Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
of tiny changes and forward progress to support new hardware and
better support for existing devices. Included in here are:
- Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
people start to use the hardware
- default USB authentication mode Kconfig and documentation update to
make it more obvious what is going on
- USB typec updates and enhancements
- usual dwc3 driver updates
- usual xhci driver updates
- function USB (i.e. gadget) driver updates and additions
- new device ids for lots of drivers
- loads of other small updates, full details in the shortlog
All of these, including a "last minute regression fix" have been in
linux-next with no reported issues"
* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
phy: tegra: xusb: Add API to retrieve the port number of phy
USB: gadget: pxa27x_udc: Remove unused of_gpio.h
usb: gadget/snps_udc_plat: Remove unused of_gpio.h
usb: ohci-pxa27x: Remove unused of_gpio.h
usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
usb: Clarify expected behavior of dev_bin_attrs_are_visible()
xhci: Allow RPM on the USB controller (1022:43f7) by default
usb: isp1760: remove SLAB_MEM_SPREAD flag usage
usb: misc: onboard_hub: use pointer consistently in the probe function
usb: gadget: fsl: Increase size of name buffer for endpoints
usb: gadget: fsl: Add of device table to enable module autoloading
usb: typec: tcpm: add support to set tcpc connector orientatition
usb: typec: tcpci: add generic tcpci fallback compatible
dt-bindings: usb: typec-tcpci: add tcpci fallback binding
usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
usb: core: Set connect_type of ports based on DT node
dt-bindings: usb: Add downstream facing ports to realtek binding
...
Pull devicetree updates from Rob Herring:
"DT core:
- Add cleanup.h based auto release of struct device_node pointers via
__free marking and new for_each_child_of_node_scoped() iterator to
use it.
- Always create a base skeleton DT when CONFIG_OF is enabled. This
supports several usecases of adding DT data on non-DT booted
systems.
- Move around some /reserved-memory code in preparation for further
improvements
- Add a stub for_each_property_of_node() for !OF
- Adjust the printk levels on some messages
- Fix __be32 sparse warning
- Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
(currently orphaned)
- Add Saravana Kannan and drop Frank Rowand as DT maintainers
DT bindings:
- Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
xlnx,sd-fec to DT schemas
- Add existing, but undocumented fsl,imx-anatop binding
- Add bunch of undocumented vendor prefixes used in compatible
strings
- Drop obsolete brcm,bcm2835-pm-wdt binding
- Drop obsolete i2c.txt which as been replaced with schema in
dtschema
- Add DPS310 device and sort trivial-devices.yaml
- Enable undocumented compatible checks on DT binding examples
- More QCom maintainer fixes/updates
- Updates to writing-schema.rst and DT submitting-patches.rst to
cover some frequent review comments
- Clean-up SPDX tags to use 'OR' rather than 'or'"
* tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
of: unittest: Use for_each_child_of_node_scoped()
of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
of: Add cleanup.h based auto release via __free(device_node) markings
of: Move all FDT reserved-memory handling into of_reserved_mem.c
of: Add KUnit test to confirm DTB is loaded
of: unittest: treat missing of_root as error instead of fixing up
x86/of: Unconditionally call unflatten_and_copy_device_tree()
um: Unconditionally call unflatten_device_tree()
of: Create of_root if no dtb provided by firmware
of: Always unflatten in unflatten_and_copy_device_tree()
dt-bindings: timer: mediatek: Convert to json-schema
dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support
soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage
dt-bindings: fsl-imx-sdma: fix HDMI audio index
dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6
dt-bindings: soc: imx: fsl,imx-anatop: add binding
dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML
dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
of: make for_each_property_of_node() available to to !OF
...
