Currently the dtbs_check for imx6ul generates warnings like this:
['fsl,imx6ul-gpt', 'fsl,imx6sx-gpt'] is too long
According to the timer-imx-gpt driver all imx6 use the same imx6dl data,
but according to the existing DTS files the imx6ul GPT IP is derived from
imx6sx. So better follow the DTS files here and make the imx6ul GPT
compatible to the imx6sl one to fix the warning.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230530100843.15072-3-stefan.wahren@i2se.com
Signed-off-by: Rob Herring <robh@kernel.org>
Currently the dtbs_check for imx6 generates warnings like this:
'fsl,imx6sl-dcp' is not one of ['fsl,imx23-dcp', 'fsl,imx28-dcp']
['fsl,imx6sl-dcp', 'fsl,imx28-dcp'] is too long
or
'fsl,imx6ull-dcp' is not one of ['fsl,imx23-dcp', 'fsl,imx28-dcp']
['fsl,imx6ull-dcp', 'fsl,imx28-dcp'] is too long
So add them to the devicetree binding.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230530100843.15072-2-stefan.wahren@i2se.com
Signed-off-by: Rob Herring <robh@kernel.org>
Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes this time are for the Qualcomm Snapdragon
platforms.
There are bug fixes for error handling in Qualcomm icc-bwmon,
rpmh-rsc, ramp_controller and rmtfs driver as well as the AMD tee
firmware driver and a missing initialization in the Arm ff-a firmware
driver. The Qualcomm RPMh and EDAC drivers need some rework to work
correctly on all supported chips.
The DT fixes include:
- i.MX8 fixes for gpio, pinmux and clock settings
- ADS touchscreen gpio polarity settings in several machines
- Address dtb warnings for caches, panel and input-enable properties
on Qualcomm platforms
- Incorrect data on qualcomm platforms fir SA8155P power domains,
SM8550 LLCC, SC7180-lite SDRAM frequencies and SM8550 soundwire
- Remoteproc firmware paths are corrected for Sony Xperia 10 IV"
* tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
firmware: arm_ffa: Set handle field to zero in memory descriptor
ARM: dts: Fix erroneous ADS touchscreen polarities
arm64: dts: imx8mn-beacon: Fix SPI CS pinmux
arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals
EDAC/qcom: Get rid of hardcoded register offsets
EDAC/qcom: Remove superfluous return variable assignment in qcom_llcc_core_setup()
arm64: dts: qcom: sm8550: Use the correct LLCC register scheme
dt-bindings: cache: qcom,llcc: Fix SM8550 description
arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards
arm64: dts: qcom: sm8550: use uint16 for Soundwire interval
soc: qcom: rpmhpd: Add SA8155P power domains
arm64: dts: qcom: Split out SA8155P and use correct RPMh power domains
dt-bindings: power: qcom,rpmpd: Add SA8155P
soc: qcom: Rename ice to qcom_ice to avoid module name conflict
soc: qcom: rmtfs: Fix error code in probe()
soc: qcom: ramp_controller: Fix an error handling path in qcom_ramp_controller_probe()
ARM: dts: at91: sama7g5ek: fix debounce delay property for shdwc
ARM: at91: pm: fix imbalanced reference counter for ethernet devices
arm64: dts: qcom: sm6375-pdx225: Fix remoteproc firmware paths
...
Qualcomm pinctrl Devicetree bindings changes for v6.5
Simplify remaining bindings with usage of unevaluatedProperties. This
will have the same functional effect with less code.
rk3588-saradc isn't compatible with the rk3399-saradc variant,
hence, fix the following dtbs_check warning for 'oneOf' condition
failure.
DTC_CHK arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtb
/home/shreeya/linux/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtb:
saradc@fec10000: compatible: 'oneOf' conditional failed,
one must be fixed:
['rockchip,rk3588-saradc'] is too short
'rockchip,saradc' was expected
'rockchip,rk3066-tsadc' was expected
'rockchip,rk3399-saradc' was expected
Fixes: 2daf2ae979 ("dt-bindings: iio: adc: Add rockchip,rk3588-saradc string")
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230610143601.173307-1-shreeya.patel@collabora.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Core:
- Add Marijn Suijten as drm/msm reviewer
- Adreno A660 bindings
- SM8350 MDSS bindings fix
DP:
- Removed obsolete USB-PD remains
- Documented DP compatible string for sm8550 platform
DPU:
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x, sc8280xp, sm8450
- Enabled writeback on sc7280
- Enabled DSC on msm8998
- Native HDMI output support
- Dropped unused features: regdma, GC, IGC
- Fixed the DSC flush operations
- Simplified QoS handling, removing obsolete and unused features and merging
SSPP and WB code paths
- Reworked dpu_encoder initialisation path
DSI:
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Dropped powerup quirks in favour of using pre_enable_prev_first for
downstream bridges
- Fixed 14nm DSI PHY programming
MDP5:
- Added support for display controller on MSM8226 platform
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
On PM8941 pon doesn't store the reset reason. However we still need the
wrapping node for pwrkey and resin nodes. Add bindings for pm8941-pon
device.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
It's supposed to be there and it's needed for proper validation of DTS
files.
