drm_dp_dsc_sink_max_slice_count() may return 0 if something goes
wrong on the part of the DSC sink and its DPCD register. This null
value may be later used as a divisor in intel_dsc_compute_params(),
which will lead to an error.
In the unlikely event that this issue occurs, fix it by testing the
return value of drm_dp_dsc_sink_max_slice_count() against zero.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: a4a157777c ("drm/i915/dp: Compute DSC pipe config in atomic check")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418140430.69902-1-n.zhandarovich@fintech.ru
(cherry picked from commit 51f7008239)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
It was noticed that duplicate entries in the firmware table could cause
an infinite loop in the firmware loading code if that entry failed to
load. Duplicate entries are a bug anyway and so should never happen.
Ensure they don't by tweaking the table validation code to reject
duplicates.
For full m/m/p files, that can be done by simply tweaking the patch
level check to reject matching values. For reduced version entries,
the filename itself must be compared.
v2: Improve comment (review by Daniele)
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502234007.1762014-6-John.C.Harrison@Intel.com
The validation of the firmware table was being done inside the code
for scanning the table for the next available firmware blob. Which is
unnecessary. So pull it out into a separate function that is only
called once per blob type at init time.
Also, drop the CONFIG_SELFTEST requirement and make errors terminal.
It was mentioned that potential issues with backports would not be
caught by regular pre-merge CI as that only occurs on tip not stable
branches. Making the validation unconditional and failing driver load
on detecting of a problem ensures that such backports will also be
validated correctly.
This requires adding a firmware global flag to indicate an issue with
any of the per firmware tables. This is done rather than adding a new
state enum as a new enum value would be a much more invasive change -
lots of places would need updating to support the new error state.
Note also that this change means that a table error will cause the
driver to wedge even on platforms that don't require firmware files.
This is intentional as per the above backport concern - someone doing
backports is not guaranteed to test on every platform that they may
potential affect. So forcing a failure on all platforms ensures that
the problem will be noticed and corrected immediately.
v2: Change to unconditionally fail module load on a validation error
(review feedback/discussion with Daniele).
v3: Add a new flag to track table validation errors (review
feedback/discussion with Daniele).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502234007.1762014-5-John.C.Harrison@Intel.com
Pull more drm fixes from Dave Airlie:
"This is the fixes for the last couple of weeks for i915 and last 3
weeks for amdgpu, lots of them but pretty scattered around and all
pretty small.
amdgpu:
- SR-IOV fixes
- DCN 3.2 fixes
- DC mclk handling fixes
- eDP fixes
- SubVP fixes
- HDCP regression fix
- DSC fixes
- DC FP fixes
- DCN 3.x fixes
- Display flickering fix when switching between vram and gtt
- Z8 power saving fix
- Fix hang when skipping modeset
- GPU reset fixes
- Doorbell fix when resizing BARs
- Fix spurious warnings in gmc
- Locking fix for AMDGPU_SCHED IOCTL
- SR-IOV fix
- DCN 3.1.4 fix
- DCN 3.2 fix
- Fix job cleanup when CS is aborted
i915:
- skl pipe source size check
- mtl transcoder mask fix
- DSI power on sequence fix
- GuC versioning corner case fix"
* tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm: (48 commits)
drm/amdgpu: drop redundant sched job cleanup when cs is aborted
drm/amd/display: filter out invalid bits in pipe_fuses
drm/amd/display: Change default Z8 watermark values
drm/amdgpu: disable SDMA WPTR_POLL_ENABLE for SR-IOV
drm/amdgpu: add a missing lock for AMDGPU_SCHED
drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini()
drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini
drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini
drm/amdgpu: Enable doorbell selfring after resize FB BAR
drm/amdgpu: Use the default reset when loading or reloading the driver
drm/amdgpu: Fix mode2 reset for sienna cichlid
drm/i915/dsi: Use unconditional msleep() instead of intel_dsi_msleep()
drm/i915/mtl: Add the missing CPU transcoder mask in intel_device_info
drm/i915/guc: Actually return an error if GuC version range check fails
drm/amd/display: Lowering min Z8 residency time
drm/amd/display: fix flickering caused by S/G mode
drm/amd/display: Set min_width and min_height capability for DCN30
drm/amd/display: Isolate remaining FPU code in DCN32
drm/amd/display: Update bounding box values for DCN321
drm/amd/display: Do not clear GPINT register when releasing DMUB from reset
...
