Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Use acpi_evaluate_dsm_typed() instead of open-coding _DSM
evaluation to learn device characteristics (Andy Shevchenko)
- Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK
definition (Ilpo Järvinen)
- Simplify config access error checking in various drivers (Ilpo
Järvinen)
- Use pcie_capability_clear_word() (not
pcie_capability_clear_and_set_word()) when only clearing (Ilpo
Järvinen)
- Add pci_get_base_class() to simplify finding devices using base
class only (ignoring subclass and programming interface) (Sui
Jingfeng)
- Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA
devices from before the Class Code was added to PCI (Sui Jingfeng)
- Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to
include ancient VGA devices (Sui Jingfeng)
Resource management:
- Make pci_assign_unassigned_resources() non-init because sparc uses
it after init (Randy Dunlap)
Driver binding:
- Retain .remove() and .probe() callbacks (previously __init) because
sysfs may cause them to be called later (Uwe Kleine-König)
- Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so
it can be claimed by dwc3 instead (Vicki Pfau)
PCI device hotplug:
- Add Ampere Altra Attention Indicator extension driver for acpiphp
(D Scott Phillips)
Power management:
- Quirk VideoPropulsion Torrent QN16e with longer delay after reset
(Lukas Wunner)
- Prevent users from overriding drivers that say we shouldn't use
D3cold (Lukas Wunner)
- Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
because wakeup interrupts from those states don't work if amd-pmc
has put the platform in a hardware sleep state (Mario Limonciello)
IOMMU:
- Disable ATS for Intel IPU E2000 devices with invalidation message
endianness erratum (Bartosz Pawlowski)
Error handling:
- Factor out interrupt enable/disable into helpers (Kai-Heng Feng)
Peer-to-peer DMA:
- Fix flexible-array usage in struct pci_p2pdma_pagemap in case we
ever use pagemaps with multiple entries (Gustavo A. R. Silva)
ASPM:
- Revert a change that broke when drivers disabled L1 and users later
enabled an L1.x substate via sysfs, and fix a similar issue when
users disabled L1 via sysfs (Heiner Kallweit)
Endpoint framework:
- Fix double free in __pci_epc_create() (Dan Carpenter)
- Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie)
Cadence PCIe controller driver:
- Drop unused "is_rc" member (Li Chen)
Freescale Layerscape PCIe controller driver:
- Enable 64-bit addressing in endpoint mode (Guanhua Gao)
Intel VMD host bridge driver:
- Fix multi-function header check (Ilpo Järvinen)
Microsoft Hyper-V host bridge driver:
- Annotate struct hv_dr_state with __counted_by (Kees Cook)
NVIDIA Tegra194 PCIe controller driver:
- Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup()
already does this via dw_pcie_link_set_max_link_width() (Yoshihiro
Shimoda)
Qualcomm PCIe controller driver:
- Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed
(Manivannan Sadhasivam)
- Add a .write_dbi2() callback so DBI2 register writes, e.g., for
setting the BAR size, work correctly (Manivannan Sadhasivam)
- Enable ASPM for platforms that use 1.9.0 ops, because the PCI core
doesn't enable ASPM states that haven't been enabled by the
firmware (Manivannan Sadhasivam)
Renesas R-Car Gen4 PCIe controller driver:
- Add DesignWare core support (set max link width, EDMA_UNROLL flag,
.pre_init(), .deinit(), etc) for use by R-Car Gen4 driver
(Yoshihiro Shimoda)
- Add driver and DT schema for DesignWare-based Renesas R-Car Gen4
controller in both host and endpoint mode (Yoshihiro Shimoda)
Xilinx NWL PCIe controller driver:
- Update ECAM size to support 256 buses (Thippeswamy Havalige)
- Stop setting bridge primary/secondary/subordinate bus numbers,
since PCI core does this (Thippeswamy Havalige)
Xilinx XDMA controller driver:
- Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with
Xilinx XDMA Soft IP (Thippeswamy Havalige)
Miscellaneous:
- Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT
macros (Ilpo Järvinen, Bjorn Helgaas)
- Remove logic_outb(), _outw(), outl() duplicate declarations (John
Sanpe)
- Replace unnecessary UTF-8 in Kconfig help text because menuconfig
doesn't render it correctly (Liu Song)"
* tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits)
PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
PCI: endpoint: Fix double free in __pci_epc_create()
PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
PCI: xilinx-cpm: Move IRQ definitions to a common header
PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
PCI: hotplug: Add Ampere Altra Attention Indicator extension driver
PCI/AER: Factor out interrupt toggling into helpers
PCI: acpiphp: Allow built-in drivers for Attention Indicators
PCI/portdrv: Use FIELD_GET()
PCI/VC: Use FIELD_GET()
PCI/PTM: Use FIELD_GET()
PCI/PME: Use FIELD_GET()
PCI/ATS: Use FIELD_GET()
PCI/ATS: Show PASID Capability register width in bitmasks
PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
...
