Instead of consulting vbt.ports[] lets just go through the
whole child device list to check whether a specific port
was declared by the VBT or not.
Note that this doesn't change anything wrt. detecting duplicate
child devices with the same port as vbt.ports[] would also always
contain exactly one of the duplicates.
v2: Include a is_port_valid() check to deal with some broken VBTs
Mention something about duplicate port detection (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230214073818.20231-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Let's make encoder->devdata (the VBT information for the port)
available on g4x+ platforms as well. Much easier when you can
just grab it there instead of trying to find it from some global
list array based on the port.
Note that (unlike DDI platforms) we don't currently require
that each DP/HDMI port is actually declared in VBT. Perhaps
in the future we may want to rethink that, but for now just
stick in a debug+FIXME as a reminder.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Display WA #1178 calls us to tweak some magic bits when doing AUX
to an external combo PHY port. Instead of looking to see if the VBT
has declared such a port (which could in theory even alias with a
declared eDP port on the same PHY) just check the real situation
based on the registered encoders.
The only slight chicken vs. egg situation here is during output
probing. But typically we'd register the eDP ports first and so
once we get to probe anything external on the combo PHY we have
already determined if it's eDP or not.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use the correct old/new topology and payload states in
intel_mst_disable_dp(). So far drm_atomic_get_mst_topology_state() it
used returned either the old state, in case the state was added already
earlier during the atomic check phase or otherwise the new state (but
the latter could fail, which can't be handled in the enable/disable
hooks). After the first patch in the patchset, the state should always
get added already during the check phase, so here we can get the
old/new states without a failure.
drm_dp_remove_payload() should use time_slots from the old payload state
and vc_start_slot in the new one. It should update the new payload
states to reflect the sink's current payload table after the payload is
removed. Pass the new topology state and the old and new payload states
accordingly.
This also fixes a problem where the payload allocations for multiple MST
streams on the same link got inconsistent after a few commits, as
during payload removal the old instead of the new payload state got
updated, so the subsequent enabling sequence and commits used a stale
payload state.
v2: Constify the old payload state pointer. (Ville)
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org # 6.1
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230206114856.2665066-4-imre.deak@intel.com
Although registers in the L3 bank/node configuration ranges are marked
as having "DEV" reset characteristics in the bspec, this appears to be a
hold-over from pre-Xe_HP platforms. In reality, these registers
maintain their values across engine resets, meaning that workarounds
and tuning settings targeting them should be placed on the GT
workaround list rather than an engine workaround list.
Note that an extra clue here is that these registers moved from the
RENDER forcewake domain to the GT forcewake domain in Xe_HP; generally
RCS/CCS engine resets should not lead to the reset of a register that
lives outside the RENDER domain.
Re-applying these registers on engine resets wouldn't actually hurt
anything, but is unnecessary and just makes it more confusing to anyone
trying to decipher how these registers really work.
v2:
- Also move DG2's Wa_14010648519 to the GT list. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209232228.859317-1-matthew.d.roper@intel.com
Replaces wm.max_level with wm.num_levels, since that generally
results in nicer looking code (for-loops can be in standard
form etc.).
Also get rid of the two different wrappers we have for this
(ilk_wm_max_level() and intel_wm_num_levels()). They don't
really do anything for us other than potentially slow things
down if the compiler actually emits the function calls every
time (num_planes*num_wm_levels*higher_level_wm_function_calls
could be a big number). The watermark code already shows up
far too prominently in cpu profiles. Though I must admit that
I didn't look at the generated code this time.
v2: Fix the ilk_wm_merge() off-by-one (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209222504.31478-1-ville.syrjala@linux.intel.com
Switch ilk+ and skl+ platforms to also setting up
wm.max_level and remove a bunch of if ladders as a result.
There will be a tiny change in the debugfs on CHV machines
that have DVFS disabled in the BIOS. Presviously debugfs
would show the latency for the DVFS level as well, but
that will no longer be the case. Which is arguably better
as that number is absolutely meaningless when DVFS can't
be enabled anyway.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209003251.32021-1-ville.syrjala@linux.intel.com
Register 0x9424 is not replicated on any platform, so it shouldn't be
declared with REG_MCR(). Declaring it with _MMIO() is basically
duplicate of the GEN7 version, so just remove the GEN8 and change all
the callers to use the right functions.
Old versions of the gen8 bspec page used to contain a table with MCR
registers, apparently implying 0x9400 - 0x94ff registers were
replicated. However that table went away and there is no information
related to the ranges for gen8 anymore. Moreover the current behavior of
the driver wouldn't do anything special for 0x9424 since there is no
equivalent table in intel_gt_mcr.c: the driver would just fallback to
intel_uncore_{read,write}(). Therefore, do not care about the possible
special case for gen8 and just use the register as non-MCR for all the
platforms.
