This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Pull more MM updates from Andrew Morton:
- "mm/vmscan: fix demotion targets checks in reclaim/demotion" fixes a
couple of issues in the demotion code - pages were failed demotion
and were finding themselves demoted into disallowed nodes (Bing Jiao)
- "Remove XA_ZERO from error recovery of dup_mmap()" fixes a rare
mapledtree race and performs a number of cleanups (Liam Howlett)
- "mm: add bitmap VMA flag helpers and convert all mmap_prepare to use
them" implements a lot of cleanups following on from the conversion
of the VMA flags into a bitmap (Lorenzo Stoakes)
- "support batch checking of references and unmapping for large folios"
implements batching to greatly improve the performance of reclaiming
clean file-backed large folios (Baolin Wang)
- "selftests/mm: add memory failure selftests" does as claimed (Miaohe
Lin)
* tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (36 commits)
mm/page_alloc: clear page->private in free_pages_prepare()
selftests/mm: add memory failure dirty pagecache test
selftests/mm: add memory failure clean pagecache test
selftests/mm: add memory failure anonymous page test
mm: rmap: support batched unmapping for file large folios
arm64: mm: implement the architecture-specific clear_flush_young_ptes()
arm64: mm: support batch clearing of the young flag for large folios
arm64: mm: factor out the address and ptep alignment into a new helper
mm: rmap: support batched checks of the references for large folios
tools/testing/vma: add VMA userland tests for VMA flag functions
tools/testing/vma: separate out vma_internal.h into logical headers
tools/testing/vma: separate VMA userland tests into separate files
mm: make vm_area_desc utilise vma_flags_t only
mm: update all remaining mmap_prepare users to use vma_flags_t
mm: update shmem_[kernel]_file_*() functions to use vma_flags_t
mm: update secretmem to use VMA flags on mmap_prepare
mm: update hugetlbfs to use VMA flags on mmap_prepare
mm: add basic VMA flag operation helper functions
tools: bitmap: add missing bitmap_[subset(), andnot()]
mm: add mk_vma_flags() bitmap flag macro helper
...
Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs
- xe has a lot of SR-IOV and SVM improvements
- lots of intel display refactoring across i915/xe
- msm has more support for gen8 platforms
- Given up on kgdb/kms integration, it's too hard on modern hw
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors
- Use pin_init::zeroed() for fops initialization
- Annotate DRM helpers with __rust_helper
- Improve safety documentation for gem::Object::new()
- Update AlwaysRefCounted imports
- mm: Prevent integer overflow in page_align()
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switch to use virtual planes by default
- Fix DSI CMD panels on DPU 3.x
- Rewrite format handling to remove intermediate representation
- Fix watchdog on DPU 8.x+
- Fix TE / Vsync source setting on DPU 8.x+
- Add 3D_Mux on SC7280
- Kaanapali platform support
- Fix UBWC register programming
- Make RM reserve DSPP-enabled mixers for CRTCs with LMs
- Gamma correction support
- DP:
- Enable support for eDP 1.4+ link rate tables
- Fix MDSS1 DP indices on SA8775P, making them to work
- Fix msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Document QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switch to divider_determine_rate()
- MDP5:
- Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation
- Get rid of the Result<impl PinInit<T, E>> anti-pattern
- Relocate initializer-specific code into the appropriate initializer
- Use CStr::from_bytes_until_nul() to remove custom helpers
- Improve handling of unexpected firmware values
- Clean up redundant debug prints
- Replace c_str!() with native Rust C-string literals
- Update nova-core task list
nova:
- Align GEM object size to system page size
tyr:
- Use generated uAPI bindings for GpuInfo
- Replace manual sleeps with read_poll_timeout()
- Replace c_str!() with native Rust C-string literals
- Suppress warnings for unread fields
- Fix incorrect register name in print statement
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
* tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits)
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header
drm/xe/guc: Fix CFI violation in debugfs access.
accel/amdxdna: Move RPM resume into job run function
accel/amdxdna: Fix incorrect DPM level after suspend/resume
nouveau/vmm: start tracking if the LPT PTE is valid. (v6)
nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2)
nouveau/vmm: rewrite pte tracker using a struct and bitfields.
accel/amdxdna: Fix incorrect error code returned for failed chain command
accel/amdxdna: Remove hardware context status
drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe()
drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc
drm/i915/display: fix the pixel normalization handling for xe3p_lpd
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
...
Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Add the drm_gem_huge_mnt_create() and drm_gem_get_huge_mnt() helpers
to avoid code duplication in the i915, V3D, Panfrost and Panthor
drivers. The former creates and mounts a dedicated huge tmpfs
mountpoint, for the lifetime of a DRM device, used at GEM object
initialization. The latter retrieves the dedicated huge tmpfs
mountpoint used by a DRM device.
The next commits will port drivers to these helpers.
v3:
- store huge tmpfs mountpoint in drm_device
v4:
- return 0 in builds with CONFIG_TRANSPARENT_HUGEPAGE=n
- return 0 when huge_mnt already exists
- use new vfs_parse_fs_string() helper
v5:
- remove warning on !dev->huge_mnt and reset to NULL on free
- inline drm_gem_huge_mnt_create() to remove func from text and avoid
calls in builds with CONFIG_TRANSPARENT_HUGEPAGE=n
- compile out drm_device's huge_mnt field in builds with
CONFIG_TRANSPARENT_HUGEPAGE=n
- add drm_gem_has_huge_mnt() helper
v6:
- move huge_mnt doc into ifdef'd section
- either inline or export drm_gem_huge_mnt_create()
v7:
- include <drm/drm_device.h> in drm_gem.h
v9:
- replace drm_gem_has_huge_mnt() by drm_gem_get_huge_mnt()
v11:
- doc fixes
- add Boris and Maíra R-bs
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20251205182231.194072-5-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
mmap() calls on the DRM file pointer currently always end up using
mm_get_unmapped_area() to get a free mapping region. On builds with
CONFIG_TRANSPARENT_HUGEPAGE enabled, this isn't ideal for GEM objects
backed by shmem buffers on mountpoints setting the 'huge=' option
because it can't correctly figure out the potentially huge address
alignment required.
This commit introduces the drm_gem_get_unmapped_area() function which
is meant to be used as a get_unmapped_area file operation on the DRM
file pointer to lookup GEM objects based on their fake offsets and get
a properly aligned region by calling shmem_get_unmapped_area() with
the right file pointer. If a GEM object isn't available at the given
offset or if the caller isn't granted access to it, the function falls
back to mm_get_unmapped_area().
This also makes drm_gem_get_unmapped_area() part of the default GEM
file operations so that all the DRM drivers can benefit from more
efficient mappings thanks to the huge page fault handler introduced in
previous commit 'drm/shmem-helper: Add huge page fault handler'.
The shmem_get_unmapped_area() function needs to be exported so that
it can be used from the DRM subsystem.
v3:
- include <linux/sched/mm.h> in drm_gem.c
- forward to shmem layer in builds with CONFIG_TRANSPARENT_HUGEPAGE=n
v6:
- use GPL variant to export drm_gem_get_unmapped_area()
- don't export shmem_get_unmapped_area() anymore (use f_op instead)
v11:
- rename drm_gem_object_lookup_from_offset() to
drm_gem_object_lookup_at_offset()
- add Boris R-b
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251205182231.194072-4-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
There are two main ways that GPUVM might be used:
* staged mode, where VM_BIND ioctls update the GPUVM immediately so that
the GPUVM reflects the state of the VM *including* staged changes that
are not yet applied to the GPU's virtual address space.
* immediate mode, where the GPUVM state is updated during run_job(),
i.e., in the DMA fence signalling critical path, to ensure that the
GPUVM and the GPU's virtual address space has the same state at all
times.
Currently, only Panthor uses GPUVM in immediate mode, but the Rust
drivers Tyr and Nova will also use GPUVM in immediate mode, so it is
worth to support both staged and immediate mode well in GPUVM. To use
immediate mode, the GEMs gpuva list must be modified during the fence
signalling path, which means that it must be protected by a lock that is
fence signalling safe.
For this reason, a mutex is added to struct drm_gem_object that is
intended to achieve this purpose. Adding it directly in the GEM object
both makes it easier to use GPUVM in immediate mode, but also makes it
possible to take the gpuva lock from core drm code.
As a follow-up, another change that should probably be made to support
immediate mode is a mechanism to postpone cleanup of vm_bo objects, as
dropping a vm_bo object in the fence signalling path is problematic for
two reasons:
* When using DRM_GPUVM_RESV_PROTECTED, you cannot remove the vm_bo from
the extobj/evicted lists during the fence signalling path.
