[Why]
Triggering OTG sync before all OTG/HPO clock programming is complete
causes timing sync to fail and a subsequent P-state hang.
[How]
Move DTB clock programming earlier in the sequence to
enable_stream_timing.
Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When RCO is enabled for symclk32_le we get failures during
DP2 link traing compliance tests.
[How]
Break out symclk32_le RCO into a separate function that is
called for hpo when link is enabled/disabled.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Hardware implements root clock gating by utilizing the DPP DTO registers
with a special case of DTO enabled, phase = 0, modulo = 1. This
conflicts with our policy to always update the DPPDTO for cases where
it's expected to be disabled.
The pipes unexpectedly enter a higher power state than expected because
of this programming flow.
[How]
Guard the upper layers of HWSS against this hardware quirk with
programming the register with an internal state flag in DCCG.
While technically acting as global state for the DCCG, HWSS shouldn't be
expected to understand the hardware quirk for having DTO disabled
causing more power than DTO enabled with this specific setting.
This also prevents sequencing errors from occuring in the future if
we have to program DPP DTO in multiple locations.
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently, there is an intermittent issue where a screen can either go
blank or be corrupted.
[HOW]
To resolve the issue we trigger the ramping logic for DIO FIFO so that
it goes back up to the correct speed.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Saaem Rizvi <syedsaaem.rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smatch reports
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:277:6: warning: symbol
'dccg314_init' was not declared. Should it be static?
This variable is only used in one file so should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To enable root clock optimizations, we need a number of
register writes and need to account for the difference
in DPSTREAMCLK between DCN31 and DCN314. To prevent
issues, add a number of register writes to
DCCG_MASK_SH_LIST_DCN314_COMMON(), and define dccg314_init()
which is mostly in alignment with dccg31_init() but
accounts for the new DPSTREAMCLK sequence.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DPP Root clock optimization when combined with 4to1 MPC combine results
in the screen turning black.
This is because the DPPCLK is stopped during the middle of an
optimize_bandwidth sequence during commit_minimal_transition without
going through plane power down/power up.
[How]
The intent of a 0Hz DPP clock through update_clocks is to disable the
DTO. This differs from the behavior of stopping the DPPCLK entirely
(utilizing a 0Hz clock on some ASIC) so it's better to move this logic
to reside next to plane power up/power down where we gate the HUBP/DPP
DOMAIN.
The new sequence should be:
Power down: PG enabled -> RCO on
Power up: RCO off -> PG disabled
Rename power_on_plane to power_on_plane_resources to reflect the
actual operation that's occurring.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These functions are not used outside the file dcn32_hubbub.c, so the
modification is defined as static.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:223:6: warning: no previous prototype for ‘dccg314_set_valid_pixel_rate’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:184:6: warning: no previous prototype for ‘dccg314_set_dpstreamclk’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:140:6: warning: no previous prototype for ‘dccg314_set_dtbclk_dto’.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2144
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display Core support for DCN 3.1.4
v2:(squash)fix non-x86 in dc/dcn314/Makefile
Properly handle PPC as well. (Alex)
v3: minor cleanup (Alex)
v4: fix comment (Alex)
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
