gcc with W=1 reports
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_resource.c:1069:43: error:
‘res_create_maximus_funcs’ defined but not used [-Werror=unused-const-variable=]
1069 | static const struct resource_create_funcs res_create_maximus_funcs = {
| ^~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_resource.c:727:38: error:
‘debug_defaults_diags’ defined but not used [-Werror=unused-const-variable=]
727 | static const struct dc_debug_options debug_defaults_diags = {
| ^~~~~~~~~~~~~~~~~~~~
These variables are not used so remove them.
Fixes: 25879d7b49 ("drm/amd/display: Clean FPGA code in dc")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently, there is an intermittent issue where a screen can either go
blank or be corrupted.
[HOW]
To resolve the issue we trigger the ramping logic for DIO FIFO so that
it goes back up to the correct speed.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Saaem Rizvi <syedsaaem.rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Updates to unbounded requesting should not be conditional
on updates to dlg / ttu, as this could prevent unbounded
requesting from being updated if dlg / ttu does not change
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why && How]
We would like to have visual confirm color support for MCLK switch.
1. Set visual confirm color to yellow: Vblank MCLK switch.
2. Set visual confirm color to cyan: FPO + Vblank MCLK
switch.
3. Set visual confirm color to pink: Vactive MCLK switch.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It is possible to commit state multiple times in rapid succession with
FAMS enabled; if each of these commits were to set optimized_required,
then the user may see latency.
[HOW]
fw_based_mclk_switching is currently not used in dc->clk_mgr; use it
to track whether the current state has FAMS enabled;
if it has, then do not disable FAMS in prepare_bandwidth, and do not set
optimized_required.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a
pipe commit can cause underflow.
[HOW]
Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets
optimized_required.
This change expects that Freesync requests are blocked when
optimized_required is true.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Flickering and underflow was observed when testing extended
blank on dcn314.
[What]
Vstartup is contrainted by vblank_nom, so adjusting it to include
non-adjusted vtotal in its calculation during freesync video
means that Vstartup is not changed when vtotal changes.
This fixed the flickering + underflow.
dc_extended_blank_supported function was removed
because extended blank is only relevant to when
zstate is supported. The increased vtotal during
freesync can be passed to dml regardless of whether
extended blank is supported or not, so this function is
not needed.
Updates were made recently in dml to the calculation of
min_dst_y_next_start. Dml input for dcn314 will now
always use the newer calculation for min_dst_y_next_start.
Dml input for older dcn versions remains untouched.
The variable optimized_min_dst_y_next_start
is replaced everywhere with min_dst_y_next_start,
and the updated dml allows min_dst_y_next_start to
increase to an optimized value during freesync video,
then return to default when freesync is disengaged.
Also removed registry key for controlling
extended blank feature.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Doing core_link_disable_stream or set_dpms_off when reinitializing
hardware causes issue to repro with external display connected. This is
unnecessary, blanking pixel data should be sufficient.
[How]
Call disable_pixel_data while reinitializing hardware instead of
core_link_disable_stream or set_dpms_off.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Michael Mityushkin <michael.mityushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It is possible to commit state multiple times in rapid succession with
FAMS enabled; if each of these commits were to set optimized_required,
then the user may see latency.
[HOW]
fw_based_mclk_switching is currently not used in dc->clk_mgr; use it
to track whether the current state has FAMS enabled;
if it has, then do not disable FAMS in prepare_bandwidth, and do not set
optimized_required.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a
pipe commit can cause underflow.
[HOW]
Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets
optimized_required.
This change expects that Freesync requests are blocked when
optimized_required is true.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
* Pass in pipe index for FPO cmd to DMCUB
- This change will pass in the pipe index for each stream
that is using FPO
- This change is in preparation to enable FPO + VActive
* Use per pipe P-State force for FPO
- For FPO, instead of using max watermarks value for P-State disallow,
use per pipe p-state force instead
- This is in preparation to enable FPO + VActive
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DPP Root clock optimization when combined with 4to1 MPC combine results
in the screen turning black.
This is because the DPPCLK is stopped during the middle of an
optimize_bandwidth sequence during commit_minimal_transition without
going through plane power down/power up.
[How]
The intent of a 0Hz DPP clock through update_clocks is to disable the
DTO. This differs from the behavior of stopping the DPPCLK entirely
(utilizing a 0Hz clock on some ASIC) so it's better to move this logic
to reside next to plane power up/power down where we gate the HUBP/DPP
DOMAIN.
The new sequence should be:
Power down: PG enabled -> RCO on
Power up: RCO off -> PG disabled
Rename power_on_plane to power_on_plane_resources to reflect the
actual operation that's occurring.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit bcfab8e35c.
Hopefully this is fixed by the previous patch to enable
TEMP_DEPENDENT_VMIN for navi1x or otherwise and we can re-enable
MPC_SPLIT_DYNAMIC for DCN 2.0 for better power savings.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
[Why and How]
Current implementation requires FPGA builds to take a different
code path from DCN32 to write to OTG_PIXEL_RATE_DIV. Now that
we have a workaround to write to OTG_PIXEL_RATE_DIV register without
blanking display on hotplug on DCN32, we can allow the code paths for
FPGA to be exactly the same allowing for more consistent
testing.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
All dc subcomponents should call another dc component via function pointers
stored in a component structure. This is part of dc coding convention since
the beginning. The reason behind this is to improve encapsulation and
polymorphism. The function contract is extracted into a single link service
structure defined in link.h header file and implemented only in link_factory.c instead
of spreading across multiple files in link component file structure.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fields blends_with_above and blends_with_below of struct
dc_plane_cap (defined in dc/dc.h) are boolean and set to true by
default. All instances of a dc_plane_cap maintain the default values of
both. Also, there is only one if statement that checks those fields and
there would be the same effect if it was deleted (assuming that those
fields are always going to be true).