* Dropping a vm_bo could lead to the GEM object getting destroyed.
The requirement that GEM object cleanup is fence signalling safe is
dubious and likely to be violated in practice.
Panthor already has its own custom implementation of postponing vm_bo
cleanup.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250827-gpuva-mutex-in-gem-v3-1-bd89f5a82c0d@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
CRIU restore of drm buffer objects requires the ability to create
or import a buffer object with a specific gem handle.
Add new drm ioctl DRM_IOCTL_GEM_CHANGE_HANDLE, which takes
the gem handle of an object and moves that object to a
specified new gem handle.
This ioctl needs to call drm_prime_remove_buf_handle,
but that function acquires the prime lock, which the ioctl
needs to hold for other purposes.
Make drm_prime_remove_buf_handle not acquire the prime lock,
and change its other caller to reflect this.
The rest of the kernel patches required to enable CRIU can be
found at
https://lore.kernel.org/dri-devel/20250617194536.538681-1-David.Francis@amd.com/
v2 - Move documentation to UAPI headers
v3 - Always return 0 on success
Signed-off-by: David Francis <David.Francis@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250717143556.857893-2-David.Francis@amd.com
Object creation is a careful dance where we must guarantee that the
object is fully constructed before it is visible to other threads, and
GEM buffer objects are no difference.
Final publishing happens by calling drm_gem_handle_create(). After
that the only allowed thing to do is call drm_gem_object_put() because
a concurrent call to the GEM_CLOSE ioctl with a correctly guessed id
(which is trivial since we have a linear allocator) can already tear
down the object again.
Luckily most drivers get this right, the very few exceptions I've
pinged the relevant maintainers for. Unfortunately we also need
drm_gem_handle_create() when creating additional handles for an
already existing object (e.g. GETFB ioctl or the various bo import
ioctl), and hence we cannot have a drm_gem_handle_create_and_put() as
the only exported function to stop these issues from happening.
Now unfortunately the implementation of drm_gem_handle_create() isn't
living up to standards: It does correctly finishe object
initialization at the global level, and hence is safe against a
concurrent tear down. But it also sets up the file-private aspects of
the handle, and that part goes wrong: We fully register the object in
the drm_file.object_idr before calling drm_vma_node_allow() or
obj->funcs->open, which opens up races against concurrent removal of
that handle in drm_gem_handle_delete().
Fix this with the usual two-stage approach of first reserving the
handle id, and then only registering the object after we've completed
the file-private setup.
Jacek reported this with a testcase of concurrently calling GEM_CLOSE
on a freshly-created object (which also destroys the object), but it
should be possible to hit this with just additional handles created
through import or GETFB without completed destroying the underlying
object with the concurrent GEM_CLOSE ioctl calls.
Note that the close-side of this race was fixed in f6cd7daecf ("drm:
Release driver references to handle before making it available
again"), which means a cool 9 years have passed until someone noticed
that we need to make this symmetry or there's still gaps left :-/
Without the 2-stage close approach we'd still have a race, therefore
that's an integral part of this bugfix.
More importantly, this means we can have NULL pointers behind
allocated id in our drm_file.object_idr. We need to check for that
now:
- drm_gem_handle_delete() checks for ERR_OR_NULL already
- drm_gem.c:object_lookup() also chekcs for NULL
- drm_gem_release() should never be called if there's another thread
still existing that could call into an IOCTL that creates a new
handle, so cannot race. For paranoia I added a NULL check to
drm_gem_object_release_handle() though.
- most drivers (etnaviv, i915, msm) are find because they use
idr_find(), which maps both ENOENT and NULL to NULL.
- drivers using idr_for_each_entry() should also be fine, because
idr_get_next does filter out NULL entries and continues the
iteration.
- The same holds for drm_show_memory_stats().
v2: Use drm_WARN_ON (Thomas)
Reported-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Tested-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: stable@vger.kernel.org
Cc: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Signed-off-by: Simona Vetter <simona.vetter@intel.com>
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250707151814.603897-1-simona.vetter@ffwll.ch
If the callback is going to have to attempt to grab more locks, it is
useful to have an ww_acquire_ctx to avoid locking order problems.
