Pull more ARM SoC updates from Arnd Bergmann:
"These are changes that for some reason ended up not making it into the
first four branches but that should still make it into 6.9:
- A rework of the omap clock support that touches both drivers and
device tree files
- The reset controller branch changes that had a dependency on late
bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the
drivers branch
- The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree
changes that got delayed and needed some extra time in linux-next
for wider testing"
* tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
soc: fsl: dpio: fix kcalloc() argument order
bus: ts-nbus: Improve error reporting
bus: ts-nbus: Convert to atomic pwm API
riscv: dts: starfive: jh7110: Add camera subsystem nodes
ARM: bcm: stop selecing CONFIG_TICK_ONESHOT
ARM: dts: omap3: Update clksel clocks to use reg instead of ti,bit-shift
ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift
clk: ti: Improve clksel clock bit parsing for reg property
clk: ti: Handle possible address in the node name
dt-bindings: pwm: opencores: Add compatible for StarFive JH8100
dt-bindings: riscv: cpus: reg matches hart ID
reset: Instantiate reset GPIO controller for shared reset-gpios
reset: gpio: Add GPIO-based reset controller
cpufreq: do not open-code of_phandle_args_equal()
of: Add of_phandle_args_equal() helper
reset: simple: add support for Sophgo SG2042
dt-bindings: reset: sophgo: support SG2042
riscv: dts: microchip: add specific compatible for mpfs pdma
riscv: dts: microchip: add missing CAN bus clocks
ARM: brcmstb: Add debug UART entry for 74165
...
Pull MTD updates from Miquel Raynal:
"MTD:
- The Carillo Ranch driver has been removed
- Top level mtd bindings have received a couple of improvements
(references, selects)
- The ssfdc driver received few minor adjustments
- The usual load of misc/small improvements and fixes
Raw NAND:
- The main series brought is an update of the Broadcom support to
support all BCMBCA SoCs and their specificity (ECC, write
protection, configuration straps), plus a few misc fixes and
changes in the main driver. Device tree updates are also part of
this PR, initially because of a misunderstanding on my side.
- The STM32_FMC2 controller driver is also upgraded to properly
support MP1 and MP25 SoCs.
- A new compatible is added for an Atmel flavor.
- Among all these feature changes, there is as well a load of
continuous read related fixes, avoiding more corner conditions and
clarifying the logic. Finally a few miscellaneous fixes are made to
the core, the lpx32xx_mlc, fsl_lbc, Meson and Atmel controller
driver, as well as final one in the Hynix vendor driver.
SPI-NAND:
- The ESMT support has been extended to match 5 bytes ID to avoid
collisions. Winbond support on its side receives support for
W25N04KV chips.
SPI NOR:
- SPI NOR gets the non uniform erase code cleaned. We stopped using
bitmasks for erase types and flags, and instead introduced
dedicated members. We then passed the SPI NOR erase map to MTD.
Users can now determine the erase regions and make informed
decisions on partitions size.
- An optional interrupt property is now described in the bindings"
* tag 'mtd/for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (50 commits)
mtd: rawnand: Ensure continuous reads are well disabled
mtd: rawnand: Constrain even more when continuous reads are enabled
mtd: rawnand: brcmnand: Add support for getting ecc setting from strap
mtd: rawnand: brcmnand: fix sparse warnings
mtd: nand: raw: atmel: Fix comment in timings preparation
mtd: rawnand: Ensure all continuous terms are always in sync
mtd: rawnand: Add a helper for calculating a page index
mtd: rawnand: Fix and simplify again the continuous read derivations
mtd: rawnand: hynix: remove @nand_technology kernel-doc description
dt-bindings: atmel-nand: add microchip,sam9x7-pmecc
mtd: rawnand: brcmnand: Support write protection setting from dts
mtd: rawnand: brcmnand: Add BCMBCA read data bus interface
mtd: rawnand: brcmnand: Rename bcm63138 nand driver
arm64: dts: broadcom: bcmbca: Update router boards
arm64: dts: broadcom: bcmbca: Add NAND controller node
ARM: dts: broadcom: bcmbca: Add NAND controller node
mtd: spi-nor: core: correct type of i
mtd: spi-nor: core: set mtd->eraseregions for non-uniform erase map
mtd: spi-nor: core: get rid of SNOR_OVERLAID_REGION flag
mtd: spi-nor: core: get rid of SNOR_LAST_REGION flag
...
