[Why]
Currently, driver state for DCN3.2 is not strictly matching HW state for
the USBC port. To reduce inconsistencies while debugging, the driver
should match HW configuration.
[How]
Update link encoder flag to indicate USBC port. Call into DMUB to check
when DP Alt mode is entered, and also to check for 2-lane versuse 4-lane
mode.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
For FPO and SubVP/DRR cases we need to ensure to program
OTG_V_TOTAL_MIN/MAX_SEL, otherwise stretching the vblank
in FPO / SubVP / DRR cases will not have any effect
and we could hit underflow / corruption.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We want to be able to read the DPP's gamut remap matrix.
v2:
- code-style and doc comments clean-up (Melissa)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For certain dual display configs that had one display using a 1080p
mode, the DPM level used to drive the configs regressed from DPM 0 to
DPM 3. This was caused by a missing check that should have only limited
the pipe segments on non-phantom pipes. This caused issues with detile
buffer allocation, which dissallow subvp from being used
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For FPO and SubVP/DRR cases we need to ensure to program
OTG_V_TOTAL_MIN/MAX_SEL, otherwise stretching the vblank in FPO / SubVP
/ DRR cases will not have any effect and we could hit underflow /
corruption.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A new check was added to ensure FPO is not enabled when the FPO pipe has
0 planes. This requires the stream status to check the plane count, but
the stream status was not assigned for FPO + Vactive cases which leads
to FPO not be enabled always.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Relja Vojvodic <relja.vojvodic@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In DCN32/321 FPO uses per-pipe P-State force. If there is no plane, then
then HUBP is power gated, in which case any programming in HUBP has no
effect and the pipe is always asserting P-State allow. This is contrary
to what we want to happen for FPO (FW should moderate the P-State
assertion), so block FPO if there's no plane for the FPO pipe.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Reviewed-by: Samson Tam <samson.tam@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
Phantom streams and planes were previously not referenced explcitly on creation.
[HOW?]
To reduce memory management complexity, add an additional phantom streams and planes
reference into dc_state, and move mall_stream_config to stream_status inside
the state to make it safe to modify in shallow copies. Also consildates any logic
that is affected by this change to dc_state.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
Part of the dc_state interface that deals with adding streams and planes should
remain public, while others that deal with internal status' and subvp should be
private to DC.
[HOW?]
Move and rename the public functions to dc_state.h and private functions to
dc_state_priv.h. Also add some additional functions for extracting subvp meta
data from the state.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When querying DML for a vlevel after pipes have been split or merged the
ODM policy would revert to a default policy, which could cause the query
to use the incorrect ODM status. In this case ODM 2to1 was validated,
but the last DML query would assume no ODM and return the incorrect
vlevel.
[how]
Added ODM check to apply the correct ODM policy before querying DML.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Move all optc files to unique
folder optc.
[how]
creating optc repo in dc, and moved the dcnxx_optc.c and .h files into
corresponding new folders inside the optc and cleared the linkage
errors by adding relative paths in the Makefile.template.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Parandhaman K <parandhaman.k@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Previously SubVP would never be selected on 1080p60 displays because
it has too much vactive margin. However, implement a change to allow
it like how 1440p60 is allowed.
- Add a new struct such that we have a list of allowed modes for
enabling subvp with vactive margin (currently 1080p60 and 1440p60)
- Also ensure to block drr + vblank cases to prevent unexpected
enablement of new display configs
- Update SW cursor fallback for these new potential cases as well
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Move all resource files to unique folder resource.
[HOW]
Created resource folder in dc, moved the
dcnxx_resource.c and dcnxx_resource.h files into
corresponding new folders inside the resource and
made appropriate changes for compilation in Makefiles.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mounika Adhuri <moadhuri@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
MPC MCM low mem power optimization still causes color distortion on
first SCE enablement, only forces light sleep for it.
DPP low memory power optimization still needs this bit to save power.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Yihan Zhu <yihan.zhu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
LUT write index does not get reset to zero when writing the LUT values
for each separate RGB component, which results in wrong data for 2 of
the 3 components.
[How]
Reset LUT write index to zero before writing each component's data.
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Many of the register macros defined ind dcn32_resource.h have
extra brackets. This is not conforming to the style of those
defined in other DC header files.
[How]
Remove these brackets in dcn32_resource.h
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Rename hw_sequencer to hwseq.
Move all hwseq files to unique
folder hwss.
