The commit 010c8bbad2 ("drm: msm: adreno: Disable preemption on Adreno
510") tried to check GPU's revn before revn being set. Add WARN_ON_ONCE
to prevent such bugs from happening again. A separate helper is
necessary so that the warning is displayed really just once instead of
being displayed for each of comparisons.
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/531705/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The commit 010c8bbad2 ("drm: msm: adreno: Disable preemption on Adreno
510") added special handling for a510 (this SKU doesn't seem to support
preemption, so the driver should clamp nr_rings to 1). However the
gpu->revn is not yet set (it is set later, in adreno_gpu_init()) and
thus the condition is always false. Check config->rev instead.
Fixes: 010c8bbad2 ("drm: msm: adreno: Disable preemption on Adreno 510")
Reported-by: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Adam Skladowski <a39.skl@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/531511/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Allow access to CP_PERFCTR_CP_SEL[n] and RB_PERFCTR_RB_SEL which are
used by fdperf and pps-provider (perfetto).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Core:
- Add Marijn Suijten as drm/msm reviewer
- Adreno A660 bindings
- SM8350 MDSS bindings fix
DP:
- Removed obsolete USB-PD remains
- Documented DP compatible string for sm8550 platform
DPU:
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x, sc8280xp, sm8450
- Enabled writeback on sc7280
- Enabled DSC on msm8998
- Native HDMI output support
- Dropped unused features: regdma, GC, IGC
- Fixed the DSC flush operations
- Simplified QoS handling, removing obsolete and unused features and merging
SSPP and WB code paths
- Reworked dpu_encoder initialisation path
DSI:
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Dropped powerup quirks in favour of using pre_enable_prev_first for
downstream bridges
- Fixed 14nm DSI PHY programming
MDP5:
- Added support for display controller on MSM8226 platform
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The internal_hpd flag is set to true by dp_bridge_hpd_enable() and set to
false by dp_bridge_hpd_disable() to handle GPIO pinmuxed into DP controller
case. HDP related interrupts can not be enabled until internal_hpd is set
to true. At current implementation dp_display_config_hpd() will initialize
DP host controller first followed by enabling HDP related interrupts if
internal_hpd was true at that time. Enable HDP related interrupts depends on
internal_hpd status may leave system with DP driver host is in running state
but without HDP related interrupts being enabled. This will prevent external
display from being detected. Eliminated this dependency by moving HDP related
interrupts enable/disable be done at dp_bridge_hpd_enable/disable() directly
regardless of internal_hpd status.
Changes in V3:
-- dp_catalog_ctrl_hpd_enable() and dp_catalog_ctrl_hpd_disable()
-- rewording ocmmit text
Changes in V4:
-- replace dp_display_config_hpd() with dp_display_host_start()
-- move enable_irq() at dp_display_host_start();
Changes in V5:
-- replace dp_display_host_start() with dp_display_host_init()
Changes in V6:
-- squash remove enable_irq() and disable_irq()
Fixes: cd198cadde ("drm/msm/dp: Rely on hpd_enable/disable callbacks")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Tested-by: Leonard Lausen <leonard@lausen.nl> # on sc7180 lazor
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Tested-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/1684878756-17830-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
MSM8998 doesn't have DSC blocks declared in the catalog. Complete DSC
1.1 support for all platforms by adding the missing blocks to MSM8998.
Changes in v9:
-- add MSM8998 and SC8180x to commit title
Changes in v10:
-- fix grammar at commit text
Changes in v12:
-- fix "titil" with "title" at changes in v9
Changes in v14:
-- "dsc" tp "DSC" at commit title
Changes in v15:
-- fix merge conflicts at dpu_5_1_sc8180x.h
Changes in v16
-- fix cherry-pick error by deleting both redundant .dsc and .dsc_count
assignment from dpu_5_1_sc8180x.h
Changes in v17
-- remove sc8180x from both commit title and text
-- remove Reviewed-by
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/541371/
Link: https://lore.kernel.org/r/1686082272-22191-1-git-send-email-quic_khsieh@quicinc.com
[DB: fixed commit message as agreed in the email discussion]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The clk_bulk API already provides error messages indicating which
specific clock in the request for which the operation failed, further
more these errors are associated with the specific DisplayPort
controller (rather than the shared drm_device). The additional error
messages int he dp_power module does thereby not provide any benefit.
While at it, none of the dp_power handles passed to these functions are
dynamic in nature, so there should not be any need for runtime checking
them. Drop these as well.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/536938/
Link: https://lore.kernel.org/r/20230515030256.300104-2-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
MSM8226 uses a modified PLL lock sequence compared to MSM8974, which is
based on the function dsi_pll_enable_seq_m in the msm-3.10 kernel.
