Add an architecture specific ucall.h and inline the simple arch hooks,
e.g. the init hook for everything except ARM, and the actual "do ucall"
hook for everything except x86 (which should be simple, but temporarily
isn't due to carrying a workaround).
Having a per-arch ucall header will allow adding a #define for the
expected KVM exit reason for a ucall that is colocated (for everything
except x86) with the ucall itself.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230731203026.1192091-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM selftests, and an AMX/XCR0 bugfix, for 6.4:
- Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if XTILE_DATA is
not being reported due to userspace not opting in via prctl()
- Overhaul the AMX selftests to improve coverage and cleanup the test
- Misc cleanups
Check both architectural rules and KVM's ABI for KVM_GET_SUPPORTED_CPUID
to ensure the supported xfeatures[1] don't violate any of them.
The architectural rules[2] and KVM's contract with userspace ensure for a
given feature, e.g. sse, avx, amx, etc... their associated xfeatures are
either all sets or none of them are set, and any dependencies are enabled
if needed.
[1] EDX:EAX of CPUID.(EAX=0DH,ECX=0)
[2] SDM vol 1, 13.3 ENABLING THE XSAVE FEATURE SET AND XSAVE-ENABLED
FEATURES
Cc: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
[sean: expand comments, use a fancy X86_PROPERTY]
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Tested-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230405004520.421768-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Take the XFeature mask in __vm_xsave_require_permission() instead of the
bit so that there's no need to define macros for both the bit and the
mask. Asserting that only a single bit is set and retrieving said bit
is easy enough via log2 helpers.
Opportunistically clean up the error message for the
ARCH_REQ_XCOMP_GUEST_PERM sanity check.
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Tested-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230405004520.421768-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Assert that KVM provides "read what you wrote" semantics for all "durable"
MSRs (for lack of a better name). The extra coverage is cheap from a
runtime performance perspective, and verifying the behavior in the common
helper avoids gratuitous copy+paste in individual tests.
Note, this affects all tests that set MSRs from userspace!
Link: https://lore.kernel.org/r/20230311004618.920745-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reimplement vcpu_set_msr() as a macro and pretty print the failing MSR
(when possible) and the value if KVM_SET_MSRS fails instead of using the
using the standard KVM_IOCTL_ERROR(). KVM_SET_MSRS is somewhat odd in
that it returns the index of the last successful write, i.e. will be
'0' on failure barring an entirely different KVM bug. And for writing
MSRs, the MSR being written and the value being written are almost always
relevant to the failure, i.e. just saying "failed!" doesn't help debug.
Place the string goo in a separate macro in anticipation of using it to
further expand MSR testing.
Link: https://lore.kernel.org/r/20230311004618.920745-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a working xstate data structure for the usage of AMX and potential
future usage on other xstate components. AMX selftest requires checking
both the xstate_bv and xcomp_bv. Existing code relies on pointer
arithmetics to fetch xstate_bv and does not support xcomp_bv.
So, add a working xstate data structure into processor.h for x86.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230221163655.920289-3-mizhang@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add wrappers to do hypercalls using VMCALL/VMMCALL and Xen's register ABI
(as opposed to full Xen-style hypercalls through a hypervisor provided
page). Using the common helpers dedups a pile of code, and uses the
native hypercall instruction when running on AMD.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM selftests changes for 6.3:
- Cache the CPU vendor (AMD vs. Intel) and use the info to emit the correct
hypercall instruction instead of relying on KVM to patch in VMMCALL
- A variety of one-off cleanups and fixes
Add a test for the newly introduced Hyper-V invariant TSC control feature:
- HV_X64_MSR_TSC_INVARIANT_CONTROL is not available without
HV_ACCESS_TSC_INVARIANT CPUID bit set and available with it.
- BIT(0) of HV_X64_MSR_TSC_INVARIANT_CONTROL controls the filtering of
architectural invariant TSC (CPUID.80000007H:EDX[8]) bit.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013095849.705943-8-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Misc KVM x86 fixes and cleanups for 6.2:
- One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
- Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few
years back when eliminating unnecessary barriers when switching between
vmcs01 and vmcs02.
- Clean up the MSR filter docs.
- Clean up vmread_error_trampoline() to make it more obvious that params
must be passed on the stack, even for x86-64.
- Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective
of the current guest CPUID.
- Fudge around a race with TSC refinement that results in KVM incorrectly
thinking a guest needs TSC scaling when running on a CPU with a
constant TSC, but no hardware-enumerated TSC frequency.
Define and use kvm_static_assert() in the common KVM selftests headers to
provide deterministic behavior, and to allow creating static asserts
without dummy messages.