One place doing read + write is also converted to intel_uncore_rmw().
v2: Reword commit message adding the justification wrt gen8
Fixes: a9e69428b1 ("drm/i915: Define MCR registers explicitly")
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230206165410.3056073-1-lucas.demarchi@intel.com
The UNSLICE_UNIT_LEVEL_CLKGATE register programmed by this workaround
has 'BUS' style reset, indicating that it does not lose its value on
engine resets. Furthermore, this register is part of the GT forcewake
domain rather than the RENDER domain, so it should not be impacted by
RCS engine resets. As such, we should implement this on the GT
workaround list rather than an engine list.
Bspec: 19219
Fixes: 3551ff9287 ("drm/i915/gen11: Moving WAs to rcs_engine_wa_init()")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230201222831.608281-2-matthew.d.roper@intel.com
XEHPC_LNCFMISCCFGREG0 and XEHPC_L3SCRUB are both in MCR register ranges
on PVC (with HALFBSLICE and L3BANK replication respectively), so they
should be explicitly declared as MCR registers and use MCR-aware
workaround handlers.
The workarounds/tuning settings should still be applied properly on PVC
even without the MCR annotation, but readback verification on
CONFIG_DRM_I915_DEBUG_GEM builds could potentitally give false positive
"workaround lost on load" warnings on parts fused such that a unicast
read targets a terminated register instance.
Fixes: a9e69428b1 ("drm/i915: Define MCR registers explicitly")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230201222831.608281-1-matthew.d.roper@intel.com
With backlight controller set to -1 in intel_panel_init_alloc() to
distinguish uninitialized values, and controller later being set only if
it's present in VBT, we can end up with -1 for the controller:
[drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation
frequency 200 Hz, active high, min brightness 0, level 255,
controller 4294967295
There's no harm if it happens on platforms that ignore controller due to
only one backlight controller being present, like on VLV above, but play
it safe.
Fixes: bf38bba3e7 ("drm/i915: Try to use the correct power sequencer intiially on bxt/glk")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230207111626.1839645-1-jani.nikula@intel.com
drmm_add_action_or_reset() is unaware of __iomem and the pointer needs
to be a plain void *. Cast __iomem away and back while the pointer goes
through drmm.
drivers/gpu/drm/i915/intel_uncore.c:2463:17: warning: incorrect type in argument 1 (different address spaces)
drivers/gpu/drm/i915/intel_uncore.c:2463:17: expected void volatile [noderef] __iomem *addr
drivers/gpu/drm/i915/intel_uncore.c:2463:17: got void *regs
drivers/gpu/drm/i915/intel_uncore.c:2494:16: warning: incorrect type in argument 3 (different address spaces)
drivers/gpu/drm/i915/intel_uncore.c:2494:16: expected void *data
drivers/gpu/drm/i915/intel_uncore.c:2494:16: got void [noderef] __iomem *regs
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230207124026.2105442-2-jani.nikula@intel.com
We now have some eDP+DSI dual panel systems floating around
where the DSI panel is the secondary LFP and thus needs to
consult "panel type 2" in VBT in order to locate all the
other panel type dependant stuff correctly.
To that end we need to pass in the devdata to
intel_bios_init_panel_late(), otherwise it'll just assume
we want the primary panel type. So let's try to just populate
the vbt.ports[] stuff and encoder->devdata for icl+ DSI
panels as well.
We can't do this on older platforms as there we risk a DSI
port aliasing with a HDMI/DP port, which is a totally legal
thing as the DSI ports live in their own little parallel
universe.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8016
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230207064337.18697-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
During module load the punit might still be busy with its booting
routines. During this time we try to communicate with it but we
fail because we don't receive any feedback from it and we return
immediately with a -EINVAL fatal error.
At this point the driver load is "dramatically" aborted. The
following error message notifies us about it.
i915 0000:4d:00.0: drm_WARN_ON_ONCE(timeout_base_ms > 3)
It would be enough to wait a little in order to give the punit
the chance to come up bright and shiny, ready to interact with
the driver.
Wait up 10 seconds for the punit to settle and complete any
outstanding transactions upon module load. If it still fails try
again with a longer timeout, 180s, 3 minutes. If it still fails
then return -EPROBE_DEFER, in order to give the punit a second
chance.
Even if these timers might look long, we should consider that the
punit, depending on the platforms, might need long times to
complete its routines. Besides we want to try anything possible
to move forward before deciding to abort the driver's load.
The issue has been reported in:
https://gitlab.freedesktop.org/drm/intel/-/issues/7814
The changes in this patch are valid only and uniquely during
boot. The common transactions with the punit during the driver's
normal operation are not affected.
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Co-developed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230206183236.109908-1-andi.shyti@linux.intel.com
Due to a workaround we have to make sure the WM1 watermarks block/lines
values are sensible even when WM1 is disabled. To that end we copy those
values from WM0.
However since we now keep each wm level enabled on a per-plane basis
it doesn't seem necessary to do that copy when we already have an
enabled WM1 on the current plane. That is, we might be in a situation
where another plane can only do WM0 (and thus needs the copy) but
the current plane's WM1 is still perfectly valid (ie. fits into the
current DDB allocation).
Skipping the copy could avoid reprogramming the plane's registers
needlessly in some cases.
Fixes: a301cb0fca ("drm/i915: Keep plane watermarks enabled more aggressively")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131002127.29305-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit c580c2d27a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
