mirror of
https://github.com/torvalds/linux.git
synced 2026-05-02 13:32:40 -04:00
697f3342477170bdf8759157bdc19c0b7b3e9d14
989 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Paolo Bonzini
|
1c3bed8006 |
Merge tag 'kvm-x86-fixes-6.9-rcN' of https://github.com/kvm-x86/linux into HEAD
- Fix a mostly benign bug in the gfn_to_pfn_cache infrastructure where KVM would allow userspace to refresh the cache with a bogus GPA. The bug has existed for quite some time, but was exposed by a new sanity check added in 6.9 (to ensure a cache is either GPA-based or HVA-based). - Drop an unused param from gfn_to_pfn_cache_invalidate_start() that got left behind during a 6.9 cleanup. - Disable support for virtualizing adaptive PEBS, as KVM's implementation is architecturally broken and can leak host LBRs to the guest. - Fix a bug where KVM neglects to set the enable bits for general purpose counters in PERF_GLOBAL_CTRL when initializing the virtual PMU. Both Intel and AMD architectures require the bits to be set at RESET in order for v2 PMUs to be backwards compatible with software that was written for v1 PMUs, i.e. for software that will never manually set the global enables. - Disable LBR virtualization on CPUs that don't support LBR callstacks, as KVM unconditionally uses PERF_SAMPLE_BRANCH_CALL_STACK when creating the virtual LBR perf event, i.e. KVM will always fail to create LBR events on such CPUs. - Fix a math goof in x86's hugepage logic for KVM_SET_MEMORY_ATTRIBUTES that results in an array overflow (detected by KASAN). - Fix a flaw in the max_guest_memory selftest that results in it exhausting the supply of ucall structures when run with more than 256 vCPUs. - Mark KVM_MEM_READONLY as supported for RISC-V in set_memory_region_test. - Fix a bug where KVM incorrectly thinks a TDP MMU root is an indirect shadow root due KVM unnecessarily clobbering root_role.direct when userspace sets guest CPUID. - Fix a dirty logging bug in the where KVM fails to write-protect TDP MMU SPTEs used for L2 if Page-Modification Logging is enabled for L1 and the L1 hypervisor is NOT using EPT (if nEPT is enabled, KVM doesn't use the TDP MMU to run L2). For simplicity, KVM always disables PML when running L2, but the TDP MMU wasn't accounting for root-specific conditions that force write- protect based dirty logging. |
||
|
David Matlack
|
b1a8d2b02b |
KVM: x86/mmu: Fix and clarify comments about clearing D-bit vs. write-protecting
Drop the "If AD bits are enabled/disabled" verbiage from the comments
above kvm_tdp_mmu_clear_dirty_{slot,pt_masked}() since TDP MMU SPTEs may
need to be write-protected even when A/D bits are enabled. i.e. These
comments aren't technically correct.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240315230541.1635322-4-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
||
|
David Matlack
|
feac19aa4c |
KVM: x86/mmu: Remove function comments above clear_dirty_{gfn_range,pt_masked}()
Drop the comments above clear_dirty_gfn_range() and clear_dirty_pt_masked(), since each is word-for-word identical to the comment above their parent function. Leave the comment on the parent functions since they are APIs called by the KVM/x86 MMU. No functional change intended. Signed-off-by: David Matlack <dmatlack@google.com> Link: https://lore.kernel.org/r/20240315230541.1635322-3-dmatlack@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
David Matlack
|
2673dfb591 |
KVM: x86/mmu: Write-protect L2 SPTEs in TDP MMU when clearing dirty status
Check kvm_mmu_page_ad_need_write_protect() when deciding whether to
write-protect or clear D-bits on TDP MMU SPTEs, so that the TDP MMU
accounts for any role-specific reasons for disabling D-bit dirty logging.
Specifically, TDP MMU SPTEs must be write-protected when the TDP MMU is
being used to run an L2 (i.e. L1 has disabled EPT) and PML is enabled.
KVM always disables PML when running L2, even when L1 and L2 GPAs are in
the some domain, so failing to write-protect TDP MMU SPTEs will cause
writes made by L2 to not be reflected in the dirty log.
Reported-by: syzbot+900d58a45dcaab9e4821@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=900d58a45dcaab9e4821
Fixes:
|
||
|
Sean Christopherson
|
1bc26cb909 |
KVM: x86/mmu: Precisely invalidate MMU root_role during CPUID update
Set kvm_mmu_page_role.invalid to mark the various MMU root_roles invalid during CPUID update in order to force a refresh, instead of zeroing out the entire role. This fixes a bug where kvm_mmu_free_roots() incorrectly thinks a root is indirect, i.e. not a TDP MMU, due to "direct" being zeroed, which in turn causes KVM to take mmu_lock for write instead of read. Note, paving over the entire role was largely unintentional, commit |
||
|
Sean Christopherson
|
fd706c9b16 |
KVM: x86: Snapshot if a vCPU's vendor model is AMD vs. Intel compatible
Add kvm_vcpu_arch.is_amd_compatible to cache if a vCPU's vendor model is compatible with AMD, i.e. if the vCPU vendor is AMD or Hygon, along with helpers to check if a vCPU is compatible AMD vs. Intel. To handle Intel vs. AMD behavior related to masking the LVTPC entry, KVM will need to check for vendor compatibility on every PMI injection, i.e. querying for AMD will soon be a moderately hot path. Note! This subtly (or maybe not-so-subtly) makes "Intel compatible" KVM's default behavior, both if userspace omits (or never sets) CPUID 0x0 and if userspace sets a completely unknown vendor. One could argue that KVM should treat such vCPUs as not being compatible with Intel *or* AMD, but that would add useless complexity to KVM. KVM needs to do *something* in the face of vendor specific behavior, and so unless KVM conjured up a magic third option, choosing to treat unknown vendors as neither Intel nor AMD means that checks on AMD compatibility would yield Intel behavior, and checks for Intel compatibility would yield AMD behavior. And that's far worse as it would effectively yield random behavior depending on whether KVM checked for AMD vs. Intel vs. !AMD vs. !Intel. And practically speaking, all x86 CPUs follow either Intel or AMD architecture, i.e. "supporting" an unknown third architecture adds no value. Deliberately don't convert any of the existing guest_cpuid_is_intel() checks, as the Intel side of things is messier due to some flows explicitly checking for exactly vendor==Intel, versus some flows assuming anything that isn't "AMD compatible" gets Intel behavior. The Intel code will be cleaned up in the future. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20240405235603.1173076-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Rick Edgecombe
|
992b54bd08 |
KVM: x86/mmu: x86: Don't overflow lpage_info when checking attributes
Fix KVM_SET_MEMORY_ATTRIBUTES to not overflow lpage_info array and trigger
KASAN splat, as seen in the private_mem_conversions_test selftest.
