When both PCI and OF are disabled, no drivers are registered, and
we get some unused-function warnings:
drivers/crypto/inside-secure/safexcel.c:1221:13: error: unused function 'safexcel_unregister_algorithms' [-Werror,-Wunused-function]
static void safexcel_unregister_algorithms(struct safexcel_crypto_priv *priv)
drivers/crypto/inside-secure/safexcel.c:1307:12: error: unused function 'safexcel_probe_generic' [-Werror,-Wunused-function]
static int safexcel_probe_generic(void *pdev,
drivers/crypto/inside-secure/safexcel.c:1531:13: error: unused function 'safexcel_hw_reset_rings' [-Werror,-Wunused-function]
static void safexcel_hw_reset_rings(struct safexcel_crypto_priv *priv)
It's better to make the compiler see what is going on and remove
such ifdef checks completely. In case of PCI, this is trivial since
pci_register_driver() is defined to an empty function that makes the
compiler subsequently drop all unused code silently.
The global pcireg_rc/ofreg_rc variables are not actually needed here
since the driver registration does not fail in ways that would make
it helpful.
For CONFIG_OF, an IS_ENABLED() check is still required, since platform
drivers can exist both with and without it.
A little change to linux/pci.h is needed to ensure that
pcim_enable_device() is visible to the driver. Moving the declaration
outside of ifdef would be sufficient here, but for consistency with the
rest of the file, adding an inline helper is probably best.
Fixes: 212ef6f29e ("crypto: inside-secure - Fix unused variable warning when CONFIG_PCI=n")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci.h
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A previous fixup avoided an unused variable warning but replaced
it with a slightly scarier warning:
drivers/crypto/inside-secure/safexcel.c:1100:6: error: variable 'irq' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
This is harmless as it is impossible to get into this case, but
the compiler has no way of knowing that. Add an explicit error
handling case to make it obvious to both compilers and humans
reading the source.
Fixes: 212ef6f29e ("crypto: inside-secure - Fix unused variable warning when CONFIG_PCI=n")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
HiSilicon HPRE engine driver uses debugfs to provide debug information,
the usage can be found in /Documentation/ABI/testing/debugfs-hisi-hpre.
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
HiSilicon HPRE engine supports PCI SRIOV. This patch enable
this feature. User can enable VFs and pass through them to VM,
same HPRE driver can work in VM to provide RSA and DH algorithms
by crypto akcipher and kpp interfaces.
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Hui tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The HiSilicon HPRE accelerator implements RSA and DH algorithms. It
uses Hisilicon QM as interface to CPU.
This patch provides PCIe driver to the accelerator and registers its
algorithms to crypto akcipher and kpp interfaces.
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As HW SGL can be seen as a data format of QM's sqe, we merge sgl code into
qm module and rename it as hisi_qm, which reduces the number of module and
make the name less generic.
This patch also modify the interface of SGL:
- Create/free hisi_acc_sgl_pool inside.
- Let user to pass the SGE number in one SGL when creating sgl pool, which
is better than a unified module parameter for sgl module before.
- Modify zip driver according to sgl interface change.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
TLS "record layer offload" requires TOE, and bypasses most of
the normal networking stack. It is also significantly less
maintained. Allow users to compile it out to avoid issues.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mapped_{src,dst}_nents _returned_ from the dma_map_sg
call (which could be less than src/dst_nents) have to be
used to generate the job descriptors.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch enables power management on the Security System.
sun4i-ss now depends on PM because it simplify code and prevent some ifdef.
But this is not a problem since arch maintainer want ARCH_SUNXI to
depend on PM in the future.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch regroups resource enabling/disabling in dedicated function.
This simplify error handling and will permit to support power
management.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Set the CRYPTO_ALG_KERN_DRIVER_ONLY flag to all algorithms exposed by
the qce driver, since they are all hardware accelerated, accessible
through a kernel driver only, and not available directly to userspace.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Release all allocated memory if sha type is invalid:
In ccp_run_sha_cmd, if the type of sha is invalid, the allocated
hmac_buf should be released.
v2: fix the goto.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To avoid missing arm64 specific warnings that get introduced
in this driver, allow compile-testing on all 64-bit architectures.
The only actual arm64 specific code in this driver is an open-
coded 128 bit MMIO write. On non-arm64 the same can be done
using memcpy_toio. What I also noticed is that the mmio store
(either one) is not endian-safe, this will only work on little-
endian configurations, so I also add a Kconfig dependency on
that, regardless of the architecture.
Finally, a depenndecy on CONFIG_64BIT is needed because of the
writeq().
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the EIP196, which is an EIP197 derivative
that has no classification hardware and a simplified record cache.
The patch has been tested with the eip196b-ie and eip197c-iewxkbc
configurations on the Xilinx VCU118 development board as well as on the
Macchiatobin board (Marvell A8K - EIP197b-ieswx), including the crypto
extra tests.
Note that this patchset applies on top of the earlier submitted
"Add support for eip197f_iewc" series.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current driver assumes one dedicated ring interrupt controller per
ring. However, some existing EIP(1)97 HW has less ring AIC's than rings.
This patch allows the driver to work with such HW by detecting how many
ring AIC's are present and restricting the number of rings it *uses* by
the number of ring AIC's present. This allows it to at least function.
(optimization for the future: add ring dispatch functionality in the
interrupt service routine such that multiple rings can be supported from
one ring AIC, allowing all rings to be used)
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for large EIP197's with a 256 bit wide internal
bus, which affects the format of the result descriptor due to internal
alignment requirements.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixed a corner case admin RAM probing issue witnessed on the
Xilinx VCU118 FPGA development board with an EIP197 configuration with
4096 words of admin RAM, of which only 2050 were recognised.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch corrects an error in the Transform Record Cache initialization
code that was causing intermittent stability problems on the Macchiatobin
board.
