Commit Graph

1163 Commits

Author SHA1 Message Date
Christian König
73511edf8b dma-buf: specify usage while adding fences to dma_resv obj v7
Instead of distingting between shared and exclusive fences specify
the fence usage while adding fences.

Rework all drivers to use this interface instead and deprecate the old one.

v2: some kerneldoc comments suggested by Daniel
v3: fix a missing case in radeon
v4: rebase on nouveau changes, fix lockdep and temporary disable warning
v5: more documentation updates
v6: separate internal dma_resv changes from this patch, avoids to
    disable warning temporary, rebase on upstream changes
v7: fix missed case in lima driver, minimize changes to i915_gem_busy_ioctl

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-3-christian.koenig@amd.com
2022-04-07 12:53:53 +02:00
Christian König
c8d4c18bfb dma-buf/drivers: make reserving a shared slot mandatory v4
Audit all the users of dma_resv_add_excl_fence() and make sure they
reserve a shared slot also when only trying to add an exclusive fence.

This is the next step towards handling the exclusive fence like a
shared one.

v2: fix missed case in amdgpu
v3: and two more radeon, rename function
v4: add one more case to TTM, fix i915 after rebase

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406075132.3263-2-christian.koenig@amd.com
2022-04-06 17:38:25 +02:00
Maxime Ripard
3454f01abf drm/vc4: hvs: Use pointer to HVS in HVS_READ and HVS_WRITE macros
Those macros are really about the HVS itself, and thus its associated
structure vc4_hvs, rather than the entire (virtual) vc4 device.

Let's change those macros to use the hvs pointer directly, and change
the calling sites accordingly.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-8-maxime@cerno.tech
2022-04-06 15:18:01 +02:00
Maxime Ripard
d65661ace1 drm/vc4: kms: Ignore atomic_flush if we're disabled
atomic_flush will be called for each CRTC even if they aren't enabled.

The whole code we have there will thus run without a properly affected
channel, which can then result in all sorts of weird behaviour.

Fortunately, the DRM_PLANE_COMMIT_ACTIVE_ONLY flag will skip the CRTC
atomic_begin and atomic_flush, and the planes atomic_update, if they
aren't enabled.

Our plane atomic_update is a nop, and atomic_begin will copy the current
HVS channel to the vc4_crtc structure for the interrupt handler to
consume, but the handler won't run if the CRTC is disabled. So in the
end, it will only skip our CRTC atomic_flush, which is what we want.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-7-maxime@cerno.tech
2022-04-06 15:18:01 +02:00
Maxime Ripard
4dfcaa0916 drm/vc4: hvs: Move the dlist setup to its own function
The vc4_hvs_update_dlist function mostly deals with setting up the
vblank events and setting up the dlist entry pointer to our current
active one.

We'll want to do the former separately from the vblank handling in later
patches, so let's move it to a function of its own.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-6-maxime@cerno.tech
2022-04-06 15:18:01 +02:00
Maxime Ripard
a7609858bf drm/vc4: hvs: Remove dlist setup duplication
Setting the DISPLISTx register needs to occur in every case, and we
don't need to protect the register using the event_lock, so we can just
move it after the if branches and simplify a bit the function.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-5-maxime@cerno.tech
2022-04-06 15:18:01 +02:00
Maxime Ripard
e418639d19 drm/vc4: hvs: Store channel in variable
The assigned_channel field of our vc4_crtc_state structure is accessed
multiple times in vc4_hvs_atomic_flush, so let's move it to a variable
that can be used in all those places.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-4-maxime@cerno.tech
2022-04-06 15:18:01 +02:00
Maxime Ripard
b51cd7ad14 drm/vc4: hvs: Fix frame count register readout
In order to get the field currently being output, the driver has been
using the display FIFO frame count in the HVS, reading a 6-bit field at
the offset 12 in the DISPSTATx register.

While that field is indeed at that location for the FIFO 1 and 2, the
one for the FIFO0 is actually in the DISPSTAT1 register, at the offset
18.

