[Description]
When choosing which dummy p-state latency to use, we
need to use the DRAM speed from validation. The DRAMSpeed
DML variable can change because we use different input
params to DML when populating watermarks set B.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We can override SR watermarks but not Z8 ones.
[How]
Add new parameters for Z8 matching the SR ones and feed them into the
states.
These also weren't being applied to every state, so make sure that
we loop over and update all SOC states if given an override.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The smu needs to get the rlc power down message to sync the rlc state
with smu, the rlc state updating message need to be sent at while smu
begin suspend sequence , otherwise SMU will crash while RLC state is not
notified by driver, and rlc state probally changed after that
notification, so it needs to notify rlc state to smu at the end of the
suspend sequence in amdgpu_device_suspend() that can make sure the rlc
state is correctly set to SMU.
[ 101.000590] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
[ 101.000598] amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff!
[ 110.838026] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
[ 110.838035] amdgpu 0000:03:00.0: amdgpu: Failed to disable smu features.
[ 110.838039] amdgpu 0000:03:00.0: amdgpu: Fail to disable dpm features!
[ 110.838040] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62
[ 110.884394] PM: suspend of devices aborted after 21213.620 msecs
[ 110.884402] PM: start suspend of devices aborted after 21213.882 msecs
[ 110.884405] PM: Some devices failed to suspend, or early wake event detected
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In dcn32 DML pipes are ordered the same as dc pipes but only for used
pipes. For example, if dc pipe 1 and 2 are used, their dml pipe indices
would be 0 and 1 respectively. However
update_pipe_slice_table_with_split_flags doesn't skip indices for free
pipes. This causes us to not reference correct dml pipe output when
building pipe topology.
[how]
Use two variables to iterate dc and dml pipes respectively and only
increment dml pipe index when current dc pipe is not free.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DML2 means that the dcn3x policy for calculating z-state support
no longer runs from validate_bandwidth.
This means we are unconditionally allowing Z8, the hardware default.
[How]
Port the policy over to DCN35, but with a few modifications:
- Don't use min_dst_y_next_start as a check for Z8/Z10 allow
- Add support for overriding the Z10 stutter period per ASIC
- Cleanup the code to make the policy assignment more clear
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The legacy region at 0x7F000 maps to valid registers in GC 9.4.3 SOCs.
Use 0x1A000 offset instead as MMIO register remap region.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add reg_state attribute to fetch the register snapshot of different
IPs like XGMI, WAFL,PCIE and USR. To get a snapshot for a particular IP
1) Open the sysfs file
2) Seek to the offset as defined in amdgpu_sysfs_reg_offset
3) Read
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This header defines the reg state structures exposed via
sysfs for umr debugging.
v2: add content type
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
[Why]
Memory leaks of gang_ctx_bo and wptr_bo.
[How]
Free gang_ctx_bo and wptr_bo in pqm_uninit.
v2: add a common function pqm_clean_queue_resource to
free queue's resources.
v3: reset pdd->pqd.num_gws when destorying GWS queue.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DTBCLK is enabled on idle and it will burn power.
[How]
There's a few issues here:
- Always enabling DTBCLK on clock manager init
- Setting refclk when DTBCLK is supposed to be disabled
- Not applying the correct calculated version refclk, but instead the
base value which might be zero
On dtbclk_en change we'll message PMFW to enable or disable the clock
accordingly.
The DTBDTO will be then based on refclk, but it will be set to the
default fixed value if there was nothing calculated in DML despite the
clock being considered enabled.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make restore workers freezable so we don't have to explicitly flush them
in suspend and GPU reset code paths, and we don't accidentally try to
restore BOs while the GPU is suspended. Not having to flush restore_work
also helps avoid lock/fence dependencies in the GPU reset case where we're
not allowed to wait for fences.
A side effect of this is, that we can now have multiple concurrent threads
trying to signal the same eviction fence. Rework eviction fence signaling
and replacement to account for that.
The GPU reset path can no longer rely on restore_process_worker to resume
queues because evict/restore workers can run independently of it. Instead
call a new restore_process_helper directly.
This is an RFC and request for testing.
v2:
- Reworked eviction fence signaling
- Introduced restore_process_helper
v3:
- Handle unsignaled eviction fences in restore_process_bos
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When dGPU is put into BOCO it may be in D3cold but still able send
PME on display hotplug event. For this to work it must be enabled
as wake source from D3.
When runpm is enabled use pci_wake_from_d3() to mark wakeup as
enabled by default.
Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For 'AMDGPU_FAMILY_SI' family cards, in 'si_common_early_init' func, init
'didt_rreg' and 'didt_wreg' to 'NULL'. But in func
'amdgpu_debugfs_regs_didt_read/write', using 'RREG32_DIDT' 'WREG32_DIDT'
lacks of relevant judgment. And other 'amdgpu_ip_block_version' that use
these two definitions won't be added for 'AMDGPU_FAMILY_SI'.
So, add null pointer judgment before calling.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When kzalloc() for smu_table->ecc_table fails, we should free
the previously allocated resources to prevent memleak.
Fixes: edd7942085 ("drm/amd/pm: add message smu to get ecc_table v2")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This worked by luck if the GART aperture ended up at 0. When
we ended up moving GART on some chips, the GART aperture ended
up offsetting the AGP address since the resource->start is
a GART offset, not an MC address. Fix this by moving the AGP
address setup into amdgpu_bo_gpu_offset_no_check().
v2: check mem_type before checking agp
v3: check if the ttm bo has a ttm_tt allocated yet
Fixes: 67318cb843 ("drm/amdgpu/gmc11: set gart placement GC11")
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reported-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reported-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: christian.koenig@amd.com
Cc: mario.limonciello@amd.com
checkpatch complains that:
WARNING: braces {} are not necessary for single statement blocks
+ if (pool->base.irqs != NULL) {
+ dal_irq_service_destroy(&pool->base.irqs);
+ }
Fixed it by removing unnecessary braces to fix the coding style issue.
Signed-off-by: RutingZhang <u202112078@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On recent versions of DMUB firmware, if we want to completely disable
ABM we have to pass ABM_LEVEL_IMMEDIATE_DISABLE as the requested ABM
level to DMUB. Otherwise, LCD eDP displays are unable to reach their
maximum brightness levels. So, to fix this whenever the user requests an
ABM level of 0 pass ABM_LEVEL_IMMEDIATE_DISABLE to DMUB instead. Also,
to keep the user's experience consistent map ABM_LEVEL_IMMEDIATE_DISABLE
to 0 when a user tries to read the requested ABM level.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Refactor code such that ras block decides the default mca debug mode,
and not swsmu block.
By default mca debug mode is set to false.
v2: squash in uninitialized value fix (Alex)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add a tracing framework, to measure duration, execution count and
longest duration of main loop/vsync interrupt work
GPINT command is used to start/stop the measurements.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are a number of instances where we convert HostVMMinPageSize or
GPUVMMinPageSize from bytes to KB by dividing (rather than multiplying) and
vice versa.
Additionally, in some cases, a parameter is passed through DML in KB but
later checked as if it were in bytes.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KFD_GC_VERSION was recently updated to use a new function
for IP version checks. As a result, use KFD_GC_VERSION as
the common function for all IP version checks in KFD.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The new table doesn't have an implicit mapping between Fclk SOC voltage
and MemClk and it currently builds the table off of number of Fclk
states rather than DcfClock states.
The DML table in use is not correct for functionality or power and
does not align with our existing policies for DCN3x.
[How]
Build the table based on DcfClock with the following assumptions:
1. Raising Soc voltage is the most expensive operation, so assume that
running at max DispClock or DppClock is preferable.
2. Assume that we can run at max Fclk / MemClk at any state, but
restrict the maximum state to the very last entry in the table as the
worst case scenario.
3. Assume that Fclk always has a 2x multiplier on DcfClock unless the
table specifies something lower.
Reviewed-by: Taimur Hassan <syed.hassan@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Move all optc files to unique
folder optc.
[how]
creating optc repo in dc, and moved the dcnxx_optc.c and .h files into
corresponding new folders inside the optc and cleared the linkage
errors by adding relative paths in the Makefile.template.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Parandhaman K <parandhaman.k@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Handover from DMUB to driver does not perform link rate toggle.
It might cause link training failure for boot up.
[HOW]
Force toggle rate wa for first link train.
link->vendor_specific_lttpr_link_rate_wa should be zero then.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zhongwei <zhongwei.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- To reduce vlevel further, we can try to apply subvp on
configs that already support p-state since the natural
p-state support may not allow for DPM0.
- Add code to try subvp to reduce UCLK DPM level further
if already supported, but don't use subvp if it does not
optimize the DPM level even lower
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Flickering occurs on DRR supported panels when engaged in DRR due to
min_dst_y_next becoming larger than the frame size itself.
[How]
In general, we should be able to enter Z8 when this is engaged but it
might be a net power loss even if the calculation wasn't bugged.
Don't support enabling Z8 during the DRR region.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Syed Hassan <syed.hassan@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