On g4x the hardware has only one audio/video DIP block. Thus
only one HDMI port can transmit audio/infoframes at a time.
Currently we pretend that multiple ports can do it at the same
time, but that doesn't actually work for two reasons:
- the state of the single hw block will get clobbered by
the multiple ports, leading to state checker failures
- the hardware will automagically disable audio/infoframe
transmission when enabled on multiple ports
To fix this let's allow only one of the ports to transmit
audio/infoframes at a time. We'll just go over all the HDMI
ports and pick the first one that is otherwise capable of
audio/infoframes. Further HDMI ports will be treated as if
they had a DVI sink connected.
In order to compute this consistently we'll also need to
always add all HDMI ports to the atomic state.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107194604.15227-6-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
When reduced version firmware files were added (matching major
component being the only strict requirement), the minor version was
still tracked and a notification reported if it was older. However,
the patch version should really be tracked as well for the same
reasons. The KMD can work without the change but if the effort has
been taken to release a new firmware with the change then there must
be a valid reason for doing so - important bug fix, security fix, etc.
And in that case it would be good to alert the user if they are
missing out on that new fix.
v2: Use correct patch version number and drop redunant debug print
(review by Daniele / CI results).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504202252.1104212-2-John.C.Harrison@Intel.com
The decision to use DFP output format conversion capabilities should be
during compute_config phase.
This patch uses the members of intel_dp->dfp to only store the
format conversion capabilities of the DP device and uses the crtc_state
sink_format member, to program the protocol-converter for
colorspace/format conversion.
v2: Use sink_format to determine the color conversion config for the
pcon (Ville).
v3: Fix typo: missing 'break' in switch case (lkp kernel test robot).
v4: Add helper to check if DP supports YCBCR420.
v5: Simplify logic for computing output_format, based on the given
sink_format. (Ville).
Added scaler constraint for YCbCr420 output.
v6: Split the patch for Scaler constraint for Ycbcr420.
v7: Simplify the policy for selecting output_format:
Always try for RGB first, followed by YCBCR444, and finally by YCBCR420.
v8: Removed redundant comments, minor refactoring. (Ville)
v9: Added member for ycbcr420 passthrough cap, fixed minor issues. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427125605.487769-3-ankit.k.nautiyal@intel.com
The decision to use DFP output format conversion capabilities should be
during compute_config phase.
This patch adds new member to crtc_state to represent the final
output_format to the sink. In case of a DFP this can be different than
the output_format, as per the format conversion done via the PCON.
This will help to store only the format conversion capabilities of the
DP device in intel_dp->dfp, and use crtc_state to compute and store the
configuration for color/format conversion for a given mode.
v2: modified the new member to crtc_state to represent the final
output_format that eaches the sink, after possible conversion by
PCON kind of devices. (Ville)
v3: Addressed comments from Ville:
-Added comments to clarify difference between sink_format and
output_format.
-Corrected the order of setting sink_format and output_format.
-Added readout for sink_format in get_pipe_config hooks.
v4: Set sink_format for intel_sdvo too. (Ville)
v5: Rebased.
v6: Fixed condition to go for YCbCr420 format for dp and hdmi. (Ville)
v7: Fix the condition to set sink_format for HDMI.
Set hdmi output_format simply as sink_format. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v3)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427125605.487769-2-ankit.k.nautiyal@intel.com
drm_dp_dsc_sink_max_slice_count() may return 0 if something goes
wrong on the part of the DSC sink and its DPCD register. This null
value may be later used as a divisor in intel_dsc_compute_params(),
which will lead to an error.
In the unlikely event that this issue occurs, fix it by testing the
return value of drm_dp_dsc_sink_max_slice_count() against zero.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: a4a157777c ("drm/i915/dp: Compute DSC pipe config in atomic check")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418140430.69902-1-n.zhandarovich@fintech.ru
intel_atomic_get_new_crtc_state can return NULL, unless crtc state wasn't
obtained previously with intel_atomic_get_crtc_state, so we must check it
for NULLness here, just as in many other places, where we can't guarantee
that intel_atomic_get_crtc_state was called.