Fixes: e538092cb1 ("drm/vc4: Enable precise vblank timestamping for interlaced modes.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-3-maxime@cerno.tech
2022-04-06 15:18:01 +02:00
Maxime Ripard
748acfc98a drm/vc4: kms: Take old state core clock rate into account
During a commit, the core clock, which feeds the HVS, needs to run at
a minimum of 500MHz.

While doing that commit, we can also change the mode to one that
requires a higher core clock, so we take the core clock rate associated
to that new state into account for that boost.

However, the old state also needs to be taken into account if it
requires a core clock higher that the new one and our 500MHz limit,
since it's still live in hardware at the beginning of our commit.

Fixes: 16e101051f ("drm/vc4: Increase the core clock based on HVS load")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-2-maxime@cerno.tech
2022-04-06 15:18:01 +02:00
Maxime Ripard
fd5894fa24 drm/vc4: hdmi: Remove clock rate initialization
Now that the clock driver makes sure we never end up with a rate of 0,
the HDMI driver doesn't need to care anymore.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220225143534.405820-13-maxime@cerno.tech
2022-04-06 12:41:54 +02:00
Maxime Ripard
5b6ef06ea6 drm/vc4: Add logging and comments
The HVS core clock isn't really obvious, so let's add a bunch more
comments and some logging for easier debugging.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220225143534.405820-12-maxime@cerno.tech
2022-04-06 12:41:54 +02:00
Maxime Ripard
9cbbd694a5 Merge drm/drm-next into drm-misc-next
Let's start the 5.19 development cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-04-05 11:06:58 +02:00
Maxime Ripard
66bfe59dd3 drm/vc4: Implement atomic_print_state for HVS channel state
The HVS state configuration is useful when debugging what's going on in
the vc4 hardware pipeline. Add an implementation of .atomic_print_state.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220328124304.2309418-5-maxime@cerno.tech
2022-03-31 10:19:45 +02:00
Maxime Ripard
220f125cd5 drm/vc4: Constify private state accessors
None of those helpers modify the pointed data, let's make them const.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220328124304.2309418-4-maxime@cerno.tech
2022-03-31 10:19:45 +02:00
Linus Torvalds
266d17a8c0 Merge tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
 "Here is the set of driver core changes for 5.18-rc1.

  Not much here, primarily it was a bunch of cleanups and small updates:

   - kobj_type cleanups for default_groups

   - documentation updates

   - firmware loader minor changes

   - component common helper added and take advantage of it in many
     drivers (the largest part of this pull request).

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits)
  Documentation: update stable review cycle documentation
  drivers/base/dd.c : Remove the initial value of the global variable
  Documentation: update stable tree link
  Documentation: add link to stable release candidate tree
  devres: fix typos in comments
  Documentation: add note block surrounding security patch note
  samples/kobject: Use sysfs_emit instead of sprintf
  base: soc: Make soc_device_match() simpler and easier to read
  driver core: dd: fix return value of __setup handler
  driver core: Refactor sysfs and drv/bus remove hooks
  driver core: Refactor multiple copies of device cleanup
  scripts: get_abi.pl: Fix typo in help message
  kernfs: fix typos in comments
  kernfs: remove unneeded #if 0 guard
  ALSA: hda/realtek: Make use of the helper component_compare_dev_name
  video: omapfb: dss: Make use of the helper component_compare_dev
  power: supply: ab8500: Make use of the helper component_compare_dev
  ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of
  iommu/mediatek: Make use of the helper component_compare/release_of
  drm: of: Make use of the helper component_release_of
  ...
2022-03-28 12:41:28 -07:00
Maxime Ripard
e769a3504e drm/vc4: hdmi: Support HDMI YUV output
In addition to the RGB444 output, the BCM2711 HDMI controller supports
the YUV444 and YUV422 output formats.

Let's add support for them in the driver, but still use RGB as the
preferred format.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-8-maxime@cerno.tech
2022-03-24 13:44:00 +01:00
Maxime Ripard
dd39d024a8 drm/vc4: hdmi: Always try to have the highest bpc
Currently we take the max_bpc property as the bpc value and do not try
anything else.

However, what the other drivers seem to be doing is that they would try
with the highest bpc allowed by the max_bpc property and the hardware
capabilities, test if it results in an acceptable configuration, and if
not decrease the bpc and try again.