This fixes following errors for Northstar based TP-Link routers:
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dtb: flash@0: partitions: 'oneOf' conditional failed, one must be fixed:
'partition-file-system', 'partition-os-image', 'partitions-table-offset' do not match any of the regexes: 'pinctrl-[0-9]+'
'#address-cells' is a required property
'#size-cells' is a required property
'partition-file-system', 'partition-os-image', 'partitions-table-offset' do not match any of the regexes: '^partition@[0-9a-f]+$', 'pinctrl-[0-9]+'
'partition-file-system', 'partition-os-image', 'partitions-table-offset' do not match any of the regexes: '^partition-[0-9a-z]+$', 'pinctrl-[0-9]+'
'fis-index-block' is a required property
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dtb: flash@0: partitions:compatible: 'oneOf' conditional failed, one must be fixed:
['tplink,safeloader-partitions'] is too short
'fixed-partitions' was expected
'sercomm,sc-partitions' was expected
'arm,arm-firmware-suite' was expected
'brcm,bcm4908-partitions' was expected
'brcm,bcm947xx-cfe-partitions' was expected
'linksys,ns-partitions' was expected
'qcom,smem-part' was expected
'redboot-fis' was expected
From schema: Documentation/devicetree/bindings/mtd/mtd.yaml
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dtb: flash@0: partitions: Unevaluated properties are not allowed ('partitions-table-offset' was unexpected)
From schema: Documentation/devicetree/bindings/mtd/mtd.yaml
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dtb: flash@0: partitions: 'oneOf' conditional failed, one must be fixed:
'partition-file-system', 'partition-os-image', 'partitions-table-offset' do not match any of the regexes: 'pinctrl-[0-9]+'
'#address-cells' is a required property
'#size-cells' is a required property
'partition-file-system', 'partition-os-image', 'partitions-table-offset' do not match any of the regexes: '^partition@[0-9a-f]+$', 'pinctrl-[0-9]+'
'partition-file-system', 'partition-os-image', 'partitions-table-offset' do not match any of the regexes: '^partition-[0-9a-z]+$', 'pinctrl-[0-9]+'
'fis-index-block' is a required property
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dtb: flash@0: partitions:compatible: 'oneOf' conditional failed, one must be fixed:
['tplink,safeloader-partitions'] is too short
'fixed-partitions' was expected
'sercomm,sc-partitions' was expected
'arm,arm-firmware-suite' was expected
'brcm,bcm4908-partitions' was expected
'brcm,bcm947xx-cfe-partitions' was expected
'linksys,ns-partitions' was expected
'qcom,smem-part' was expected
'redboot-fis' was expected
From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dtb: flash@0: partitions: Unevaluated properties are not allowed ('partitions-table-offset' was unexpected)
From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dtb: flash@0: Unevaluated properties are not allowed ('partitions' was unexpected)
From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230602215629.2568-1-zajec5@gmail.com
Linux 6.4-rc5
* tag 'v6.4-rc5': (919 commits)
Linux 6.4-rc5
leds: qcom-lpg: Fix PWM period limits
selftests/ftrace: Choose target function for filter test from samples
KVM: selftests: Add test for race in kvm_recalculate_apic_map()
KVM: x86: Bail from kvm_recalculate_phys_map() if x2APIC ID is out-of-bounds
KVM: x86: Account fastpath-only VM-Exits in vCPU stats
KVM: SVM: vNMI pending bit is V_NMI_PENDING_MASK not V_NMI_BLOCKING_MASK
KVM: x86/mmu: Grab memslot for correct address space in NX recovery worker
tpm, tpm_tis: correct tpm_tis_flags enumeration values
Revert "ext4: remove ac->ac_found > sbi->s_mb_min_to_scan dead check in ext4_mb_check_limits"
media: uvcvideo: Don't expose unsupported formats to userspace
media: v4l2-subdev: Fix missing kerneldoc for client_caps
media: staging: media: imx: initialize hs_settle to avoid warning
media: v4l2-mc: Drop subdev check in v4l2_create_fwnode_links_to_pad()
riscv: Implement missing huge_ptep_get
riscv: Fix huge_ptep_set_wrprotect when PTE is a NAPOT
module/decompress: Fix error checking on zstd decompression
fork, vhost: Use CLONE_THREAD to fix freezer/ps regression
dt-bindings: serial: 8250_omap: add rs485-rts-active-high
selinux: don't use make's grouped targets feature yet
...
