The intel_dp_dsc_get_output_bpp() function outputs two lines of
unconditional logs, which was okay when it was called only once. But
now, we also call this function from intel_dp_mode_valid(), which is
in turn called for every mode we need to validate. This causes a lot
of useless noise.
Remove the unconditional prints to avoid spamming the logs. Also
remove one more print that is not unconditional, but is related.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607074433.1202917-1-luca@coelho.fi
Pull bitmap updates from Yury Norov:
- bitmap: optimize bitmap_weight() usage, from me
- lib/bitmap.c make bitmap_print_bitmask_to_buf parseable, from Mauro
Carvalho Chehab
- include/linux/find: Fix documentation, from Anna-Maria Behnsen
- bitmap: fix conversion from/to fix-sized arrays, from me
- bitmap: Fix return values to be unsigned, from Kees Cook
It has been in linux-next for at least a week with no problems.
* tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linux: (31 commits)
nodemask: Fix return values to be unsigned
bitmap: Fix return values to be unsigned
KVM: x86: hyper-v: replace bitmap_weight() with hweight64()
KVM: x86: hyper-v: fix type of valid_bank_mask
ia64: cleanup remove_siblinginfo()
drm/amd/pm: use bitmap_{from,to}_arr32 where appropriate
KVM: s390: replace bitmap_copy with bitmap_{from,to}_arr64 where appropriate
lib/bitmap: add test for bitmap_{from,to}_arr64
lib: add bitmap_{from,to}_arr64
lib/bitmap: extend comment for bitmap_(from,to)_arr32()
include/linux/find: Fix documentation
lib/bitmap.c make bitmap_print_bitmask_to_buf parseable
MAINTAINERS: add cpumask and nodemask files to BITMAP_API
arch/x86: replace nodes_weight with nodes_empty where appropriate
mm/vmstat: replace cpumask_weight with cpumask_empty where appropriate
clocksource: replace cpumask_weight with cpumask_empty in clocksource.c
genirq/affinity: replace cpumask_weight with cpumask_empty where appropriate
irq: mips: replace cpumask_weight with cpumask_empty where appropriate
drm/i915/pmu: replace cpumask_weight with cpumask_empty where appropriate
arch/x86: replace cpumask_weight with cpumask_empty where appropriate
...
i915_pmu_cpu_online() calls cpumask_weight() to check if any bit of a
given cpumask is set. We can do it more efficiently with cpumask_empty()
because cpumask_empty() stops traversing the cpumask as soon as it finds
first set bit, while cpumask_weight() counts all bits unconditionally.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Our internal teams have identified a few additional engine registers
that are worth inspecting in error state dumps during development &
debug. Let's capture and print them as part of our error dump.
For simplicity we'll just dump these registers on gen11 and beyond.
Most of these registers have existed since earlier platforms (e.g., gen6
or gen7) but were initially introduced only for a subset of the
platforms' engines; gen11 seems to be where they became available on all
engines.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601210646.615946-1-matthew.d.roper@intel.com
As with EU masks, it's easier to store subslice/DSS masks internally in
a format that's more natural for the driver to work with, and then only
covert into the u8[] uapi form when the query ioctl is invoked. Since
the hardware design changed significantly with Xe_HP, we'll use a union
to choose between the old "hsw-style" subslice masks or the newer xehp
mask. HSW-style masks will be stored in an array of u8's, indexed by
slice (there's never more than 6 subslices per slice on older
platforms). For Xe_HP and beyond where slices no longer exist, we only
need a single bitmask. However we already know that this mask is
eventually going to grow too large for a simple u64 to hold, so we'll
represent it in a manner that can be operated on by the utilities in
linux/bitmap.h.
