It looks that declaration of kunit_get_current_test() was
available in xe_guc_relay.c only with CONFIG_KUNIT enabled.
If CONFIG_KUNIT is disabled we fail with:
In file included from ../include/linux/build_bug.h:5,
from ../include/linux/bitfield.h:10,
from ../drivers/gpu/drm/xe/xe_guc_relay.c:6:
../drivers/gpu/drm/xe/xe_guc_relay.c: In function ‘xe_guc_relay_process_guc2vf’:
../drivers/gpu/drm/xe/xe_guc_relay.c:863:52: error: implicit declaration of function ‘kunit_get_current_test’ [-Werror=implicit-function-declaration]
863 | if (unlikely(!IS_SRIOV_VF(relay_to_xe(relay)) && !kunit_get_current_test()))
| ^~~~~~~~~~~~~~~~~~~~~~
../include/linux/compiler.h:77:42: note: in definition of macro ‘unlikely’
77 | # define unlikely(x) __builtin_expect(!!(x), 0)
| ^
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: 811fe9f556 ("drm/xe/guc: Introduce Relay Communication for SR-IOV")
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Tested-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://lore.kernel.org/r/20240105171947.321-1-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
The helper is generic, it doesn't use the opaque EDID type struct drm_edid
and is also used by drivers that only support non-probeable displays such
as fixed panels.
These drivers add a list of modes using drm_mode_probed_add() and then set
a preferred mode using the drm_set_preferred_mode() helper.
It seems more logical to have the helper definition in drm_modes.o instead
of drm_edid.o, since the former contains modes helper while the latter has
helpers to manage the EDID information.
Since both drm_edid.o and drm_modes.o object files are built-in the drm.o
object, there are no functional changes. But besides being a more logical
place for this helper, it could also allow to eventually make drm_edid.o
optional and not included in drm.o if only fixed panels must be supported
in a given system.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240102122208.3103597-1-javierm@redhat.com
There are scenarios where SR-IOV Virtual Function (VF) driver will
need to get additional data that is not available over VF MMIO BAR
nor could be queried from the GuC firmware and must be obtained
from the Physical Function (PF) driver.
To allow such communication between VF and PF drivers, GuC supports
set of H2G and G2H actions which allows relaying embedded messages,
that are otherwise opaque for the GuC.
To allow use of this communication mechanism, provide functions for
sending requests and handling replies and placeholder where we will
put handlers for incoming requests.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20240104222031.277-8-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Now intel_wakeref_t is a unsigned long and Xe KMD version of those
functions should use the same type, so changing from bool to
intel_wakeref_t.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
i915 defines it as unsigned long so Xe should do the same to avoid
compilation warnings:
CC [M] drivers/gpu/drm/i915/i915_gem.o
CC [M] drivers/gpu/drm/xe/i915-display/intel_display_power_well.o
In file included from ./include/drm/drm_mm.h:51,
from drivers/gpu/drm/xe/xe_bo_types.h:11,
from drivers/gpu/drm/xe/xe_bo.h:11,
from ./drivers/gpu/drm/xe/compat-i915-headers/gem/i915_gem_object.h:11,
from ./drivers/gpu/drm/xe/compat-i915-headers/i915_drv.h:15,
from drivers/gpu/drm/i915/display/intel_display_power.c:8:
drivers/gpu/drm/i915/display/intel_display_power.c: In function ‘print_async_put_domains_state’:
drivers/gpu/drm/i915/display/intel_display_power.c:408:29: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘int’ [-Wformat=]
408 | drm_dbg(&i915->drm, "async_put_wakeref %lu\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~
409 | power_domains->async_put_wakeref);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| int
./include/drm/drm_print.h:410:39: note: in definition of macro ‘drm_dev_dbg’
410 | __drm_dev_dbg(NULL, dev, cat, fmt, ##__VA_ARGS__)
| ^~~
./include/drm/drm_print.h:510:33: note: in expansion of macro ‘drm_dbg_driver’