Why not use the drm_exec helper instead? Mainly because (a) where
ww_acquire_init() is called is awkward, and (b) we don't really
need to retry after backoff, we can just move on to the next object.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661463/
A GEM handle can be released while the GEM buffer object is attached
to a DRM framebuffer. This leads to the release of the dma-buf backing
the buffer object, if any. [1] Trying to use the framebuffer in further
mode-setting operations leads to a segmentation fault. Most easily
happens with driver that use shadow planes for vmap-ing the dma-buf
during a page flip. An example is shown below.
[ 156.791968] ------------[ cut here ]------------
[ 156.796830] WARNING: CPU: 2 PID: 2255 at drivers/dma-buf/dma-buf.c:1527 dma_buf_vmap+0x224/0x430
[...]
[ 156.942028] RIP: 0010:dma_buf_vmap+0x224/0x430
[ 157.043420] Call Trace:
[ 157.045898] <TASK>
[ 157.048030] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.052436] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.056836] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.061253] ? drm_gem_shmem_vmap+0x74/0x710
[ 157.065567] ? dma_buf_vmap+0x224/0x430
[ 157.069446] ? __warn.cold+0x58/0xe4
[ 157.073061] ? dma_buf_vmap+0x224/0x430
[ 157.077111] ? report_bug+0x1dd/0x390
[ 157.080842] ? handle_bug+0x5e/0xa0
[ 157.084389] ? exc_invalid_op+0x14/0x50
[ 157.088291] ? asm_exc_invalid_op+0x16/0x20
[ 157.092548] ? dma_buf_vmap+0x224/0x430
[ 157.096663] ? dma_resv_get_singleton+0x6d/0x230
[ 157.101341] ? __pfx_dma_buf_vmap+0x10/0x10
[ 157.105588] ? __pfx_dma_resv_get_singleton+0x10/0x10
[ 157.110697] drm_gem_shmem_vmap+0x74/0x710
[ 157.114866] drm_gem_vmap+0xa9/0x1b0
[ 157.118763] drm_gem_vmap_unlocked+0x46/0xa0
[ 157.123086] drm_gem_fb_vmap+0xab/0x300
[ 157.126979] drm_atomic_helper_prepare_planes.part.0+0x487/0xb10
[ 157.133032] ? lockdep_init_map_type+0x19d/0x880
[ 157.137701] drm_atomic_helper_commit+0x13d/0x2e0
[ 157.142671] ? drm_atomic_nonblocking_commit+0xa0/0x180
[ 157.147988] drm_mode_atomic_ioctl+0x766/0xe40
[...]
[ 157.346424] ---[ end trace 0000000000000000 ]---
Acquiring GEM handles for the framebuffer's GEM buffer objects prevents
this from happening. The framebuffer's cleanup later puts the handle
references.
Commit 1a148af060 ("drm/gem-shmem: Use dma_buf from GEM object
instance") triggers the segmentation fault easily by using the dma-buf
field more widely. The underlying issue with reference counting has
been present before.
v2:
- acquire the handle instead of the BO (Christian)
- fix comment style (Christian)
- drop the Fixes tag (Christian)
- rename err_ gotos
- add missing Link tag
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://elixir.bootlin.com/linux/v6.15/source/drivers/gpu/drm/drm_gem.c#L241 # [1]
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Anusha Srivatsa <asrivats@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: <stable@vger.kernel.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250630084001.293053-1-tzimmermann@suse.de
Fix the compile-time warnings
drivers/gpu/drm/drm_gem.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gem_atomic_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gem_framebuffer_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gem_ttm_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gem_vram_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: a934a57a42 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612121633.229222-7-tzimmermann@suse.de
This was added by Sima +10 years ago as a solution to avoid exporting
multiple dma-bufs for the same GEM object. I tried to remove it before,
but wasn't 100% sure about all the side effects.
Now Thomas recent modified drm_gem_prime_handle_to_dmabuf() which makes
it obvious that this is a superflous step. We try to look up the DMA-buf
by handle handle and if that fails for some reason (must likely because
the handle is a duplicate) the code just use the DMA-buf from the GEM
object.
Just using the DMA-buf from the GEM object in the first place has the
same effect as far as I can see.