Unfortunately, due to HW platform specifics, the problem could not happen
on the main development platform, being the VCU118 Xilinx development
board. And since it was a problem with hash table access, it was very
dependent on the actual physical context record DMA buffers being used,
i.e. with some (bad) luck it could seemingly work quit stable for a while.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Self test failures are due to wrong output IV. This patch fixes this
issue by copying back output IV into skcipher request.
Signed-off-by: Nagadheeraj Rottela <rnagadheeraj@marvell.com>
Reviewed-by: Srikanth Jampala <jsrikanth@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the authenc(hmac(sha224),cbc(des)),
authenc(hmac(sha256),cbc(des)), authenc(hmac(sha384),cbc(des))
and authenc(hmac(sha512),cbc(des)) aead's
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the authenc(hmac(sha224),cbc(des3_ede)),
authenc(hmac(sha256),cbc(des3_ede)), authenc(hmac(sha384),cbc(des3_ede))
and authenc(hmac(sha512),cbc(des3_ede)) aead's
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the authenc(hmac(sha1),cbc(des)) aead
changes since v1:
- rebased on top of DES changes made to cryptodev/master
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Due to the addition of SHA3 and HMAC-SHA3 support to the inside-secure
driver, it now depends on CRYPTO_SHA3. Added reference.
changes since v1:
- added missing dependency to crypto/Kconfig
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for hmac(sha3-224), hmac(sha3-256), hmac(sha3-384)
and hmac(sha3-512) authentication algorithms.
The patch has been tested with the eip197c_iewxkbc configuration on the
Xilinx VCU118 development board, including the testmgr extra tests.
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for sha3-224, sha3-256, sha3-384 and sha3-512
basic hashes.
The patch has been tested with the eip197c_iewxkbc configuration on the
Xilinx VCU118 development board, including the testmgr extra tests.
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the authenc(hmac(sha1),cbc(sm4)),
authenc(hmac(sm3),cbc(sm4)), authenc(hmac(sha1),rfc3686(ctr(sm4))),
and authenc(hmac(sm3),rfc3686(ctr(sm4))) aead ciphersuites.
These are necessary to support IPsec according to the Chinese standard
GM/T 022-1014 - IPsec VPN specification.
Note that there are no testvectors present in testmgr for these
ciphersuites. However, considering all building blocks have already been
verified elsewhere, it is fair to assume the generic implementation to be
correct-by-construction.
The hardware implementation has been fuzzed against this generic
implementation by means of a locally modified testmgr. The intention is
to upstream these testmgr changes but this is pending other testmgr changes
being made by Eric Biggers.
The patch has been tested with the eip197c_iewxkbc configuration on the
Xilinx VCU118 development board, using the abovementioned modified testmgr
This patch applies on top of "Add support for SM4 ciphers" and needs to
be applied before "Add (HMAC) SHA3 support".
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for SM4 in (32 bit) CTR mode, i.e. skcipher
rfc3686(ctr(sm4)).
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for SM4 in CFB mode, i.e. skcipher cfb(sm4).
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for SM4 in OFB mode, i.e. skcipher ofb(sm4).
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for SM4 in CBC mode, i.e. skcipher cbc(sm4).
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for SM4 in ECB mode, i.e. skcipher ecb(sm4).
changes since v1:
- make SAFEXCEL_SM4 case entry explit, using the proper SM4_BLOCK_SIZE
instead of "borrowing" the AES code which "coincidentally" works
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added support for the hmac(sm3) ahash authentication algorithm
changes since v1:
- added Acked-by tag below, no changes to the source
changes since v2:
- nothing
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added support for the SM3 ahash algorithm
changes since v1:
- moved definition of CONTEXT_CONTROL_CRYPTO_ALG_SM3 (0x7) up above 0xf
changes since v2:
- allow compilation if CONFIG_CRYPTO_SM3 is not set
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Due to the addition of Chacha20-Poly1305 support to the inside-secure
driver, it now depends on CRYPTO_CHACHA20POLY1305. Added reference.
changes since v1:
- added missing dependency to crypto/Kconfig
changes since v2:
- nothing
changes since v3:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the Chacha20-Poly1305 cipher suite.
It adds both the basic rfc7539(chacha20,poly1305) as well as the
rfc7539esp(chacha20,poly1305) variant for IPsec ESP acceleration.
changes since v1:
- rebased on top of DES library changes done on cryptodev/master
- fixed crypto/Kconfig so that generic fallback is compiled as well
changes since v2:
- nothing
changes since v3:
- Fixed a problem where the tcrypt performance test would run fully on the
fallback cipher instead of the HW due to using an AAD length of 8 for
rfc7539esp. While this is not actually legal ESP (which includes SPI and
sequence number in the AAD as well), it is both inconvenient and not
necessary to run these vectors on the fallback cipher.
- Due to above, also realised that for plain (non-ESP) rfc7539, you
probably want to be able to run vectors with less than 8 bytes of AAD
on the HW, and this is actually possible as long as cryptlen is large
enough, so made that possible as well.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added support for the CHACHA20 skcipher algorithm.
Tested on an eip197c-iesb configuration in the Xilinx VCU118 devboard,
passes all testmgr vectors plus the extra fuzzing tests.
changes since v1:
- rebased on top of DES library changes done on cryptodev/master
- fixed crypto/Kconfig so that generic fallback is compiled as well
changes since v2:
- made switch entry SAFEXCEL_AES explit and added empty default, as
requested by Antoine Tenart. Also needed to make SM4 patches apply.
changes since v3:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When VMAP_STACK is selected, stack cannot be DMA-mapped.
Therefore, the hash result has to be DMA-mapped in the request
context and copied into areq->result at completion.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