When memory attributes are set on a GFN range, that range will have
specific properties applied to the TDP. A huge page cannot be used when
the attributes are inconsistent, so they are disabled for those the
specific huge pages. For internal KVM reasons, huge pages are also not
allowed to span adjacent memslots regardless of whether the backing memory
could be mapped as huge.
What GFNs support which huge page sizes is tracked by an array of arrays
'lpage_info' on the memslot, of ‘kvm_lpage_info’ structs. Each index of
lpage_info contains a vmalloc allocated array of these for a specific
supported page size. The kvm_lpage_info denotes whether a specific huge
page (GFN and page size) on the memslot is supported. These arrays include
indices for unaligned head and tail huge pages.
Preventing huge pages from spanning adjacent memslot is covered by
incrementing the count in head and tail kvm_lpage_info when the memslot is
allocated, but disallowing huge pages for memory that has mixed attributes
has to be done in a more complicated way. During the
KVM_SET_MEMORY_ATTRIBUTES ioctl KVM updates lpage_info for each memslot in
the range that has mismatched attributes. KVM does this a memslot at a
time, and marks a special bit, KVM_LPAGE_MIXED_FLAG, in the kvm_lpage_info
for any huge page. This bit is essentially a permanently elevated count.
So huge pages will not be mapped for the GFN at that page size if the
count is elevated in either case: a huge head or tail page unaligned to
the memslot or if KVM_LPAGE_MIXED_FLAG is set because it has mixed
attributes.
To determine whether a huge page has consistent attributes, the
KVM_SET_MEMORY_ATTRIBUTES operation checks an xarray to make sure it
consistently has the incoming attribute. Since level - 1 huge pages are
aligned to level huge pages, it employs an optimization. As long as the
level - 1 huge pages are checked first, it can just check these and assume
that if each level - 1 huge page contained within the level sized huge
page is not mixed, then the level size huge page is not mixed. This
optimization happens in the helper hugepage_has_attrs().
Unfortunately, although the kvm_lpage_info array representing page size
'level' will contain an entry for an unaligned tail page of size level,
the array for level - 1 will not contain an entry for each GFN at page
size level. The level - 1 array will only contain an index for any
unaligned region covered by level - 1 huge page size, which can be a
smaller region. So this causes the optimization to overflow the level - 1
kvm_lpage_info and perform a vmalloc out of bounds read.
In some cases of head and tail pages where an overflow could happen,
callers skip the operation completely as KVM_LPAGE_MIXED_FLAG is not
required to prevent huge pages as discussed earlier. But for memslots that
are smaller than the 1GB page size, it does call hugepage_has_attrs(). In
this case the huge page is both the head and tail page. The issue can be
observed simply by compiling the kernel with CONFIG_KASAN_VMALLOC and
running the selftest “private_mem_conversions_test”, which produces the
output like the following:
BUG: KASAN: vmalloc-out-of-bounds in hugepage_has_attrs+0x7e/0x110
Read of size 4 at addr ffffc900000a3008 by task private_mem_con/169
Call Trace:
dump_stack_lvl
print_report
? __virt_addr_valid
? hugepage_has_attrs
? hugepage_has_attrs
kasan_report
? hugepage_has_attrs
hugepage_has_attrs
kvm_arch_post_set_memory_attributes
kvm_vm_ioctl
It is a little ambiguous whether the unaligned head page (in the bug case
also the tail page) should be expected to have KVM_LPAGE_MIXED_FLAG set.
It is not functionally required, as the unaligned head/tail pages will
already have their kvm_lpage_info count incremented. The comments imply
not setting it on unaligned head pages is intentional, so fix the callers
to skip trying to set KVM_LPAGE_MIXED_FLAG in this case, and in doing so
not call hugepage_has_attrs().
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Linus Torvalds
|
4f712ee0cb |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- Changes to FPU handling came in via the main s390 pull request
- Only deliver to the guest the SCLP events that userspace has
requested
- More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same)
- Fix selftests undefined behavior
x86:
- Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can
be programmed *using the architectural encoding*. The enumeration
does NOT say anything about the encoding when the CPU doesn't
report support the event *in general*. It might support it, and it
might support it using the same encoding that made it into the
architectural PMU spec
- Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly
emulates RDMPC, counter availability, and a variety of other
PMC-related behaviors that depend on guest CPUID and therefore are
easier to validate with selftests than with custom guests (aka
kvm-unit-tests)
- Zero out PMU state on AMD if the virtual PMU is disabled, it does
not cause any bug but it wastes time in various cases where KVM
would check if a PMC event needs to be synthesized
- Optimize triggering of emulated events, with a nice ~10%
performance improvement in VM-Exit microbenchmarks when a vPMU is
exposed to the guest
- Tighten the check for "PMI in guest" to reduce false positives if
an NMI arrives in the host while KVM is handling an IRQ VM-Exit
- Fix a bug where KVM would report stale/bogus exit qualification
information when exiting to userspace with an internal error exit
code
- Add a VMX flag in /proc/cpuinfo to report 5-level EPT support
- Rework TDP MMU root unload, free, and alloc to run with mmu_lock
held for read, e.g. to avoid serializing vCPUs when userspace
deletes a memslot
- Tear down TDP MMU page tables at 4KiB granularity (used to be
1GiB). KVM doesn't support yielding in the middle of processing a
zap, and 1GiB granularity resulted in multi-millisecond lags that
are quite impolite for CONFIG_PREEMPT kernels
- Allocate write-tracking metadata on-demand to avoid the memory
overhead when a kernel is built with i915 virtualization support
but the workloads use neither shadow paging nor i915 virtualization
- Explicitly initialize a variety of on-stack variables in the
emulator that triggered KMSAN false positives
- Fix the debugregs ABI for 32-bit KVM
- Rework the "force immediate exit" code so that vendor code
ultimately decides how and when to force the exit, which allowed
some optimization for both Intel and AMD
- Fix a long-standing bug where kvm_has_noapic_vcpu could be left
elevated if vCPU creation ultimately failed, causing extra
unnecessary work
- Cleanup the logic for checking if the currently loaded vCPU is
in-kernel
- Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere
in the kernel) are detected earlier and are less likely to hang the
kernel
x86 Xen emulation:
- Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the gpa
but the underlying host virtual address remains the same
- When possible, use a single host TSC value when computing the
deadline for Xen timers in order to improve the accuracy of the
timer emulation
- Inject pending upcall events when the vCPU software-enables its
APIC to fix a bug where an upcall can be lost (and to follow Xen's
behavior)
- Fall back to the slow path instead of warning if "fast" IRQ
delivery of Xen events fails, e.g. if the guest has aliased xAPIC
IDs
RISC-V:
- Support exception and interrupt handling in selftests
- New self test for RISC-V architectural timer (Sstc extension)
