The PHY_GET command, supporting both DUMP and GET operations, is used to
retrieve the list of PHYs connected to a netdevice, and get topology
information to know where exactly it sits on the physical link.
Add the netlink specs corresponding to that command.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Symmetric RSS hash functions are beneficial in applications that monitor
both Tx and Rx packets of the same flow (IDS, software firewalls, ..etc).
Getting all traffic of the same flow on the same RX queue results in
higher CPU cache efficiency.
A NIC that supports "symmetric-xor" can achieve this RSS hash symmetry
by XORing the source and destination fields and pass the values to the
RSS hash algorithm.
The user may request RSS hash symmetry for a specific algorithm, via:
# ethtool -X eth0 hfunc <hash_alg> symmetric-xor
or turn symmetry off (asymmetric) by:
# ethtool -X eth0 hfunc <hash_alg>
The specific fields for each flow type should then be specified as usual
via:
# ethtool -N|-U eth0 rx-flow-hash <flow_type> s|d|f|n
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-4-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Revert following commits:
commit acec05fb78 ("net_tstamp: Add TIMESTAMPING SOFTWARE and HARDWARE mask")
commit 11d55be06d ("net: ethtool: Add a command to expose current time stamping layer")
commit bb8645b00c ("netlink: specs: Introduce new netlink command to get current timestamp")
commit d905f9c753 ("net: ethtool: Add a command to list available time stamping layers")
commit aed5004ee7 ("netlink: specs: Introduce new netlink command to list available time stamping layers")
commit 51bdf3165f ("net: Replace hwtstamp_source by timestamping layer")
commit 0f7f463d48 ("net: Change the API of PHY default timestamp to MAC")
commit 091fab1228 ("net: ethtool: ts: Update GET_TS to reply the current selected timestamp")
commit 152c75e1d0 ("net: ethtool: ts: Let the active time stamping layer be selectable")
commit ee60ea6be0 ("netlink: specs: Introduce time stamping set command")
They need more time for reviews.
Link: https://lore.kernel.org/all/20231118183529.6e67100c@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new commands allowing to list available time stamping layers on a
netdevice's link.
Example usage :
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema \
--do ts-list-get \
--json '{"header":{"dev-name":"eth0"}}'
{'header': {'dev-index': 3, 'dev-name': 'eth0'},
'ts-list-layer': b'\x01\x00\x00\x00\x05\x00\x00\x00'}
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new commands allowing to get the current time stamping on a
netdevice's link.
Example usage :
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do ts-get \
--json '{"header":{"dev-name":"eth0"}}'
{'header': {'dev-index': 3, 'dev-name': 'eth0'}, 'ts-layer': 1}
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pad is a separate type. Even though in practice they can
only be a u32 the value should be discarded.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Code gen for stats is a bit of a challenge, but from looking
at the attrs I think that the format isn't quite right.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
UDP tunnel and cable test messages have a lot of nests,
which do not match the names of the enum entries in C uAPI.
Some of the structure / nesting also looks wrong.
Untangle this a little bit based on the names, comments and
educated guesses, I haven't actually tested the results.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
C does not allow defining structures and enums with the same name.
Since enum ethtool_stringset exists in the uAPI we need to include
at least a stub of it in the spec. This will trigger name collision
avoidance in the code gen.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most of the C enum names are guessed correctly, but there
is a handful of corner cases we need to name explicitly.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Things that are not implemented:
- cable tests
- bitmaks in the requests don't work (needs multi-attr support in ynl.py)
- stats-get seems to return nonsense (not passing a bitmask properly?)
- notifications are not tested
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This attribute, which is part of ethtool's ring param configuration
allows the user to specify the maximum number of the packet's payload
that can be written directly to the device.
Example usage:
# ethtool -G [interface] tx-push-buf-len [number of bytes]
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I relicensed Netlink spec code to GPL-2.0 OR BSD-3-Clause but
we still put a slightly different license on the uAPI header
than the rest of the code. Use the Linux-syscall-note on all
the specs and all generated code. It's moot for kernel code,
but should not hurt. This way the licenses match everywhere.
Cc: Chuck Lever <chuck.lever@oracle.com>
Fixes: 37d9df224d ("ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause")
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the codegen rules had been changed we can update
the specs to reflect the new default.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ethtool is one of the most actively developed families.
With the changes to the CLI it should be possible to use
the YNL based code for easy prototyping and development.
Add a partial family definition. I've tested the string
set and rings. I don't have any MAC Merge implementation
to test with, but I added the definition for it, anyway,
because it's last. New commands can simply be added at
the end without having to worry about manually providing
IDs / values.
Set (with notification support - None is the response,
the data is from the notification):
$ sudo ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/ethtool.yaml \
--do rings-set \
--json '{"header":{"dev-name":"enp0s31f6"}, "rx":129}' \
--subscribe monitor
None
[{'msg': {'header': {'dev-index': 2, 'dev-name': 'enp0s31f6'},
'rx': 136,
'rx-max': 4096,
'tx': 256,
'tx-max': 4096,
'tx-push': 0},
'name': 'rings-ntf'}]
Do / dump (yes, the kernel requires that even for dump and even
if empty - the "header" nest must be there):
$ ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/ethtool.yaml \
--do rings-get \
--json '{"header":{"dev-index": 2}}'
{'header': {'dev-index': 2, 'dev-name': 'enp0s31f6'},
'rx': 136,
'rx-max': 4096,
'tx': 256,
'tx-max': 4096,
'tx-push': 0}
$ ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/ethtool.yaml \
--dump rings-get \
--json '{"header":{}}'
[{'header': {'dev-index': 2, 'dev-name': 'enp0s31f6'},
'rx': 136,
'rx-max': 4096,
'tx': 256,
'tx-max': 4096,
'tx-push': 0},
{'header': {'dev-index': 3, 'dev-name': 'wlp0s20f3'}, 'tx-push': 0},
{'header': {'dev-index': 19, 'dev-name': 'enp58s0u1u1'},
'rx': 100,
'rx-max': 4096,
'tx-push': 0}]
And error reporting:
$ ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/ethtool.yaml \
--dump rings-get \
--json '{"header":{"flags":5}}'
Netlink error: Invalid argument
nl_len = 68 (52) nl_flags = 0x300 nl_type = 2
error: -22 extack: {'msg': 'reserved bit set',
'bad-attr-offs': 24,
'bad-attr': '.header.flags'}
None
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