Worth noting that the msm-3.10 downstream kernel also will try other
sequences in case this one doesn't work, but during testing it has shown
that the _m sequence succeeds first time also:
.pll_enable_seqs[0] = dsi_pll_enable_seq_m,
.pll_enable_seqs[1] = dsi_pll_enable_seq_m,
.pll_enable_seqs[2] = dsi_pll_enable_seq_d,
.pll_enable_seqs[3] = dsi_pll_enable_seq_d,
.pll_enable_seqs[4] = dsi_pll_enable_seq_f1,
.pll_enable_seqs[5] = dsi_pll_enable_seq_c,
.pll_enable_seqs[6] = dsi_pll_enable_seq_e,
We may need to expand this in the future.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/540618/
Link: https://lore.kernel.org/r/20230308-msm8226-mdp-v3-6-b6284145d67a@z3ntu.xyz
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently DSC flushing happens during interface configuration at
dpu_hw_ctl_intf_cfg_v1(). Separate DSC flush away from
dpu_hw_ctl_intf_cfg_v1() by adding dpu_hw_ctl_update_pending_flush_dsc_v1()
to handle both per-DSC engine and DSC flush bits at same time to make it
consistent with the location of flush programming of other DPU sub-blocks.
Changes in v10:
-- rewording commit text
-- pass ctl directly instead of dpu_enc to dsc_pipe_cfg()
-- ctx->pending_dsc_flush_mask = 0;
Changes in v11:
-- add Fixes tag
Changes in v12:
-- move dsc parameter to next line at dpu_encoder_dsc_pipe_cfg()
Changes in v14:
-- Fixes tag had been move to 1st patch of this series
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539506/
Link: https://lore.kernel.org/r/1685036458-22683-9-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
There are two tiers of pending flush control, top level and
individual hardware block. Currently only the top level of
flush mask is reset to 0 but the individual pending flush masks
of particular hardware blocks are left at their previous values,
eventually accumulating all possible bit values and typically
flushing more than necessary.
Reset all individual hardware block flush masks to 0 to avoid
accidentally flushing them.
Changes in V13:
-- rewording commit text
-- add an empty space line as suggested
Changes in V14:
-- add Fixes tag
Fixes: 73bfb790ac ("msm:disp:dpu1: setup display datapath for SC7180 target")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539508/
Link: https://lore.kernel.org/r/1685036458-22683-8-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Disabling the crossbar mux between DSC and PINGPONG currently
requires a bogus enum dpu_pingpong value to be passed when calling
dsc_bind_pingpong_blk() with enable=false, even though the register
value written is independent of the current PINGPONG block. Replace
that `bool enable` parameter with a new PINGPONG_NONE dpu_pingpong
flag that triggers the write of the "special" 0xF "crossbar
disabled" value to the register instead.
Changes in v4:
-- more details to commit text
Changes in v5:
-- rewording commit text suggested by Marijn
-- add DRM_DEBUG_KMS for DSC unbinding case
Changes in v8:
-- fix checkpatch warning
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539505/
Link: https://lore.kernel.org/r/1685036458-22683-6-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
DPU < 7.0.0 has DPU_PINGPONG_DSC feature bit set to indicate it requires
both dpu_hw_pp_setup_dsc() and dpu_hw_pp_dsc_{enable,disable}() to be
executed to complete DSC configuration if DSC hardware block is present.
Hence test DPU_PINGPONG_DSC feature bit and assign DSC related functions
to the ops of PINGPONG block accordingly if DPU_PINGPONG_DSC bit is set.
Changes in v6:
-- split patches, this patch has function handles DPU_PINGPONG_DSC bit
Changes in v9:
-- the original code of assigning dsc related functions to the ops of
pingpong block without testing the DPU_PINGPONG_DSC feature bit was
restored back due to rebase error which defeat the purpose of this
patch. Remove those error code.
Changes in v10:
-- change commit title
-- correct texts at changes in v9
Changes in v12:
-- fixed length too long at Changes in v9
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539504/
Link: https://lore.kernel.org/r/1685036458-22683-5-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
DPU < 7.0.0 requires the PINGPONG block to be involved during
DSC setting up. Since DPU >= 7.0.0, enabling and starting the DSC
encoder engine was moved to INTF with the help of the flush mechanism.
Add a DPU_PINGPONG_DSC feature bit to restrict the availability of
dpu_hw_pp_setup_dsc() and dpu_hw_pp_dsc_{enable,disable}() on the
PINGPONG block to DPU < 7.0.0 hardware, as the registers are not
available on DPU 7.0.0 and higher anymore.
Add DPU_PINGPONG_DSC to PINGPONG_SDM845_MASK, PINGPONG_SDM845_TE2_MASK
and PINGPONG_SM8150_MASK which is used for all DPU < 7.0 chipsets.
changes in v6:
-- split patches and rearrange to keep catalog related files at this patch
changes in v7:
-- rewording commit text as suggested at review comments
changes in v9:
-- delete BIT(DPU_PINGPONG_DSC) from PINGPONG_SDM845_TE2_MASK
changes in v10:
-- correct order of commit text
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539502/
Link: https://lore.kernel.org/r/1685036458-22683-4-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
