Pull devicetree updates from Rob Herring:
"DT core:
- Add cleanup.h based auto release of struct device_node pointers via
__free marking and new for_each_child_of_node_scoped() iterator to
use it.
- Always create a base skeleton DT when CONFIG_OF is enabled. This
supports several usecases of adding DT data on non-DT booted
systems.
- Move around some /reserved-memory code in preparation for further
improvements
- Add a stub for_each_property_of_node() for !OF
- Adjust the printk levels on some messages
- Fix __be32 sparse warning
- Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
(currently orphaned)
- Add Saravana Kannan and drop Frank Rowand as DT maintainers
DT bindings:
- Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
xlnx,sd-fec to DT schemas
- Add existing, but undocumented fsl,imx-anatop binding
- Add bunch of undocumented vendor prefixes used in compatible
strings
- Drop obsolete brcm,bcm2835-pm-wdt binding
- Drop obsolete i2c.txt which as been replaced with schema in
dtschema
- Add DPS310 device and sort trivial-devices.yaml
- Enable undocumented compatible checks on DT binding examples
- More QCom maintainer fixes/updates
- Updates to writing-schema.rst and DT submitting-patches.rst to
cover some frequent review comments
- Clean-up SPDX tags to use 'OR' rather than 'or'"
* tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
of: unittest: Use for_each_child_of_node_scoped()
of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
of: Add cleanup.h based auto release via __free(device_node) markings
of: Move all FDT reserved-memory handling into of_reserved_mem.c
of: Add KUnit test to confirm DTB is loaded
of: unittest: treat missing of_root as error instead of fixing up
x86/of: Unconditionally call unflatten_and_copy_device_tree()
um: Unconditionally call unflatten_device_tree()
of: Create of_root if no dtb provided by firmware
of: Always unflatten in unflatten_and_copy_device_tree()
dt-bindings: timer: mediatek: Convert to json-schema
dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support
soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage
dt-bindings: fsl-imx-sdma: fix HDMI audio index
dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6
dt-bindings: soc: imx: fsl,imx-anatop: add binding
dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML
dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
of: make for_each_property_of_node() available to to !OF
...
Convert the Marvell MMP DMA binding to YAML.
The TXT binding mentions that the controller may have one IRQ per DMA
channel. Examples of this were dropped in the YAML binding because of
dt_binding_check complaints (either too many interrupt cells or
interrupts) and the fact that this is not used in any of the in-tree
device trees.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240131-pxa-dma-yaml-v2-2-9611d0af0edc@skole.hr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DMA controllers found on the H616 and H618 are the same as the one
found on the A100. The only difference is the DMA endpoint (DRQ) layout.
Since the number of channels and endpoints are described with additional
generic properties, just add a new H616-specific compatible string and
fallback to the A100 one.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240127163247.384439-5-wens@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The compatibles "ti,omap-sdma" and "ti,dra7-dma-crossbar" aren't documented
by a schema which causes warnings:
Documentation/devicetree/bindings/dma/dma-controller.example.dtb: /example-0/dma-controller@48000000: failed to match any schema with compatible: ['ti,omap-sdma']
Documentation/devicetree/bindings/dma/dma-router.example.dtb: /example-0/dma-router@4a002b78: failed to match any schema with compatible: ['ti,dra7-dma-crossbar']
As no one has cared to fix them, just drop them.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231122235050.2966280-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Unified DMA (UDMA) module on K3 SoCs have TX and RX channel cfg and RX
flow cfg register regions which are usually configured by a Device
Management firmware. But certain entities such as bootloader (like
U-Boot) may have to access them directly. Describe this region in the
binding documentation for completeness of module description.
Keep the binding compatible with existing DTS files by requiring first
four regions to be present at least.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-5-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Packet DMA (PKTDMA) module on K3 SoCs have ring cfg, TX and RX channel
cfg and RX flow cfg register regions which are usually configured by a
Device Management firmware. But certain entities such as bootloader
(like U-Boot) may have to access them directly. Describe this region in
the binding documentation for completeness of module description.
Keep the binding compatible with existing DTS files by requiring first
four regions to be present at least.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-4-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Block copy DMA(BCDMA)module on K3 SoCs have ring, BCHAN, TX and RX
channel cfg register regions which are usually configured by a Device
Management firmware. But certain entities such as bootloader (like
U-Boot) may have to access them directly. Describe this region in the
binding documentation for completeness of module description.