- New extension support (Ztso, Zacas)
- Support userspace emulation of random number seed CSRs
ARM:
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized
to address serialization some of the serialization on the LPI
injection path
- Support for _architectural_ VHE-only systems, advertised through
the absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
- Set reserved bits as zero in CPUCFG
- Start SW timer only when vcpu is blocking
- Do not restart SW timer when it is expired
- Remove unnecessary CSR register saving during enter guest
- Misc cleanups and fixes as usual
Generic:
- Clean up Kconfig by removing CONFIG_HAVE_KVM, which was basically
always true on all architectures except MIPS (where Kconfig
determines the available depending on CPU capabilities). It is
replaced either by an architecture-dependent symbol for MIPS, and
IS_ENABLED(CONFIG_KVM) everywhere else
- Factor common "select" statements in common code instead of
requiring each architecture to specify it
- Remove thoroughly obsolete APIs from the uapi headers
- Move architecture-dependent stuff to uapi/asm/kvm.h
- Always flush the async page fault workqueue when a work item is
being removed, especially during vCPU destruction, to ensure that
there are no workers running in KVM code when all references to
KVM-the-module are gone, i.e. to prevent a very unlikely
use-after-free if kvm.ko is unloaded
- Grab a reference to the VM's mm_struct in the async #PF worker
itself instead of gifting the worker a reference, so that there's
no need to remember to *conditionally* clean up after the worker
Selftests:
- Reduce boilerplate especially when utilize selftest TAP
infrastructure
- Add basic smoke tests for SEV and SEV-ES, along with a pile of
library support for handling private/encrypted/protected memory
- Fix benign bugs where tests neglect to close() guest_memfd files"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
selftests: kvm: remove meaningless assignments in Makefiles
KVM: riscv: selftests: Add Zacas extension to get-reg-list test
RISC-V: KVM: Allow Zacas extension for Guest/VM
KVM: riscv: selftests: Add Ztso extension to get-reg-list test
RISC-V: KVM: Allow Ztso extension for Guest/VM
RISC-V: KVM: Forward SEED CSR access to user space
KVM: riscv: selftests: Add sstc timer test
KVM: riscv: selftests: Change vcpu_has_ext to a common function
KVM: riscv: selftests: Add guest helper to get vcpu id
KVM: riscv: selftests: Add exception handling support
LoongArch: KVM: Remove unnecessary CSR register saving during enter guest
LoongArch: KVM: Do not restart SW timer when it is expired
LoongArch: KVM: Start SW timer only when vcpu is blocking
LoongArch: KVM: Set reserved bits as zero in CPUCFG
KVM: selftests: Explicitly close guest_memfd files in some gmem tests
KVM: x86/xen: fix recursive deadlock in timer injection
KVM: pfncache: simplify locking and make more self-contained
KVM: x86/xen: remove WARN_ON_ONCE() with false positives in evtchn delivery
KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled
KVM: x86/xen: improve accuracy of Xen timers
...
|
||
|
Linus Torvalds
|
902861e34c |
Merge tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
|
||
|
Linus Torvalds
|
216532e147 |
Merge tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As is pretty normal for this tree, there are changes all over the
place, especially for small fixes, selftest improvements, and improved
macro usability.
Some header changes ended up landing via this tree as they depended on
the string header cleanups. Also, a notable set of changes is the work
for the reintroduction of the UBSAN signed integer overflow sanitizer
so that we can continue to make improvements on the compiler side to
make this sanitizer a more viable future security hardening option.
Summary:
- string.h and related header cleanups (Tanzir Hasan, Andy
Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev,
Harshit Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure
(Michael Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob
Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer"
* tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (51 commits)
selftests/powerpc: Fix load_unaligned_zeropad build failure
string: Convert helpers selftest to KUnit
string: Convert selftest to KUnit
sh: Fix build with CONFIG_UBSAN=y
compiler.h: Explain how __is_constexpr() works
overflow: Allow non-type arg to type_max() and type_min()
VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler()
lib/string_helpers: Add flags param to string_get_size()
x86, relocs: Ignore relocations in .notes section
objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
overflow: Use POD in check_shl_overflow()
lib: stackinit: Adjust target string to 8 bytes for m68k
sparc: vdso: Disable UBSAN instrumentation
kernel.h: Move lib/cmdline.c prototypes to string.h
leaking_addresses: Provide mechanism to scan binary files
leaking_addresses: Ignore input device status lines
leaking_addresses: Use File::Temp for /tmp files
MAINTAINERS: Update LEAKING_ADDRESSES details
fortify: Improve buffer overflow reporting
fortify: Add KUnit tests for runtime overflows
...
|
||
|
Linus Torvalds
|
685d982112 |
Merge tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
- The biggest change is the rework of the percpu code, to support the
'Named Address Spaces' GCC feature, by Uros Bizjak:
- This allows C code to access GS and FS segment relative memory
via variables declared with such attributes, which allows the
compiler to better optimize those accesses than the previous
inline assembly code.
- The series also includes a number of micro-optimizations for
various percpu access methods, plus a number of cleanups of %gs
accesses in assembly code.
- These changes have been exposed to linux-next testing for the
last ~5 months, with no known regressions in this area.
- Fix/clean up __switch_to()'s broken but accidentally working handling
of FPU switching - which also generates better code
- Propagate more RIP-relative addressing in assembly code, to generate
slightly better code
- Rework the CPU mitigations Kconfig space to be less idiosyncratic, to
make it easier for distros to follow & maintain these options
- Rework the x86 idle code to cure RCU violations and to clean up the
logic
- Clean up the vDSO Makefile logic
- Misc cleanups and fixes
* tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/idle: Select idle routine only once
x86/idle: Let prefer_mwait_c1_over_halt() return bool
x86/idle: Cleanup idle_setup()
x86/idle: Clean up idle selection
x86/idle: Sanitize X86_BUG_AMD_E400 handling
sched/idle: Conditionally handle tick broadcast in default_idle_call()
x86: Increase brk randomness entropy for 64-bit systems
x86/vdso: Move vDSO to mmap region
x86/vdso/kbuild: Group non-standard build attributes and primary object file rules together
x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o
x86/retpoline: Ensure default return thunk isn't used at runtime
x86/vdso: Use CONFIG_COMPAT_32 to specify vdso32
x86/vdso: Use $(addprefix ) instead of $(foreach )
x86/vdso: Simplify obj-y addition
x86/vdso: Consolidate targets and clean-files
x86/bugs: Rename CONFIG_RETHUNK => CONFIG_MITIGATION_RETHUNK
x86/bugs: Rename CONFIG_CPU_SRSO => CONFIG_MITIGATION_SRSO
x86/bugs: Rename CONFIG_CPU_IBRS_ENTRY => CONFIG_MITIGATION_IBRS_ENTRY
x86/bugs: Rename CONFIG_CPU_UNRET_ENTRY => CONFIG_MITIGATION_UNRET_ENTRY
x86/bugs: Rename CONFIG_SLS => CONFIG_MITIGATION_SLS
...