Pull pmdomain updates from Ulf Hansson:
"Core:
- Log a message when unused PM domains gets disabled
- Scale down parent/child performance states in the reverse order
Providers:
- qcom: rpmpd: Add power domains support for MSM8974, MSM8974PRO,
PMA8084 and PM8841
- renesas: rcar-gen4-sysc: Reduce atomic delays
- renesas: rcar-sysc: Adjust the waiting time to cover the worst case
- renesas: r8a779h0-sysc: Add support for the r8a779h0 PM domains
- imx: imx8mp-blk-ctrl: Add the fdcc clock to the hdmimix domains
- imx: imx8mp-blk-ctrl: Error out if domains are missing in DT
Improve support for multiple PM domains:
- Add two helper functions to attach/detach multiple PM domains
- Convert a couple of drivers to use the new helper functions"
* tag 'pmdomain-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (22 commits)
pmdomain: renesas: rcar-gen4-sysc: Reduce atomic delays
pmdomain: renesas: Adjust the waiting time to cover the worst case
pmdomain: qcom: rpmpd: Add MSM8974PRO+PMA8084 power domains
pmdomain: qcom: rpmpd: Add MSM8974+PM8841 power domains
pmdomain: core: constify of_phandle_args in add device and subdomain
pmdomain: core: constify of_phandle_args in xlate
media: venus: Convert to dev_pm_domain_attach|detach_list() for vcodec
remoteproc: qcom_q6v5_adsp: Convert to dev_pm_domain_attach|detach_list()
remoteproc: imx_rproc: Convert to dev_pm_domain_attach|detach_list()
remoteproc: imx_dsp_rproc: Convert to dev_pm_domain_attach|detach_list()
PM: domains: Add helper functions to attach/detach multiple PM domains
pmdomain: imx8mp-blk-ctrl: imx8mp_blk: Add fdcc clock to hdmimix domain
pmdomain: mediatek: Use devm_platform_ioremap_resource() in init_scp()
pmdomain: renesas: r8a779h0-sysc: Add r8a779h0 support
pmdomain: imx8mp-blk-ctrl: Error out if domains are missing in DT
pmdomain: ti: Add a null pointer check to the omap_prm_domain_init
pmdomain: renesas: rcar-gen4-sysc: Remove unneeded includes
pmdomain: core: Print a message when unused power domains are disabled
pmdomain: qcom: rpmpd: Keep one RPM handle for all RPMPDs
pmdomain: core: Scale down parent/child performance states in reverse order
...
Pull ARM SoC driver updates from Arnd Bergmann:
"This is the usual mix of updates for drivers that are used on (mostly
ARM) SoCs with no other top-level subsystem tree, including:
- The SCMI firmware subsystem gains support for version 3.2 of the
specification and updates to the notification code
- Feature updates for Tegra and Qualcomm platforms for added hardware
support
- A number of platforms get soc_device additions for identifying
newly added chips from Renesas, Qualcomm, Mediatek and Google
- Trivial improvements for firmware and memory drivers amongst
others, in particular 'const' annotations throughout multiple
subsystems"
* tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
tee: make tee_bus_type const
soc: qcom: aoss: add missing kerneldoc for qmp members
soc: qcom: geni-se: drop unused kerneldoc struct geni_wrapper param
soc: qcom: spm: fix building with CONFIG_REGULATOR=n
bus: ti-sysc: constify the struct device_type usage
memory: stm32-fmc2-ebi: keep power domain on
memory: stm32-fmc2-ebi: add MP25 RIF support
memory: stm32-fmc2-ebi: add MP25 support
memory: stm32-fmc2-ebi: check regmap_read return value
dt-bindings: memory-controller: st,stm32: add MP25 support
dt-bindings: bus: imx-weim: convert to YAML
watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
MAINTAINERS: Update SCMI entry with HWMON driver
MAINTAINERS: samsung: gs101: match patches touching Google Tensor SoC
memory: tegra: Fix indentation
memory: tegra: Add BPMP and ICC info for DLA clients
memory: tegra: Correct DLA client names
dt-bindings: memory: renesas,rpc-if: Document R-Car V4M support
firmware: arm_scmi: Update the supported clock protocol version
...
dt-binding additions for some syscons (rk3588 usb3, hdptxphy) and a
clock addition to the rk3588 VO syscon binding.
6#
* tag 'v6.9-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
dt-bindings: soc: rockchip: add rk3588 USB3 syscon
dt-bindings: soc: rockchip: add clock to RK3588 VO grf
dt-bindings: soc: rockchip: Add rk3588 hdptxphy syscon
Link: https://lore.kernel.org/r/5997473.alqRGMn8q6@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm driver updates for v6.9
This introduces the Qualcomm Programmable Boot Sequencer (PBS) driver.
The Qualcomm SMEM no longer acquires the hwspinlock during the "get"
operation, to improve the system behavior during the recovery of a
remoteproc that crashed with the hwspinlock held.