This pull request contains Broadcom ARM64-based SoCs changes for 6.9,
please pull the following:
- Rafal defines a proper NVMEM layout for the Asus GT-AC5300 router and
removes some invalid Device Tree properties pertaining to the
Ethernet switch on bcm4908
* tag 'arm-soc/for-6.9/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcmbca: bcm4908: drop invalid switch cells
arm64: dts: broadcom: bcmbca: bcm4908: use NVMEM layout for Asus GT-AC5300
Link: https://lore.kernel.org/r/20240307200441.2151734-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the '-@' DTC option for the Raspberry Pi devices. This option
populates the '__symbols__' node that contains all the necessary symbols
for supporting device-tree overlays (for instance from the firmware or
the bootloader) on these devices.
The Rasbperry Pi devices are well known for their GPIO header, that
allow various "HATs" or other modules do be connected and this enables
users to create out-of-tree device-tree overlays for these modules.
Please note that this change does increase the size of the resulting DTB
by ~40%. For example, with v6.4-rc1 increase in size is as follows:
bcm2711-rpi-400.dtb 27556 -> 38141 bytes
bcm2711-rpi-4-b.dtb 27484 -> 38069 bytes
bcm2711-rpi-cm4-io.dtb 27373 -> 38076 bytes
bcm2837-rpi-3-a-plus.dtb 14930 -> 20713 bytes
bcm2837-rpi-3-b.dtb 15107 -> 20979 bytes
bcm2837-rpi-3-b-plus.dtb 15463 -> 21443 bytes
bcm2837-rpi-cm3-io3.dtb 14429 -> 20098 bytes
bcm2837-rpi-zero-2-w.dtb 14781 -> 20524 bytes
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Link: https://lore.kernel.org/r/20220410225940.135744-2-aurelien@aurel32.net
[ukleinek: rebased to v6.4, replaced by a single assignment to DTC_FLAGS]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
This fixes:
arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dtb: leds@800: 'led-lan@19', 'led-power@11', 'led-wan-red@12', 'led-wan-white@15', 'led-wps@14' do not match any of the regexes: '^led@[a-f0-9]+$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/all/20230228144400.21689-2-zajec5@gmail.com/
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This fixes:
arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: nand-controller@1800: interrupt-names:0: 'nand_ctlrdy' was expected
From schema: Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: nand-controller@1800: Unevaluated properties are not allowed ('interrupt-names' was unexpected)
From schema: Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/all/20230228144400.21689-1-zajec5@gmail.com/
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The DeviceTree Specification v0.3 specifies that the cache node
'compatible' and 'cache-level' properties are 'required'. Cf.
s3.8 Multi-level and Shared Cache Nodes
The 'cache-unified' property should be present if one of the
properties for unified cache is present ('cache-size', ...).
Update the Device Trees accordingly.
Acked-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20221122163208.3810985-3-pierre.gondois@arm.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This pull request contains Broadcom ARM64-based SoC changes for 6.1,
please pull the following:
- Rafal adds the BCM4908 LED controller node and describes all 32 LED
pins, he also adds support for the Asus GC-AC5300 LEDs
* tag 'arm-soc/for-6.1/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm4908: add Asus GT-AC5300 LEDs
arm64: dts: broadcom: bcm4908: add LEDs controller block
arm64: dts: broadcom: bcm4908: add remaining LED pins
Link: https://lore.kernel.org/r/20220915023044.2350782-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull ARM DT updates from Arnd Bergmann:
"As usual, the bulk of the changes for the SoC tree are devicetree file
updates, and most of these changes are for 64-bit embedded machines.