|
||
|
Linus Torvalds
|
fcc196579a |
Merge tag 'x86-cleanups-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar: "Misc cleanups, including a large series from Thomas Gleixner to cure sparse warnings" * tag 'x86-cleanups-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/nmi: Drop unused declaration of proc_nmi_enabled() x86/callthunks: Use EXPORT_PER_CPU_SYMBOL_GPL() for per CPU variables x86/cpu: Provide a declaration for itlb_multihit_kvm_mitigation x86/cpu: Use EXPORT_PER_CPU_SYMBOL_GPL() for x86_spec_ctrl_current x86/uaccess: Add missing __force to casts in __access_ok() and valid_user_address() x86/percpu: Cure per CPU madness on UP smp: Consolidate smp_prepare_boot_cpu() x86/msr: Add missing __percpu annotations x86/msr: Prepare for including <linux/percpu.h> into <asm/msr.h> perf/x86/amd/uncore: Fix __percpu annotation x86/nmi: Remove an unnecessary IS_ENABLED(CONFIG_SMP) x86/apm_32: Remove dead function apm_get_battery_status() x86/insn-eval: Fix function param name in get_eff_addr_sib() |
||
|
Peter Xu
|
e72c7c2b88 |
mm/treewide: drop pXd_large()
They're not used anymore, drop all of them. Link: https://lkml.kernel.org/r/20240305043750.93762-10-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Muchun Song <muchun.song@linux.dev> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Peter Xu
|
0a845e0f63 |
mm/treewide: replace pud_large() with pud_leaf()
pud_large() is always defined as pud_leaf(). Merge their usages. Chose pud_leaf() because pud_leaf() is a global API, while pud_large() is not. Link: https://lkml.kernel.org/r/20240305043750.93762-9-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Muchun Song <muchun.song@linux.dev> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Peter Xu
|
2f709f7bfd |
mm/treewide: replace pmd_large() with pmd_leaf()
pmd_large() is always defined as pmd_leaf(). Merge their usages. Chose pmd_leaf() because pmd_leaf() is a global API, while pmd_large() is not. Link: https://lkml.kernel.org/r/20240305043750.93762-8-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Muchun Song <muchun.song@linux.dev> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Thomas Gleixner
|
65efc4dc12 |
x86/cpu: Provide a declaration for itlb_multihit_kvm_mitigation
Sparse complains rightfully about the missing declaration which has been placed sloppily into the usage site: bugs.c:2223:6: sparse: warning: symbol 'itlb_multihit_kvm_mitigation' was not declared. Should it be static? Add it to <asm/spec-ctrl.h> where it belongs and remove the one in the KVM code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20240304005104.787173239@linutronix.de |
||
|
Andrei Vagin
|
a364c014a2 |
kvm/x86: allocate the write-tracking metadata on-demand
The write-track is used externally only by the gpu/drm/i915 driver. Currently, it is always enabled, if a kernel has been compiled with this driver. Enabling the write-track mechanism adds a two-byte overhead per page across all memory slots. It isn't significant for regular VMs. However in gVisor, where the entire process virtual address space is mapped into the VM, even with a 39-bit address space, the overhead amounts to 256MB. Rework the write-tracking mechanism to enable it on-demand in kvm_page_track_register_notifier. Here is Sean's comment about the locking scheme: The only potential hiccup would be if taking slots_arch_lock would deadlock, but it should be impossible for slots_arch_lock to be taken in any other path that involves VFIO and/or KVMGT *and* can be coincident. Except for kvm_arch_destroy_vm() (which deletes KVM's internal memslots), slots_arch_lock is taken only through KVM ioctls(), and the caller of kvm_page_track_register_notifier() *must* hold a reference to the VM. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Andrei Vagin <avagin@google.com> Link: https://lore.kernel.org/r/20240213192340.2023366-1-avagin@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
d02c357e5b |
KVM: x86/mmu: Retry fault before acquiring mmu_lock if mapping is changing
Retry page faults without acquiring mmu_lock, and without even faulting the page into the primary MMU, if the resolved gfn is covered by an active invalidation. Contending for mmu_lock is especially problematic on preemptible kernels as the mmu_notifier invalidation task will yield mmu_lock (see rwlock_needbreak()), delay the in-progress invalidation, and ultimately increase the latency of resolving the page fault. And in the worst case scenario, yielding will be accompanied by a remote TLB flush, e.g. if the invalidation covers a large range of memory and vCPUs are accessing addresses that were already zapped. Faulting the page into the primary MMU is similarly problematic, as doing so may acquire locks that need to be taken for the invalidation to complete (the primary MMU has finer grained locks than KVM's MMU), and/or may cause unnecessary churn (getting/putting pages, marking them accessed, etc). Alternatively, the yielding issue could be mitigated by teaching KVM's MMU iterators to perform more work before yielding, but that wouldn't solve the lock contention and would negatively affect scenarios where a vCPU is trying to fault in an address that is NOT covered by the in-progress invalidation. Add a dedicated lockess version of the range-based retry check to avoid false positives on the sanity check on start+end WARN, and so that it's super obvious that checking for a racing invalidation without holding mmu_lock is unsafe (though obviously useful). Wrap mmu_invalidate_in_progress in READ_ONCE() to ensure that pre-checking invalidation in a loop won't put KVM into an infinite loop, e.g. due to caching the in-progress flag and never seeing it go to '0'. Force a load of mmu_invalidate_seq as well, even though it isn't strictly necessary to avoid an infinite loop, as doing so improves the probability that KVM will detect an invalidation that already completed before acquiring mmu_lock and bailing anyways. Do the pre-check even for non-preemptible kernels, as waiting to detect the invalidation until mmu_lock is held guarantees the vCPU will observe the worst case latency in terms of handling the fault, and can generate even more mmu_lock contention. E.g. the vCPU will acquire mmu_lock, detect retry, drop mmu_lock, re-enter the guest, retake the fault, and eventually re-acquire mmu_lock. This behavior is also why there are no new starvation issues due to losing the fairness guarantees provided by