The Qualcomm Always On Subsystem (AOSS) message protocol driver gains
tracepoints, printf annotation, and a debugfs interface is introduced
for tweaking system properties during development and debugging.
The Qualcomm socinfo driver gains data for SM8475, QCM8550 and
QCS8550 platforms, and the PM2250 is renamed to PM4125.
Support for controlling the voltage regulator in SPM/SAW2 is introduced.
The gfx.lvl power-domain is dropped for SA8540P, as this resource was
incorrectly inherited from SC8280XP.
Additionally some code cleanup improvements is introduced across APR,
LLCC, SMP2P and SPM.
* tag 'qcom-drivers-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits)
dt-bindings: soc: qcom: qcom,saw2: add msm8226 l2 compatible
soc: qcom: spm: add support for voltage regulator
soc: qcom: spm: remove driver-internal structures from the driver API
dt-bindings: soc: qcom: qcom,saw2: define optional regulator node
dt-bindings: soc: qcom: qcom,saw2: add missing compatible strings
dt-bindings: soc: qcom: merge qcom,saw2.txt into qcom,spm.yaml
soc: qcom: llcc: Check return value on Broadcast_OR reg read
soc: qcom: socinfo: Add Soc IDs for SM8475 family
dt-bindings: arm: qcom,ids: Add IDs for SM8475 family
soc: qcom: apr: make aprbus const
dt-bindings: soc: qcom: qcom,pmic-glink: document X1E80100 compatible
soc: qcom: add QCOM PBS driver
dt-bindings: soc: qcom: Add qcom,pbs bindings
pmdomain: qcom: rpmhpd: Drop SA8540P gfx.lvl
soc: qcom: socinfo: rename PM2250 to PM4125
soc: qcom: aoss: Add tracepoints in qmp_send()
soc: qcom: socinfo: add SoC Info support for QCM8550 and QCS8550 platform
dt-bindings: arm: qcom,ids: add SoC ID for QCM8550 and QCS8550
soc: qcom: aoss: Add debugfs interface for sending messages
soc: qcom: smem: remove hwspinlock from item get routine
...
Link: https://lore.kernel.org/r/20240225030612.480241-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Qualcomm SPM / SAW2 device is described in two bindigns files:
arm/msm/qcom,saw2.txt and soc/qcom/qcom,spm.yaml. Merge the former into
the latter, adding detailed device node description. While we are at it,
also rename qcom,spm.yaml to qcom,saw2.yaml to follow the actual
compatible used for these devices.
The regulator property is retained as is. It will be changed in the
later patches.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-1-0472ec237f49@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Per guidance from the NXP downstream kernel, if the clock is
disabled before HDMI/LCDIF probe, LCDIF will not get pixel
clock from HDMI PHY and throw an error:
[CRTC:39:crtc-2] vblank wait timed out
WARNING: CPU: 2 PID: 9 at drivers/gpu/drm/drm_atomic_helper.c:
1634 drm_atomic_helper_wait_for_vblanks.part.0+0x23c/0x260
Fix this by adding the fdcc clock to the hdmi_blk_ctrl. This
should be safe, since neither this power domain nor the dependent
HDMI and LCDIF drivers been enabled or added to the SoC device
tree yet.
According to Sandor Yu from NXP, "the FDCC clock is not for HDMITX
in desgin, but it is part of HDMI domain that needed by HDMITX.
So I think it is reasonable added it to the power domain driver."
The driver also supports two power domains which are missing from the binding
that also fix an issue with resuming from suspend.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240203165307.7806-4-aford173@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When DT overlay is applied at run time compatible string or model AFAIK is
not updated. But when fdtoverlay tool is used it actually creates full
description for used SOM and carrier card(CC). That's why there is no
reason to use generic SOM name and its compatible strings because they are
not properly reflected in newly created DT.
Composing dt overlays together was introduced by commit 7a4c31ee87
("arm64: zynqmp: Add support for Xilinx Kria SOM board") and later renamed
by commit 45fe0dc4ea ("arm64: xilinx: Use zynqmp prefix for SOM dt
overlays").
DTB selection is done prior booting OS that's why there is no need to do
run time composition for SOM and CC combination. And user space can use
compatible string and all listed revisions to figured it out which SOM and
CC combinations OS is running at.
