Add negative testing of all immutable bits in PERF_CAPABILITIES, i.e.
single bits that are reserved-0 or are effectively reserved-1 by KVM.
Omit LBR and PEBS format bits from the test as it's easier to test them
manually than it is to add safeguards to the comment path, e.g. toggling
a single bit can yield a format of '0', which is legal as a "disable"
value.
Link: https://lore.kernel.org/r/20230311004618.920745-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Split the PERF_CAPABILITIES subtests into two parts so that the LBR format
testcases don't execute after KVM_RUN. Similar to the guest CPUID model,
KVM will soon disallow changing PERF_CAPABILITIES after KVM_RUN, at which
point attempting to set the MSR after KVM_RUN will yield false positives
and/or false negatives depending on what the test is trying to do.
Land the LBR format test in a more generic "immutable features" test in
anticipation of expanding its scope to other immutable features.
Link: https://lore.kernel.org/r/20230311004618.920745-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the checks on XSAVE and OSXSAVE into init_regs() so that the XSAVE
check is done before setting CR4.OSXSAVE, i.e. before a potential #GP, and
so that the OSXSAVE check is performend immediately after enabling XSAVE
in CR4.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230221163655.920289-12-mizhang@google.com
[sean: keep XSAVE check, rewrite changelog accordingly]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Assert that both XTILE{CFG,DATA} are written and read back via XSETBV and
XGETBV respectively. The original check in amx_test only ensures at least
one of the XTILE bits are set, XTILECFG or XTILEDATA, when it really
should be checking that both are set.
Fixes: bf70636d94 ("selftest: kvm: Add amx selftest")
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230221163655.920289-11-mizhang@google.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Assert that XTILE is XSAVE-enabled. check_xsave_supports_xtile() doesn't
actually check anything since its return value is not used. Add the
intended assert.
Opportunistically, move the assert to a more appropriate location:
immediately after XSETBV and remove check_xsave_supports_xtile().
Fixes: 5dc19f1c7d ("KVM: selftests: Convert AMX test to use X86_PROPRETY_XXX")
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230221163655.920289-10-mizhang@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add asserts to verify the XSTATE metadata for XTILE_DATA isn't affected
by disabling AMX tile data via IA32_XFD. XFD doesn't intercept XSAVE,
it only prevents setting bits in XCR0, i.e. regardless of XFD, AMX state
is managed by XSAVE/XRSTOR as long as the corresponding bits are set XCR0.
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230221163655.920289-9-mizhang@google.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add an extra check to IA32_XFD to ensure that XTILE_DATA is actually set,
i.e. is consistent with the AMX architecture. In addition, repeat the
checks after the guest/host world switch to ensure the values of IA32_XFD
and IA32_XFD_ERR are well preserved.
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230221163655.920289-7-mizhang@google.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Be extra paranoid and assert that CR0.TS is clear when verifying the #NM
in the AMX test is due to the expected XFeature Disable error, i.e. that
the #NM isn't due to CR0.TS=1.
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230221163655.920289-6-mizhang@google.com
[sean: reword changelog to make it clear this is pure paranoia]
Signed-off-by: Sean Christopherson <seanjc@google.com>
After tilerelease instruction, AMX tiles are in INIT state. According to
Intel SDM vol 1. 13.10: "If RFBM[i] = 1, XSTATE_BV[i] is set to the
value of XINUSE[i].", XSTATE_BV[18] should be cleared after xsavec.
On the other hand, according to Intel SDM vol 1. 13.4.3: "If XCOMP_BV[i] =
1, state component i is located at a byte offset locationI from the base
address of the XSAVE area". Since at the time of xsavec, XCR0[18] is set
indicating AMX tile data component is still enabled, xcomp_bv[18] should be
set.
Complete the checks by adding the assert to xcomp_bv[18] after xsavec.
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230221163655.920289-5-mizhang@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
After the execution of __tilerelease(), AMX component will be in INIT
state. Therefore, execution of XSAVEC saving the AMX state into memory will
cause the xstate_bv[18] cleared in xheader. However, the xcomp_bv[18] will
remain set. Fix the error in comment. Also, update xsavec() to XSAVEC
because xcomp_bv[18] is set due to the instruction, not the function.
Finally, use XTILEDATA instead 'bit 18' in comments.
Cc: Jim Mattson <jmattson@google.com>
Cc: Venkatesh Srinivas <venkateshs@google.com>
Cc: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230221163655.920289-4-mizhang@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a working xstate data structure for the usage of AMX and potential
future usage on other xstate components. AMX selftest requires checking
both the xstate_bv and xcomp_bv. Existing code relies on pointer
arithmetics to fetch xstate_bv and does not support xcomp_bv.