Let's use the same logic.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-7-maxime@cerno.tech
2022-03-24 13:44:00 +01:00
Maxime Ripard
f785dcfc59 drm/vc4: hdmi: Take bpp into account for the scrambler
The current code only base its decision for whether the scrambler must be
enabled or not on the pixel clock of the mode, but doesn't take the bits
per color into account.

Let's leverage the new function to compute the clock rate in the
scrambler setup code.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-6-maxime@cerno.tech
2022-03-24 13:44:00 +01:00
Maxime Ripard
15a809211a drm/vc4: hdmi: Take the sink maximum TMDS clock into account
In the function that validates that the clock isn't too high, we've only
taken our controller limitations into account so far.

However, the sink can have a limit on the maximum TMDS clock it can deal
with too which is exposed through the EDID and the drm_display_info.

Make sure we check it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-5-maxime@cerno.tech
2022-03-24 13:44:00 +01:00
Maxime Ripard
595dcf4eb8 drm/vc4: hdmi: Move clock calculation into its own function
The code to compute our clock rate for a given setup will be called in
multiple places in the next patches, so let's create a separate function
for it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-4-maxime@cerno.tech
2022-03-24 13:44:00 +01:00
Maxime Ripard
ccbf364f32 drm/vc4: hdmi: Move clock validation to its own function
Our code is doing the same clock rate validation in multiple instances.
Let's create a helper to share the rate validation.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-3-maxime@cerno.tech
2022-03-24 13:43:59 +01:00
Maxime Ripard
6135ee0770 drm/vc4: hdmi: Rename pixel_rate variable
The pixel_rate field in the vc4_hdmi_connector_state struct actually
stores the TMDS character rate, let's rename it for consistency.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-2-maxime@cerno.tech
2022-03-24 13:43:59 +01:00
Melissa Wen
044feb9748 drm/vc4: add tracepoints for CL submissions
Trace submit_cl_ioctl and related IRQs for CL submission and bin/render
jobs execution. It might be helpful to get a rendering timeline and
track job throttling.

Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201212651.zhltjmaokisffq3x@mail.igalia.com
2022-03-17 15:12:25 +01:00
Greg Kroah-Hartman
4a248f85b3 Merge 5.17-rc6 into driver-core-next
We need the driver core fix in here as well for future changes.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-28 07:45:41 +01:00
Dave Airlie
6c64ae228f Backmerge tag 'v5.17-rc6' into drm-next
This backmerges v5.17-rc6 so I can merge some amdgpu and some tegra changes on top.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-02-28 14:57:14 +10:00
Yong Wu
947f019e42 drm/vc4: Make use of the helper component_compare_dev
Use the common compare helper from component.

Cc: Emma Anholt <emma@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20220214060819.7334-18-yong.wu@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-25 12:16:13 +01:00
Dave Airlie
54f43c17d6 Merge tag 'drm-misc-next-2022-02-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.18:

UAPI Changes:

Cross-subsystem Changes:
- Split out panel-lvds and lvds dt bindings .
- Put yes/no on/off disabled/enabled strings in linux/string_helpers.h
  and use it in drivers and tomoyo.
- Clarify dma_fence_chain and dma_fence_array should never include eachother.
- Flatten chains in syncobj's.
- Don't double add in fbdev/defio when page is already enlisted.
- Don't sort deferred-I/O pages by default in fbdev.

Core Changes:
- Fix missing pm_runtime_put_sync in bridge.
- Set modifier support to only linear fb modifier if drivers don't
  advertise support.
- As a result, we remove allow_fb_modifiers.
- Add missing clear for EDID Deep Color Modes in drm_reset_display_info.
- Assorted documentation updates.
- Warn once in drm_clflush if there is no arch support.
- Add missing select for dp helper in drm_panel_edp.
- Assorted small fixes.
- Improve fb-helper's clipping handling.
- Don't dump shmem mmaps in a core dump.
- Add accounting to ttm resource manager, and use it in amdgpu.
- Allow querying the detected eDP panel through debugfs.
- Add helpers for xrgb8888 to 8 and 1 bits gray.
- Improve drm's buddy allocator.
- Add selftests for the buddy allocator.

