Add support for the Powkiddy RGB10MAX3. The Powkiddy RGB10MAX3 is a
handheld gaming device with a 720p 5.0 inch screen powered by the
Rockchip RK3566 SoC. It includes a Realtek 8723ds WiFi/BT module, 2 ADC
joysticks powered by a 4-way muxed ADC channel, and several GPIO
face buttons. There are 2 SDMMC slots (sdmmc1 and sdmmc3), 3 pwm
controlled LEDs, and the device includes 1GB of RAM.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20240212184950.52210-8-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Edgeble NCM6A SOM has on-module M.2 1216-compatible WiFi modules.
Currently, AW-XM548NF WiFi6 and Intel 8260D2W WiFi5 modules are supported.
WiFi modules are fixed on SoM, not pluggable M.2 slots, so different SoM's
for each type of WiFi module.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20231125190522.87607-5-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add support for the Anbernic RG-ARC S and RG-ARC D devices. These
devices feature the following:
- Rockchip RK3566 SoC
- 4 inch 480x640 display (rotated)
- Goodix multi-touch (ARC D only, untested as I lack the device)
- 1GB (ARC S) or 2GB (ARC D) of RAM
- 2 SDMMC slots
- eMMC (ARC D only)
- Realtek 8821CS WiFi/Bluetooth
- External stereo speakers
- 6 face buttons (A, B, C, X, Y, Z) along with a D-Pad and start and
select buttons.
- A PWM vibrator.
Note that the Goodix touchscreen on I2C2 is not defined, as I lack
the necessary hardware to confirm it works correctly with the mainline
driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20240123212111.202146-5-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cool Pi CM5 EVB works as a mother board connect with CM5.
CM5 Specification:
- Rockchip RK3588
- LPDDR4 2/4/8/16 GB
- TF scard slot
- eMMC 8/32/64/128 GB module
- Gigabit ethernet x 1 with PHY YT8531
- Gigabit ethernet x 1 drived by PCIE with YT6801S
CM5 EVB Specification:
- HDMI Type A out x 2
- HDMI Type D in x 1
- USB 2.0 Host x 2
- USB 3.0 OTG x 1
- USB 3.0 Host x 1
- PCIE M.2 E Key for Wireless connection
- PCIE M.2 M Key for NVME connection
- 40 pin header
Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20231212124407.1897604-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
CoolPi 4B is a rk3588s based SBC.
Specification:
- Rockchip RK3588S
- LPDDR4 2/4/8/16 GB
- TF scard slot
- eMMC 8/32/64/128 GB module
- Gigabit ethernet drived by PCIE with RTL8111HS
- HDMI Type D out
- Mini DP out
- USB 2.0 Host x 2
- USB 3.0 OTG x 1
- USB 3.0 Host x 1
- WIFI/BT module AIC8800
- 40 pin header
Signed-off-by: Andy Yan <andyshrk@163.com>
arm64: dts: rockchip: Add support for rk3588s based board Cool Pi 4B
Link: https://lore.kernel.org/r/20231212124253.1897438-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add support for the Anbernic RG351V, which is a handheld gaming console
from Anbernic with an RK3326 SoC, a 640x480 LCD display, a single
analog joystick with several face buttons, two USB C ports, and
internal WiFi over USB. All hardware has been tested as working
except for the battery, which will require further modification to the
mainline rk817 battery driver before it can be used (the device was
built without a shunt resistor, and as such the battery cannot
measure current; only voltage).