So, add a working xstate data structure into processor.h for x86.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20230221163655.920289-3-mizhang@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Running x86_64/pmu_event_filter_test or x86_64/vmx_pmu_caps_test
with enable_pmu globally disabled will report the following into:
1..0 # SKIP - Requirement not met: use_intel_pmu() || use_amd_pmu()
or
1..0 # SKIP - Requirement not met: kvm_cpu_has(X86_FEATURE_PDCM)
this can be confusing, so add a check on kvm.enable_pmu.
Signed-off-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20230313085311.25327-3-likexu@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The xen_shinfo_test started off with very few iterations, and the numbers
we used in GUEST_SYNC() were precisely mapped to the RUNSTATE_xxx values
anyway to start with.
It has since grown quite a few more tests, and it's kind of awful to be
handling them all as bare numbers. Especially when I want to add a new
test in the middle. Define an enum for the test stages, and use it both
in the guest code and the host switch statement.
No functional change, if I can count to 24.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add wrappers to do hypercalls using VMCALL/VMMCALL and Xen's register ABI
(as opposed to full Xen-style hypercalls through a hypervisor provided
page). Using the common helpers dedups a pile of code, and uses the
native hypercall instruction when running on AMD.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM x86 APIC changes for 6.3:
- Remove a superfluous variables from apic_get_tmcct()
- Fix various edge cases in x2APIC MSR emulation
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Reset xAPIC when userspace forces "impossible" x2APIC => xAPIC transition
KVM/arm64 updates for 6.3
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place.
- Add support for taking stage-2 access faults in parallel. This was an
accidental omission in the original parallel faults implementation,
but should provide a marginal improvement to machines w/o FEAT_HAFDBS
(such as hardware from the fruit company).
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception handling
and masking unsupported features for nested guests.
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM.
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at reducing
the trap overhead of running nested.
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems.
- Avoid VM-wide stop-the-world operations when a vCPU accesses its own
redistributor.
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions
in the host.
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
This also drags in arm64's 'for-next/sme2' branch, because both it and
the PSCI relay changes touch the EL2 initialization code.
KVM/riscv changes for 6.3
- Fix wrong usage of PGDIR_SIZE to check page sizes
- Fix privilege mode setting in kvm_riscv_vcpu_trap_redirect()
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
KVM selftests changes for 6.3:
- Cache the CPU vendor (AMD vs. Intel) and use the info to emit the correct
hypercall instruction instead of relying on KVM to patch in VMMCALL
- A variety of one-off cleanups and fixes
KVM x86 PMU changes for 6.3:
- Add support for created masked events for the PMU filter to allow
userspace to heavily restrict what events the guest can use without
needing to create an absurd number of events
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel SPR
* kvm-arm64/misc:
: Miscellaneous updates
:
: - Convert CPACR_EL1_TTA to the new, generated system register
: definitions.
:
: - Serialize toggling CPACR_EL1.SMEN to avoid unexpected exceptions when
: accessing SVCR in the host.
:
: - Avoid quiescing the guest if a vCPU accesses its own redistributor's
: SGIs/PPIs, eliminating the need to IPI. Largely an optimization for
: nested virtualization, as the L1 accesses the affected registers
: rather often.
:
: - Conversion to kstrtobool()
:
: - Common definition of INVALID_GPA across architectures
:
: - Enable CONFIG_USERFAULTFD for CI runs of KVM selftests
KVM: arm64: Fix non-kerneldoc comments
KVM: selftests: Enable USERFAULTFD
KVM: selftests: Remove redundant setbuf()
arm64/sysreg: clean up some inconsistent indenting
KVM: MMU: Make the definition of 'INVALID_GPA' common
KVM: arm64: vgic-v3: Use kstrtobool() instead of strtobool()
KVM: arm64: vgic-v3: Limit IPI-ing when accessing GICR_{C,S}ACTIVER0
KVM: arm64: Synchronize SMEN on vcpu schedule out
KVM: arm64: Kill CPACR_EL1_TTA definition
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
As discussed[*], relabel the poorly named structs to align with the
current KVM nomenclature.
Old names are a leftover from before commit 52491a38b2 ("KVM:
Initialize gfn_to_pfn_cache locks in dedicated helper"), which i.a.
introduced kvm_gpc_init() and renamed kvm_gfn_to_pfn_cache_init()/
_destroy() to kvm_gpc_activate()/_deactivate(). Partly in an effort
to avoid implying that the cache really is destroyed/freed.
While at it, get rid of #define GPA_INVALID, which being used as a GFN,
is not only misnamed, but also unnecessarily reinvents a UAPI constant.
No functional change intended.
[*] https://lore.kernel.org/r/Y5yZ6CFkEMBqyJ6v@google.com
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20230206202430.1898057-1-mhal@rbox.co
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a sub-test to verify that KVM stuffs the APIC_ID when userspace forces
a transition from x2APIC to xAPIC without first disabling the APIC. Such
a transition is architecturally disallowed (WRMSR will #GP), but needs to
be handled by KVM to allow userspace to emulate RESET (ignoring that
userspace should also stuff local APIC state on RESET).