We are preparing for Xe driver. Xe driver doesn't have i915_sw_fence
implementation. Lets drop i915_sw_fence usage from display code and
use dma_fence interfaces directly.
For this purpose stack dma fences from related objects into new plane
state. Drm_gem_plane_helper_prepare_fb can be used for fences in new
fb. Separate local implementation is used for Stacking fences from old fb
into new plane state. Then wait for these stacked fences during atomic
commit. There is no be need for separate GPU reset handling in
intel_atomic_commit_fence_wait as the fences are signaled when GPU hang is
detected and GPU is being reset.
v4:
- Drop to_new_plane_state suffix from add_dma_resv_fences
- Use dma_resv_usage_rw(false) (DMA_RESV_USAGE_WRITE)
v3:
- Rename add_fences and it's parameters
- Remove signaled check
- Remove waiting old_plane_state fences
v2:
- Add fences from old fb into new_plane_state->uapi.fence rather than
into old_plane_state->uapi.fence
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231031084557.1181630-1-jouni.hogander@intel.com
Pull sysctl updates from Luis Chamberlain:
"To help make the move of sysctls out of kernel/sysctl.c not incur a
size penalty sysctl has been changed to allow us to not require the
sentinel, the final empty element on the sysctl array. Joel Granados
has been doing all this work. On the v6.6 kernel we got the major
infrastructure changes required to support this. For v6.7-rc1 we have
all arch/ and drivers/ modified to remove the sentinel. Both arch and
driver changes have been on linux-next for a bit less than a month. It
is worth re-iterating the value:
- this helps reduce the overall build time size of the kernel and run
time memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move
sysctls out from kernel/sysctl.c to their own files
For v6.8-rc1 expect removal of all the sentinels and also then the
unneeded check for procname == NULL.
The last two patches are fixes recently merged by Krister Johansen
which allow us again to use softlockup_panic early on boot. This used
to work but the alias work broke it. This is useful for folks who want
to detect softlockups super early rather than wait and spend money on
cloud solutions with nothing but an eventual hung kernel. Although
this hadn't gone through linux-next it's also a stable fix, so we
might as well roll through the fixes now"
* tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (23 commits)
watchdog: move softlockup_panic back to early_param
proc: sysctl: prevent aliased sysctls from getting passed to init
intel drm: Remove now superfluous sentinel element from ctl_table array
Drivers: hv: Remove now superfluous sentinel element from ctl_table array
raid: Remove now superfluous sentinel element from ctl_table array
fw loader: Remove the now superfluous sentinel element from ctl_table array
sgi-xp: Remove the now superfluous sentinel element from ctl_table array
vrf: Remove the now superfluous sentinel element from ctl_table array
char-misc: Remove the now superfluous sentinel element from ctl_table array
infiniband: Remove the now superfluous sentinel element from ctl_table array
macintosh: Remove the now superfluous sentinel element from ctl_table array
parport: Remove the now superfluous sentinel element from ctl_table array
scsi: Remove now superfluous sentinel element from ctl_table array
tty: Remove now superfluous sentinel element from ctl_table array
xen: Remove now superfluous sentinel element from ctl_table array
hpet: Remove now superfluous sentinel element from ctl_table array
c-sky: Remove now superfluous sentinel element from ctl_talbe array
powerpc: Remove now superfluous sentinel element from ctl_table arrays
riscv: Remove now superfluous sentinel element from ctl_table array
x86/vdso: Remove now superfluous sentinel element from ctl_table array
...
Pull ia64 removal and asm-generic updates from Arnd Bergmann:
- The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will be
maintained as an LTS kernel.
- The architecture specific system call tables are updated for the
added map_shadow_stack() syscall and to remove references to the
long-gone sys_lookup_dcookie() syscall.
* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
hexagon: Remove unusable symbols from the ptrace.h uapi
asm-generic: Fix spelling of architecture
arch: Reserve map_shadow_stack() syscall number for all architectures
syscalls: Cleanup references to sys_lookup_dcookie()
Documentation: Drop or replace remaining mentions of IA64
lib/raid6: Drop IA64 support
Documentation: Drop IA64 from feature descriptions
kernel: Drop IA64 support from sig_fault handlers
arch: Remove Itanium (IA-64) architecture
Pull VFIO updates from Alex Williamson:
- Add support for "chunk mode" in the mlx5-vfio-pci variant driver,
which allows both larger device image sizes for migration, beyond the
previous 4GB limit, and also read-ahead support for improved
migration performance (Yishai Hadas)
- A new bus master control interface for the CDX bus driver where there
is no in-band mechanism to toggle device DMA as there is through
config space on PCI devices (Nipun Gupta)
- Add explicit alignment directives to vfio data structures to reduce
the chance of breaking 32-bit userspace. In most cases this is
transparent and the remaining cases where data structures are padded
work within the existing rules for extending data structures within
vfio (Stefan Hajnoczi)
- Resolve a bug in the cdx bus driver noted when compiled with clang
where missing parenthesis result in the wrong operation (Nathan
Chancellor)
- Resolve errors reported by smatch for a function when dealing with
invalid inputs (Alex Williamson)
- Add migration support to the mtty vfio/mdev sample driver for testing
and integration purposes, allowing CI of migration without specific
hardware requirements. Also resolve many of the short- comings of
this driver relative to implementation of the vfio interrupt ioctl
along the way (Alex Williamson)
* tag 'vfio-v6.7-rc1' of https://github.com/awilliam/linux-vfio:
vfio/mtty: Enable migration support
vfio/mtty: Overhaul mtty interrupt handling
vfio: Fix smatch errors in vfio_combine_iova_ranges()
vfio/cdx: Add parentheses between bitwise AND expression and logical NOT
vfio/mlx5: Activate the chunk mode functionality
vfio/mlx5: Add support for READING in chunk mode
vfio/mlx5: Add support for SAVING in chunk mode
vfio/mlx5: Pre-allocate chunks for the STOP_COPY phase
vfio/mlx5: Rename some stuff to match chunk mode
vfio/mlx5: Enable querying state size which is > 4GB
vfio/mlx5: Refactor the SAVE callback to activate a work only upon an error
vfio/mlx5: Wake up the reader post of disabling the SAVING migration file
vfio: use __aligned_u64 in struct vfio_device_ioeventfd
vfio: use __aligned_u64 in struct vfio_device_gfx_plane_info
vfio: trivially use __aligned_u64 for ioctl structs
vfio-cdx: add bus mastering device feature support
vfio: add bus master feature to device feature ioctl
cdx: add support for bus mastering
This workaround is primarily implemented by the BIOS. However if the
BIOS applies the workaround it will reserve a small piece of our DSM
(which should be at the top, right below the WOPCM); we just need to
keep that region reserved so that nothing else attempts to re-use it.
v2: Declare regs in intel_gt_regs.h (Matt Roper)
v3: Shift WA implementation before calculation of *base (Matt Roper)
v4:
- Change condition gscpmi base to be fall in DSM range.(Matt Roper)
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027195052.3676632-1-dnyaneshwar.bhadane@intel.com
Rather than call free_job and run_job in same work item have a dedicated
work item for each. This aligns with the design and intended use of work
queues.
v2:
- Test for DMA_FENCE_FLAG_TIMESTAMP_BIT before setting
timestamp in free_job() work item (Danilo)
v3:
- Drop forward dec of drm_sched_select_entity (Boris)
- Return in drm_sched_run_job_work if entity NULL (Boris)
v4:
- Replace dequeue with peek and invert logic (Luben)
- Wrap to 100 lines (Luben)
- Update comments for *_queue / *_queue_if_ready functions (Luben)
v5:
- Drop peek argument, blindly reinit idle (Luben)
- s/drm_sched_free_job_queue_if_ready/drm_sched_free_job_queue_if_done (Luben)
- Update work_run_job & work_free_job kernel doc (Luben)
v6:
- Do not move drm_sched_select_entity in file (Luben)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20231031032439.1558703-4-matthew.brost@intel.com
Reviewed-by: Luben Tuikov <ltuikov89@gmail.com>
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
In Xe, the new Intel GPU driver, a choice has made to have a 1 to 1
mapping between a drm_gpu_scheduler and drm_sched_entity. At first this
seems a bit odd but let us explain the reasoning below.
1. In Xe the submission order from multiple drm_sched_entity is not
guaranteed to be the same completion even if targeting the same hardware
engine. This is because in Xe we have a firmware scheduler, the GuC,
which allowed to reorder, timeslice, and preempt submissions. If a using
shared drm_gpu_scheduler across multiple drm_sched_entity, the TDR falls
apart as the TDR expects submission order == completion order. Using a
dedicated drm_gpu_scheduler per drm_sched_entity solve this problem.