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/14c184225cc4f0a61da5f8c98bc0767f8deba0df.1706019781.git.michal.simek@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Pull SoC driver updates from Arnd Bergmann:
"A new drivers/cache/ subsystem is added to contain drivers for
abstracting cache flush methods on riscv and potentially others, as
this is needed for handling non-coherent DMA but several SoCs require
nonstandard hardware methods for it.
op-tee gains support for asynchronous notification with FF-A, as well
as support for a system thread for executing in secure world.
The tee, reset, bus, memory and scmi subsystems have a couple of minor
updates.
Platform specific soc driver changes include:
- Samsung Exynos gains driver support for Google GS101 (Tensor G1)
across multiple subsystems
- Qualcomm Snapdragon gains support for SM8650 and X1E along with
added features for some other SoCs
- Mediatek adds support for "Smart Voltage Scaling" on MT8186 and
MT8195, and driver support for MT8188 along with some code
refactoring.
- Microchip Polarfire FPGA support for "Auto Update" of the FPGA
bitstream
- Apple M1 mailbox driver is rewritten into a SoC driver
- minor updates on amlogic, mvebu, ti, zynq, imx, renesas and
hisilicon"
* tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
memory: ti-emif-pm: Convert to platform remove callback returning void
memory: ti-aemif: Convert to platform remove callback returning void
memory: tegra210-emc: Convert to platform remove callback returning void
memory: tegra186-emc: Convert to platform remove callback returning void
memory: stm32-fmc2-ebi: Convert to platform remove callback returning void
memory: exynos5422-dmc: Convert to platform remove callback returning void
memory: renesas-rpc-if: Convert to platform remove callback returning void
memory: omap-gpmc: Convert to platform remove callback returning void
memory: mtk-smi: Convert to platform remove callback returning void
memory: jz4780-nemc: Convert to platform remove callback returning void
memory: fsl_ifc: Convert to platform remove callback returning void
memory: fsl-corenet-cf: Convert to platform remove callback returning void
memory: emif: Convert to platform remove callback returning void
memory: brcmstb_memc: Convert to platform remove callback returning void
memory: brcmstb_dpfe: Convert to platform remove callback returning void
soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset
firmware: qcom: qseecom: fix memory leaks in error paths
dt-bindings: clock: google,gs101: rename CMU_TOP gate defines
soc: qcom: llcc: Fix typo in kernel-doc
dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel
...
Pull SoC DT updates from Arnd Bergmann:
"There is one new SoC for each 32-bit Arm and 64-bit RISC-V, but both
the Rockchips rv1109 and Sopgho CV1812H are just minor variations of
already supported chips.
The other six new SoCs are all part of existing arm64 families, but
are somewhat more interesting:
- Samsung ExynosAutov920 is an automotive chip, and the first one we
support based on the Cortex-A78AE core with lockstep mode.
- Google gs101 (Tensor G1) is the chip used in a number of Pixel
phones, and is grouped with Samsung Exynos here since it is based
on the same SoC design, sharing most of its IP blocks with that
series.
- MediaTek MT8188 is a new chip used for mid-range tablets and
Chromebooks, using two Cortex-A78 cores where the older MT8195 had
four of them.
- Qualcomm SM8650 (Snapdragon 8 Gen 3) is their current top range
phone SoC and the first supported chip based on Cortex-X4,
Cortex-A720 and Cortex-A520.
- Qualcomm X1E80100 (Snapdragon X Elite) in turn is the latest Laptop
chip using the custom Oryon cores.
- Unisoc UMS9620 (Tanggula 7 series) is a 5G phone SoC based on
Cortex-A76 and Cortex-A55
In terms of boards, we have
- Five old Microsoft Lumia phones, the HTC One Mini 2, Motorola Moto
G 4G, and Huawei Honor 5X/GR5, all based on Snapdragon SoCs.
- Multiple Rockchips mobile gaming systems (Anbernic RG351V, Powkiddy
RK2023, Powkiddy X55) along with the Sonoff iHost Smart Home Hub
and a few Rockchips SBCs
- Some ComXpress boards based on Marvell CN913x, which is the
follow-up to Armada 7xxx/8xxx.
- Six new industrial/embedded boards based on NXP i.MX8 and i.MX9
- Mediatek MT8183 based Chromebooks from Lenovo, Asus and Acer.