The kernel's static_assert() makes the message param optional, and on the
surface, tools/include/linux/build_bug.h appears to follow suit. However,
glibc may override static_assert() and redefine it as a direct alias of
_Static_assert(), which makes the message parameter mandatory. This leads
to non-deterministic behavior as KVM selftests code that utilizes
static_assert() without a custom message may or not compile depending on
the order of includes. E.g. recently added asserts in
x86_64/processor.h fail on some systems with errors like
In file included from lib/memstress.c:11:0:
include/x86_64/processor.h: In function ‘this_cpu_has_p’:
include/x86_64/processor.h:193:34: error: expected ‘,’ before ‘)’ token
static_assert(low_bit < high_bit); \
^
due to _Static_assert() expecting a comma before a message. The "message
optional" version of static_assert() uses macro magic to strip away the
comma when presented with empty an __VA_ARGS__
#ifndef static_assert
#define static_assert(expr, ...) __static_assert(expr, ##__VA_ARGS__, #expr)
#define __static_assert(expr, msg, ...) _Static_assert(expr, msg)
#endif // static_assert
and effectively generates "_Static_assert(expr, #expr)".
The incompatible version of static_assert() gets defined by this snippet
in /usr/include/assert.h:
#if defined __USE_ISOC11 && !defined __cplusplus
# undef static_assert
# define static_assert _Static_assert
#endif
which yields "_Static_assert(expr)" and thus fails as above.
KVM selftests don't actually care about using C11, but __USE_ISOC11 gets
defined because of _GNU_SOURCE, which many tests do #define. _GNU_SOURCE
triggers a massive pile of defines in /usr/include/features.h, including
_ISOC11_SOURCE:
/* If _GNU_SOURCE was defined by the user, turn on all the other features. */
#ifdef _GNU_SOURCE
# undef _ISOC95_SOURCE
# define _ISOC95_SOURCE 1
# undef _ISOC99_SOURCE
# define _ISOC99_SOURCE 1
# undef _ISOC11_SOURCE
# define _ISOC11_SOURCE 1
# undef _POSIX_SOURCE
# define _POSIX_SOURCE 1
# undef _POSIX_C_SOURCE
# define _POSIX_C_SOURCE 200809L
# undef _XOPEN_SOURCE
# define _XOPEN_SOURCE 700
# undef _XOPEN_SOURCE_EXTENDED
# define _XOPEN_SOURCE_EXTENDED 1
# undef _LARGEFILE64_SOURCE
# define _LARGEFILE64_SOURCE 1
# undef _DEFAULT_SOURCE
# define _DEFAULT_SOURCE 1
# undef _ATFILE_SOURCE
# define _ATFILE_SOURCE 1
#endif
which further down in /usr/include/features.h leads to:
/* This is to enable the ISO C11 extension. */
#if (defined _ISOC11_SOURCE \
|| (defined __STDC_VERSION__ && __STDC_VERSION__ >= 201112L))
# define __USE_ISOC11 1
#endif
To make matters worse, /usr/include/assert.h doesn't guard against
multiple inclusion by turning itself into a nop, but instead #undefs a
few macros and continues on. As a result, it's all but impossible to
ensure the "message optional" version of static_assert() will actually be
used, e.g. explicitly including assert.h and #undef'ing static_assert()
doesn't work as a later inclusion of assert.h will again redefine its
version.
#ifdef _ASSERT_H
# undef _ASSERT_H
# undef assert
# undef __ASSERT_VOID_CAST
# ifdef __USE_GNU
# undef assert_perror
# endif
#endif /* assert.h */
#define _ASSERT_H 1
#include <features.h>
Fixes: fcba483e82 ("KVM: selftests: Sanity check input to ioctls() at build time")
Fixes: ee37955366 ("KVM: selftests: Refactor X86_FEATURE_* framework to prep for X86_PROPERTY_*")
Fixes: 53a7dc0f21 ("KVM: selftests: Add X86_PROPERTY_* framework to retrieve CPUID values")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221122013309.1872347-1-seanjc@google.com
Restore the assert (on x86-64) that <10% of pages are still idle when NOT
running as a nested VM in the access tracking test. The original assert
was converted to a "warning" to avoid false failures when running the
test in a VM, but the non-nested case does not suffer from the same
"infinite TLB size" issue.
Using the HYPERVISOR flag isn't infallible as VMMs aren't strictly
required to enumerate the "feature" in CPUID, but practically speaking
anyone that is running KVM selftests in VMs is going to be using a VMM
and hypervisor that sets the HYPERVISOR flag.
Cc: David Matlack <dmatlack@google.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221129175300.4052283-3-seanjc@google.com
Verify the KVM allows userspace to set all supported bits in the
IA32_FEATURE_CONTROL MSR irrespective of the current guest CPUID, and
that all unsupported bits are rejected.
Throw the testcase into vmx_msrs_test even though it's not technically a
VMX MSR; it's close enough, and the most frequently feature controlled by
the MSR is VMX.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220607232353.3375324-4-seanjc@google.com
vmmcall()/vmcall() are used to exit from L2 to L1 and no concrete hypercall
ABI is currenty followed. With the introduction of Hyper-V L2 TLB flush
it becomes (theoretically) possible that L0 will take responsibility for
handling the call and no L1 exit will happen. Prevent this by stuffing RAX
(KVM ABI) and RCX (Hyper-V ABI) with 'safe' values.