We are currently getting NULL ptr deref because of that, so this fix was
confirmed to help.
Fixes: 74a75dc908 ("drm/i915/display: move plane prepare/cleanup to intel_atomic_plane.c")
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230505082212.27089-1-stanislav.lisovskiy@intel.com
Display to communicate display pipe count/CDCLK/voltage configuration
to Pcode for more accurate power accounting for DG2.
Existing sequence is only sending the voltage value to the Pcode.
Adding new sequence with current cdclk associate with voltage value masking.
Adding pcode request when any pipe power well will disable or enable.
v2: - Make intel_cdclk_need_serialize static to make CI compiler happy.
v3: - Removed redundant return(Jani Nikula)
- Changed intel_cdclk_power_usage_to_pcode_(pre|post)_notification to be
static and also naming to intel_cdclk_pcode_(pre|post)_notify(Jani Nikula)
- Changed u8 to be u16 for cdclk parameter in intel_pcode_notify function,
as according to BSpec it requires 10 bits(Jani Nikula)
- Replaced dev_priv's with i915's(Jani Nikula)
- Simplified expression in intel_cdclk_need_serialize(Jani Nikula)
- Removed redundant kernel-doc and indentation(Jani Nikula)
v4: - Fixed some checkpatch warnings
v5: - According to HW team comments that change should affect only DG2,
fix correspodent platform check to account this.
v6: - Added one more missing IS_DG2 check(Vinod Govindapillai)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504093959.12085-1-stanislav.lisovskiy@intel.com
Define and use the bitmasks for the x/y components
of the skl+ scaler window pos/size registers.
We stick to the full 16 bits mask here even though the
hardware limits are actually lower. The current (ADL)
hardware maximums are in fact: 14 bits for X size, 13 bits
for X pos, 13 bits for Y size/pos. Yes, that is correct,
X pos has less bits than the X size for some reason. But
that doesn't actually matter for now as we don't currently
even support such wide displays without the use of bigjoiner
(due to max plane width limit).
v2: Switch back to full 16bit masks since that's what
we use transcoder timign regs and PIPESRC as well
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230426135019.7603-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Define and use the bitmasks for the x/y components
of the ilk+ panel filter window pos/size registers.
Note that we stick to the full 16 bit mask even though
the actual hardware limits are lower (and somewhat
platform dependent). BDW is actually limited to
13 bits horizontal and 12 bits vertical, with the high
bits being hardwired to zero. HSW should have the same
limits as BDW. And pre-HSW should be limited to 12bits
in both directions as that's already the limit of the
transcoder timing registers. Curiously on HSW and earlier
platforms all 16 bits can actually be set, but presumably
the hardware ignores the high bits.
v2: Switch back to full 16bit masks since that's what
we use transcoder timign regs and PIPESRC as well
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230426135019.7603-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The GSC notifies us of a proxy request via the HECI2 interrupt. The
interrupt must be enabled both in the HECI layer and in our usual gt irq
programming; for the latter, the interrupt is enabled via the same enable
register as the GSC CS, but it does have its own mask register. When the
interrupt is received, we also need to de-assert it in both layers.
The handling of the proxy request is deferred to the same worker that we
use for GSC load. New flags have been added to distinguish between the
init case and the proxy interrupt.
v2: Make sure not to set the reset bit when enabling/disabling the GSC
interrupts, fix defines (Alan)
v3: rebase on proxy status register check
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502163854.317653-5-daniele.ceraolospurio@intel.com
The GSC uC needs to communicate with the CSME to perform certain
operations. Since the GSC can't perform this communication directly
on platforms where it is integrated in GT, i915 needs to transfer the
messages from GSC to CSME and back.
The proxy flow is as follow:
1 - i915 submits a request to GSC asking for the message to CSME
2 - GSC replies with the proxy header + payload for CSME
3 - i915 sends the reply from GSC as-is to CSME via the mei proxy
component
4 - CSME replies with the proxy header + payload for GSC
5 - i915 submits a request to GSC with the reply from CSME
6 - GSC replies either with a new header + payload (same as step 2,
so we restart from there) or with an end message.