As before, there are a ton of style cleanups, and additional hardware
support for existing machines.
Looking only at the new SoC, the notable additions are:
- A whole family of Broadcom broadband SoCs, both 32-bit and 64-bit:
BCM63178, BCM63158, BCM4912, BCM6858, BCM6878, BCM6846, BCM63146,
BCM6856, BCM6855, BCM6756, BCM63148, and BCM6813. Each SoC comes
with a corresponding reference board.
- The new NXP i.MX93 SoC, the follow-up to the popular i.MX6 and
i.MX8 embedded SoCs, now using Cortex-A55 cores and the Ethos-U65
NPU.
- Qualcomm Snapdragon 8cx Gen3 (SC8280XP), the current high end of
Arm based Laptop SoCs, and its automotive cousin, the SA8540P. The
SC8280XP is used in the Lenovo Thinkpad X13s laptop that also gets
added here in addition to the reference boards.
- Allwinner H616, a newer version of the H6 SoC, targeted at
Set-top-box applications. It comes with dts files for the Orange Pi
zero2 single-board computer and the X96 Mate set-top-box
- Marvell Prestera 98DX2530 (AlleyCat5), a network switch chip in the
Armada SoC family based on the Cortex-A55 core.
New machines based on previously supported SoCs include:
- Several new machines on NXP i.MX platforms: multiple Toradex
Colibri boards using the "Iris" and "Ixora" carriers, DH
electronics i.MX8M Plus DHCOM and PDK2, TQ-Systems TQMa8MPQL, and
phytech phyBOARD-Polis-i.MX8MM.
- Google Chameleon v3 FPGA board based on Intel Arria10 and Stratix
10 Software Virtual platform, both in the SoCFPGA platform.
- Two new wireless devices based on Broadcom SoCs: The Asus GT-AX6000
Router and the Cisco Meraki MR26 access point
- Improved Chromebook support for both the Mediatek and Qualcomm SoC
families brought added machines: Acer Chromebook 514 (MT8192), Acer
Chromebook Spin 513 (MT8195) and a couple of SC7180 based machines
including the Lenovo IdeaPad Chromebook Duet 3.
- Xiaomi Mi Mix2s, LG G7 and LG V35 are mobile phones based on
Qualcomm SDM845, while Mi 5s Plus is based on MSM8996.
- Finally, there are a few development board on other chips: PCB8309
(Microchip lan966x), Radxa Rock Pi S (Rockchips RK3308) DH DRC
Compact (ST STM32MP1) and Inforce IFC6560 (Qualcomm SDM660)"
* tag 'arm-dt-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (829 commits)
dt-bindings: soc: bcm: use absolute path to other schema
dt-bindings: soc: bcm: drop quotes when not needed
dt-bindings: soc: microchip: use absolute path to other schema
dt-bindings: soc: microchip: drop quotes when not needed
ARM: dts: lan966x: keep lan966 entries alphabetically sorted
ARM: dts: lan966x: add support for pcb8309
dt-bindings: arm: at91: add lan966 pcb8309 board
ARM: dts: lan966x: Enable network driver on pcb8291
ARM: dts: lan966x: Disable can0 on pcb8291
ARM: dts: lan966x: Add gpio-restart
dt-bindings: arm: aspeed: add Aspeed Evaluation boards
arm64: dts: qcom: Add support for Xiaomi Mi Mix2s
dt-bindings: arm: qcom: Add Xiaomi Mi Mix2s bindings
dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices
dt-bindings: arm: qcom: add missing SM6350 board compatibles
dt-bindings: arm: qcom: add missing SM6125 board compatibles
dt-bindings: arm: qcom: add missing SDM845 board compatibles
dt-bindings: arm: qcom: add missing SDM636 board compatibles
dt-bindings: arm: qcom: add missing SDM630 board compatibles
dt-bindings: arm: qcom: add missing QCS404 board compatibles
...