v2:
- Fix typo: BIT(s) -> BIT(ss) in gen9_sseu_device_status()
v3:
- Eliminate sseu->ss_stride and just calculate the stride while
specifically handling uapi. (Tvrtko)
- Use BITMAP_BITS() macro to refer to size of masks rather than
passing I915_MAX_SS_FUSE_BITS directly. (Tvrtko)
- Report compute/geometry DSS masks separately when dumping Xe_HP SSEU
info. (Tvrtko)
- Restore dropped range checks to intel_sseu_has_subslice(). (Tvrtko)
v4:
- Make the bitmap size macro check the size of the .xehp field rather
than the containing union. (Tvrtko)
- Don't add GEM_BUG_ON() intel_sseu_has_subslice()'s check for whether
slice or subslice ID exceed sseu->max_[sub]slices; various loops
in the driver are expected to exceed these, so we should just
silently return 'false.'
v5:
- Move XEHP_BITMAP_BITS() to the header so that we can also replace a
usage of I915_MAX_SS_FUSE_BITS in one of the inline functions.
(Bala)
- Change the local variable in intel_slicemask_from_xehp_dssmask() from
u16 to 'unsigned long' to make it a bit more future-proof.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601150725.521468-6-matthew.d.roper@intel.com
Storing the EU mask internally in the same format the I915_QUERY
topology queries use makes the final copy_to_user() a bit simpler, but
makes the rest of the driver's SSEU more complicated and harder to
follow. Let's switch to an internal representation that's more natural:
Xe_HP platforms will be a simple array of u16 masks, whereas pre-Xe_HP
platforms will be a two-dimensional array, indexed by [slice][subslice].
We'll convert to the uapi format only when the query uapi is called.
v2:
- Drop has_common_ss_eumask. We waste some space repeating identical
EU masks for every single DSS, but the code is simpler without it.
(Tvrtko)
v3:
- Mask down EUs passed to sseu_set_eus at the callsite rather than
inside the function. (Tvrtko)
- Eliminate sseu->eu_stride and calculate it when needed. (Tvrtko)
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601150725.521468-5-matthew.d.roper@intel.com
Slice/subslice/EU information should be obtained via the topology
queries provided by the I915_QUERY interface; let's turn off support for
the old GETPARAM lookups on Xe_HP and beyond where we can't return
meaningful values.
The slice mask lookup is meaningless since Xe_HP doesn't support
traditional slices (and we make no attempt to return the various new
units like gslices, cslices, mslices, etc.) here.
The subslice mask lookup is even more problematic; given the distinct
masks for geometry vs compute purposes, the combined mask returned here
is likely not what userspace would want to act upon anyway. The value
is also limited to 32-bits by the nature of the GETPARAM ioctl which is
sufficient for the initial Xe_HP platforms, but is unable to convey the
larger masks that will be needed on other upcoming platforms. Finally,
the value returned here becomes even less meaningful when used on
multi-tile platforms where each tile will have its own masks.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> # mesa
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601150725.521468-3-matthew.d.roper@intel.com
Pull vfio updates from Alex Williamson:
- Improvements to mlx5 vfio-pci variant driver, including support for
parallel migration per PF (Yishai Hadas)
- Remove redundant iommu_present() check (Robin Murphy)
- Ongoing refactoring to consolidate the VFIO driver facing API to use
vfio_device (Jason Gunthorpe)
- Use drvdata to store vfio_device among all vfio-pci and variant
drivers (Jason Gunthorpe)
- Remove redundant code now that IOMMU core manages group DMA ownership
(Jason Gunthorpe)
- Remove vfio_group from external API handling struct file ownership
(Jason Gunthorpe)
- Correct typo in uapi comments (Thomas Huth)
- Fix coccicheck detected deadlock (Wan Jiabing)
- Use rwsem to remove races and simplify code around container and kvm