[how]
creating hwss repo in dc, and moved the dcnxx_hwseq.c
and .h files into corresponding new folders inside the hwss
and cleared the linkage errors by adding relative paths
in the Makefile.template.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Mounika Adhuri <moadhuri@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC is transitioning from DML to DML2, and this commit introduces all the
required changes for some of the already available ASICs and adds the
required code infra to support new ASICs under DML2. DML2 is also a
generated code that provides better mode verification and programming
models for software/hardware, and it enables a better way to create
validation tools. This version is more like a middle step to the
complete transition to the DML2 version.
Changes since V1:
- Alex: Fix typos
Changes since V2:
- Update DC includes
Changes since V3:
- Fix 32 bit compilation issues on x86
Changes since V4:
- Avoid compilation of DML2 on some not supported 32-bit architecture
- Update commit message
Co-developed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc->caps.color.mpc.gamut_remap says there is a post-blending color block
for gamut remap matrix for DCN3 HW family and newer versions. However,
those drivers still follow DCN10 programming that remap stream
gamut_remap_matrix to DPP (pre-blending).
To enable pre-blending and post-blending gamut_remap matrix supports at
the same time, set stream gamut_remap to MPC and plane gamut_remap to
DPP for DCN families that support both.
It was tested using IGT KMS color tests for DRM CRTC CTM property and it
preserves test results.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For multi-GPU systems it is difficult to tell which GPU a particular
message is being printed for and that is undesirable because it
complicates debugging efforts. Also, the new macros allow us to enable
logging for particular parts of the codebase more selectively (since we
no longer need to throw everything at DRM_DEBUG_KMS()). So, for the
reasons outlined above we should switch to the new macros.
We can accomplish this by using the existing DC_LOGGER code to pass
around the relevant `struct drm_device` which will be fed to the new
macros in logger_types.h. Also, we must get rid of all instances of the
DC_LOG_.*() functions that are currently in amdgpu_dm since we don't use
the DC logger there and we can simply refer to the macros directly
there instead.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Triggering OTG sync before all OTG/HPO clock programming is complete
causes timing sync to fail and a subsequent P-state hang.
[How]
Move DTB clock programming earlier in the sequence to
enable_stream_timing.
Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We have a few cases where we need to perform update topology update
in dc update interface. However some of the updates are not seamless
This could cause user noticible glitches. To enforce seamless transition
we are adding a checking condition and error logging so the corruption
as result of non seamless transition can be easily spotted.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
vrr_active_fixed should also be checked when
determining if DRR is in use
How:
Add check for vrr_active_fixed when allow_freesync
and vrr_active_variable are also checked
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In some cases such as 8k desktop surface with 144Hz timing, we decide to
enable ODM power optimization but this surface doesn't have a minimum
transition state. Therefore we cannot switch off ODM power optimization seamlessly
This creates path depedency on ODM power optimization decision. i.e
whether or not we should switch off ODM power optimization is dependent
on if the transition to switch off ODM power optimization from current state
is seamless. We don't desire a path dependent power optimization policy
as it is too dynamic and difficult to maintain.
[how]
Attempt ODM power optimization only after we can validate new state without
using pipe combine.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The result of predict_pipe_split calculation is no longer used but the
function is not removed. This will cause unnecessary calculation
of pipe split prediction in every frame update.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
For enabling automated testing, add a hook to DCHUBBUB interface so that
mall status can be queried by userspace through debugfs. This removes
dependence on requiring a userspace tool like UMR for querying status
for MALL static screen IGT test.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For use with IGT tests in userspace, the number of ODM segments in use
is required to be exposed to userspace to verify that ODM Combine is
working as expected when special timings are committed.
[How]
Add a connector specific debugfs entry that prints the number of ODM
segments in use.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Redesign pipe resource interfaces in resource.h file. The new interface
design addresses the issue with lack of pipe topology encapsulation and
lack of pipe accessors.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We need a new algorithm for acquiring secondary opp heads for ODM combine
in dcn32 and a release pipe interface to properly release pipe resources.
[how]
add two new interfaces in DCN specific resource file.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Override the det to adjust microschedule timings allow for
1080p configs with SubVP
- To lower unnecessary risk, we prevent multi 1080p configs
from using SubVP, as multi 1080p already has low idle power.
- Count the number of streams to verify that we are in a
SubVP config before overriding
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Ethan Bitnun <ethan.bitnun@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
