Since, calling dcn20_adjust_freesync_v_startup() on DCN3.1+ ASICs
can cause the display to flicker and underflow to occur, we shouldn't
call it for them. So, ensure that the DCN version is less than
DCN_VERSION_3_1 before calling dcn20_adjust_freesync_v_startup().
Cc: stable@vger.kernel.org
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It does not make sense to compare a pointer to array element with NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 65d38262b3 ("drm/amd/display: fbc state could not reach while enable fbc")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dembskiy Igor <dii@itb.spb.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ODM power optimization is only supported with single stream. When ODM
power optimization is enabled, we might not have enough free pipes for
enabling other stream. So when we are committing more than 1 stream we
should first switch off ODM power optimization to make room for new
stream and then allocating pipe resource for the new stream.
Cc: stable@vger.kernel.org
Fixes: 59de751e38 ("drm/amd/display: add ODM case when looking for first split pipe")
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We wait for mpc idle while in a locked state, leading to potential
deadlock.
[What]
Move the wait_for_idle call to outside of HW lock. This and a
call to wait_drr_doublebuffer_pending_clear are moved added to a new
static helper function called wait_for_outstanding_hw_updates, to make
the interface clearer.
Cc: stable@vger.kernel.org
Fixes: 8f0d304d21 ("drm/amd/display: Do not commit pipe when updating DRR")
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we are dynamically adding new ODM slices, we didn't update
blank state, if the pipe used by new ODM slice is previously blanked,
we will continue outputting blank pixel data on that slice causing
right half of the screen showing blank image.
The previous fix was a temporary hack to directly update current state
when committing new state. This could potentially cause hw and sw
state synchronization issues and it is not permitted by dc commit
design.
Cc: stable@vger.kernel.org
Fixes: 7fbf451e76 ("drm/amd/display: Reinit DPG when exiting dynamic ODM")
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A benchmark stress test (12-40 machines x 48hours) found that DCN315 has
cases where DC writes to an indirect register to set the smu clock msg
id, but when we go to read the same indirect register the returned msg
id doesn't match with what we just set it to. So, to fix this retry the
write until the register's value matches with the requested value.
Cc: stable@vger.kernel.org # 6.1+
Fixes: f949039961 ("drm/amd/display: Add DCN315 CLK_MGR")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Fudong Wang <fudong.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This partially reverts commit 460ea89805 ("drm/amd/display: update add
plane to context logic with a new algorithm").
The new secondary pipe allocation logic triggers an issue with a
specific hardware state transition and causes a frame of corruption when
toggling between windowed MPO and ODM desktop only mode. Ideally hwss is
supposed to handle this scenario. We are temporarily reverting the logic
and investigate the root cause why this transition would cause
corruptions.
Fixes: 460ea89805 ("drm/amd/display: update add plane to context logic with a new algorithm")
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
OTG_STATIC_SCREEN_EVENT_MASK is changed in DCN3,
but we still follow DCN2 to apply setting for
OTG_STATIC_SCREEN_EVENT_MASK.
[How]
Add new function to apply correct settings for DCN3 series.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: SungHuai Wang <danny.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If VBlank_nom is too small, it will cause
VStartUP_Start smaller than VBackPorch + VSync width which is an
invalid case for VStartUP_Start and where to send AS-SDP.
[How]
Setup a minimum value to VBlank_nom
Reviewed-by: Reza Amini <reza.amini@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
vstartup is calculated to be a large number. it works because
it is within vertical blank, but it reduces region of blank that
can be used for power gating.
[how]
Calculation needs to convert micro seconds to number of
vertical lines.
Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Reza Amini <reza.amini@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
This Unit correction exposes a Replay corruption.
[how]
This reverts commit:
commit dbd29029c7 ("drm/amd/display: Correct unit conversion for vstartup")
Roll back unit conversion until Replay can fix their corruption.
Fixes: dbd29029c7 ("drm/amd/display: Correct unit conversion for vstartup")
Reviewed-by: Reza Amini <reza.amini@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
- Add IRQ handling for DCN35
- Update IRQ files for other DCNs in accordance
to change in irq_service.h
Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ODM power optimization is only supported with single stream. When ODM
power optimization is enabled, we might not have enough free pipes for
enabling other stream. So when we are committing more than 1 stream we
should first switch off ODM power optimization to make room for new
stream and then allocating pipe resource for the new stream.
Cc: stable@vger.kernel.org
Fixes: 59de751e38 ("drm/amd/display: add ODM case when looking for first split pipe")
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- DCN315 fixes
- DCN31 fixes
- DPIA fixes
- Dump the pipe topology when it updates
- Misc code cleanups
- New debugfs interface to query the current ODM combine configuration
- ODM fixes
- Potential deadlock while waiting for MPC idle fix
- Support for windowed MPO ODM
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There is a logging error in the recently added pipe topology log.
If the plane with index 0 uses MPC combine, the log shows that
as two separate planes.
[how]
Initialize plane idx as -1 and increment plane idx before logging
any primary dpp pipes of a plane.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For use with IGT tests in userspace, the number of ODM segments in use
is required to be exposed to userspace to verify that ODM Combine is
working as expected when special timings are committed.
[How]
Add a connector specific debugfs entry that prints the number of ODM
segments in use.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