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Link: https://lore.kernel.org/r/20230109130605.2013555-3-eesposit@redhat.com
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Hyper-V extended hypercalls by default exit to userspace. Verify
userspace gets the call, update the result and then verify in guest
correct result is received.
Add KVM_EXIT_HYPERV to list of "known" hypercalls so errors generate
pretty strings.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20221212183720.4062037-14-vipinsh@google.com
[sean: add KVM_EXIT_HYPERV to exit_reasons_known]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add testing to show that a pmu event can be filtered with a generalized
match on it's unit mask.
These tests set up test cases to demonstrate various ways of filtering
a pmu event that has multiple unit mask values. It does this by
setting up the filter in KVM with the masked events provided, then
enabling three pmu counters in the guest. The test then verifies that
the pmu counters agree with which counters should be counting and which
counters should be filtered for both a sparse filter list and a dense
filter list.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20221220161236.555143-8-aaronlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Test that masked events are not using invalid bits, and if they are,
ensure the pmu event filter is not accepted by KVM_SET_PMU_EVENT_FILTER.
The only valid bits that can be used for masked events are set when
using KVM_PMU_ENCODE_MASKED_ENTRY() with one exception: If any of the
high bits (35:32) of the event select are set when using Intel, the pmu
event filter will fail.
Also, because validation was not being done prior to the introduction
of masked events, only expect validation to fail when masked events
are used. E.g. in the first test a filter event with all its bits set
is accepted by KVM_SET_PMU_EVENT_FILTER when flags = 0.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20221220161236.555143-7-aaronlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
reclaim_period_ms used to be positive only but the commit 0001725d0f
("KVM: selftests: Add atoi_positive() and atoi_non_negative() for input
validation") incorrectly changed it to non-negative validation.
Change validation to allow only positive input.
Fixes: 0001725d0f ("KVM: selftests: Add atoi_positive() and atoi_non_negative() for input validation")
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reported-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230111183408.104491-1-vipinsh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Placing a declaration of evt_reset is pedantically invalid
according to the C standard. While GCC does not really care
and only warns with -Wpedantic, clang ignores the declaration
altogether with an error:
x86_64/xen_shinfo_test.c:965:2: error: expected expression
struct kvm_xen_hvm_attr evt_reset = {
^
x86_64/xen_shinfo_test.c:969:38: error: use of undeclared identifier evt_reset
vm_ioctl(vm, KVM_XEN_HVM_SET_ATTR, &evt_reset);
^
Reported-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Reported-by: Sean Christopherson <seanjc@google.com>
Fixes: a79b53aaaa ("KVM: x86: fix deadlock for KVM_XEN_EVTCHN_RESET", 2022-12-28)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a test for the newly introduced Hyper-V invariant TSC control feature:
- HV_X64_MSR_TSC_INVARIANT_CONTROL is not available without
HV_ACCESS_TSC_INVARIANT CPUID bit set and available with it.
- BIT(0) of HV_X64_MSR_TSC_INVARIANT_CONTROL controls the filtering of
architectural invariant TSC (CPUID.80000007H:EDX[8]) bit.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013095849.705943-8-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enhance 'hyperv_features' selftest by adding a check that KVM
preserves values written to PV MSRs. Two MSRs are, however, 'special':
- HV_X64_MSR_EOI as it is a 'write-only' MSR,
- HV_X64_MSR_RESET as it always reads as '0'.
The later doesn't require any special handling right now because the
test never writes anything besides '0' to the MSR, leave a TODO node
about the fact.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013095849.705943-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It may not be clear what 'msr->available' means. The test actually
checks that accessing the particular MSR doesn't cause #GP, rename
the variable accordingly.
While on it, use 'true'/'false' instead of '1'/'0' for 'write'/
'fault_expected' as these are boolean.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013095849.705943-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 8fda37cf3d ("KVM: selftests: Stuff RAX/RCX with 'safe' values
in vmmcall()/vmcall()", 2022-11-21) broke the svm_nested_soft_inject_test
because it placed a "pop rbp" instruction after vmmcall. While this is
correct and mimics what is done in the VMX case, this particular test
expects a ud2 instruction right after the vmmcall, so that it can skip
over it in the L1 part of the test.
Inline a suitably-modified version of vmmcall() to restore the
functionality of the test.
Fixes: 8fda37cf3d ("KVM: selftests: Stuff RAX/RCX with 'safe' values in vmmcall()/vmcall()"
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221130181147.9911-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While KVM_XEN_EVTCHN_RESET is usually called with no vCPUs running,
if that happened it could cause a deadlock. This is due to
kvm_xen_eventfd_reset() doing a synchronize_srcu() inside
a kvm->lock critical section.
To avoid this, first collect all the evtchnfd objects in an
array and free all of them once the kvm->lock critical section
is over and th SRCU grace period has expired.
Reported-by: Michal Luczaj <mhal@rbox.co>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
