The serial number tracking of engines happens at the backend of
request submission and was expecting to only be given physical
engines. However, in GuC submission mode, the decomposition of virtual
to physical engines does not happen in i915. Instead, requests are
submitted to their virtual engine mask all the way through to the
hardware (i.e. to GuC). This would mean that the heart beat code
thinks the physical engines are idle due to the serial number not
incrementing. Which in turns means hangcheck does not work for
GuC virtual engines.
This patch updates the tracking to decompose virtual engines into
their physical constituents and tracks the request against each. This
is not entirely accurate as the GuC will only be issuing the request
to one physical engine. However, it is the best that i915 can do given
that it has no knowledge of the GuC's scheduling decisions.
Downside of this is that all physical engines constituting a GuC
virtual engine will be periodically unparked (even during just a single
context executing) in order to be pinged with a heartbeat request.
However the power and performance cost of this is not expected to be
measurable (due low frequency of heartbeat pulses) and it is considered
an easier option than trying to make changes to GuC firmware.
v2:
(Tvrtko)
- Update commit message
- Have default behavior if no vfunc present
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-3-matthew.brost@intel.com
HDMI and DisplayPort sequences states that audio and PSR should be
disabled before planes are disabled.
Not following it did not caused any problems up to Alderlake-P but
for this platform it causes underruns during the PSR2 disable
sequence.
Specification don't mention that DRRS should be disabled before planes
but it looks safer to switch back to the default refresh rate before
following with the rest of the pipe disable sequence.
BSpec: 49191
BSpec: 49190
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210726181559.80855-1-jose.souza@intel.com
PSF GV points are an additional factor that can limit the
bandwidth available to display, separate from the traditional
QGV points. Whereas traditional QGV points represent possible
memory clock frequencies, PSF GV points reflect possible
frequencies of the memory fabric.
Switching between PSF GV points has the advantage of incurring
almost no memory access block time and thus does not need to be
accounted for in watermark calculations.
This patch adds support for those on top of regular QGV points.
Those are supposed to be used simultaneously, i.e we are always
at some QGV and some PSF GV point, based on the current video
mode requirements.
Bspec: 64631, 53998
v2: Seems that initial assumption made during ml conversation
was wrong, PCode rejects any masks containing points beyond
the ones returned, so even though BSpec says we have around
8 points theoretically, we can mask/unmask only those which
are returned, trying to manipulate those beyond causes a
failure from PCode. So switched back to generating mask
from 1 - num_qgv_points, where num_qgv_points is the actual
amount of points, advertised by PCode.
v3: - Extended restricted qgv point mask to 0xf, as we have now
3:2 bits for PSF GV points(Matt Roper)
- Replaced val2 with NULL from PCode request, since its not being
used(Matt Roper)
- Replaced %d to 0x%x for better readability(thanks for spotting)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210531064845.4389-2-stanislav.lisovskiy@intel.com
EHL and JSL add the 'Bypass LLC' MOCS entry, which should make it
possible for userspace to bypass the GTT caching bits set by the kernel,
as per the given object cache_level. This is troublesome since the heavy
flush we apply when first acquiring the pages is skipped if the kernel
thinks the object is coherent with the GPU. As a result it might be
possible to bypass the cache and read the contents of the page directly,
which could be stale data. If it's just a case of userspace shooting
themselves in the foot then so be it, but since i915 takes the stance of
always zeroing memory before handing it to userspace, we need to prevent
this.
v2: this time actually set cache_dirty in put_pages()
v3: move to get_pages() which looks simpler
BSpec: 34007
References: 046091758b ("Revert "drm/i915/ehl: Update MOCS table for EHL"")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Cc: Francisco Jerez <francisco.jerez.plata@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723105045.400841-2-matthew.auld@intel.com
The fast path only updates cursor register what will not cause
any updates in the screen when using PSR2 selective fetch.
The only option that we have is to go through the slow patch that will
do full atomic commit, that will trigger the PSR2 selective fetch
compute and programing calls.