Some more history from Sima:
In d0b2c5334f ("drm/prime: Always add exported buffers to the handle
cache") I added this additional lookup. It wasn't part of the bugfix,
but back then the handle list was just a linked list and you could do
lookups in either direction. And I guess I felt like doing a quick lookup
before we grab the next lock makes sense. Premature optimization, I'm
confessing to the crime guilty as charged :-/
Then Chris Wilson in 077675c1e8 ("drm: Convert prime dma-buf <-> handle
to rbtree") and added 2 rb trees to support both directions. At that point
that handle2buf lookup really didn't make much sense anymore, but we just
kept it and it's been in the tree confusing people ever since.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250604113234.2520-1-christian.koenig@amd.com
Inline drm_gem_pin() into its only caller drm_gem_map_attach()
and update the documentation in the callback's purpose. Do the
equivalent for drm_gem_unpin(). Also add stricter error checking
on the involved locking.
The pin operation in the GEM object functions is a helper for
PRIME-exported buffer objects. Having drm_gem_pin() gives the
impression of a general-purpose interface, which is not the case.
Removing it makes the pin callback a bit harder to misuse.
v2:
- clarify comment on pin callback (Dmitry)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/r/20250526132634.531789-5-tzimmermann@suse.de
Add drm_gem_is_imported() that tests if a GEM object's buffer has
been imported. Update the GEM code accordingly.
GEM code usually tests for imports if import_attach has been set
in struct drm_gem_object. But attaching a dma-buf on import requires
a DMA-capable importer device, which is not the case for many serial
busses like USB or I2C. The new helper tests if a GEM object's dma-buf
has been created from the GEM object.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-2-tzimmermann@suse.de
For some applications, such as applications that uses huge pages, we might
want to have a different mountpoint, for which we pass mount flags that
better match our usecase.
Therefore, create a new function `drm_gem_object_init_with_mnt()` that
allow us to define the tmpfs mountpoint where the GEM object will be
created. If this parameter is NULL, then we fallback to `shmem_file_setup()`.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-5-mcanal@igalia.com
Temporarily lock the fbdev buffer object during updates to prevent
memory managers from evicting/moving the buffer. Moving a buffer
object while update its content results in undefined behaviour.
Fbdev-generic updates its buffer object from a shadow buffer. Gem-shmem
and gem-dma helpers do not move buffer objects, so they are safe to be
used with fbdev-generic. Gem-vram and qxl are based on TTM, but pin
buffer objects are part of the vmap operation. So both are also safe
to be used with fbdev-generic.
Amdgpu and nouveau do not pin or lock the buffer object during an
update. Their TTM-based memory management could move the buffer object
while the update is ongoing.
The new vmap_local and vunmap_local helpers hold the buffer object's
reservation lock during the buffer update. This prevents moving the
buffer object on all memory managers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> # virtio-gpu
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240227113853.8464-11-tzimmermann@suse.de
Acquire the buffer object's reservation lock in drm_gem_pin() and
remove locking the drivers' GEM callbacks where necessary. Same for
unpin().
DRM drivers and memory managers modified by this patch will now have
correct dma-buf locking semantics: the caller is responsible for
holding the reservation lock when calling the pin or unpin callback.
DRM drivers and memory managers that are not modified will now be
protected against concurent invocation of their pin and unpin callbacks.
PRIME does not implement struct dma_buf_ops.pin, which requires
the caller to hold the reservation lock. It does implement struct
dma_buf_ops.attach, which requires to callee to acquire the
reservation lock. The PRIME code uses drm_gem_pin(), so locks
are now taken as specified. Same for unpin and detach.
The patch harmonizes GEM pin and unpin to have non-interruptible
reservation locking across all drivers, as is already the case for
vmap and vunmap. This affects gem-shmem, gem-vram, loongson, qxl and
radeon.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> # virtio-gpu
Link: https://patchwork.freedesktop.org/patch/msgid/20240227113853.8464-10-tzimmermann@suse.de
Add infrastructure to keep track of GPU virtual address (VA) mappings
with a decicated VA space manager implementation.
New UAPIs, motivated by Vulkan sparse memory bindings graphics drivers
start implementing, allow userspace applications to request multiple and
arbitrary GPU VA mappings of buffer objects. The DRM GPU VA manager is
intended to serve the following purposes in this context.
1) Provide infrastructure to track GPU VA allocations and mappings,
using an interval tree (RB-tree).