rwlocks: if the vCPU needs to retry, it _must_ drop mmu_lock, i.e. waiting on mmu_lock doesn't guarantee forward progress in the face of _another_ mmu_notifier invalidation event. Note, adding READ_ONCE() isn't entirely free, e.g. on x86, the READ_ONCE() may generate a load into a register instead of doing a direct comparison (MOV+TEST+Jcc instead of CMP+Jcc), but practically speaking the added cost is a few bytes of code and maaaaybe a cycle or three. Reported-by: Yan Zhao <yan.y.zhao@intel.com> Closes: https://lore.kernel.org/all/ZNnPF4W26ZbAyGto@yzhao56-desk.sh.intel.com Reported-by: Friedrich Weber <f.weber@proxmox.com> Cc: Kai Huang <kai.huang@intel.com> Cc: Yan Zhao <yan.y.zhao@intel.com> Cc: Yuan Yao <yuan.yao@linux.intel.com> Cc: Xu Yilun <yilun.xu@linux.intel.com> Acked-by: Kai Huang <kai.huang@intel.com> Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Link: https://lore.kernel.org/r/20240222012640.2820927-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
576a15de8d |
KVM: x86/mmu: Free TDP MMU roots while holding mmy_lock for read
Free TDP MMU roots from vCPU context while holding mmu_lock for read, it is completely legal to invoke kvm_tdp_mmu_put_root() as a reader. This eliminates the last mmu_lock writer in the TDP MMU's "fast zap" path after requesting vCPUs to reload roots, i.e. allows KVM to zap invalidated roots, free obsolete roots, and allocate new roots in parallel. On large VMs, e.g. 100+ vCPUs, allowing the bulk of the "fast zap" operation to run in parallel with freeing and allocating roots reduces the worst case latency for a vCPU to reload a root from 2-3ms to <100us. Link: https://lore.kernel.org/r/20240111020048.844847-9-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
dab285e4ec |
KVM: x86/mmu: Alloc TDP MMU roots while holding mmu_lock for read
Allocate TDP MMU roots while holding mmu_lock for read, and instead use tdp_mmu_pages_lock to guard against duplicate roots. This allows KVM to create new roots without forcing kvm_tdp_mmu_zap_invalidated_roots() to yield, e.g. allows vCPUs to load new roots after memslot deletion without forcing the zap thread to detect contention and yield (or complete if the kernel isn't preemptible). Note, creating a new TDP MMU root as an mmu_lock reader is safe for two reasons: (1) paths that must guarantee all roots/SPTEs are *visited* take mmu_lock for write and so are still mutually exclusive, e.g. mmu_notifier invalidations, and (2) paths that require all roots/SPTEs to *observe* some given state without holding mmu_lock for write must ensure freshness through some other means, e.g. toggling dirty logging must first wait for SRCU readers to recognize the memslot flags change before processing existing roots/SPTEs. Link: https://lore.kernel.org/r/20240111020048.844847-8-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
f5238c2a60 |
KVM: x86/mmu: Check for usable TDP MMU root while holding mmu_lock for read
When allocating a new TDP MMU root, check for a usable root while holding mmu_lock for read and only acquire mmu_lock for write if a new root needs to be created. There is no need to serialize other MMU operations if a vCPU is simply grabbing a reference to an existing root, holding mmu_lock for write is "necessary" (spoiler alert, it's not strictly necessary) only to ensure KVM doesn't end up with duplicate roots. Allowing vCPUs to get "new" roots in parallel is beneficial to VM boot and to setups that frequently delete memslots, i.e. which force all vCPUs to reload all roots. Link: https://lore.kernel.org/r/20240111020048.844847-7-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
d746182337 |
KVM: x86/mmu: Skip invalid TDP MMU roots when write-protecting SPTEs
When write-protecting SPTEs, don't process invalid roots as invalid roots are unreachable, i.e. can't be used to access guest memory and thus don't need to be write-protected. Note, this is *almost* a nop for kvm_tdp_mmu_clear_dirty_pt_masked(), which is called under slots_lock, i.e. is mutually exclusive with kvm_mmu_zap_all_fast(). But it's possible for something other than the "fast zap" thread to grab a reference to an invalid root and thus keep a root alive (but completely empty) after kvm_mmu_zap_all_fast() completes. The kvm_tdp_mmu_write_protect_gfn() case is more interesting as KVM write- protects SPTEs for reasons other than dirty logging, e.g. if a KVM creates a SPTE for a nested VM while a fast zap is in-progress. Add another TDP MMU iterator to visit only valid roots, and opportunistically convert kvm_tdp_mmu_get_vcpu_root_hpa() to said iterator. Link: https://lore.kernel.org/r/20240111020048.844847-6-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
99b85fda91 |
KVM: x86/mmu: Skip invalid roots when zapping leaf SPTEs for GFN range
When zapping a GFN in response to an APICv or MTRR change, don't zap SPTEs for invalid roots as KVM only needs to ensure the guest can't use stale mappings for the GFN. Unlike kvm_tdp_mmu_unmap_gfn_range(), which must zap "unreachable" SPTEs to ensure KVM doesn't mark a page accessed/dirty, kvm_tdp_mmu_zap_leafs() isn't used (and isn't intended to be used) to handle freeing of host memory. Link: https://lore.kernel.org/r/20240111020048.844847-5-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
6577f1efdf |
KVM: x86/mmu: Allow passing '-1' for "all" as_id for TDP MMU iterators
Modify for_each_tdp_mmu_root() and __for_each_tdp_mmu_root_yield_safe() to accept -1 for _as_id to mean "process all memslot address spaces". That way code that wants to process both SMM and !SMM doesn't need to iterate over roots twice (and likely copy+paste code in the process). Deliberately don't cast _as_id to an "int", just in case not casting helps the compiler elide the "_as_id >=0" check when being passed an unsigned value, e.g. from a memslot. No functional change intended. Link: https://lore.kernel.org/r/20240111020048.844847-4-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
fcdffe97f8 |
KVM: x86/mmu: Don't do TLB flush when zappings SPTEs in invalid roots
Don't force a TLB flush when zapping SPTEs in invalid roots as vCPUs can't be actively using invalid roots (zapping SPTEs in invalid roots is necessary only to ensure KVM doesn't mark a page accessed/dirty after it is freed by the primary MMU). Link: https://lore.kernel.org/r/20240111020048.844847-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
8ca983631f |
KVM: x86/mmu: Zap invalidated TDP MMU roots at 4KiB granularity
