Implement devlink port function commands to enable / disable IPsec
packet offloads. This is used to control the IPsec capability of the
device.
When ipsec_offload is enabled for a VF, it prevents adding IPsec packet
offloads on the PF, because the two cannot be active simultaneously due
to HW constraints. Conversely, if there are any active IPsec packet
offloads on the PF, it's not allowed to enable ipsec_packet on a VF,
until PF IPsec offloads are cleared.
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-9-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement devlink port function commands to enable / disable IPsec
crypto offloads. This is used to control the IPsec capability of the
device.
When ipsec_crypto is enabled for a VF, it prevents adding IPsec crypto
offloads on the PF, because the two cannot be active simultaneously due
to HW constraints. Conversely, if there are any active IPsec crypto
offloads on the PF, it's not allowed to enable ipsec_crypto on a VF,
until PF IPsec offloads are cleared.
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-8-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case user wants to configure the SFs, for example: to use only vdpa
functionality, he needs to fully probe a SF, configure what he wants,
and afterward reload the SF.
In order to save the time of the reload, local SFs will probe without
any auxiliary sub-device, so that the SFs can be configured prior to
its full probe.
The defaults of the enable_* devlink params of these SFs are set to
false.
Usage example:
Create SF:
$ devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 11
$ devlink port function set pci/0000:08:00.0/32768 \
hw_addr 00:00:00:00:00:11 state active
Enable ETH auxiliary device:
$ devlink dev param set auxiliary/mlx5_core.sf.1 \
name enable_eth value true cmode driverinit
Now, in order to fully probe the SF, use devlink reload:
$ devlink dev reload auxiliary/mlx5_core.sf.1
At this point the user have SF devlink instance with auxiliary device
for the Ethernet functionality only.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Provide information for Kconfig flags defined but not documented till this
patch series for the mlx5 driver.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The mlx5 device driver documentation page has grown in size and should be
split into multiple subpages. This change also contains a table of contents
for these new subpages.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