Driver Changes:
- Add support for nomodeset to a lot of drm drivers.
- Use drm_module_*_driver in a lot of drm drivers.
- Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau,
  bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86.
- Add bridge/it6505.
- Create DP and DVI-I connectors in ast.
- Assorted nouveau backlight fixes.
- Rework amdgpu reset handling.
- Add dt bindings for ingenic,jz4780-dw-hdmi.
- Support reading edid through aux channel in ingenic.
- Add a drm driver for Solomon SSD130x OLED displays.
- Add simple support for sharp LQ140M1JW46.
- Add more panels to nt35560.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/686ec871-e77f-c230-22e5-9e3bb80f064a@linux.intel.com
2022-02-25 05:50:18 +10:00
Dave Airlie
753a64c779 Merge tag 'drm-misc-fixes-2022-02-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
* edid: Always set RGB444
 * imx/dcss: Select GEM CMA helpers
 * radeon: Fix some variables's type
 * vc4: Fix codec cleanup; Fix PM reference counting

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YhaKj4zWJ42YWRts@linux-uq9g.fritz.box
2022-02-24 13:53:13 +10:00
Ville Syrjälä
d8a8cf8242 drm/vc4: Use drm_mode_copy()
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Cc: Emma Anholt <emma@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-18-ville.syrjala@linux.intel.com
2022-02-21 09:54:28 +01:00
Maxime Ripard
6764eb690e drm/vc4: crtc: Fix runtime_pm reference counting
At boot on the BCM2711, if the HDMI controllers are running, the CRTC
driver will disable itself and its associated HDMI controller to work
around a hardware bug that would leave some pixels stuck in a FIFO.

In order to avoid that issue, we need to run some operations in lockstep
between the CRTC and HDMI controller, and we need to make sure the HDMI
controller will be powered properly.

However, since we haven't enabled it through KMS, the runtime_pm state
is off at this point so we need to make sure the device is powered
through pm_runtime_resume_and_get, and once the operations are complete,
we call pm_runtime_put.

However, the HDMI controller will do that itself in its
post_crtc_powerdown, which means we'll end up calling pm_runtime_put for
a single pm_runtime_get, throwing the reference counting off. Let's
remove the pm_runtime_put call in the CRTC code in order to have the
proper counting.

Fixes: bca10db67b ("drm/vc4: crtc: Make sure the HDMI controller is powered when disabling")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203102003.1114673-1-maxime@cerno.tech
2022-02-17 17:27:59 +01:00
Maxime Ripard
e40945ab7c drm/vc4: hdmi: Unregister codec device on unbind
On bind we will register the HDMI codec device but we don't unregister
it on unbind, leading to a device leakage. Unregister our device at
unbind.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127111452.222002-1-maxime@cerno.tech
2022-02-17 17:27:54 +01:00
Minghao Chi (CGEL ZTE)
9cbe89ede5 drm/vc4: Use of_device_get_match_data()
Use of_device_get_match_data() to simplify the code.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214020530.1714631-1-chi.minghao@zte.com.cn
2022-02-16 10:51:40 +01:00
Dave Airlie
b9c7babe2c Backmerge tag 'v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Daniel asked for this for some intel deps, so let's do it now.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-02-14 10:52:27 +10:00
Dave Airlie
df2bb4dc28 Merge tag 'drm-misc-fixes-2022-02-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
* drm/panel: simple: Fix assignments from panel_dpi_probe()
 * drm/privacy-screen: Cleanups
 * drm/rockchip: Fix HDMI error cleanup; Fix RK3399 VOP register fields
 * drm/vc4: HDMI fixes; Cleanups
 * fbdev: Add fbdev core module with Daniel as maintainer; Cleanups

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YgTf1Zsflzq3JSFo@linux-uq9g
2022-02-11 12:06:15 +10:00
Maarten Lankhorst
542898c5aa Merge remote-tracking branch 'drm/drm-next' into drm-misc-next
First backmerge into drm-misc-next. Required for more helpers backmerged,
and to pull in 5.17 (rc2).

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2022-02-07 17:03:24 +01:00
Maxime Ripard
fc764b103b drm/vc4: crtc: Fix redundant variable assignment
The variable is assigned twice to the same value. Let's drop one.

