[Why]
Currently we set FCLK p-state change
watermark calculated based on dummy
p-state latency when UCLK p-state is
not supported
[How]
Calculate FCLK p-state change watermark
based on on FCLK pstate change latency
in case UCLK p-state is not supported
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Underflow observed during P010 video playback on
dcn314 due to incorrectly populated bw_params
[How]
Populate fclk, memclk and voltage in bw_params with
values from max pstate rather than min pstate
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It's not supported in multi-display, but it is supported in 2nd eDP
screen only.
[How]
Remove multi display support, restrict number of planes for all
z-states support, but still allow Z8 if we're not using PWRSEQ0.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Current RC params are based on VESA recommended configurations.
Some DSC sink may prefer non standard rc params values due to
hardware limitations. To support those DSC sink we will allow DM to
optionally pass rc_params_ovrd in dc_dsc_config so DC will override
the default VESA recommended configurations.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Enable Freesync over PCon on Linux environment.
[how]
Adding Freesync over PCon support in amdgpu_dm
- Read DPCD for Freesync over PCon capabilitiy
- Add whitelist for compatible branch devices
Reviewed-by: Chao-kai Wang <Stylon.Wang@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, it
warns:
clang-16: error: argument unused during compilation: '-mhard-float' [-Werror,-Wunused-command-line-argument]
Similar to commit 84edc2eff8 ("selftest/fpu: avoid clang warning"),
just add this flag to GCC builds. Commit 0f0727d971 ("drm/amd/display:
readd -msse2 to prevent Clang from emitting libcalls to undefined SW FP
routines") added '-msse2' to prevent clang from emitting software
floating point routines.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This version brings along following fixes:
- Fix timing not changning when freesync video is enabled
- avoid disable otg when dig was disabled
- Properly reuse completion structure
- Pass DSC slice height to PSR FW
- merge dc_link_dp into dc_link
- move dp cts functions from dc_link_dp to link_dp_cts
- move dp irq handler functions from dc_link_dp to link_dp_irq_handler
- Enable AdaptiveSync in DC interface
- adjust MALL size available for DCN32 and DCN321
- Set init freq for DCFCLK DS
- Use |= when assigning wm_optimized_required
- move eDP panel control logic to link_edp_panel_control
- create accessories, hwss and protocols sub folders in link
- Disable SubVP for PSR panels
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This is a workaround for an dcn3.1 hang that happens if otg dispclk
is ramped while otg is on and stream enc is off.
But this w/a should not trigger when we have a dig active.
[How]
Avoid disable otg when dig was disabled.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Jingwen Zhu <Jingwen.Zhu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When DSC is enabled, the PSRSU seletive update region
must be multiple number of DSC slice height number.
The original solution is to overwrite the SU Y granularity
by DSC slice height in DAL driver. However, the size
of the SU Y granularity variable only has 8 bytes
and the DSC slice height may over the 8 bytes size.
[How]
Instead of overwriting the SU Y granularity value,
add a new DSC slice height pararmeter and pass it
to DMUB PSRSU FW. The PSRSU FW will refer to the
DSC slice height value and extend the SU region.
Reviewed-by: Dennis Chan <dennis.chan@amd.com>
Reviewed-by: ChunTao Tso <chuntao.tso@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Temporarly merge dc_link_dp functions into dc_link for the
purpose of removing dc_link_dp files. This is a transitional
change for later commits where we will further refactor dc_link
file.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MALL size available can vary for different SKUs.
Use num_chans read from VBIOS to determine the available MALL size we can use
[How]
Define max_chans for DCN32 and DCN321.
If num_chans is max_chans, then return max_chans as we can access the
entire MALL space.
Otherwise, define avail_chans as the number of available channels we are
allowed instead.
Return corresponding number of channels back and use this to calculate
available MALL size.
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Set init frequency for DCFCLK DS
- For now choose 10Mhz after turning off all pipes on init
- DCN32 spreadsheet shows 8Mhz is min for any display config
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
link component contains three sub folders:
accessories - utilities for improving testability, logging or tracing, doesn't impact
end user use cases.
protocols - specs defined protocols used in end user use cases
hwss - hwss owned link_hwss object, served as an abstraction layer in hwss to
access various types of encoder/phy/dpia endpoints in a unified interface.
sooner we will have files directly under link folder one for the implementation of
each major link behavior such as link_create, link_detect, link_validate
and link_set_dpms.
Reviewed-by: George Shen <George.Shen@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- We cannot enable subvp on PSR panels because when
PSR is active, HUBP is turned off and we cannot rely
on the HUBP vline interrupt
- When in PSR, surface data also cannot be prefetched to MALL
because the main HUBP will be off
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- [FW Promotion] Release 0.0.150.0
- Correcting prefetch mode for fast validate
- Set hvm_enabled flag for S/G mode
- set allow_freesync parameter in DM
- Revert "ignore msa parameter only if freesync is enabled"
- Allow idle optimization after turning off all pipes
- Guard Freesync HDMI parsing with dc_lock
- Speed up DML fast_validate path
- Disable MALL SS and messages for PSR supported configs
- force connector state when bpc changes during compliance
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY and HOW]
When fast validating, we should be agnostic to any sort of optimizations
such as supporting Pstate or stutter in Vblank. We should change our
prefetch mode for fast validate to support none of these optimizations.
For example, Valve Index running at 144Hz can only be validated without
any support these optimizations.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In certain D3 cases (BOCO / BOMACO) the hardware is reset but
software state still has idle_optimizations = true. This prevents
us from entering idle optimizations again if no display is connected.
[How]
In hw init, reset the idle optimization state, and allow idle
optimizations after all pipes have been turned off.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Iterating over every voltage state when we need to validate thousands of
configurations all at once (i.e. display hotplug) can take a significant
amount of time.
