Pull SoC device tree updates from Arnd Bergmann:
"There is very little going on with new SoC support this time, all the
new chips are variations of others that we already support, and they
are all based on ARMv8 cores:
- Mediatek MT7981B (Filogic 820) and MT7988A (Filogic 880) are
networking SoCs designed to be used in wireless routers, similar to
the already supported MT7986A (Filogic 830).
- NXP i.MX8DXP is a variant of i.MX8QXP, with two CPU cores less.
These are used in many embedded and industrial applications.
- Renesas R8A779G2 (R-Car V4H ES2.0) and R8A779H0 (R-Car V4M) are
automotive SoCs.
- TI J722S is another automotive variant of its K3 family, related to
the AM62 series.
There are a total of 7 new arm32 machines and 45 arm64 ones, including
- Two Android phones based on the old Tegra30 chip
- Two machines using Cortex-A53 SoCs from Allwinner, a mini PC and a
SoM development board
- A set-top box using Amlogic Meson G12A S905X2
- Eight embedded board using NXP i.MX6/8/9
- Three machines using Mediatek network router chips
- Ten Chromebooks, all based on Mediatek MT8186
- One development board based on Mediatek MT8395 (Genio 1200)
- Seven tablets and phones based on Qualcomm SoCs, most of them from
Samsung.
- A third development board for Qualcomm SM8550 (Snapdragon 8 Gen 2)
- Three variants of the "White Hawk" board for Renesas automotive
SoCs
- Ten Rockchips RK35xx based machines, including NAS, Tablet, Game
console and industrial form factors.
- Three evaluation boards for TI K3 based SoCs
The other changes are mainly the usual feature additions for existing
hardware, cleanups, and dtc compile time fixes. One notable change is
the inclusion of PowerVR SGX GPU nodes on TI SoCs"
* tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (824 commits)
riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig
riscv: dts: starfive: jh7100: fix root clock names
ARM: dts: samsung: exynos4412: decrease memory to account for unusable region
arm64: dts: qcom: sm8250-xiaomi-elish: set rotation
arm64: dts: qcom: sm8650: Fix SPMI channels size
arm64: dts: qcom: sm8550: Fix SPMI channels size
arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433
arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure
arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector
dt-bindings: soc: renesas: renesas-soc: Add pattern for gray-hawk
dtc: Enable dtc interrupt_provider check
arm64: dts: st: add video encoder support to stm32mp255
arm64: dts: st: add video decoder support to stm32mp255
ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk
ARM: dts: stm32: enable CRC on stm32mp135f-dk
ARM: dts: stm32: add CRC on stm32mp131
ARM: dts: add stm32f769-disco-mb1166-reva09
ARM: dts: stm32: add display support on stm32f769-disco
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
ARM: dts: stm32: add DSI support on stm32f769
...
Jetson Orin NX and Jetson Orin Nano DTSI files just define the HDA label
and it is already added as part of base DTS files.
Hence, removing these files.
Signed-off-by: sheetal <sheetal@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add audio support for the NVIDIA Jetson Orin NX (p3767, SKU0) module and
Jetson Orin Nano (p3767, SKU5) module Developer Kit with P3768 carrier
board.
APE and HDA sound cards are enabled.
Supported IO interfaces: I2S2 and I2S4.
Signed-off-by: sheetal <sheetal@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
I2S3, I2S5, DMIC1, DMIC2, DMIC4, DSPK1 and DSPK2 IO ports are not
defined. Those are not defined earlier because it was inside platform
DT and defined only for supported IOs by the platform.
Now these are part of SoC DTSI, all IOs ports are defined
so that all the ports are available to be used by platforms.
Signed-off-by: sheetal <sheetal@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
AHUB and its child nodes ports are part of platform DTS and with new
platform support these entries need to be defined again.
As they are common across the platforms, moving them to SoC
DTSI to avoid code duplicacy.
AHUB HW accelerators are used for audio processing and typically all of
these are made available. Platforms can enable all of these just by
enabling the AHUB parent device. However IO interfaces (which are also
children of AHUB) are selectively enabled based on what the platform
actually exposes for interaction with external world.
Signed-off-by: sheetal <sheetal@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Populate the Cypress USB Type-C controller for Tegra194 Jetson AGX
Xavier board.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the USB device support for the Jetson AGX Xavier platform.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the INA3221 current monitors that are present on the Jetson AGX
Xavier and Jetson Xavier NX boards.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The MGBE devices found on Tegra234 need their AXI interface configured
to operate at peak performance. Ideally we would do this in the driver
based off the compatible string, but the DT bindings already specify a
separate mechanism, so reuse that.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The MGBE power-domains on Tegra234 are mapped to the MGBE controllers as
follows:
MGBE0 (0x68000000) --> Power-Domain MGBEB
MGBE1 (0x69000000) --> Power-Domain MGBEC
MGBE2 (0x6a000000) --> Power-Domain MGBED
Update the device-tree nodes for Tegra234 to correct this.