2) Generically connect GPU VA mappings to their backing buffers, in
particular DRM GEM objects.
3) Provide a common implementation to perform more complex mapping
operations on the GPU VA space. In particular splitting and merging
of GPU VA mappings, e.g. for intersecting mapping requests or partial
unmap requests.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Donald Robson <donald.robson@imgtec.com>
Suggested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230720001443.2380-2-dakr@redhat.com
drm-misc-next for v6.6:
UAPI Changes:
* fbdev:
* Make fbdev userspace interfaces optional; only leaves the
framebuffer console active
* prime:
* Support dma-buf self-import for all drivers automatically: improves
support for many userspace compositors
Cross-subsystem Changes:
* backlight:
* Fix interaction with fbdev in several drivers
* base: Convert struct platform.remove to return void; part of a larger,
tree-wide effort
* dma-buf: Acquire reservation lock for mmap() in exporters; part
of an on-going effort to simplify locking around dma-bufs
* fbdev:
* Use Linux device instead of fbdev device in many places
* Use deferred-I/O helper macros in various drivers
* i2c: Convert struct i2c from .probe_new to .probe; part of a larger,
tree-wide effort
* video:
* Avoid including <linux/screen_info.h>
Core Changes:
* atomic:
* Improve logging
* prime:
* Remove struct drm_driver.gem_prime_mmap plus driver updates: all
drivers now implement this callback with drm_gem_prime_mmap()
* gem:
* Support execution contexts: provides locking over multiple GEM
objects
* ttm:
* Support init_on_free
* Swapout fixes
Driver Changes:
* accel:
* ivpu: MMU updates; Support debugfs
* ast:
* Improve device-model detection
* Cleanups
* bridge:
* dw-hdmi: Improve support for YUV420 bus format
* dw-mipi-dsi: Fix enable/disable of DSI controller
* lt9611uxc: Use MODULE_FIRMWARE()
* ps8640: Remove broken EDID code
* samsung-dsim: Fix command transfer
* tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
* Cleanups
* ingenic:
* Kconfig REGMAP fixes
* loongson:
* Support display controller
* mgag200:
* Minor fixes
* mxsfb:
* Support disabling overlay planes
* nouveau:
* Improve VRAM detection
* Various fixes and cleanups
* panel:
* panel-edp: Support AUO B116XAB01.4
* Support Visionox R66451 plus DT bindings
* Cleanups
* ssd130x:
* Support per-controller default resolution plus DT bindings
* Reduce memory-allocation overhead
* Cleanups
* tidss:
* Support TI AM625 plus DT bindings
* Implement new connector model plus driver updates
* vkms
* Improve write-back support
* Documentation fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230713090830.GA23281@linux-uq9g
main pull request for v6.4
Core Display:
============
* Bugfixes for error handling during probe
* rework UBWC decoder programming
* prepare_commit cleanup
* bindings for SM8550 (MDSS, DPU), SM8450 (DP)
* timeout calculation fixup
* atomic: use drm_crtc_next_vblank_start() instead of our own
custom thing to calculate the start of next vblank
DP:
==
* interrupts cleanup
DPU:
===
* DSPP sub-block flush on sc7280
* support AR30 in addition to XR30 format
* Allow using REC_0 and REC_1 to handle wide (4k) RGB planes
* Split the HW catalog into individual per-SoC files
DSI:
===
* rework DSI instance ID detection on obscure platforms
GPU:
===
* uapi C++ compatibility fix
* a6xx: More robust gdsc reset
* a3xx and a4xx devfreq support
* update generated headers
* various cleanups and fixes
* GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
* dma-fence deadline hint support and wait-boost
* a640 speedbin support
* a650 speedbin support
Conflicts in drivers/gpu/drm/msm/adreno/adreno_gpu.c:
Conflict between the 7fa5047a43 ("drm: Use of_property_present() for
testing DT property presence") and 9f251f9340 ("drm/msm/adreno: Use
OPP for every GPU generation"). The latter removed the of_ function
call outright, so I went with what's in the PR unchanged.
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvwuj5tabyW910+N-B=5kFNAC7QNYoQ=0xi3roBjQvFFQ@mail.gmail.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
I just landed the fence deadline PR from Rob that a bunch of drivers
want/need to apply driver-specific patches. Backmerge -rc4 so that
they don't have to be stuck on -rc2 for no reason at all.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