Without this patch is possible to see a mouse movement lag in Gnome
when PSR2 selective fetch is enabled.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717011227.204494-3-jose.souza@intel.com
Until we support p2p dma or as a complement to that, migrate data
to system memory at dma-buf attach time if possible.
v2:
- Rebase on dynamic exporter. Update the igt_dmabuf_import_same_driver
selftest to migrate if we are LMEM capable.
v3:
- Migrate also in the pin() callback.
v4:
- Migrate in attach
v5: (jason)
- Lock around the migration
v6: (jason)
- Move the can_migrate check outside the lock
- Rework the selftests to test more migration conditions. In
particular, SMEM, LMEM, and LMEM+SMEM are all checked.
v7: (mauld)
- Misc style nits
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-9-jason@jlekstrand.net
If our exported dma-bufs are imported by another instance of our driver,
that instance will typically have the imported dma-bufs locked during
dma_buf_map_attachment(). But the exporter also locks the same reservation
object in the map_dma_buf() callback, which leads to recursive locking.
So taking the lock inside _pin_pages_unlocked() is incorrect.
Additionally, the current pinning code path is contrary to the defined
way that pinning should occur.
Remove the explicit pin/unpin from the map/umap functions and move them
to the attach/detach allowing correct locking to occur, and to match
the static dma-buf drm_prime pattern.
Add a live selftest to exercise both dynamic and non-dynamic
exports.
v2:
- Extend the selftest with a fake dynamic importer.
- Provide real pin and unpin callbacks to not abuse the interface.
v3: (ruhl)
- Remove the dynamic export support and move the pinning into the
attach/detach path.
v4: (ruhl)
- Put pages does not need to assert on the dma-resv
v5: (jason)
- Lock around dma_buf_unmap_attachment() when emulating a dynamic
importer in the subtests.
- Use pin_pages_unlocked
v6: (jason)
- Use dma_buf_attach instead of dma_buf_attach_dynamic in the selftests
v7: (mauld)
- Use __i915_gem_object_get_pages (2 __underscores) instead of the
4 ____underscore version in the selftests
v8: (mauld)
- Drop the kernel doc from the static i915_gem_dmabuf_attach function
- Add missing "err = PTR_ERR()" to a bunch of selftest error cases
Reported-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-8-jason@jlekstrand.net
Without TTM, we have no such hook so we exit early but this is fine
because we use TTM on all LMEM platforms and, on integrated platforms,
there is no real migration. If we do have the hook, it's better to just
let TTM handle the migration because it knows where things are actually
placed.
This fixes a bug where i915_gem_object_migrate fails to migrate newly
created LMEM objects. In that scenario, the object has obj->mm.region
set to LMEM but TTM has it in SMEM because that's where all new objects
are placed there prior to getting actual pages. When we invoke
i915_gem_object_migrate, it exits early because, from the point of view
of the GEM object, it's already in LMEM and no migration is needed.
Then, when we try to pin the pages, __i915_ttm_get_pages is called
which, unaware of our failed attempt at a migration, places the object
in SMEM. This only happens on newly created objects because they have
this weird state where TTM thinks they're in SMEM, GEM thinks they're in
LMEM, and the reality is that they don't exist at all.
It's better if GEM just always calls into TTM and let's TTM handle
things. That way the lies stay better contained. Once the migration is
complete, the object will have pages, obj->mm.region will be correct,
and we're done lying.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-7-jason@jlekstrand.net
__i915_ttm_get_pages does two things. First, it calls ttm_bo_validate()
to check the given placement and migrate the BO if needed. Then, it
updates the GEM object to match, in case the object was migrated. If
no migration occured, however, we might still have pages on the GEM
object in which case we don't need to fetch them from TTM and call
__i915_gem_object_set_pages. This hasn't been a problem before because
the primary user of __i915_ttm_get_pages is __i915_gem_object_get_pages
which only calls it if the GEM object doesn't have pages.