Zap invalidated TDP MMU roots at maximum granularity, i.e. with more frequent conditional resched checkpoints, in order to avoid running for an extended duration (milliseconds, or worse) without honoring a reschedule request. And for kernels running with full or real-time preempt models, zapping at 4KiB granularity also provides significantly reduced latency for other tasks that are contending for mmu_lock (which isn't necessarily an overall win for KVM, but KVM should do its best to honor the kernel's preemption model). To keep KVM's assertion that zapping at 1GiB granularity is functionally ok, which is the main reason 1GiB was selected in the past, skip straight to zapping at 1GiB if KVM is configured to prove the MMU. Zapping roots is far more common than a vCPU replacing a 1GiB page table with a hugepage, e.g. generally happens multiple times during boot, and so keeping the test coverage provided by root zaps is desirable, just not for production. Cc: David Matlack <dmatlack@google.com> Cc: Pattara Teerapong <pteerapong@google.com> Link: https://lore.kernel.org/r/20240111020048.844847-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Ingo Molnar
|
4589f199eb |
Merge branch 'x86/bugs' into x86/core, to pick up pending changes before dependent patches
Merge in pending alternatives patching infrastructure changes, before applying more patches. Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Tanzir Hasan
|
66a5c40f60 |
kernel.h: removed REPEAT_BYTE from kernel.h
This patch creates wordpart.h and includes it in asm/word-at-a-time.h for all architectures. WORD_AT_A_TIME_CONSTANTS depends on kernel.h because of REPEAT_BYTE. Moving this to another header and including it where necessary allows us to not include the bloated kernel.h. Making this implicit dependency on REPEAT_BYTE explicit allows for later improvements in the lib/string.c inclusion list. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Tanzir Hasan <tanzirh@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20231226-libstringheader-v6-1-80aa08c7652c@google.com Signed-off-by: Kees Cook <keescook@chromium.org> |
||
|
Kunwu Chan
|
0dbd054699 |
KVM: x86/mmu: Use KMEM_CACHE instead of kmem_cache_create()
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create to simplify the creation of SLAB caches. Note, KMEM_CACHE() uses the required alignment of the struct, '8' as the alignment, whereas KVM's existing code passes '0'. In the end, the two values yield the same result as x86's minimum slab alignment is also '8' (which is not at all coincidental). Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Link: https://lore.kernel.org/r/20240116100025.95702-1-chentao@kylinos.cn [sean: call out alignment behavior] Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Linus Torvalds
|
09d1c6a80f |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
|
||
|
Breno Leitao
|
aefb2f2e61 |
x86/bugs: Rename CONFIG_RETPOLINE => CONFIG_MITIGATION_RETPOLINE
Step 5/10 of the namespace unification of CPU mitigations related Kconfig options. [ mingo: Converted a few more uses in comments/messages as well. ] Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Ariel Miculas <amiculas@cisco.com> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20231121160740.1249350-6-leitao@debian.org |
||
|
Paolo Bonzini
|
7f26fea9bc |
Merge tag 'kvm-x86-mmu-6.8' of https://github.com/kvm-x86/linux into HEAD
KVM x86 MMU changes for 6.8: - Fix a relatively benign off-by-one error when splitting huge pages during CLEAR_DIRTY_LOG. - Fix a bug where KVM could incorrectly test-and-clear dirty bits in non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with a non-huge SPTE. - Relax the TDP MMU's lockdep assertions related to holding mmu_lock for read versus write so that KVM doesn't pass "bool shared" all over the place just to have precise assertions in paths that don't actually care about whether the caller is a reader or a writer. |
||
|
Paolo Bonzini
|
8ecb10bcbf |
Merge tag 'kvm-x86-lam-6.8' of https://github.com/kvm-x86/linux into HEAD
KVM x86 support for virtualizing Linear Address Masking (LAM)
Add KVM support for Linear Address Masking (LAM). LAM tweaks the canonicality
checks for most virtual address usage in 64-bit mode, such that only the most
significant bit of the untranslated address bits must match the polarity of the
last translated address bit. This allows software to use ignored, untranslated
address bits for metadata, e.g. to efficiently tag pointers for address
sanitization.
LAM can be enabled separately for user pointers and supervisor pointers, and
for userspace LAM can be select between 48-bit and 57-bit masking
- 48-bit LAM: metadata bits 62:48, i.e. LAM width of 15.
- 57-bit LAM: metadata bits 62:57, i.e. LAM width of 6.
For user pointers, LAM enabling utilizes two previously-reserved high bits from
CR3 (similar to how PCID_NOFLUSH uses bit 63): LAM_U48 and LAM_U57, bits 62 and
61 respectively. Note, if LAM_57 is set, LAM_U48 is ignored, i.e.:
- CR3.LAM_U48=0 && CR3.LAM_U57=0 == LAM disabled for user pointers
- CR3.LAM_U48=1 && CR3.LAM_U57=0 == LAM-48 enabled for user pointers
- CR3.LAM_U48=x && CR3.LAM_U57=1 == LAM-57 enabled for user pointers
For supervisor pointers, LAM is controlled by a single bit, CR4.LAM_SUP, with
the 48-bit versus 57-bit LAM behavior following the current paging mode, i.e.:
- CR4.LAM_SUP=0 && CR4.LA57=x == LAM disabled for supervisor pointers
- CR4.LAM_SUP=1 && CR4.LA57=0 == LAM-48 enabled for supervisor pointers
- CR4.LAM_SUP=1 && CR4.LA57=1 == LAM-57 enabled for supervisor pointers
The modified LAM canonicality checks:
- LAM_S48 : [ 1 ][ metadata ][ 1 ]
63 47
- LAM_U48 : [ 0 ][ metadata ][ 0 ]
63 47
- LAM_S57 : [ 1 ][ metadata ][ 1 ]
63 56
- LAM_U57 + 5-lvl paging : [ 0 ][ metadata ][ 0 ]
63 56
- LAM_U57 + 4-lvl paging : [ 0 ][ metadata ][ 0...0 ]
63 56..47
The bulk of KVM support for LAM is to emulate LAM's modified canonicality
checks. The approach taken by KVM is to "fill" the metadata bits using the
highest bit of the translated address, e.g. for LAM-48, bit 47 is sign-extended
to bits 62:48. The most significant bit, 63, is *not* modified, i.e. its value
from the raw, untagged virtual address is kept for the canonicality check. This
untagging allows
Aside from emulating LAM's canonical checks behavior, LAM has the usual KVM
touchpoints for selectable features: enumeration (CPUID.7.1:EAX.LAM[bit 26],
enabling via CR3 and CR4 bits, etc.
