The dmub will use an outdated MPO video position if user try
to drag the video window and it will cause video glitch.
[How]
Disable the PSR-SU temporarily while user drag the video window.
The PSR-SU will be re-enabled after the video window is stable.
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We mistakenly toggle dpms state for non master pipe when handling
link lost. A non master pipe doesn't connect to a backend. So it is
toggling dpms for non master is undefined and caused NULL pointer
dereference.
[how]
Add helper functions to find an array of active master pipes for current
link and only toggle DPMS for active master pipes connected to the link.
Add assert in case we get called to program dpms with non master pipe.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
A recent change was made to implement temporary workaround due DRM
update in MST interfaces. The workaround is added into our generic
deallocation MST sequence.
This ticket is to extract this temporary workaround into its own function so
it is differentiated from our generic sequence.
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In disable_dangling_plane, for phantom pipes, we enable OTG so
disable programming gets the double buffer update. But this
causes an underflow to occur.
[How]
Enable DPG prior to enabling OTG.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
a recent regression has caused us to mistakenly switch RX back to SST mode
when there are remaining mst stream enabled to the link. We are missing
a condition check for stream count before setting RX back to SST mode.
[how]
Add stream count check condition back and do some further refactor so the
logic is easier to understand to prevent future coding error in this sequence.
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
- For prefetch max vratio check, use the calculated
prefetch bandwidth from dml32_CalculatePrefetchSchedule
instead of max prefetch bandwidth
- Also multiply prefetch bandwidth by VRatio since scaling
is not considered one calculating require prefetch bw
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
When k1 and k2 divider programming logic is executed for a phantom
stream, the corresponding master stream should be used for the
calculation. Fix the if condition to use the master stream for checking
signal type instead of the phantom stream.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Single 4K60 playing YUV420 MPO video blocks P-State because
the required VRatio for prefetch is too high (luma plane for
YUV420 is 1bpe, so swath height is 16 and prefetch requires
more lines)
- Allow max vratio per plane to be 7.9 for single display YUV420
MPO video cases
- Ensure that global vratio prefetch (i.e. total prefetch BW vs.
total active bandwidth) does not excited 4.0
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DOMAIN power gating control is now required to be done via firmware
due to interlock with other power features. This is to avoid
intermittent issues in the LB memories.
[How]
If the firmware supports the command then use the new firmware as
the sequence can avoid potential display corruption issues.
The command will be ignored on firmware that does not support DOMAIN
power control and the pipes will remain always on - frequent PG cycling
can cause the issue to occur on the old sequence, so we should avoid it.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When xnack is on user space can use svm page restore to set a vm range without
setup it first, then use regular api to register. Currently kfd api and svm are
not interoperable. We already have check on that, but for user buffer the mapping
address is not same as buffer cpu virtual address. Add checking on that to
avoid error propagate to hmm.
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