510 | #define drm_dbg(drm, fmt, ...) drm_dbg_driver(drm, fmt, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~
drivers/gpu/drm/i915/display/intel_display_power.c:408:9: note: in expansion of macro ‘drm_dbg’
408 | drm_dbg(&i915->drm, "async_put_wakeref %lu\n",
| ^~~~~~~
drivers/gpu/drm/i915/display/intel_display_power.c:408:50: note: format string is defined here
408 | drm_dbg(&i915->drm, "async_put_wakeref %lu\n",
| ~~^
| |
| long unsigned int
| %u
CC [M] drivers/gpu/drm/i915/i915_gem_evict.o
CC [M] drivers/gpu/drm/i915/i915_gem_gtt.o
CC [M] drivers/gpu/drm/xe/i915-display/intel_display_trace.o
CC [M] drivers/gpu/drm/xe/i915-display/intel_display_wa.o
CC [M] drivers/gpu/drm/i915/i915_query.o
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Turns out that one of the ways that Nvidia's driver handles the pre-LT
timeout for eDP panels is by providing a retry timeout in their link
training callbacks that we're expected to wait for. Up until now we didn't
pay any attention to this parameter.
So, start honoring the timeout if link training fails - and retry up to 3
times. The "3 times" bit comes from OpenRM's link training code.
[airlied: this fixes the panel on one of my laptops]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-12-airlied@gmail.com
There is a deadlock between the irq and fctx locks,
the irq handling takes irq then fctx lock
the fence signalling takes fctx then irq lock
This splits the fence signalling path so the code that hits
the irq lock is done in a separate work queue.
This seems to fix crashes/hangs when using nouveau gsp with
i915 primary GPU.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-11-airlied@gmail.com
Currently we get an error from ACPI because both of these arguments expect
a single argument, and we don't provide one. I'm not totally clear on what
that argument does, but we're able to find the missing value from
_acpiCacheMethodData() in src/kernel/platform/acpi_common.c in nvidia's
driver. So, let's add that - which doesn't get eDP displays to power on
quite yet, but gets rid of the argument warning at least.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-7-airlied@gmail.com
MST connectors don't have a static attached encoder, as their encoder
can change depending on the pipe they use; so the encoder for an MST
connector can't be retrieved using intel_dp_attached_encoder() (which
may return NULL for MST). Most of the PSR debugfs entries depend on a
static connector -> encoder mapping which is only true for eDP and SST
DP connectors and not for MST. These debugfs entries were enabled for
MST connectors as well recently to provide PR information for them, but
handling MST connectors needs more changes.
Fix this by not adding for now the PSR entries on MST connectors. To
make things more uniform add the entries for SST connectors on all
platforms, not just on platforms supporting DP2.0.
v2:
- Keep adding the entries for SST connectors. (Jouni)
- Add a TODO: comment for MST support.
Fixes: ef75c25e8f ("drm/i915/panelreplay: Debugfs support for panel replay")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9850
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240103152609.2434100-1-imre.deak@intel.com
The check for sending the vsc infopacket to the display was gated behind
PSR (Panel Self Refresh) being enabled.
The vsc infopacket also contains the colorimetry (specifically the
container color gamut) information for the stream on modern DP.
PSR is typically only supported on mobile phone eDP displays, thus this
was not getting sent for typical desktop monitors or TV screens.
This functionality is needed for proper HDR10 functionality on DP as it
wants BT2020 RGB/YCbCr for the container color space.
Cc: stable@vger.kernel.org
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Xaver Hugl <xaver.hugl@gmail.com>
Cc: Melissa Wen <mwen@igalia.com>
Fixes: 15f9dfd545 ("drm/amd/display: Register Colorspace property for DP and HDMI")
Tested-by: Simon Berz <simon@berz.me>
Tested-by: Xaver Hugl <xaver.hugl@kde.org>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