Reported-by: kernel test robot <yujie.liu@intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203151151.1270461-1-maxime@cerno.tech
2022-02-07 11:15:53 +01:00
Dave Stevenson
1d11896596 drm/vc4: hdmi: Allow DBLCLK modes even if horz timing is odd.
The 2711 pixel valve can't produce odd horizontal timings, and
checks were added to vc4_hdmi_encoder_atomic_check and
vc4_hdmi_encoder_mode_valid to filter out/block selection of
such modes.

Modes with DRM_MODE_FLAG_DBLCLK double all the horizontal timing
values before programming them into the PV. The PV values,
therefore, can not be odd, and so the modes can be supported.

Amend the filtering appropriately.

Fixes: 57fb32e632 ("drm/vc4: hdmi: Block odd horizontal timings")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127135116.298278-1-maxime@cerno.tech
2022-02-03 16:07:59 +01:00
Dave Stevenson
71702c495b drm/vc4: hdmi: Don't try disabling SCDC on Pi0-3.
The code that set the scdc_enabled flag to ensure it was
disabled at boot time also ran on Pi0-3 where there is no
SCDC support. This lead to a warning in vc4_hdmi_encoder_post_crtc_disable
due to vc4_hdmi_disable_scrambling being called and trying to
read (and write) register HDMI_SCRAMBLER_CTL which doesn't
exist on those platforms.

Only set the flag should the interface be configured to support
more than HDMI 1.4.

Fixes: 1998646129 ("drm/vc4: hdmi: Introduce a scdc_enabled flag")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127134559.292778-1-maxime@cerno.tech
2022-02-03 16:07:59 +01:00
Dave Stevenson
3404b39919 drm/vc4: hdmi: Ensure we don't use 2711 HPD registers on Pi0-3
The existing logic was flawed in that it could try reading the
2711 specific registers for HPD on a CM1/3 where the HPD GPIO
hadn't been defined in DT.

Ensure we don't do the 2711 register read on invalid hardware,
and then

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127131754.236074-1-maxime@cerno.tech
2022-02-03 16:07:59 +01:00
Maxime Ripard
3455494614 drm/vc4: hdmi: Simplify the connector state retrieval
When we have the entire DRM state, retrieving the connector state only
requires the drm_connector pointer. Fortunately for us, we have
allocated it as a part of the vc4_hdmi structure, so we can retrieve get
a pointer by simply accessing our field in that structure.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127111404.221882-1-maxime@cerno.tech
2022-02-02 10:44:05 +01:00
Dave Airlie
53dbee4926 Merge tag 'drm-misc-next-2022-01-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
[airlied: add two missing Kconfig]

drm-misc-next for v5.18:

UAPI Changes:
- Fix invalid IN_FORMATS blob when plane->format_mod_supported is NULL.

Cross-subsystem Changes:
- Assorted dt bindings updates.
- Fix vga16fb vga checking on x86.
- Fix extra semicolon in rwsem.h's _down_write_nest_lock.
- Assorted small fixes to agp and fbdev drivers.
- Fix oops in creating a udmabuf with 0 pages.
- Hot-unplug firmware fb devices on forced removal
- Reqquest memory region in simplefb and simpledrm, and don't make the ioresource as busy.

Core Changes:
- Mock a drm_plane in drm-plane-helper selftest.
- Assorted bug fixes to device logging, dbi.
- Use DP helper for sink count in mst.
- Assorted documentation fixes.
- Assorted small fixes.
- Move DP headers to drm/dp, and add a drm dp helper module.
- Move the buddy allocator from i915 to common drm.
- Add simple pci and platform module init macros to remove a lot of boilerplate from some drivers.
- Support microsoft extension for HMDs and specialized monitors.
- Improve edid parser's deep color handling.
- Add type 7 timing support to edid parser.
- Add a weak backpointer to the ttm_bo from ttm_resource
- Add 3 eDP panels.