However, i915_ttm_migrate also uses __i915_ttm_get_pages to do the
migration so this meant it was unsafe to call on an already populated
object. This patch checks i915_gem_object_has_pages() before trying to
__i915_gem_object_set_pages so i915_ttm_migrate is safe to call, even on
populated objects.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-6-jason@jlekstrand.net
Instead of hand-rolling the same three calls in each function, pull them
into an i915_gem_object_create_user helper. Apart from re-ordering of
the placements array ENOMEM check, there should be no functional change.
v2 (Matthew Auld):
- Add the call to i915_gem_flush_free_objects() from
i915_gem_dumb_create() in a separate patch
- Move i915_gem_object_alloc() below the simple error checks
v3 (Matthew Auld):
- Add __ to i915_gem_object_create_user and kerneldoc which warns the
caller that it's not validating anything.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-5-jason@jlekstrand.net
Since we don't allow changing the set of regions after creation, we can
make ext_set_placements() build up the region set directly in the
create_ext and assign it to the object later. This is similar to what
we did for contexts with the proto-context only simpler because there's
no funny object shuffling. This will be used in the next patch to allow
us to de-duplicate a bunch of code. Also, since we know the maximum
number of regions up-front, we can use a fixed-size temporary array for
the regions. This simplifies memory management a bit for this new
delayed approach.
v2 (Matthew Auld):
- Get rid of MAX_N_PLACEMENTS
- Drop kfree(placements) from set_placements()
v3 (Matthew Auld):
- Properly set ext_data->n_placements
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-3-jason@jlekstrand.net
We don't roll them together entirely because there are still a couple
cases where we want a separate can_migrate check. For instance, the
display code checks that you can migrate a buffer to LMEM before it
accepts it in fb_create. The dma-buf import code also uses it to do an
early check and return a different error code if someone tries to attach
a LMEM-only dma-buf to another driver.
However, no one actually wants to call object_migrate when can_migrate
has failed. The stated intention is for self-tests but none of those
actually take advantage of this unsafe migration.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-2-jason@jlekstrand.net
This is only used by GRAPHICS_VER == 6 and GRAPHICS_VER == 7. All other
recent platforms do not depend on this field, so it doesn't make much
sense to keep it generic like that. Instead, just do a mapping from
engine class to HW ID in the single place that is needed.
v2: use macros with the direct register address instead of calculating
from the legacy HW_ID (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723002551.3906535-1-lucas.demarchi@intel.com
Commit 5a9d38b20a ("drm/i915/display: hide workaround for broken vbt
in intel_bios.c") moved the workaround for broken or missing VBT to
intel_bios.c. However is_port_valid() only protects the handling of
different skus of the same display version. Since in
intel_setup_outputs() we share the code path with version 9, this would
also create port F for SKL/KBL, which does not exist.
Missing VBT can be reproduced when starting a headless QEMU with no
opregion available.
Avoid the issue by splitting versions 9 and 10 in intel_setup_outputs(),
which also makes it more clear what code path it's taking for each
version.
v2: move generic display version after Geminilake since that one has
a different set of outputs
Fixes: 5a9d38b20a ("drm/i915/display: hide workaround for broken vbt in intel_bios.c")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by: Christoph Hellwig <hch@lst.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210722232922.3796835-1-lucas.demarchi@intel.com
(cherry picked from commit ec387b8ff8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We were using GRAPHICS_VER() to handle SKL_DFSM register, which means we
were not handling GLK correctly since that has GRAPHICS_VER == 9, but
DISPLAY_VER == 10. Switch the entire branch to check DISPLAY_VER
which makes it more in line with Bspec.
Even though the Bspec has an exception for RKL in
TGL_DFSM_PIPE_D_DISABLE, we don't have to do anything as the bit has
disable semantic and RKL doesn't have pipe D.
Bspec: 50075, 7548
Fixes: 2b5a4562ed ("drm/i915/display: Simplify GLK display version tests")
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723234352.214459-1-lucas.demarchi@intel.com
(cherry picked from commit 4fd177288a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Commit 5a9d38b20a ("drm/i915/display: hide workaround for broken vbt
in intel_bios.c") moved the workaround for broken or missing VBT to
intel_bios.c. However is_port_valid() only protects the handling of
different skus of the same display version. Since in
intel_setup_outputs() we share the code path with version 9, this would
also create port F for SKL/KBL, which does not exist.
Missing VBT can be reproduced when starting a headless QEMU with no
opregion available.