For this reason, considering both fields as legacy ones, this commit
removes them and the aforementioned if statement.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: David Tadokoro <davidbtadokoro@usp.br>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smatch reports these similar problems in dcn20
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_dsc.c:53:24:
warning: symbol 'dcn20_dsc_funcs' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_dwb.c:304:25:
warning: symbol 'dcn20_dwbc_funcs' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_mmhubbub.c:300:28:
warning: symbol 'dcn20_mmhubbub_funcs' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_mpc.c:545:24:
warning: symbol 'dcn20_mpc_funcs' was not declared. Should it be static?
All of these are only used in their definition file, so they should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
during boot up or resume from s3, hw default value of
domain_power_forceon is 1. when program domain_power_gate
to 1 to power down hw block, hw will not change to power
off due to domain_power_forceon = 1.
[how]
enable_power_gating_plane(true) should be executed to set
domain_power_forceon to 0 before dsc_pg_control.
dsc_pg_control is already called by dcn3x_init_hw-->
init_pipes--> dsc_pg_control. no need be programmed with
dcn3x_init_hw one more time.
to trigger dchub, dsc block power state change, need
program dc_ip_request_cntl to notify hw block.
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
dc_link contains over 30k line of code, the decision is to break it
down to files residing in link folder based on functionality. This
change is the last break down change which will remove dc_link.c
file after everything is broken down.
[how]
Move remaining dc_link.c functions into link_detection, link_dpms,
link_validation, link_resource, and link_fpga and remove dc_link.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Current RC params are based on VESA recommended configurations.
Some DSC sink may prefer non standard rc params values due to
hardware limitations. To support those DSC sink we will allow DM to
optionally pass rc_params_ovrd in dc_dsc_config so DC will override
the default VESA recommended configurations.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Temporarly merge dc_link_dp functions into dc_link for the
purpose of removing dc_link_dp files. This is a transitional
change for later commits where we will further refactor dc_link
file.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
1. Move dd_link_ddc functions to link_ddc.
2. Move link ddc functions declaration exposed in dc to link.h
3. Move link ddc functions declaration exposed in dm to dc_link.h
4. Remove i2caux_interface.h file
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We skip dsc_validation on pipes that are underlays, but in the
acquire_dsc code we don't have this check.
In certain conditions (when underlay pipe index is lower) we will assign
the dsc resource to the underlay pipe and skip the base pipe.
Now during dsc_validation we will skip the underlay pipe (this has the
dsc resource) but try to validate the base pipe(this doesn't have a dsc
resource) due to this mismatch we hit a NULLPTR
[How]
In the acquire_dsc add a check for underlay pipe so we
don't acquire a dsc resource for this pipe. This will match the
acquire/validation conditions.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Hersen Wu <Hersenxs.Wu@amd.com>
Acked-by: Praful Swarnakar <Praful.Swarnakar@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Pixel rate div depends on the type of encoder
that we are enabling stream with. If we swap between
HPO and DIO encoder at the time we call enable stream
for the new encoder, we must reprogram pixel rate div
based on the new encoder type.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Proper phantom pipe disable sequence was missing in
commit_planes_for_stream
- If disabling phantom pipe, turn on phantom OTG first, and turn
off the phantom OTG after the plane is disabled
- Also update sequence for enabling / disabling phantom streams
(apply_ctx_to_hw). When enabling phantom pipes, enable before
doing front end programming for phantom pipes. If disabling
phantom pipes, disable after front end programming (i.e. after
phantom plane disable)
- TODO: Still need to properly handle transition case when a phantom
pipe is transitioned directly into a real pipe (need to fully disable
the phantom pipe first)
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Output transfer function must be programmed per pipe as part of a front end
update when the plane changes, or output transfer function changes for a
given plane.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Corruption can occur in LB if vready_offset is not large enough.
DML calculates vready_offset for each pipe, but we currently select the
top pipe's vready_offset, which is not necessarily enough for all pipes
in the group.
[HOW]
Wherever program_global_sync is currently called, iterate through the
entire pipe group and find the highest vready_offset.
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Underflow is observed when cursor is still enabled when the cursor
rectangle is outside the bounds of it's surface viewport.
[How]
Update parameters used to determine when cursor should be disabled.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A hack was used to access DWB register due to difference in the register
naming convention which was not compatible with existing SR/SRI* macros.
The additional macro needed were added to dwb ip specific header file
(dcnxx_dwb.h) instead of soc resource file (dcnxx_resource.c). Due to
this pattern, BASE macro had to be redefined in dcnxx_dwb.h, which in
turn needed us to undefine them in the resource file.
[How]
Add a separate macro for DWB access to the resource files that need it
instead of defining them in DWB ip header file. This will enable us to
reuse the BASE macro defined in the resource file.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- When transitioning a pipe in use (non-phantom) to become
a phantom pipe, we must fully disable the pipe first before
doing any phantom pipe programming
- Move phantom OTG enablement to after "regular" front-end
programming sequence (including wait for vupdate)
- If a pipe is being transitioned into a phantom pipe,
fully disable it first
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