Driver Changes:
- Add support for HDMI and JZ4780 to ingenic.
- Add support for higher DP/eDP bitrates to nouveau.
- Assorted driver fixes to tilcdc, vmwgfx, sn65dsi83, meson, stm, panfrost, v3d, gma500, vc4, virtio, mgag200, ast, radeon, amdgpu, nouveau, various bridge drivers.
- Convert and revert exynos dsi support to bridge driver.
- Add vcc supply regulator support for sn65dsi83.
- More conversion of bridge/chipone-icn6211 to atomic.
- Remove conflicting fb's from stm, and add support for new hw version.
- Add device link in parade-ps8640 to fix suspend/resume.
- Update Boe-tv110c9m init sequence.
- Add wide screen support to AST2600.
- Fix omapdrm implicit dma_buf fencing.
- Add support for multiple overlay planes to vkms.
- Convert bridge/anx7625 to atomic, add HDCP support,
  add eld support for audio, and fix HPD.
- Add driver for ChromeOS privacy screen.
- Handover display from firmware to vc4 more gracefully, and support nomodeset.
- Add flexible and ycbcr pixel formats to stm/ltdc.
- Convert exynos mipi dsi to atomic.
- Add initial dual core group GPUs support to panfrost.
- No longer add exclusive fence in amdgpu as shared fence.
- Add CSC and full range supoprt to vc4.
- Shutdown the display on system shutdown and unbind.
- Add Multi-Inno Technology MI0700S4T-6 simple panel.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/456a23c6-7324-7543-0c45-751f30ef83f7@linux.intel.com
2022-02-01 19:02:41 +10:00
Maxime Ripard
a34b14a29d drm/vc4: hdmi: Change CSC callback prototype
In order to support the YUV output, we'll need the atomic state to know
what is the state of the associated property in the CSC setup callback.

Let's change the prototype of that callback to allow us to access it.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-11-maxime@cerno.tech
2022-01-25 10:03:25 +01:00
Maxime Ripard
2034fc12dd drm/vc4: hdmi: Define colorspace matrices
The current CSC setup code for the BCM2711 uses a sequence of register
writes to configure the CSC depending on whether we output using a full
or limited range.

However, with the upcoming introduction of the YUV output, we're going
to add new matrices to perform the conversions, so we should switch to
something a bit more flexible that takes the matrix as an argument and
programs the CSC accordingly.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-10-maxime@cerno.tech
2022-01-25 10:03:11 +01:00
Maxime Ripard
b718d8478e drm/vc4: hdmi: Replace CSC_CTL hardcoded value by defines
On BCM2711, the HDMI_CSC_CTL register value has been hardcoded to an
opaque value. Let's replace it with properly defined values.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-9-maxime@cerno.tech
2022-01-25 10:02:45 +01:00
Maxime Ripard
0cbb53b283 drm/vc4: hdmi: Move XBAR setup to csc_setup
On the BCM2711, the HDMI_VEC_INTERFACE_XBAR register configuration
depends on whether we're using an RGB or YUV output. Let's move that
configuration to the CSC setup.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-8-maxime@cerno.tech
2022-01-25 10:02:41 +01:00
Maxime Ripard
dccb4d74e0 drm/vc4: hdmi: Use full range helper in csc functions
The CSC callbacks takes a boolean as an argument to tell whether we're
using the full range or limited range RGB.

However, with the upcoming YUV support, the logic will be a bit more
complex. In order to address this, let's make the callbacks take the
entire mode, and call our new helper to tell whether the full or limited
range RGB should be used.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-7-maxime@cerno.tech
2022-01-25 10:02:36 +01:00
Maxime Ripard
a649cc821a drm/vc4: hdmi: Add full range RGB helper
We're going to need to tell whether we want to run with a full or
limited range RGB output in multiple places in the code, so let's create
a helper that will return whether we need with full range or not.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-6-maxime@cerno.tech
2022-01-25 10:02:31 +01:00
Maxime Ripard
4a46e5d251 drm/edid: Rename drm_hdmi_avi_infoframe_colorspace to _colorimetry
The drm_hdmi_avi_infoframe_colorspace() function actually sets the
colorimetry and extended_colorimetry fields in the hdmi_avi_infoframe
structure with DRM_MODE_COLORIMETRY_* values.