Keep the binding compatible with existing DTS files by requiring first
five regions to be present at least.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-3-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull dmaengine updates from Vinod Koul:
"New controller support and updates to drivers.
New support:
- Qualcomm SM6115 and QCM2290 dmaengine support
- at_xdma support for microchip,sam9x7 controller
Updates:
- idxd updates for wq simplification and ats knob updates
- fsl edma updates for v3 support
- Xilinx AXI4-Stream control support
- Yaml conversion for bcm dma binding"
* tag 'dmaengine-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (53 commits)
dmaengine: fsl-edma: integrate v3 support
dt-bindings: fsl-dma: fsl-edma: add edma3 compatible string
dmaengine: fsl-edma: move tcd into struct fsl_dma_chan
dmaengine: fsl-edma: refactor chan_name setup and safety
dmaengine: fsl-edma: move clearing of register interrupt into setup_irq function
dmaengine: fsl-edma: refactor using devm_clk_get_enabled
dmaengine: fsl-edma: simply ATTR_DSIZE and ATTR_SSIZE by using ffs()
dmaengine: fsl-edma: move common IRQ handler to common.c
dmaengine: fsl-edma: Remove enum edma_version
dmaengine: fsl-edma: transition from bool fields to bitmask flags in drvdata
dmaengine: fsl-edma: clean up EXPORT_SYMBOL_GPL in fsl-edma-common.c
dmaengine: fsl-edma: fix build error when arch is s390
dmaengine: idxd: Fix issues with PRS disable sysfs knob
dmaengine: idxd: Allow ATS disable update only for configurable devices
dmaengine: xilinx_dma: Program interrupt delay timeout
dmaengine: xilinx_dma: Use tasklet_hi_schedule for timing critical usecase
dmaengine: xilinx_dma: Freeup active list based on descriptor completion bit
dmaengine: xilinx_dma: Increase AXI DMA transaction segment count
dmaengine: xilinx_dma: Pass AXI4-Stream control words to dma client
dt-bindings: dmaengine: xilinx_dma: Add xlnx,irq-delay property
...
Add an optional AXI DMA property 'xlnx,irq-delay'. It specifies interrupt
timeout value and causes the DMA engine to generate an interrupt after the
delay time period has expired. Timer begins counting at the end of a packet
and resets with receipt of a new packet or a timeout event occurs.
This property is useful when AXI DMA is connected to the streaming IP i.e
axiethernet where inter packet latency is critical while still taking the
benefit of interrupt coalescing.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1691387509-2113129-3-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add new compatible for BAM DMA engine version v1.7.4 which is
found on Qualcomm SM6115 and QCM2290 SoCs. Since its very similar
to v1.7.0 used on SM8150 like SoCs, mark the comptible scheme
accordingly.
While at it, also update qcom,bam-dma bindings to add comments
which describe the BAM DMA versions used in SM8150 and SM8250 SoCs.
This provides an easy reference for identifying the actual BAM DMA
version available on Qualcomm SoCs.
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20230630082230.2264698-2-bhupesh.sharma@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Extend the DMA40 bindings so that we can pass two SRAM
segments as phandles instead of directly referring to the
memory address in the second reg cell. This enables more
granular control over the SRAM, and adds the optiona LCLA
SRAM segment as well.
Deprecate the old way of passing LCPA as a second reg cell,
make sram compulsory.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230417-ux500-dma40-cleanup-v3-1-60bfa6785968@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull dmaengine updates from Vinod Koul:
"A new driver, couple of device support and binding conversion along
with bunch of driver updates are the main features of this.
