As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there.
We do this by recompiling i915/display code twice.
Now that i915 has been adapted to support the Xe build, we can add
the xe/display support.
This initial work is a collaboration of many people and unfortunately
this squashed patch won't fully honor the proper credits.
But let's try to add a few from the squashed patches:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Driver initiated function-reset (FLR) is the highest level of reset
that we can trigger from within the driver. In contrast to PCI FLR it
doesn't require re-enumeration of PCI BAR. It can be useful in case
GT fails to reset. It is also the only way to trigger GSC reset from
the driver and can be used in future addition of GSC support.
v2:
- use regs from xe_regs.h
- move the flag to xe.mmio
- call flr only on root gt
- use BIOS protection check
- copy/paste comments from i915
v3:
- flr code moved to xe_device.c
v4:
- needs_flr_on_fini moved to xe_device
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Although the vast majority of workarounds the driver needs to implement
are either GT-based or display-based, there are occasionally workarounds
that reside outside those parts of the hardware (i.e., in they target
registers in the sgunit/soc); we can consider these to be "tile"
workarounds since there will be instance of these registers per tile.
The registers in question should only lose their values during a
function-level reset, so they only need to be applied during probe and
resume; the registers will not be affected by GT/engine resets.
Tile workarounds are rare (there's only one, 22010954014, that's
relevant to Xe at the moment) so it's probably not worth updating the
xe_rtp design to handle tile-level workarounds yet, although we may want
to consider that in the future if/when more of these show up on future
platforms.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20230913231411.291933-13-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
These should replace the _MMIO() and MCR_REG() from i915, with the goal
of being more extensible, allowing to pass the additional fields for
struct xe_reg and struct xe_reg_mcr. Replace all uses of _MMIO() and
MCR_REG() in xe.
Since the RTP, reg-save-restore and WA infra are not ready to use the
new type, just undef the macro like was done for the i915 types
previously. That conversion will come later.
v2: Remove MEDIA_SOFT_SCRATCH_COUNT/MEDIA_SOFT_SCRATCH re-added by
mistake (Matt Roper)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230427223256.1432787-8-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Convert the macro declarations to the equivalent GENMASK and
and bitfield prep for all registers.
v2 (Matt Roper):
- Fix wrong conversion of RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_MASK
- Reorder fields of XEHP_SLICE_UNIT_LEVEL_CLKGATE for consistency
- Simplify CTC_SOURCE_* by only defining CTC_SOURCE_DIVIDE_LOGIC
as REG_BIT(0)
v3: Also remove DOP_CLOCK_GATE_ENABLE that is unused and wrongly defined
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://lore.kernel.org/r/20230427223256.1432787-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The defines for the registers were brought over from i915 while
bootstrapping the driver. As xe supports TGL and later only, it doesn't
make sense to keep the GEN* prefixes and suffixes in the registers: TGL
is graphics version 12, previously called "GEN12". So drop the prefix
everywhere.
v2:
- Also drop _TGL suffix and reword commit message as suggested
by Matt Roper. While at it, rename VSUNIT_CLKGATE_DIS_TGL to
VSUNIT_CLKGATE2_DIS with the additional "2", so it doesn't clash
with the define for the other register
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230427223256.1432787-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For cases where IRQ_INIT and IRQ_RESET are used, the relevant interrupt
registers are always consecutive and ordered ISR, IMR, IIR, IER. Adding
helpers to look these up from a base offset will let us eliminate some
of the CPP pasting and simplify other upcoming patches.
v2:
- s/_REGS/_OFFSET/ for consistency. (Lucas)
- Move IMR/IIR/IER helpers into xe_irq.c; they aren't needed anywhere
else. (Lucas)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230401002106.588656-3-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reduce the use of i915_reg_defs.h so it can be encapsulated in a single
place.
1) If it was being included by mistake, remove
2) If it was included for FIELD_GET()/FIELD_PREP()/GENMASK() and the
like, just include <linux/bitfield.h>
3) If it was included to be able to define additional registers, move
the registers to the relavant headers (regs/xe_regs.h or
regs/xe_gt_regs.h)
v2:
- Squash commit fixing i915_reg_defs.h include and with the one
introducing regs/xe_reg_defs.h
- Remove more cases of i915_reg_defs.h being used when all it was
needed was linux/bitfield.h (Matt Roper)
- Move some registers to the corresponding regs/*.h file (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo squashed here the removal of the i915 include]
Copy the macros used by xe in i915_reg.h to regs/xe_regs.h. A minimal
cleanup is done while copying so they adhere minimally to the coding
style. Further reordering and cleaning is left for later.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