|
||
|
Bjorn Helgaas
|
54aa699e80 |
arch/x86: Fix typos
Fix typos, most reported by "codespell arch/x86". Only touches comments, no code changes. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20240103004011.1758650-1-helgaas@kernel.org |
||
|
Paolo Bonzini
|
e59f75de4e |
KVM: x86/mmu: fix comment about mmu_unsync_pages_lock
Fix the comment about what can and cannot happen when mmu_unsync_pages_lock is not help. The comment correctly mentions "clearing sp->unsync", but then it talks about unsync going from 0 to 1. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lore.kernel.org/r/20231125083400.1399197-5-pbonzini@redhat.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Paolo Bonzini
|
250ce1b4d2 |
KVM: x86/mmu: always take tdp_mmu_pages_lock
It is cheap to take tdp_mmu_pages_lock in all write-side critical sections. We already do it all the time when zapping with read_lock(), so it is not a problem to do it from the kvm_tdp_mmu_zap_all() path (aka kvm_arch_flush_shadow_all(), aka VM destruction and MMU notifier release). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lore.kernel.org/r/20231125083400.1399197-4-pbonzini@redhat.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Paolo Bonzini
|
484dd27c06 |
KVM: x86/mmu: remove unnecessary "bool shared" argument from iterators
The "bool shared" argument is more or less unnecessary in the for_each_*_tdp_mmu_root_yield_safe() macros. Many users check for the lock before calling it; all of them either call small functions that do the check, or end up calling tdp_mmu_set_spte_atomic() and tdp_mmu_iter_set_spte(). Add a few assertions to make up for the lost check in for_each_*_tdp_mmu_root_yield_safe(), but even this is probably overkill and mostly for documentation reasons. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lore.kernel.org/r/20231125083400.1399197-3-pbonzini@redhat.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Paolo Bonzini
|
5f3c8c9187 |
KVM: x86/mmu: remove unnecessary "bool shared" argument from functions
Neither tdp_mmu_next_root nor kvm_tdp_mmu_put_root need to know if the lock is taken for read or write. Either way, protection is achieved via RCU and tdp_mmu_pages_lock. Remove the argument and just assert that the lock is taken. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lore.kernel.org/r/20231125083400.1399197-2-pbonzini@redhat.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
David Matlack
|
45a61ebb22 |
KVM: x86/mmu: Check for leaf SPTE when clearing dirty bit in the TDP MMU
Re-check that the given SPTE is still a leaf and present SPTE after a failed cmpxchg in clear_dirty_gfn_range(). clear_dirty_gfn_range() intends to only operate on present leaf SPTEs, but that could change after a failed cmpxchg. A check for present was added in commit |
||
|
David Matlack
|
1aa4bb9168 |
KVM: x86/mmu: Fix off-by-1 when splitting huge pages during CLEAR
Fix an off-by-1 error when passing in the range of pages to
kvm_mmu_try_split_huge_pages() during CLEAR_DIRTY_LOG. Specifically, end
is the last page that needs to be split (inclusive) so pass in `end + 1`
since kvm_mmu_try_split_huge_pages() expects the `end` to be
non-inclusive.
At worst this will cause a huge page to be write-protected instead of
eagerly split, which is purely a performance issue, not a correctness
issue. But even that is unlikely as it would require userspace pass in a
bitmap where the last page is the only 4K page on a huge page that needs
to be split.
Reported-by: Vipin Sharma <vipinsh@google.com>
Fixes:
|
||
|
Sean Christopherson
|
0277022a77 |
KVM: x86/mmu: Declare flush_remote_tlbs{_range}() hooks iff HYPERV!=n
Declare the kvm_x86_ops hooks used to wire up paravirt TLB flushes when running under Hyper-V if and only if CONFIG_HYPERV!=n. Wrapping yet more code with IS_ENABLED(CONFIG_HYPERV) eliminates a handful of conditional branches, and makes it super obvious why the hooks *might* be valid. Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/20231018192325.1893896-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Binbin Wu
|
a130066f74 |
KVM: x86/mmu: Drop non-PA bits when getting GFN for guest's PGD
Drop non-PA bits when getting GFN for guest's PGD with the maximum theoretical mask for guest MAXPHYADDR. Do it unconditionally because it's harmless for 32-bit guests, querying 64-bit mode would be more expensive, and for EPT the mask isn't tied to guest mode. Using PT_BASE_ADDR_MASK would be technically wrong (PAE paging has 64-bit elements _except_ for CR3, which has only 32 valid bits), it wouldn't matter in practice though. Opportunistically use GENMASK_ULL() to define __PT_BASE_ADDR_MASK. Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com> Tested-by: Xuelian Guo <xuelian.guo@intel.com> Link: https://lore.kernel.org/r/20230913124227.12574-6-binbin.wu@linux.intel.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Paolo Bonzini
|
6c370dc653 |
Merge branch 'kvm-guestmemfd' into HEAD
Introduce several new KVM uAPIs to ultimately create a guest-first memory
subsystem within KVM, a.k.a. guest_memfd. Guest-first memory allows KVM
to provide features, enhancements, and optimizations that are kludgly
or outright impossible to implement in a generic memory subsystem.
The core KVM ioctl() for guest_memfd is KVM_CREATE_GUEST_MEMFD, which
similar to the generic memfd_create(), creates an anonymous file and
returns a file descriptor that refers to it. Again like "regular"
memfd files, guest_memfd files live in RAM, have volatile storage,
and are automatically released when the last reference is dropped.
The key differences between memfd files (and every other memory subystem)
is that guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
convert a guest memory area between the shared and guest-private states.
A second KVM ioctl(), KVM_SET_MEMORY_ATTRIBUTES, allows userspace to
specify attributes for a given page of guest memory. In the long term,
it will likely be extended to allow userspace to specify per-gfn RWX
protections, including allowing memory to be writable in the guest
without it also being writable in host userspace.
The immediate and driving use case for guest_memfd are Confidential
(CoCo) VMs, specifically AMD's SEV-SNP, Intel's TDX, and KVM's own pKVM.
For such use cases, being able to map memory into KVM guests without
requiring said memory to be mapped into the host is a hard requirement.
While SEV+ and TDX prevent untrusted software from reading guest private
data by encrypting guest memory, pKVM provides confidentiality and
integrity *without* relying on memory encryption. In addition, with
SEV-SNP and especially TDX, accessing guest private memory can be fatal
to the host, i.e. KVM must be prevent host userspace from accessing
guest memory irrespective of hardware behavior.
Long term, guest_memfd may be useful for use cases beyond CoCo VMs,
for example hardening userspace against unintentional accesses to guest
memory. As mentioned earlier, KVM's ABI uses userspace VMA protections to
define the allow guest protection (with an exception granted to mapping
guest memory executable), and similarly KVM currently requires the guest
mapping size to be a strict subset of the host userspace mapping size.
Decoupling the mappings sizes would allow userspace to precisely map
only what is needed and with the required permissions, without impacting
guest performance.