To make things worse, the hdmi_avi_infoframe structure also has a
colorspace field used to signal whether an RGB or YUV output is being
used.

Let's remove the inconsistency and allow for the colorspace usage by
renaming the function.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-2-maxime@cerno.tech
2022-01-25 10:00:13 +01:00
Padmanabha Srinivasaiah
0a3d12ab50 drm/vc4: Fix deadlock on DSI device attach error
DSI device attach to DSI host will be done with host device's lock
held.

Un-registering host in "device attach" error path (ex: probe retry)
will result in deadlock with below call trace and non operational
DSI display.

Startup Call trace:
[   35.043036]  rt_mutex_slowlock.constprop.21+0x184/0x1b8
[   35.043048]  mutex_lock_nested+0x7c/0xc8
[   35.043060]  device_del+0x4c/0x3e8
[   35.043075]  device_unregister+0x20/0x40
[   35.043082]  mipi_dsi_remove_device_fn+0x18/0x28
[   35.043093]  device_for_each_child+0x68/0xb0
[   35.043105]  mipi_dsi_host_unregister+0x40/0x90
[   35.043115]  vc4_dsi_host_attach+0xf0/0x120 [vc4]
[   35.043199]  mipi_dsi_attach+0x30/0x48
[   35.043209]  tc358762_probe+0x128/0x164 [tc358762]
[   35.043225]  mipi_dsi_drv_probe+0x28/0x38
[   35.043234]  really_probe+0xc0/0x318
[   35.043244]  __driver_probe_device+0x80/0xe8
[   35.043254]  driver_probe_device+0xb8/0x118
[   35.043263]  __device_attach_driver+0x98/0xe8
[   35.043273]  bus_for_each_drv+0x84/0xd8
[   35.043281]  __device_attach+0xf0/0x150
[   35.043290]  device_initial_probe+0x1c/0x28
[   35.043300]  bus_probe_device+0xa4/0xb0
[   35.043308]  deferred_probe_work_func+0xa0/0xe0
[   35.043318]  process_one_work+0x254/0x700
[   35.043330]  worker_thread+0x4c/0x448
[   35.043339]  kthread+0x19c/0x1a8
[   35.043348]  ret_from_fork+0x10/0x20

Shutdown Call trace:
[  365.565417] Call trace:
[  365.565423]  __switch_to+0x148/0x200
[  365.565452]  __schedule+0x340/0x9c8
[  365.565467]  schedule+0x48/0x110
[  365.565479]  schedule_timeout+0x3b0/0x448
[  365.565496]  wait_for_completion+0xac/0x138
[  365.565509]  __flush_work+0x218/0x4e0
[  365.565523]  flush_work+0x1c/0x28
[  365.565536]  wait_for_device_probe+0x68/0x158
[  365.565550]  device_shutdown+0x24/0x348
[  365.565561]  kernel_restart_prepare+0x40/0x50
[  365.565578]  kernel_restart+0x20/0x70
[  365.565591]  __do_sys_reboot+0x10c/0x220
[  365.565605]  __arm64_sys_reboot+0x2c/0x38
[  365.565619]  invoke_syscall+0x4c/0x110
[  365.565634]  el0_svc_common.constprop.3+0xfc/0x120
[  365.565648]  do_el0_svc+0x2c/0x90
[  365.565661]  el0_svc+0x4c/0xf0
[  365.565671]  el0t_64_sync_handler+0x90/0xb8
[  365.565682]  el0t_64_sync+0x180/0x184

Signed-off-by: Padmanabha Srinivasaiah <treasure4paddy@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220118005127.29015-1-treasure4paddy@gmail.com
2022-01-19 10:08:48 +01:00
Colin Ian King
7f0fec39c9 drm/vc4: remove redundant assignment of variable size
The variable 'size' is being assigned a value that is never read,
the assignment is redundant and can be removed. Cleans up clang-scan
warning:

drivers/gpu/drm/vc4/vc4_bo.c:358:2: warning: Value stored to 'size'
is never read [deadcode.DeadStores]
        size = roundup(size, PAGE_SIZE);

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220112232036.1182846-1-colin.i.king@gmail.com
2022-01-14 14:14:56 +01:00