association to groups (Jason Gunthorpe)
- Harden access to devices in low power states and use runtime PM to
enable d3cold support for unused devices (Abhishek Sahu)
- Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)
- Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)
- Pass KVM pointer directly rather than via notifier (Matthew Rosato)
* tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio: (38 commits)
vfio: remove VFIO_GROUP_NOTIFY_SET_KVM
vfio/pci: Add driver_managed_dma to the new vfio_pci drivers
vfio: Do not manipulate iommu dma_owner for fake iommu groups
vfio/pci: Move the unused device into low power state with runtime PM
vfio/pci: Virtualize PME related registers bits and initialize to zero
vfio/pci: Change the PF power state to D0 before enabling VFs
vfio/pci: Invalidate mmaps and block the access in D3hot power state
vfio: Change struct vfio_group::container_users to a non-atomic int
vfio: Simplify the life cycle of the group FD
vfio: Fully lock struct vfio_group::container
vfio: Split up vfio_group_get_device_fd()
vfio: Change struct vfio_group::opened from an atomic to bool
vfio: Add missing locking for struct vfio_group::kvm
kvm/vfio: Fix potential deadlock problem in vfio
include/uapi/linux/vfio.h: Fix trivial typo - _IORW should be _IOWR instead
vfio/pci: Use the struct file as the handle not the vfio_group
kvm/vfio: Remove vfio_group from kvm
vfio: Change vfio_group_set_kvm() to vfio_file_set_kvm()
vfio: Change vfio_external_check_extension() to vfio_file_enforced_coherent()
vfio: Remove vfio_external_group_match_file()
...
Some machines declare DRRS type = seamless, DRRS = no, DMRRS = yes.
I *think* DMRRS stands for "dynamcic media refresh rate", and
I suspect the way it's meant to work is that it lets the driver
switch refresh rates to match the frame rate for media playback.
Obviously for us all that kind of policy stuff is entirely up to
userspace, so the only thing we may do is make the extra refresh
rate(s) available.
So let's treat this case as just static DRRS for now. In the
future We might want to differentiate the "seamless w/ downclocking"
vs. "seamless w/o downclocking" cases so that we could do seamless
refresh rate changes for systems that only claim to support DMRRS.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/125
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220531191844.11313-7-ville.syrjala@linux.intel.com
For PVC, the base die and compute tile have separate stepping values
that we need to track; we'll use the existing graphics_step field to
represent the compute tile stepping and add a new 'basedie_step' field.
Unlike past platforms, steppings for these components are represented by
specific bitfields within the PCI revision ID, and we shouldn't make
assumptions about the non-CT, non-BD bits staying 0. Let's update our
stepping code accordingly.
Bspec: 44484
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220527163348.1936146-2-matthew.d.roper@intel.com
Commit 30e114ef4b ("drm/i915/tc: Check for DP-alt, legacy sinks before
taking PHY ownership") defaults any disconnected Type-C ports to TBT-alt
mode which presents a problem (which could most likely result in a system
hang) when userspace forces a modeset on a Type-C port that is wired for
legacy HDMI. The following warning is seen when Weston forces a modeset
on a disconnected legacy Type-C port (HDMI) on a TGL based Gigabyte system:
(https://www.gigabyte.com/Mini-PcBarebone/GB-BSi3-1115G4-rev-10#ov)
Missing case (clock == 173000)
WARNING: CPU: 1 PID: 438 at drivers/gpu/drm/i915/display/intel_ddi.c:245
icl_ddi_tc_enable_clock.cold+0x16a/0x1cf [i915]
CPU: 1 PID: 438 Comm: kworker/u8:3 Tainted: G U W E
5.18.0-rc5-drm-tip+ #20
Hardware name: GIGABYTE GB-BSi3-1115G4/GB-BSi3-1115G4, BIOS F9
10/16/2021
Workqueue: i915_modeset intel_atomic_commit_work [i915]