[How]
Check just the highest voltage state when fast_validate is true to
verify whether the configuration can work at all, then do a proper
validation including all voltage states later when fast_validate is false.
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During DP DSC compliance tests, bpc requested would
change between sub-tests, which requires stream
to be recommited.
[How]
Force connector to disconnect and reconnect whenever
there is a bpc change in automated test.
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not all ASICs support LTTPR, however if they don't it doesn't mean that
we have encountered unexpected behaviour. So, use DC_NOT_SUPPORTED
instead of DC_ERROR_UNEXPECTED.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some of the data structures are hidden when CONFIG_DRM_AMD_DC_DCN is
disabled, which leads to a link failure:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c:234:21: error: 'union hdmi_encoded_link_bw' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
234 | const union hdmi_encoded_link_bw hdmi_encoded_link_bw)
| ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c:234:42: error: parameter 2 ('hdmi_encoded_link_bw') has incomplete type
234 | const union hdmi_encoded_link_bw hdmi_encoded_link_bw)
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c:232:17: error: function declaration isn't a prototype [-Werror=strict-prototypes]
232 | static uint32_t intersect_frl_link_bw_support(
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c: In function 'get_active_converter_info':
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c:1126:76: error: storage size of 'hdmi_encoded_link_bw' isn't known
1126 | union hdmi_encoded_link_bw hdmi_encoded_link_bw;
| ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c:1130:101: error: 'struct <anonymous>' has no member named 'MAX_ENCODED_LINK_BW_SUPPORT'
1130 | hdmi_color_caps.bits.MAX_ENCODED_LINK_BW_SUPPORT);
There is probably no need to hide the data structure, and removing
the #ifdef makes it build cleanly.
Fixes: d5a43956b7 ("drm/amd/display: move dp capability related logic to link_dp_capability")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gcc-13 notices a mismatch between the return type of dp_retrieve_lttpr_cap()
and the returned value:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c: In function 'dp_retrieve_lttpr_cap':
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c:1465:24: error: implicit conversion from 'enum <anonymous>' to 'enum dc_status' [-Werror=enum-conversion]
1465 | return false;
| ^~~~~
Change the value to an actual dc_status code and remove the bogus
initialization that was apparently meant to get returned here.
Fixes: b473bd5fc3 ("drm/amd/display: refine wake up aux in retrieve link caps")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently plugging in a USB-C device that issues an HPD will emit
a warning level message `DP Alt mode state on HPD: %d`.
This is needlessly noisy for most people, decrease it to debug so
that it can be turned on by dynamic debug as needed.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The YCC conversion matrix for RGB -> COLOR_SPACE_YCBCR2020_TYPE is
missing the values for the fourth column of the matrix.
The fourth column of the matrix is essentially just a value that is
added given that the color is 3 components in size.
These values are needed to bias the chroma from the [-1, 1] -> [0, 1]
range.
This fixes color being very green when using Gamescope HDR on HDMI
output which prefers YCC 4:4:4.
Fixes: 40df2f809e ("drm/amd/display: color space ycbcr709 support")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The YCC conversion matrix for RGB -> COLOR_SPACE_YCBCR2020_TYPE is
missing the values for the fourth column of the matrix.
The fourth column of the matrix is essentially just a value that is
added given that the color is 3 components in size.
These values are needed to bias the chroma from the [-1, 1] -> [0, 1]
range.
This fixes color being very green when using Gamescope HDR on HDMI
output which prefers YCC 4:4:4.
Fixes: 40df2f809e ("drm/amd/display: color space ycbcr709 support")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use swap() helper macro instead of open coded swap instructions. The
change also facilitates code cleanup and realignment for improved
readability. Issue identified using swap.cocci Coccinelle semantic
patch script.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Revert patches that caused regressions associated with audio and an
old change that checks the DCN version.
- Refactor DDC and HDP.
- Move DPIA and DPCD logic to new files.
- Updates to DMUB.
- Optimization and bug fixes for SUBVP/DRR.
- Drop legacy code.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
Cannot only consider the MALL required from top pipes because of the MPO
case.
[HOW?]
Only count a pipe if it fits the following criteria:
1) does not have a top pipe (is the topmost pipe for that plane)
2) it does have a top pipe, but that pipe is associated with a different
plane
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Request min clocks after disabling pipes on init
- This optimizes for power savings during init sequence
- Also handles the case where we boot up with no display connected
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When an eDP panel is powered externally from a different GPU, we can avoid
waiting for hardware sequencing delays when switching the backlight on/off
as the display backlight is no longer powered by the original source.
[How]
This commit extends the 'link_powered_externally' variable to allow
bypassing hardware delays for additional backlight commands and force the
backlight on/off when a link is powered by another GPU.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Felipe Clark <felipe.clark@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Tony Tascioglu <tony.tascioglu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCC meta was found to be detached from usable pixel data. Due to this
DCC meta and the end of the fetched part of the frame will be on not
be on the same mblk. Furthermore if the meta is not aligned to the mblk
size, then we require an extra mblk in MALL to account for this.
[How]
Always add an additional mblk when DCC is enabled for detachment and
misalignment.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When an eDP panel is powered externally by a different GPU, we don't need
to wait for hardware sequencing delays when powering down a link, as the
display is not dependent on the GPU being powered down.
[How]
This commit adds a variable 'link_powered_externally' to indicate when a
link is being powered by another GPU.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Felipe Clark <felipe.clark@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Tony Tascioglu <tony.tascioglu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Checking for disabled master pipe on a timing synchronized pipe is
incorrect in the case of ODM combine. This case is acceptable as long as
the disabled master pipe is part of the ODM tree. Skip printing error
message if this condition holds true.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