Fixes: 610cdf3186 ("arm64: tegra: Add MGBE nodes on Tegra234")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra234 boards use a mixture of aliases for the SD/MMC hardware blocks,
which can lead to confusion. A common method was to use mmc3 as the
alias for the eMMC because "SDMMC3" happens to be the name of the
corresponding controller in the reference manual. This isn't a great
choice because there is no hardware named SDMMC0, so the mmc0 alias
would never get used with that nomenclature and in fact mmc1 and mmc2
wouldn't either in many configurations, thereby creating weird
discontiguous enumeration.
Instead of trying to match the aliases to the hardware block names, use
mmc0 to denote the device's primary SD/MMC controller (typically eMMC)
and mmc1 for the secondary SD/MMC controller (typically removable SD).
In cases where eMMC is the only controller we can omit the mmc1 alias
and if a device has no eMMC, the removable SD card can be aliased to
mmc0 instead.
Co-developed-by: Russell Xiao <russellx@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The cros_ec driver currently assumes that cros-ec-spi compatible device
nodes are a wakeup-source even though the wakeup-source property is not
defined.
Some Chromebooks use a separate wake pin, while others overload the
interrupt for wake and IO. With the current assumption, spurious wakes
can occur on systems that use a separate wake pin. It is planned to
update the driver to no longer assume that the EC interrupt pin should
be enabled for wake.
Add the wakeup-source property to all cros-ec-spi compatible device
nodes to signify to the driver that they should still be a valid wakeup
source.
Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The shared interrupts 0-9 of the TKE are mapped to interrupts 0-9, but
shared interrupts 10-15 are mapped to 256-261. Correct the mapping for
the final 6 interrupts. This prevents the TKE from requesting the RTC
interrupt (along with several GTE and watchdog interrupts).
Reported-by: Shubhi Garg <shgarg@nvidia.com>
Fixes: 28d860ed02 ("arm64: tegra: Enable native timers on Tegra234")
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Populate the ina219 and ina3221 power-sensors for the various Tegra234
boards. These sensors are located on the Tegra234 module boards and the
configuration of some sensors is common across the different Tegra234
modules. Therefore, add any common sensor configurations to appropriate
device tree source file so it can be re-used across modules.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
According to the bindings, both Tegra210 and Tegra114 compatible strings
need to be specified since the version of this hardware block found in
Tegra210 is backwards-compatible.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit 940acdac99 ("arm64: tegra: Add UARTE device tree node on
Tegra234") added the device tree node for the UARTE on Tegra234 but
didn't include the "dmas" and "dma-names" properties required for this
device when it's used in high-speed mode.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The SBSA UART and TCU as well as the TCU alias and the stdout-path are
configured via the P3768 carrier board DTS include, so the can be
removed from the system DTS file.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The SBSA UART device tree bindings require a current-speed property that
specifies the baud rate configured by the firmware. Add it on Jetson AGX
Orin and Jetson Orin Nano/NX.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Google Pixel C has a JDI LPM102A188A display panel, so add a
DT node for it.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Google Pixel C has a TI LP8557 backlight controller, so add a
DT node for it.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the iommu property to the host1x node to register it with its
swgroup.
Signed-off-by: Rayyan Ansari <rayyan@ansari.sh>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The QSPI device used on Jetson Orin NX and Nano modules (p3767) is
the same as Jetson AGX Orin (p3701) and should have a maximum speed of
102 MHz.
Fixes: 13b0aca303 ("arm64: tegra: Support Jetson Orin NX")
Signed-off-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The SD card detect pin is active-low on all Orin Nano and NX SKUs that
have an SD card slot.
Fixes: 13b0aca303 ("arm64: tegra: Support Jetson Orin NX")
Signed-off-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
According to the device tree bindings, the powergate definition nodes
don't contain clock-names and reset-names properties, so remove them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
There is no "maxim,disable-etr" property (but there is
maxim,enable-etr), neither in the bindings nor in the Linux driver:
tegra210-smaug.dtb: regulator@1c: Unevaluated properties are not allowed ('maxim,disable-etr' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Create the device tree nodes for the SPI1, SPI2 and SPI3 controllers
found on Tegra234.
Signed-off-by: Gautham Srinivasan <gauthams@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Activate UARTA and UARTE functionalities for Orin Nano.
- UARTA is accessible via the 40-pin header with pin 8 and 10 (TX/RX)
- UARTE utilizes the M2.E connector
Signed-off-by: Gautham Srinivasan <gauthams@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This commit adds the device tree node for UARTE on Tegra234.