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231120230131.57705-4-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add support for the Powkiddy X55. The Powkiddy X55 is a handheld
gaming device with a 720p 5.5 inch screen powered by the Rockchip
RK3566 SoC. It includes a Realtek 8821cs WiFi/BT module, 2 ADC
joysticks powered by 4 dedicated ADC channels, and several GPIO
face buttons. There are 2 SDMMC slots (sdmmc1 and sdmmc3), and an
8GB internal eMMC.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231204185719.569021-11-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Turing RK1 is an upcoming RK3588-based SoM from Turing Machines,
designed on the Jetson SO-DIMM form factor and meant to be compatible
with most Jetson carrier boards (but especially the Turing Pi 2 cluster
board from the same vendor). It has the typical I/O you'd expect from
a Jetson board, including:
- Two UARTs (UART9 for console, UART2 is auxiliary)
- PCI Express (2.0 x1 + 3.0 x4)
- Gigabit Ethernet
- On-board eMMC
- PWM fan w/ tach
- USB-OTG [1]
- HDMI and MIPI DSI [1]
- Miscellaneous external GPIO, I²C, SPI lines [1]
Beyond that, it is pretty similar to the RK3588 EVB (in terms of PMICs,
RTC, etc).
While this is absolutely a SoM, it is a little bit special in that it's
marketed directly to users as a compute node, while most SoMs are
intended to be a part/module incorporated into a larger system. Because
of this, a majority of the users will be treating the RK1 less like a
SoM and more like a miniature "blade server."
This patch introduces a dtsi to enable most[1] of the SoM I/O, as well
as a dts catered more directly to the "compute node" use case.
[1] These peripherals are not addressed with this patch.
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20231011225823.2542262-4-CFSworks@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Powkiddy RGB30 is a portable game device based on the Rockchip
RK3566 SoC. It has GPIO buttons on the face and sides for input, stereo
speakers, a 720x720 4 inch DSI display, a USB-C host port and a USB-C
peripheral port, dual SD card slots, WiFi, Bluetooth, and 1GB of RAM.
Working/Tested:
- SDMMC
- UART (for debugging)
- Buttons
- Charging/battery/PMIC
- Speaker/Headphones
- USB
- WiFi
- Bluetooth
- Display (at 59.04hz)
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231013183918.225666-6-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Orange Pi 5 Plus is RK3588 based SBC featuring:
- 2x 2.5G ethernet ports – onboard NIC hooked to PCIe 2.0 interface
- 2x USB 2.0 host ports
- 2x USB 3.0 host ports (exposed over USB 3.0 hub)
- Type-C port featuring USB 2.0/3.0 and Alt-DP mode
- PCIe 2.0/USB 2.0/I2S/I2C/UART on E.KEY socket
- RTC
- ES8388 on-board sound codec – jack in/out, onboard mic, speaker amplifier
- SPI NOR flash
- RGB LED (R is always on)
- IR receiver
- PCIe 3.0 on the bottom for NVMe, etc.
- 40pin GPIO header (with gpio, I2C, SPI, PWM, UART)
- Power, recovery and Mask ROM buttons
- 2x HDMI out, 1x HDMI in
- Slots/connectors for eMMC, uSD card, fan, MIPI CSI/DSI
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20231008130515.1155664-5-megi@xff.cz
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add board-specific devicetree file for the RK3399T-based Radxa ROCK 4SE
board. This board offers similar peripherals in a similar form-factor to
the existing ROCK Pi 4B but uses the cost-optimised RK3399T processor
(which has different OPP table than the RK3399) and other minimal hardware
changes.
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Link: https://lore.kernel.org/r/20230710115025.507439-4-chris.obbard@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Indiedroid Nova is an SBC from a sub-brand of Ameridroid that
includes the following hardware:
- A 40-pin GPIO header
- 2 USB-A 3.0 ports
- 2 USB-A 2.0 ports
- A USB-C 2.0 OTG port (used for USB power delivery)
- A USB-C 3.0 port that can do display port output.
- A Micro HDMI 2.1 port.
- A 1GB ethernet port.
- An RT8821CS based WiFi/Bluetooth module.
- A user replaceable eMMC module.
- An SDMMC card slot.
- A MIPI DSI connector.
- A MIPI CSI connector.
- A 3.5mm TRRS audio jack with microphone input.
- An 2 pin socket for an RTC battery.