A guest-first memory subsystem also provides clearer line of sight to
things like a dedicated memory pool (for slice-of-hardware VMs) and
elimination of "struct page" (for offload setups where userspace _never_
needs to DMA from or into guest memory).
guest_memfd is the result of 3+ years of development and exploration;
taking on memory management responsibilities in KVM was not the first,
second, or even third choice for supporting CoCo VMs. But after many
failed attempts to avoid KVM-specific backing memory, and looking at
where things ended up, it is quite clear that of all approaches tried,
guest_memfd is the simplest, most robust, and most extensible, and the
right thing to do for KVM and the kernel at-large.
The "development cycle" for this version is going to be very short;
ideally, next week I will merge it as is in kvm/next, taking this through
the KVM tree for 6.8 immediately after the end of the merge window.
The series is still based on 6.6 (plus KVM changes for 6.7) so it
will require a small fixup for changes to get_file_rcu() introduced in
6.7 by commit
|
||
|
Sean Christopherson
|
89ea60c2c7 |
KVM: x86: Add support for "protected VMs" that can utilize private memory
Add a new x86 VM type, KVM_X86_SW_PROTECTED_VM, to serve as a development and testing vehicle for Confidential (CoCo) VMs, and potentially to even become a "real" product in the distant future, e.g. a la pKVM. The private memory support in KVM x86 is aimed at AMD's SEV-SNP and Intel's TDX, but those technologies are extremely complex (understatement), difficult to debug, don't support running as nested guests, and require hardware that's isn't universally accessible. I.e. relying SEV-SNP or TDX for maintaining guest private memory isn't a realistic option. At the very least, KVM_X86_SW_PROTECTED_VM will enable a variety of selftests for guest_memfd and private memory support without requiring unique hardware. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20231027182217.3615211-24-seanjc@google.com> Reviewed-by: Fuad Tabba <tabba@google.com> Tested-by: Fuad Tabba <tabba@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
eed52e434b |
KVM: Allow arch code to track number of memslot address spaces per VM
Let x86 track the number of address spaces on a per-VM basis so that KVM can disallow SMM memslots for confidential VMs. Confidentials VMs are fundamentally incompatible with emulating SMM, which as the name suggests requires being able to read and write guest memory and register state. Disallowing SMM will simplify support for guest private memory, as KVM will not need to worry about tracking memory attributes for multiple address spaces (SMM is the only "non-default" address space across all architectures). Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fuad Tabba <tabba@google.com> Tested-by: Fuad Tabba <tabba@google.com> Message-Id: <20231027182217.3615211-23-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Chao Peng
|
8dd2eee9d5 |
KVM: x86/mmu: Handle page fault for private memory
Add support for resolving page faults on guest private memory for VMs that differentiate between "shared" and "private" memory. For such VMs, KVM_MEM_GUEST_MEMFD memslots can include both fd-based private memory and hva-based shared memory, and KVM needs to map in the "correct" variant, i.e. KVM needs to map the gfn shared/private as appropriate based on the current state of the gfn's KVM_MEMORY_ATTRIBUTE_PRIVATE flag. For AMD's SEV-SNP and Intel's TDX, the guest effectively gets to request shared vs. private via a bit in the guest page tables, i.e. what the guest wants may conflict with the current memory attributes. To support such "implicit" conversion requests, exit to user with KVM_EXIT_MEMORY_FAULT to forward the request to userspace. Add a new flag for memory faults, KVM_MEMORY_EXIT_FLAG_PRIVATE, to communicate whether the guest wants to map memory as shared vs. private. Like KVM_MEMORY_ATTRIBUTE_PRIVATE, use bit 3 for flagging private memory so that KVM can use bits 0-2 for capturing RWX behavior if/when userspace needs such information, e.g. a likely user of KVM_EXIT_MEMORY_FAULT is to exit on missing mappings when handling guest page fault VM-Exits. In that case, userspace will want to know RWX information in order to correctly/precisely resolve the fault. Note, private memory *must* be backed by guest_memfd, i.e. shared mappings always come from the host userspace page tables, and private mappings always come from a guest_memfd instance. Co-developed-by: Yu Zhang <yu.c.zhang@linux.intel.com> Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com> Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Fuad Tabba <tabba@google.com> Tested-by: Fuad Tabba <tabba@google.com> Message-Id: <20231027182217.3615211-21-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Chao Peng
|
90b4fe1798 |
KVM: x86: Disallow hugepages when memory attributes are mixed
Disallow creating hugepages with mixed memory attributes, e.g. shared versus private, as mapping a hugepage in this case would allow the guest to access memory with the wrong attributes, e.g. overlaying private memory with a shared hugepage. Tracking whether or not attributes are mixed via the existing disallow_lpage field, but use the most significant bit in 'disallow_lpage' to indicate a hugepage has mixed attributes instead using the normal refcounting. Whether or not attributes are mixed is binary; either they are or they aren't. Attempting to squeeze that info into the refcount is unnecessarily complex as it would require knowing the previous state of the mixed count when updating attributes. Using a flag means KVM just needs to ensure the current status is reflected in the memslots. Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20231027182217.3615211-20-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Chao Peng
|
8569992d64 |
KVM: Use gfn instead of hva for mmu_notifier_retry
Currently in mmu_notifier invalidate path, hva range is recorded and then checked against by mmu_invalidate_retry_hva() in the page fault handling path. However, for the soon-to-be-introduced private memory, a page fault may not have a hva associated, checking gfn(gpa) makes more sense. For existing hva based shared memory, gfn is expected to also work. The only downside is when aliasing multiple gfns to a single hva, the current algorithm of checking multiple ranges could result in a much larger range being rejected. Such aliasing should be uncommon, so the impact is expected small. Suggested-by: Sean Christopherson <seanjc@google.com> Cc: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> Reviewed-by: Fuad Tabba <tabba@google.com> Tested-by: Fuad Tabba <tabba@google.com> [sean: convert vmx_set_apic_access_page_addr() to gfn-based API] Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Xu Yilun <yilun.xu@linux.intel.com> Message-Id: <20231027182217.3615211-4-seanjc@google.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Linus Torvalds
|
ecae0bd517 |
Merge tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
|
||
|
Li zeming
|
1de9992f9d |
KVM: x86/mmu: Remove unnecessary ‘NULL’ values from sptep
Don't initialize "spte" and "sptep" in fast_page_fault() as they are both guaranteed (for all intents and purposes) to be written at the start of every loop iteration. Add a sanity check that "sptep" is non-NULL after walking the shadow page tables, as encountering a NULL root would result in "spte" not being written, i.e. would lead to uninitialized data or the previous value being consumed. Signed-off-by: Li zeming <zeming@nfschina.com> Link: https://lore.kernel.org/r/20230905182006.2964-1-zeming@nfschina.com [sean: rewrite changelog with --verbose] Signed-off-by: Sean Christopherson <seanjc@google.com> |