- Toradex Verdin AM62 Mallow carrier for TI AM62
- Huashan Pi board based on the SophGo CV1812H RISC-V chip
- Two boards based on Allwinner H616/H618
- A number of reference boards for various added SoCs from Qualcomm,
Mediatek, Google, Samsung, NXP and Spreadtrum
As usual, there are cleanups and warning fixes across all platforms as
well as added features for several of them"
* tag 'soc-dt-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (857 commits)
ARM: dts: usr8200: Fix phy registers
arm64: dts: intel: minor whitespace cleanup around '='
arm64: dts: socfpga: agilex: drop redundant status
arm64: dts: socfpga: agilex: add unit address to soc node
arm64: dts: socfpga: agilex: move firmware out of soc node
arm64: dts: socfpga: agilex: move FPGA region out of soc node
arm64: dts: socfpga: agilex: align pin-controller name with bindings
arm64: dts: socfpga: stratix10_swvp: drop unsupported DW MSHC properties
arm64: dts: socfpga: stratix10_socdk: align NAND chip name with bindings
arm64: dts: socfpga: stratix10: add unit address to soc node
arm64: dts: socfpga: stratix10: move firmware out of soc node
arm64: dts: socfpga: stratix10: move FPGA region out of soc node
arm64: dts: socfpga: stratix10: align pincfg nodes with bindings
arm64: dts: socfpga: stratix10: add clock-names to DWC2 USB
arm64: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size
ARM: dts: socfpga: align NAND controller name with bindings
ARM: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size
arm64: dts: rockchip: Fix led pinctrl of lubancat 1
arm64: dts: rockchip: correct gpio_pwrctrl1 typo on nanopc-t6
arm64: dts: rockchip: correct gpio_pwrctrl1 typo on rock-5b
...
One new boards, the CoolPi CM5 SoM and 4B SBC. Basic node for the rk3588
display controller and a bunch of small improvements for different boards,
* tag 'v6.8-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (21 commits)
arm64: dts: rockchip: Fix led pinctrl of lubancat 1
arm64: dts: rockchip: correct gpio_pwrctrl1 typo on nanopc-t6
arm64: dts: rockchip: correct gpio_pwrctrl1 typo on rock-5b
arm64: dts: rockchip: support poweroff on the rock-5b
arm64: dts: rockchip: Support poweroff on Orange Pi 5
arm64: dts: rockchip: nanopc-t6 sdmmc beautification
arm64: dts: rockchip: Fix rk3588 USB power-domain clocks
arm64: dts: rockchip: configure eth pad driver strength for orangepi r1 plus lts
arm64: dts: rockchip: Support poweroff on NanoPC-T6
arm64: dts: rockchip: rk3308-rock-pi-s gpio-line-names cleanup
arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB
dt-bindings: arm: rockchip: Add Cool Pi CM5
arm64: dts: rockchip: Add support for rk3588s based board Cool Pi 4B
dt-bindings: arm: rockchip: Add Cool Pi 4B
dt-bindings: vendor-prefixes: Add Cool Pi
arm64: dts: rockchip: add gpio-line-names to rk3328-rock-pi-e
arm64: dts: rockchip: make use gpio-keys for buttons on puma-haikou
arm64: dts: rockchip: expose BIOS Disable feedback pin on rk3399-puma
arm64: dts: rockchip: fix misleading comment in rk3399-puma-haikou.dts
arm64: dts: rockchip: Add vop on rk3588
...
Link: https://lore.kernel.org/r/3711719.VqM8IeB0Os@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
RISC-V SoC drivers for v6.8
There's only one set of changes here, the addition of "Auto Update"
support for PolarFire SoC. Auto Update is one of the ways that the FPGA
bitstream can be updated, and the only one suitable for use from Linux
as it does not immediately initiate a reboot when started.
The driver was not accepted in the FPGA manager subsystem as the update
only occurs after a reboot and makes no use of the FPGA manager
framework.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-drivers-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
MAINTAINERS: add auto-update driver to mpfs entry
firmware: microchip: Replace of_device.h with explicit include
firmware: microchip: add PolarFire SoC Auto Update support
soc: microchip: mpfs: add auto-update subdev to system controller
soc: microchip: mpfs: print service status in warning message
soc: microchip: mpfs: enable access to the system controller's flash
dt-bindings: soc: microchip: add a property for system controller flash
firmware_loader: Expand Firmware upload error codes with firmware invalid error
Link: https://lore.kernel.org/r/20231221-droop-unblock-81e4fe14acee@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung SoC driver changes for v6.8
1. Add support for Google GS101 SoC to different drivers: clock
controller, serial and watchdog.