- A 4 pin socket for a debug port.
- A power button (connected to PMIC), a reset button (connected to SoC
reset), a boot button, and a recovery button (both connected to the
ADC).
- 4GB, 8GB, or 16GB of system RAM.
This initial devicetree includes support for the WiFi, bluetooth,
analog audio out/in, SDMMC, eMMC, RTC, UART debugging, and has
the regulator values from the schematics. ADC, graphics output, GPU,
USB, and wired ethernet are still pending additional upstream changes.
Analog audio will require changes to handle a difference between the
requested clock frequency of 12288000 and the actual clock freqency
of 12287999 before it will work properly. This will be done in a
subsequent patch series.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20230531161220.280744-6-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Neural Compute Module 6B(Neu6B) IO board is an industrial form factor
ready-to-use IO board from Edgeble AI.
IO board offers plenty of peripherals and connectivity options and
this patch enables basic eMMC and UART which is enough to successfully
boot Linux.
General features:
- microSD slot
- 1x HDMI Out
- 1x HDMI In
- 2x DP
- 1x eDP
- 2x MIPI DSI connector
- 4x MIPI CSI2 connector
- 2x USB Host
- 2x USB 3.0 OTG/Host
- 1x SATA
- 1x 2.5Gbps Ethernet
- 1x 4G/5G mini PCIe
- 1x M.2 E-Key slot
- 1x Onboard PoE
- 1x RS485, RS232, CAN
- 1x Audio, MIC port
- RTC battery slot
- 40-pin GPIO expansion
Neu6B needs to mount on top of this IO board in order to create a
complete Edgeble Neural Compute Module 6B(Neu6B) IO platform.
Add support for Edgeble Neu6 Model B IO Board.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230516163454.997736-4-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add support for the Anbernic RG353PS. This device is identical in form
factor to the RG353P and has the following hardware differences:
- No touchscreen is present on i2c2 (or at all).
- Only contains 1GB of RAM.
- Has no eMMC.
- Only appears to ship with the 2nd revision of the display panel.
Note that the display panel has been added to the st7703 panel driver
in a separate commit series.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20230512162039.31132-3-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Edge2 is an ultraslim, credit-card sized ARM PC designed by Khadas.
In this patch, we will add basic device tree support for this board,
Only eMMC, UART are enabled, so it's capable of booting into
a basic linux system from eMMC via serial console.
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20230315033441.32719-3-dlan@gentoo.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Neural Compute Module 6(Neu6) IO board is an industrial form factor
ready-to-use IO board from Edgeble AI.
IO board offers plenty of peripherals and connectivity options and
this patch enables basic eMMC and UART which is enough to successfully
boot Linux.
Neu6 needs to mount on top of this IO board in order to create a
complete Edgeble Neural Compute Module 6(Neu6) IO platform.
Add support for Edgeble Neu6 Model A IO Board.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230110134658.820691-3-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong.
This device is similar to the NanoPi R2S, and has a 16MB
SPI NOR (mx25l12805d). The reset button is changed to
directly reset the power supply, another detail is that
both network ports have independent MAC addresses.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20221203074149.11543-3-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
LubanCat 2 is a rk3568 based SBC from EmbedFire.
Specification:
- Rockchip rk3568
- LPDDR4/4X 1/2/4/8 GB
- TF scard slot
- eMMC 8/32/64/128 GB
- Gigabit ethernet x 2
- HDMI out
- USB 2.0 Host x 1
- USB 2.0 Type-C OTG x 1
- USB 3.0 Host x 1
- Mini PCIE interface for WIFI/BT module
- M.2 key for 2280 NVME
- 40 pin header
Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20230108110817.2214859-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The LubanCat 1 is a RK3566 based SBC, developed by Dongguan EmbedFire
Electronic Technology Co., Ltd.