After GSC load, i915 is expected to start the first proxy message chain,
while all subsequent ones will be triggered by the GSC via interrupt.
To communicate with the CSME, we use a dedicated mei component, which
means that we need to wait for it to bind before we can initialize the
proxies. This usually happens quite fast, but given that there is a
chance that we'll have to wait a few seconds the GSC work has been moved
to a dedicated WQ to not stall other processes.
v2: fix code style, includes and variable naming (Alan)
v3: add extra check for proxy status, fix includes and comments
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502163854.317653-4-daniele.ceraolospurio@intel.com
drivers/gpu/drm/i915/i915_scatterlist.h:164: warning: Function parameter or member 'release' not described in 'i915_refct_sgt_ops'
drivers/gpu/drm/i915/i915_scatterlist.h:187: warning: Function parameter or member 'rsgt' not described in 'i915_refct_sgt_put'
drivers/gpu/drm/i915/i915_scatterlist.h:198: warning: Function parameter or member 'rsgt' not described in 'i915_refct_sgt_get'
drivers/gpu/drm/i915/i915_scatterlist.h:214: warning: Function parameter or member 'rsgt' not described in '__i915_refct_sgt_init'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0b31edbb33116c8002dd1e72d3ad25efe5dd0176.1683041799.git.jani.nikula@intel.com
The comments are closer to not being kernel-doc.
drivers/gpu/drm/i915/i915_pmu.h:21: warning: cannot understand function prototype: 'enum i915_pmu_tracked_events '
drivers/gpu/drm/i915/i915_pmu.h:32: warning: cannot understand function prototype: 'enum '
drivers/gpu/drm/i915/i915_pmu.h:41: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* How many different events we track in the global PMU mask.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7656b8f58b088c108a2a32f7089329740efabba1.1683041799.git.jani.nikula@intel.com
drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'active' not described in '__i915_active_fence_init'
drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'fence' not described in '__i915_active_fence_init'
drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'fn' not described in '__i915_active_fence_init'
drivers/gpu/drm/i915/i915_active.h:89: warning: Function parameter or member 'active' not described in 'i915_active_fence_set'
drivers/gpu/drm/i915/i915_active.h:89: warning: Function parameter or member 'rq' not described in 'i915_active_fence_set'
drivers/gpu/drm/i915/i915_active.h:102: warning: Function parameter or member 'active' not described in 'i915_active_fence_get'
drivers/gpu/drm/i915/i915_active.h:122: warning: Function parameter or member 'active' not described in 'i915_active_fence_isset'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7f201c6cb715e4b3cece78ffa893a75610ecd27d.1683041799.git.jani.nikula@intel.com
The documentation is closer to not being kernel-doc, so just drop the
kernel-doc markers.
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'size' not described in '__guc_capture_bufstate'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'data' not described in '__guc_capture_bufstate'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'rd' not described in '__guc_capture_bufstate'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'wr' not described in '__guc_capture_bufstate'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'link' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'is_partial' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'eng_class' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'eng_inst' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'guc_id' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'lrca' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'reginfo' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:62: warning: wrong kernel-doc identifier on line:
* struct guc_debug_capture_list_header / struct guc_debug_capture_list
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:80: warning: wrong kernel-doc identifier on line:
* struct __guc_mmio_reg_descr / struct __guc_mmio_reg_descr_group
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:105: warning: wrong kernel-doc identifier on line:
* struct guc_state_capture_header_t / struct guc_state_capture_t /
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'is_valid' not described in '__guc_capture_ads_cache'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'ptr' not described in '__guc_capture_ads_cache'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'size' not described in '__guc_capture_ads_cache'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'status' not described in '__guc_capture_ads_cache'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'marker' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'read_ptr' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'write_ptr' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'size' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'sampled_write_ptr' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'wrap_offset' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'flush_to_file' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'buffer_full_cnt' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'reserved' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'flags' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'version' not described in 'guc_log_buffer_state'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9c210d53fdbd6da5fac42e435855d269504919d7.1683041799.git.jani.nikula@intel.com