While on it, convert vmmcall() to 'static inline', make it setup stack
frame and move to include/x86_64/svm_util.h.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-45-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to pollute VMX and SVM code with Hyper-V specific
stuff and allocate Hyper-V specific test pages for all test as only
few really need them. Create a dedicated struct and an allocation
helper.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-43-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation to putting Hyper-V specific test pages to a dedicated
struct, move eVMCS load logic from load_vmcs(). Tests call load_vmcs()
directly and the only one which needs 'enlightened' version is
evmcs_test so there's not much gain in having this merged.
Temporary pass both GPA and HVA to load_evmcs().
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-42-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a selftest for Hyper-V PV TLB flush hypercalls
(HvFlushVirtualAddressSpace/HvFlushVirtualAddressSpaceEx,
HvFlushVirtualAddressList/HvFlushVirtualAddressListEx).
The test creates one 'sender' vCPU and two 'worker' vCPU which do busy
loop reading from a certain GVA checking the observed value. Sender
vCPU swaos the data page with another page filled with a different value.
The expectation for workers is also altered. Without TLB flush on worker
vCPUs, they may continue to observe old value. To guard against accidental
TLB flushes for worker vCPUs the test is repeated 100 times.
Hyper-V TLB flush hypercalls are tested in both 'normal' and 'XMM
fast' modes.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-38-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a selftest for Hyper-V PV IPI hypercalls
(HvCallSendSyntheticClusterIpi, HvCallSendSyntheticClusterIpiEx).
The test creates one 'sender' vCPU and two 'receiver' vCPU and then
issues various combinations of send IPI hypercalls in both 'normal'
and 'fast' (with XMM input where necessary) mode. Later, the test
checks whether IPIs were delivered to the expected destination vCPU[s].
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-34-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a union to provide hv_enlightenments side-by-side with the sw_reserved
bytes that Hyper-V's enlightenments overlay. Casting sw_reserved
everywhere is messy, confusing, and unnecessarily unsafe.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move Hyper-V's VMCB "struct hv_enlightenments" to the svm.h header so
that the struct can be referenced in "struct vmcb_control_area".
Alternatively, a dedicated header for SVM+Hyper-V could be added, a la
x86_64/evmcs.h, but it doesn't appear that Hyper-V will end up needing
a wholesale replacement for the VMCB.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes three issues in nested SVM:
1) in the shutdown_interception() vmexit handler we call kvm_vcpu_reset().
However, if running nested and L1 doesn't intercept shutdown, the function
resets vcpu->arch.hflags without properly leaving the nested state.
This leaves the vCPU in inconsistent state and later triggers a kernel
panic in SVM code. The same bug can likely be triggered by sending INIT
via local apic to a vCPU which runs a nested guest.
On VMX we are lucky that the issue can't happen because VMX always
intercepts triple faults, thus triple fault in L2 will always be
redirected to L1. Plus, handle_triple_fault() doesn't reset the vCPU.
INIT IPI can't happen on VMX either because INIT events are masked while
in VMX mode.
Secondarily, KVM doesn't honour SHUTDOWN intercept bit of L1 on SVM.
A normal hypervisor should always intercept SHUTDOWN, a unit test on
the other hand might want to not do so.
Finally, the guest can trigger a kernel non rate limited printk on SVM
from the guest, which is fixed as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When checking for nEPT support in KVM, use kvm_get_feature_msr() instead
of vcpu_get_msr() to retrieve KVM's default TRUE_PROCBASED_CTLS and
PROCBASED_CTLS2 MSR values, i.e. don't require a VM+vCPU to query nEPT
support.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20220927165209.930904-1-dmatlack@google.com
[sean: rebase on merged code, write changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop kvm_get_supported_cpuid_entry() and its inner helper now that all
known usage can use X86_FEATURE_*, X86_PROPERTY_*, X86_PMU_FEATURE_*, or
the dedicated Family/Model helpers. Providing "raw" access to CPUID
leafs is undesirable as it encourages open coding CPUID checks, which is
often error prone and not self-documenting.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006005125.680782-13-seanjc@google.com
Add KVM variants of the x86 Family and Model helpers, and use them in the
PMU event filter test. Open code the retrieval of KVM's supported CPUID
entry 0x1.0 in anticipation of dropping kvm_get_supported_cpuid_entry().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006005125.680782-12-seanjc@google.com
Add dedicated helpers for getting x86's Family and Model, which are the
last holdouts that "need" raw access to CPUID information. FMS info is
a mess and requires not only splicing together multiple values, but
requires doing so conditional in the Family case.
Provide wrappers to reduce the odds of copy+paste errors, but mostly to
allow for the eventual removal of kvm_get_supported_cpuid_entry().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006005125.680782-11-seanjc@google.com
Add an X86_PMU_FEATURE_* framework to simplify probing architectural
events on Intel PMUs, which require checking the length of a bit vector
and the _absence_ of a "feature" bit. Add helpers for both KVM and
"this CPU", and use the newfangled magic (along with X86_PROPERTY_*)
to clean up pmu_event_filter_test.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006005125.680782-10-seanjc@google.com