New hardware support:
- TI AM62Ax controller support
- Xilinx xdma driver
- Qualcomm SM6125, SM8550, QDU1000/QRU1000 GPI controller
Updates:
- Runtime pm support for at_xdmac driver
- IMX sdma binding conversion to yaml and HDMI audio support
- IMX mxs binding conversion to yaml"
* tag 'dmaengine-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits)
dmaengine: idma64: Update bytes_transferred field
dmaengine: imx-sdma: Set DMA channel to be private
dmaengine: dw: Move check for paused channel to dwc_get_residue()
dmaengine: ptdma: check for null desc before calling pt_cmd_callback
dmaengine: dw-axi-dmac: Do not dereference NULL structure
dmaengine: idxd: Fix default allowed read buffers value in group
dmaengine: sf-pdma: pdma_desc memory leak fix
dmaengine: Simplify dmaenginem_async_device_register() function
dmaengine: use sysfs_emit() to instead of scnprintf()
dmaengine: Make an order in struct dma_device definition
dt-bindings: dma: cleanup examples - indentation, lowercase hex
dt-bindings: dma: drop unneeded quotes
dmaengine: xilinx: xdma: Add user logic interrupt support
dmaengine: xilinx: xdma: Add xilinx xdma driver
dmaengine: drivers: Use devm_platform_ioremap_resource()
dmaengine: at_xdmac: remove empty line
dmaengine: at_xdmac: add runtime pm support
dmaengine: at_xdmac: align properly function members
dmaengine: ppc4xx: Convert to use sysfs_emit()/sysfs_emit_at() APIs
dmaengine: sun6i: Set the maximum segment size
...
Convert the i.MX SDMA binding to DT schema format using json-schema.
The compatibles fsl,imx31-to1-sdma, fsl,imx31-to2-sdma, fsl,imx35-to1-sdma
and fsl,imx35-to2-sdma are not used. So need to delete it. The compatibles
fsl,imx50-sdma, fsl,imx6sll-sdma and fsl,imx6sl-sdma are added. The
original binding don't list all compatible used.
In addition, add new peripheral types HDMI Audio.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221115093823.2879128-2-joy.zou@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
AM62A SoC has a dedicated BCDMA that serves Camera Serial Interface
(CSI) IP. Add new compatible for the same. Unlike system
BCDMA, this instance only has RX DMA channels and lack TX or block copy
channel. Thus make those properties optional. Additionally CSI RX has
independent power domain, add the binding for the same.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20221213164304.1126945-2-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Convert the MXS DMA binding to DT schema format using json-schema.
Drop "interrupt-names" property, since it is broken. The drivers/dma/mxs-dma.c
in Linux kernel does not use it, the property contains duplicate array entries
in existing DTs, and even malformed entries (gmpi, should have been gpmi). Get
rid of that optional property altogether.
Update example node names to be standard dma-controller@ ,
add global interrupt-parent property into example.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221219093713.328776-1-marex@denx.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull more devicetree updates from Rob Herring:
"This is mostly a treewide clean-up from Krzysztof. There's also a
couple of fixes and things that fell thru the cracks.
I must say this has been a nice merge window without bindings dumped
in at the last minute introducing warnings.
Summary:
- Treewide dropping of redundant 'binding' or 'schema' from schema
titles. This will be followed up with a automated check to catch
these.
- Re-sort vendor-prefies
- Convert GPIO based watchdog to schema
- Handle all the variations for clocks, resets, power domains in i.MX
PCIe binding
- Document missing 'power-domains' property in mxsfb
- Fix error with path references in Tegra XUSB example
- Honor CONFIG_CMDLINE* even without /chosen node"
* tag 'devicetree-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: drop redundant part of title (manual)
dt-bindings: clock: drop redundant part of title
dt-bindings: drop redundant part of title (beginning)
dt-bindings: drop redundant part of title (end, part three)
dt-bindings: drop redundant part of title (end, part two)
dt-bindings: drop redundant part of title (end)
dt-bindings: clock: st,stm32mp1-rcc: add proper title
dt-bindings: memory-controllers: ti,gpmc-child: drop redundant part of title
dt-bindings: drop redundant part of title of shared bindings
dt-bindings: watchdog: gpio: Convert bindings to YAML
dt-bindings: imx6q-pcie: Handle more resets on legacy platforms
dt-bindings: imx6q-pcie: Handle various PD configurations
dt-bindings: imx6q-pcie: Handle various clock configurations
dt-bindings: hwmon: ntc-thermistor: drop Naveen Krishna Chatradhi from maintainers
dt-bindings: mxsfb: Document i.MX8M/i.MX6SX/i.MX6SL power-domains property
dt-bindings: vendor-prefixes: sort entries alphabetically
dt-bindings: usb: tegra-xusb: Remove path references
of: fdt: Honor CONFIG_CMDLINE* even without /chosen node