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.20, second part, please pull the following:
- Rafal adds basic support for the BCM4912-based router Asus GT-AX6000,
he also has ARCH_BCM4908 select ARCH_BCMBCA such that in the next cycle
we can remove ARCH_BCM4908 and continue to have make oldconfig work.
Finally he spells out what BCA means to make it clearer
* tag 'arm-soc/for-5.20/devicetree-arm64-part2' of https://github.com/Broadcom/stblinux:
arm64: bcmbca: Include full family name in Kconfig
arm64: make ARCH_BCM4908 select ARCH_BCMBCA
arm64: dts: Add base DTS file for bcmbca device Asus GT-AX6000
Link: https://lore.kernel.org/r/20220715221642.297536-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM64-based SocS Device Tree
updates for 5.20, please pull the following:
- William adds the ARCH_BCMBCA Kconfig entry to follow the ARM 32-bit
counter part and adds basic support for these DSL/PON SoCs: 63158,
4912, 63146, 6856, 6813
- Anand adds basic support for the 6858 SoC
- Krzysztof fixes a missing space between a property name and its value
in a number of DTS files
* tag 'arm-soc/for-5.20/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: Add DTS files for bcmbca SoC BCM6813
arm64: dts: Add DTS files for bcmbca SoC BCM6856
arm64: dts: Add DTS files for bcmbca SoC BCM63146
arm64: dts: broadcom: adjust whitespace around '='
ARM64: dts: Add DTS files for bcmbca SoC BCM6858
arm64: dts: Add DTS files for bcmbca SoC BCM4912
arm64: dts: Add DTS files for bcmbca SoC BCM63158
arm64: bcmbca: add arch bcmbca machine entry
Link: https://lore.kernel.org/r/20220711164451.3542127-5-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add spin-table enable-method and cpu-release-addr properties for
cpu0 node. This is required by all ARMv8 SoC. Otherwise some
bootloader like u-boot can not update cpu-release-addr and linux
fails to start up secondary cpus.
Fixes: 2961f69f15 ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The cpu mask value in interrupt property inherits from bcm4908.dtsi
which sets to four cpus. Correct the value to two cpus for dual core
BCM4906 SoC.
Fixes: c8b404fb05 ("arm64: dts: broadcom: bcm4908: add BCM4906 Netgear R8000P DTS files")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add DTS for ARMv8 based broadband SoC BCM6813. bcm6813.dtsi is the
SoC description DTS header and bcm96813.dts is a simple DTS file for
Broadcom BCM96813 Reference board that only enable the UART port.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add DTS for ARMv8 based broadband SoC BCM6856. bcm6856.dtsi is the
SoC description DTS header and bcm96856.dts is a simple DTS file for
Broadcom BCM96956 Reference board that only enable the UART port.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add DTS for ARMv8 based broadband SoC BCM63146. bcm63146.dtsi is the
SoC description DTS header and bcm963146.dts is a simple DTS file for
Broadcom BCM963146 Reference board that only enable the UART port.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment. No functional
changes (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add DTS for ARMv8 based broadband SoC BCM6858. bcm6858.dtsi is the SoC
description DTS header and bcm96858.dts is a simple DTS file for
Broadcom BCM96858 Reference board that only enables the UART port.
Signed-off-by: Anand Gore <anand.gore@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add DTS for ARMv8 based broadband SoC BCM4912. bcm4912.dtsi is the
SoC description DTS header and bcm94912.dts is a simple DTS file for
Broadcom BCM94912 Reference board that only enable the UART port.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add DTS for ARMv8 based broadband SoC BCM63158. bcm63158.dtsi is the
SoC description DTS header and bcm963158.dts is a simple DTS file for
Broadcom BCM963158 Reference board that only enable the UART port.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