It has the following characteristics:
- MicroSD card slot, onboard eMMC flash memory
- 1GbE Realtek RTL8211F Ethernet Transceiver
- 1 USB Type-C port (power and USB2.0 OTG)
- 1 USB 3.0 Host port
- 3 USB 2.0 Host ports
- 1 HDMI
- 1 infrared receiver
- 1 MIPI DSI
- 1 MIPI CSI
- 1 x 4-section headphone jack
- Mini PCIe socket (USB or PCIe)
- 1 SIM Card slot
- 1 SYS LED and 1 PWR LED
- 40-pin GPIO expansion header
Signed-off-by: Wenhao Cui <lasstp5011@gmail.com>
Signed-off-by: Yuteng Zhong <zonyitoo@gmail.com>
Link: https://lore.kernel.org/r/Y6UdjhBD/Xa7ALya@VM-66-53-centos
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Radxa E25 is a network application carrier board for the Radxa CM3
Industrial (CM3I) SoM, which is based on the Rockchip RK3568 SoC.
It has the following features:
- MicroSD card socket, on board eMMC flash
- 2x 2.5GbE Realtek RTL8125B Ethernet transceiver
- 1x USB Type-C port (Power and Serial console)
- 1x USB 3.0 OTG port
- mini PCIe socket (USB or PCIe)
- ngff PCIe socket (USB or SATA)
- 1x User LED and 16x RGB LEDs
- 26-pin expansion header
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20221209102524.129367-3-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds the device tree for the "Model A" baseboard for
the SOQuartz CM4 SoM, which is not to be confused with the
Quartz64 Model A, which is the same form factor and SoC, but is
not a CM4 carrier board.
The board features a PCIe 2 x1 slot, USB 2 host ports, CSI/DSI
connectors, an eDP FFC connector, gigabit ethernet, HDMI, and a
12V DC barrel jack. Also present is a microSD card slot, 40-pin
GPIO, and a power and reset button.
Signed-off-by: Andrew Powers-Holmes <aholmes@omnom.net>
[rebase, misc fixes, reword]
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20221116115337.541601-5-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This adds a device tree for the PINE64 SOQuartz blade baseboard,
a 1U rack mountable baseboard for the CM4 form factor with PoE
support designed for the SOQuartz CM4 System-on-Module.
The board takes power from either PoE or a 5V DC input, and allows
for mounting an M.2 SSD.
The board also features one USB 2.0 host port, one HDMI output,
a 3.5mm jack for UART, and the aforementioned gigabit networking
port.
Signed-off-by: Andrew Powers-Holmes <aholmes@omnom.net>
[rebase, squash, reword, misc fixes]
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20221116115337.541601-3-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This device is a clone of Odroid Go Advance, with added PWM motor, internal
gamepad connected on USB instead of just having it be on GPIO + ADC, and
missing battery shunt resistor.
Due to missing shunt resistor and lack of a workaround in rk817_charger
driver rk817_charger is not enabled in dts.
There's also an LED on GPIO 77(I *guess* PB5 on &gpio2),
that is controlled in a weird way:
- It is set to red by setting output value to 1
- Set to green by setting output value to 0
- Set to yellow by setting gpio direction to input
I have no idea how to describe that in DTS, without adding a custom
driver, for now it's just left out.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Link: https://lore.kernel.org/r/20221117215954.4114202-6-maccraft123mc@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Anbernic RG353V and RG353VS are both RK3566 based handheld gaming devices
from Anbernic.
They are functionally very similar to the RG353P with the following
distinct differences:
- The battery size of the RG353V and RG353VS is 3200mAh instead of
3500mAh.
- The audio uses the PMIC's internal amplifier for a mono speaker
instead of an external amplifier with stereo speakers.
- The GPIOs for the R1 and R2 buttons are switched.
As for the differences between the RG353V and RG353VS, they are as
follows:
- The RG353VS has no touchscreen on i2c2.
- The RG353VS has no eMMC.
- The RG353VS has 1GB of RAM instead of 2GB.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20221028184045.13113-3-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