Signed-off-by: Gautham Srinivasan <gauthams@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the 3.3V supplies for PCIe C1 controller and Display Port controller
for the NVIDIA IGX Orin platform.
Signed-off-by: Shubhi Garg <shgarg@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The device tree bindings for the Tegra high-speed UART require the
reset-names property, so add it whenever the compatible string for the
serial port is overwritten.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The debug UART doesn't support DMA and the DT bindings prohibit the use
of the dmas and dma-names properties for it, so remove them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
It turns out that these devices can get quite hot to the touch with the
standard cooling configuration, so add another trip point at 35°C along
with a cooling map to help keep the system reasonably cool at very low
system load.
Reviewed-by: Yi-Wei Wang <yiweiw@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The PCI nodes for Jetson Orin NX are already defined at the carrier
board level, so the duplicates can be dropped at the platform level.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add audio support for the NVIDIA IGX Orin development kit having P3701
module with P3740 carrier board.
Move the common device-tree nodes to a new file tegra234-p3701.dtsi and
use this for Jetson AGX Orin and NVIDIA IGX Orin platforms
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
[treding@nvidia.com: properly sort nodes]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Update the CPU OPP table to include all frequencies supported by
Tegra234. Different platforms can choose to keep all or few entries
based on their power and performance tunings.
Signed-off-by: Shao-Chun Kao <shaochunk@nvidia.com>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
After commit 71de0a054d ("arm64: tegra: Drop serial clock-names and
reset-names") was applied, the HSUART failed to probe and the following
error is seen:
serial-tegra 70006300.serial: Couldn't get the reset
serial-tegra: probe of 70006300.serial failed with error -2
Commit 71de0a054d ("arm64: tegra: Drop serial clock-names and
reset-names") is correct because the "reset-names" property is not
needed for 8250 UARTs. However, the "reset-names" is required for the
HSUART and should have been populated as part of commit a63c0cd837
("arm64: dts: tegra: smaug: Add Bluetooth node") that enabled the HSUART
for the Pixel C. Fix this by populating the "reset-names" property for
the HSUART on the Pixel C.
Fixes: a63c0cd837 ("arm64: dts: tegra: smaug: Add Bluetooth node")
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
After commit 71de0a054d ("arm64: tegra: Drop serial clock-names and
reset-names") was applied, the HSUART failed to probe and the following
error is seen:
serial-tegra 3100000.serial: Couldn't get the reset
serial-tegra: probe of 3100000.serial failed with error -2
Commit 71de0a054d ("arm64: tegra: Drop serial clock-names and
reset-names") is correct because the "reset-names" property is not
needed for 8250 UARTs. However, the "reset-names" is required for the
HSUART and should have been populated as part of commit ff578db7b6
("arm64: tegra: Enable UART instance on 40-pin header") that
enabled the HSUART for Jetson AGX Orin. Fix this by populating the
"reset-names" property for the HSUART on Jetson AGX Orin.
Fixes: ff578db7b6 ("arm64: tegra: Enable UART instance on 40-pin header")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The following error is seen on boot for the NVIDIA IGX Orin platform ...
serial-tegra 3100000.serial: failed to get alias id, errno -19
Fix this by populating the necessary alias for the serial device.
Fixes: c95711d7db ("arm64: tegra: Add support for IGX Orin")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
I2S data sanity test failures are seen at lower AHUB clock rates
on Tegra234. The Tegra194 uses the same clock relationship for AHUB
and it is likely that similar issues would be seen. Thus update the
AHUB clock parent and rates here as well for Tegra194, Tegra186
and Tegra210.
Fixes: 177208f7b0 ("arm64: tegra: Add DT binding for AHUB components")
Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
I2S data sanity tests fail beyond a bit clock frequency of 6.144MHz.
This happens because the AHUB clock rate is too low and it shows
9.83MHz on boot.
The maximum rate of PLLA_OUT0 is 49.152MHz and is used to serve I/O
clocks. It is recommended that AHUB clock operates higher than this.
Thus fix this by using PLLP_OUT0 as parent clock for AHUB instead of
PLLA_OUT0 and fix the rate to 81.6MHz.
Fixes: dc94a94daa ("arm64: tegra: Add audio devices on Tegra234")
Cc: stable@vger.kernel.org
Signed-off-by: Sheetal <sheetal@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Mohan Kumar D <mkumard@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the TJ thermal zone and hook up cooling maps for the PWM-
controlled fan and two trip points.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the TJ thermal zone and hook up cooling maps for the PWM-
controlled fan and two trip points.
This also removes a duplicate definition of the PWM fan and changes its
cooling levels. This should have no effect, though, because the fan
wasn't previously connected to anything and by default would be turned
off at probe time.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