Avoid the issue by splitting versions 9 and 10 in intel_setup_outputs(),
which also makes it more clear what code path it's taking for each
version.
v2: move generic display version after Geminilake since that one has
a different set of outputs
Fixes: 5a9d38b20a ("drm/i915/display: hide workaround for broken vbt in intel_bios.c")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by: Christoph Hellwig <hch@lst.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210722232922.3796835-1-lucas.demarchi@intel.com
We were using GRAPHICS_VER() to handle SKL_DFSM register, which means we
were not handling GLK correctly since that has GRAPHICS_VER == 9, but
DISPLAY_VER == 10. Switch the entire branch to check DISPLAY_VER
which makes it more in line with Bspec.
Even though the Bspec has an exception for RKL in
TGL_DFSM_PIPE_D_DISABLE, we don't have to do anything as the bit has
disable semantic and RKL doesn't have pipe D.
Bspec: 50075, 7548
Fixes: 2b5a4562ed ("drm/i915/display: Simplify GLK display version tests")
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723234352.214459-1-lucas.demarchi@intel.com
A new step has been added to the DP modeset sequences for all platforms
with display version 12 and beyond: if enabling DP MST with FEC, we
need to set a chicken bit before enabling the transcoder. The chicken
bit should be disabled again before disabling the transcoder (which we
can do unconditionally since it shouldn't be set anyway in non-MST
cases).
Bspec: 49190, 54128, 55424
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723170618.1477415-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Since we can't steer multicast register reads during ring-based
workaround verification, we need to define the multicast ranges where
failure to steer could potentially cause us to read back from a
fused-off register instance.
As with gen12, we can ignore the multicast ranges that the bspec
describes as 'SQIDI' since all instances of those registers will always
be present and we'll always be able to read back a workaround value that
was written with multicast.
Bspec: 66534
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714031540.3539704-11-matthew.d.roper@intel.com
drm-misc-next for v5.15-rc1:
UAPI Changes:
- Remove sysfs stats for dma-buf attachments, as it causes a performance regression.
Previous merge is not in a rc kernel yet, so no userspace regression possible.
Cross-subsystem Changes:
- Sanitize user input in kyro's viewport ioctl.
- Use refcount_t in fb_info->count
- Assorted fixes to dma-buf.
- Extend x86 efifb handling to all archs.
- Fix neofb divide by 0.
- Document corpro,gm7123 bridge dt bindings.
Core Changes:
- Slightly rework drm master handling.
- Cleanup vgaarb handling.
- Assorted fixes.
Driver Changes:
- Add support for ws2401 panel.
- Assorted fixes to stm, ast, bochs.
- Demidlayer ingenic irq.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2d0d2fe8-01fc-e216-c3fd-38db9e69944e@linux.intel.com
The engine hw_id is only used by RING_FAULT_REG(), which is not used
by GRAPHICS_VER >= 8. We did use hw_id on recent platforms to set
the engine's guc_id, but that is not the case anymore since
commit c784e5249e ("drm/i915/guc: Update to use firmware v49.0.1"):
now we only use class and id information to generate guc_id.
We tend to keep adding new defines just to be consistent, but let's try
to remove them and let them defined to 0 for engines that only exist on
gen8+ platforms.
v2: Reword commit message and add information about when we stopped
using hw_id (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720232014.3302645-3-lucas.demarchi@intel.com
When running the GuC the GPU can't be considered idle if the GuC still
has contexts pinned. As such, a call has been added in
intel_gt_wait_for_idle to idle the UC and in turn the GuC by waiting for
the number of unpinned contexts to go to zero.
v2: rtimeout -> remaining_timeout
v3: Drop unnecessary includes, guc_submission_busy_loop ->
guc_submission_send_busy_loop, drop negatie timeout trick, move a
refactor of guc_context_unpin to earlier path (John H)
v4: Add stddef.h back into intel_gt_requests.h, sort circuit idle
function if not in GuC submission mode
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-16-matthew.brost@intel.com
Semaphores are an optimization and not required for basic GuC submission
to work properly. Disable until we have time to do the implementation to
enable semaphores and tune them for performance. Also long direction is
just to delete semaphores from the i915 so another reason to not enable
these for GuC submission.
This patch fixes an existing bugs where I915_ENGINE_HAS_SEMAPHORES was
not honored correctly.
v2: Reword commit message
v3:
(John H)
- Add text to commit indicating this also fixing an existing bug
v4:
(John H)
- s/bug/bugs
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-14-matthew.brost@intel.com