The clock driver changes depend on few bindings headers, which I put
in a topic branch with the bindings refactoring and GS101 support,
therefore this this pull request includes that bindings topic branch.
The rest of the bindings topic branch is not necessary here, however
keeping everything together makes it easier to share between
branches. The bindings topic branch is mostly refactoring all the
compatibles to add SoC-specific compatible followed by fallback.
2. Exynos ChipID: recognize ExynosAutov920.
* tag 'samsung-drivers-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (40 commits)
dt-bindings: clock: google,gs101: rename CMU_TOP gate defines
watchdog: s3c2410_wdt: Add support for Google gs101 SoC
watchdog: s3c2410_wdt: Update QUIRK macros to use BIT macro
watchdog: s3c2410_wdt: Add support for WTCON register DBGACK_MASK bit
tty: serial: samsung: Add gs101 compatible and common fifoszdt_serial_drv_data
clk: samsung: clk-gs101: Add cmu_top, cmu_misc and cmu_apm support
clk: samsung: clk-pll: Add support for pll_{0516,0517,518}
dt-bindings: clock: google,gs101: fix incorrect numbering and DGB suffix
dt-bindings: soc: samsung: usi: add google,gs101-usi compatible
dt-bindings: serial: samsung: Make samsung,uart-fifosize a required property
dt-bindings: serial: samsung: Add google-gs101-uart compatible
dt-bindings: watchdog: Document Google gs101 watchdog bindings
dt-bindings: samsung: exynos-sysreg: combine exynosautov920 with other enum
dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101
dt-bindings: clock: Add Google gs101 clock management unit bindings
dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible
dt-bindings: watchdog: samsung: add specific compatible for Tesla FSD
dt-bindings: samsung: exynos-pmu: add specific compatible for Tesla FSD
dt-bindings: serial: samsung: add specific compatible for Tesla FSD
dt-bindings: pwm: samsung: add specific compatible for Tesla FSD
...
Link: https://lore.kernel.org/r/20231220084722.22149-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
arm64: ZynqMP DT changes for 6.8
- Fix overlay rules to remove KR260 targets
- Move ethernet phys to mdio node
- Fix couple of issues reported by W=1
- Do not use _ in node names
- Use lowercase in register address
- Remove address/size-cells from nodes without child
- Moved fixed clock to root on KV260
- Fix issues reported by dt-schema
- additional compatible string for qspi on SOM
- Move arm/xilinx.yaml to soc vendor to cover also other archs
- Describe new Microblaze V qemu platform
- Add missing mailbox destination compatible string
* tag 'zynqmp-dt-for-6.8' of https://github.com/Xilinx/linux-xlnx:
arm64: zynqmp: Add missing destination mailbox compatible
arm64: zynqmp: Fix clock node name in kv260 cards
arm64: zynqmp: Move fixed clock to / for kv260
dt-bindings: soc: Add new board description for MicroBlaze V
dt-bindings: soc: xilinx: Move xilinx.yaml from arm to soc
arm64: xilinx: Remove address/size-cells from gem nodes
arm64: xilinx: Remove address/size-cells from flash node
arm64: xilinx: Put ethernet phys to mdio node
arm64: xilinx: Remove mt25qu512a compatible string from SOM
arm64: xilinx: Use lower case for partition address
arm64: xilinx: Do not use '_' in DT node names
arm64: dts: xilinx: Apply overlays to base dtbs
Link: https://lore.kernel.org/r/CAHTX3dLyA1Y9guLKSNJTChFVvkspMfTa0odULyAdcuFUSiSH3A@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
MicroBlaze V is new AMD/Xilinx soft-core 32bit RISC-V processor IP.
It is hardware compatible with classic MicroBlaze processor. Processor can
be used with standard AMD/Xilinx IPs including interrupt controller and
timer.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michal Simek <michal.simek@amd.com>
All Xilinx boards can hosts also soft core CPUs like MicroBlaze or
MicroBlaze V (RISC-V ISA) that's why move boards description from arm
folder to soc folder.
Similar change was done for Renesas by commit c27ce08b80 ("dt-bindings:
soc: renesas: Move renesas.yaml from arm to soc").
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michal Simek <michal.simek@amd.com>