RIP: 0010:icl_ddi_tc_enable_clock.cold+0x16a/0x1cf [i915]
Code: 74 6c 7f 10 81 fd d0 78 02 00 74 6d 81 fd b0 1e 04 00 74 70 48 63
d5 48 c7 c6 c0 7b ab c0 48 c7 c7 20 75 ab c0 e8 b8 b5 c1 f0 <0f> 0b 45
31 ed e9 fb fe ff ff 49 63 d5
48 c7 c6 80 7b ab c0 48 c7
RSP: 0018:ffff8882522c78f0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffffed104a458f10
RBP: 0000000000011558 R08: ffffffffb078de4e R09: ffff888269ca748b
R10: ffffed104d394e91 R11: 0000000000000000 R12: ffff888255a318f8
R13: 0000000000000002 R14: ffff888255a30000 R15: ffff88823ef00348
FS: 0000000000000000(0000) GS:ffff888269c80000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd7afa42000 CR3: 0000000255c02004 CR4: 00000000007706e0
PKRU: 55555554
Call Trace:
<TASK>
intel_ddi_pre_enable.cold+0x96/0x5bf [i915]
intel_encoders_pre_enable+0x10e/0x140 [i915]
hsw_crtc_enable+0x207/0x99d [i915]
? ilk_crtc_enable.cold+0x2a/0x2a [i915]
? prepare_to_wait_exclusive+0x120/0x120
intel_enable_crtc+0x9a/0xf0 [i915]
skl_commit_modeset_enables+0x466/0x820 [i915]
? intel_commit_modeset_enables+0xd0/0xd0 [i915]
? intel_mbus_dbox_update+0x1ed/0x250 [i915]
intel_atomic_commit_tail+0xf2d/0x3040 [i915]
_raw_spin_lock_irqsave+0x87/0xe0
_raw_read_unlock_irqrestore+0x40/0x40
__update_load_avg_cfs_rq+0x70/0x5c0
__i915_sw_fence_complete+0x85/0x3b0 [i915]
? intel_get_crtc_new_encoder+0x190/0x190 [i915]
? sysvec_irq_work+0x13/0x90
? asm_sysvec_irq_work+0x12/0x20
? _raw_spin_lock_irq+0x82/0xd0
? read_word_at_a_time+0xe/0x20
? process_one_work+0x393/0x690
process_one_work+0x393/0x690
worker_thread+0x2b7/0x620
? process_one_work+0x690/0x690
kthread+0x15a/0x190
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
Continuing with the modeset without setting the DDI clock results in
more warnings and eventually a system hang. This does not seem to
happen with disconnected legacy or DP-alt DP ports because the clock
rate defaults to 162000 (which is a valid TBT clock) during the link
training process. Therefore, to fix this issue, this patch avoids
setting disconnected Type-C legacy ports to TBT-alt mode which prevents
the selection of TBT PLL when a modeset is forced.
v2: (Imre)
- Retain the check for legacy hotplug live status to account for
incorrect VBTs.
Cc: Imre Deak <imre.deak@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220526001939.4031112-2-vivek.kasireddy@intel.com
Move the panel specific VBT parsing to happen during the
output probing stage. Needs to be done because the VBT
parsing will need to look at the EDID to determine
the correct panel_type on some machines.
We split the parsed VBT data (i915->vbt) along the same
boundary. For the moment we just hoist all the panel
specific stuff into connector->panel.vbt since that seems
like the most convenient place for eg. the backlight code.
Note that we simply drop the drrs type check from
intel_drrs_frontbuffer_update() since that operates on the whole
device rather than a specific connector/encoder. But the check
was just a micro optimization so removing it doesn't actually
mattter for correctness.
TODO: Lot's of cleanup to be done in the future. Eg. most of
the DSI stuff could probably be eliminated entirely and just
parsed on demand during DSI init.
v2: Note the intel_drrs_frontbuffer_update() change
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-13-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Disable the delayed VDD off work during the eDP probe.
If we never turn off the VDD then we can't violate the
panel's power sequencing delays despite not having read
them out yet from the VBT.
This is mostly a belt+suspenders type of thing since the
the timeout we'd use for the delayed work should be long
enough that this won't normally happen. But I don't really
like relying on timeouts for correctless so might as well
make sure.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-10-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