2. In Xe submissions are done via programming a ring buffer (circular
buffer), a drm_gpu_scheduler provides a limit on number of jobs, if the
limit of number jobs is set to RING_SIZE / MAX_SIZE_PER_JOB we get flow
control on the ring for free.
A problem with this design is currently a drm_gpu_scheduler uses a
kthread for submission / job cleanup. This doesn't scale if a large
number of drm_gpu_scheduler are used. To work around the scaling issue,
use a worker rather than kthread for submission / job cleanup.
v2:
- (Rob Clark) Fix msm build
- Pass in run work queue
v3:
- (Boris) don't have loop in worker
v4:
- (Tvrtko) break out submit ready, stop, start helpers into own patch
v5:
- (Boris) default to ordered work queue
v6:
- (Luben / checkpatch) fix alignment in msm_ringbuffer.c
- (Luben) s/drm_sched_submit_queue/drm_sched_wqueue_enqueue
- (Luben) Update comment for drm_sched_wqueue_enqueue
- (Luben) Positive check for submit_wq in drm_sched_init
- (Luben) s/alloc_submit_wq/own_submit_wq
v7:
- (Luben) s/drm_sched_wqueue_enqueue/drm_sched_run_job_queue
v8:
- (Luben) Adjust var names / comments
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://lore.kernel.org/r/20231031032439.1558703-3-matthew.brost@intel.com
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
Pull drm updates from Dave Airlie:
"Highlights:
- AMD adds some more upcoming HW platforms
- Intel made Meteorlake stable and started adding Lunarlake
- nouveau has a bunch of display rework in prepartion for the NVIDIA
GSP firmware support
- msm adds a7xx support
- habanalabs has finished migration to accel subsystem
Detail summary:
kernel:
- add initial vmemdup-user-array
core:
- fix platform remove() to return void
- drm_file owner updated to reflect owner
- move size calcs to drm buddy allocator
- let GPUVM build as a module
- allow variable number of run-queues in scheduler
edid:
- handle bad h/v sync_end in EDIDs
panfrost:
- add Boris as maintainer
fbdev:
- use fb_ops helpers more
- only allow logo use from fbcon
- rename fb_pgproto to pgprot_framebuffer
- add HPD state to drm_connector_oob_hotplug_event
- convert to fbdev i/o mem helpers
i915:
- Enable meteorlake by default
- Early Xe2 LPD/Lunarlake display enablement
- Rework subplatforms into IP version checks
- GuC based TLB invalidation for Meteorlake
- Display rework for future Xe driver integration
- LNL FBC features
- LNL display feature capability reads
- update recommended fw versions for DG2+
- drop fastboot module parameter
- added deviceid for Arrowlake-S
- drop preproduction workarounds
- don't disable preemption for resets
- cleanup inlines in headers
- PXP firmware loading fix
- Fix sg list lengths
- DSC PPS state readout/verification
- Add more RPL P/U PCI IDs
- Add new DG2-G12 stepping
- DP enhanced framing support to state checker
- Improve shared link bandwidth management
- stop using GEM macros in display code
- refactor related code into display code
- locally enable W=1 warnings
- remove PSR watchdog timers on LNL
amdgpu:
- RAS/FRU EEPROM updatse
- IP discovery updatses
- GC 11.5 support
- DCN 3.5 support
- VPE 6.1 support
- NBIO 7.11 support
- DML2 support
- lots of IP updates
- use flexible arrays for bo list handling
- W=1 fixes
- Enable seamless boot in more cases
- Enable context type property for HDMI
- Rework GPUVM TLB flushing
- VCN IB start/size alignment fixes
amdkfd:
- GC 10/11 fixes
- GC 11.5 support
- use partial migration in GPU faults
radeon:
- W=1 Fixes
- fix some possible buffer overflow/NULL derefs
nouveau:
- update uapi for NO_PREFETCH
- scheduler/fence fixes
- rework suspend/resume for GSP-RM
- rework display in preparation for GSP-RM
habanalabs:
- uapi: expose tsc clock
- uapi: block access to eventfd through control device
- uapi: force dma-buf export to PAGE_SIZE alignments
- complete move to accel subsystem
- move firmware interface include files
- perform hard reset on PCIe AXI drain event
- optimise user interrupt handling
msm:
- DP: use existing helpers for DPCD
- DPU: interrupts reworked
- gpu: a7xx (a730/a740) support
- decouple msm_drv from kms for headless devices
mediatek:
- MT8188 dsi/dp/edp support
- DDP GAMMA - 12 bit LUT support
- connector dynamic selection capability
rockchip:
- rv1126 mipi-dsi/vop support
- add planar formats
ast:
- rename constants
panels:
- Mitsubishi AA084XE01
- JDI LPM102A188A
- LTK050H3148W-CTA6
ivpu:
- power management fixes
qaic:
- add detach slice bo api
komeda:
- add NV12 writeback
tegra:
- support NVSYNC/NHSYNC
- host1x suspend fixes
ili9882t:
- separate into own driver"
* tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm: (1803 commits)
drm/amdgpu: Remove unused variables from amdgpu_show_fdinfo
drm/amdgpu: Remove duplicate fdinfo fields
drm/amd/amdgpu: avoid to disable gfxhub interrupt when driver is unloaded
drm/amdgpu: Add EXT_COHERENT support for APU and NUMA systems
drm/amdgpu: Retrieve CE count from ce_count_lo_chip in EccInfo table
drm/amdgpu: Identify data parity error corrected in replay mode
drm/amdgpu: Fix typo in IP discovery parsing
drm/amd/display: fix S/G display enablement
drm/amdxcp: fix amdxcp unloads incompletely
drm/amd/amdgpu: fix the GPU power print error in pm info
drm/amdgpu: Use pcie domain of xcc acpi objects
drm/amd: check num of link levels when update pcie param
drm/amdgpu: Add a read to GFX v9.4.3 ring test
drm/amd/pm: call smu_cmn_get_smc_version in is_mode1_reset_supported.
drm/amdgpu: get RAS poison status from DF v4_6_2
drm/amdgpu: Use discovery table's subrevision
drm/amd/display: 3.2.256
drm/amd/display: add interface to query SubVP status
drm/amd/display: Read before writing Backlight Mode Set Register
drm/amd/display: Disable SYMCLK32_SE RCO on DCN314
...
When a fence signals there is a very small race window where the timestamp
isn't updated yet. sync_file solves this by busy waiting for the
timestamp to appear, but on other ocassions didn't handled this
correctly.
Provide a dma_fence_timestamp() helper function for this and use it in
all appropriate cases.
Another alternative would be to grab the spinlock when that happens.
v2 by teddy: add a wait parameter to wait for the timestamp to show up, in case
the accurate timestamp is needed and/or the timestamp is not based on
ktime (e.g. hw timestamp)
v3 chk: drop the parameter again for unified handling
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 1774baa64f ("drm/scheduler: Change scheduled fence track v2")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20230929104725.2358-1-christian.koenig@amd.com
If the size returned by drm buddy allocator is higher than
the required size, we take the higher size to calculate
the buffer start address. This is required if we couldn't
trim the buffer to the requested size. This will fix the
display corruption issue on APU's which has limited VRAM
size.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2859
Fixes: 0a1844bf0b ("drm/buddy: Improve contiguous memory allocation")
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
If driver does not set unmap latency for KIQ, the default value of KIQ
unmap latency is zero. When do unmap queue, KIQ will return that almost
immediately after receiving unmap command. So, the queue status will be
saved to MQD incorrectly or lost in some chance.
[how]
Set unmap latency when do kiq set resources. The unmap latency is set to
be 1 second that is synchronized with Windows driver.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix the high voltage and temperature issue after the driver is unloaded on smu 13.0.0,
smu 13.0.7 and smu 13.0.10
v2 - fix the code format and make sure it is used on the unload case only.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes warnings:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0_6_ppt.c:286:45:
warning: '%s' directive output may be truncated writing up to 29 bytes
into a region of size 23 [-Wformat-truncation=]
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0_6_ppt.c:286:52:
warning: '%s' directive output may be truncated writing up to 29 bytes
into a region of size 23 [-Wformat-truncation=]
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c:72:45: warning:
'%s' directive output may be truncated writing up to 29 bytes into a
region of size 23 [-Wformat-truncation=]
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c:72:52: warning:
'%s' directive output may be truncated writing up to 29 bytes into a
region of size 23 [-Wformat-truncation=]
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The extra DPLL power domain is currently handled in three places:
- combo_pll_enable()
- combo_pll_disable()
- readout_dpll_hw_state()
First two of those are low level PLL funcs, but the third is a higher
level thing. So the current situation is rather inconsistent. Unify
this by moving the PLL enable/disable up one level. This also means
the extra power domain could be trivially be used by other platforms
as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012123522.26045-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Just include the JSL/EHL DPLL4 extra power domain in the dpll_info
struct. This way the same approach could be used by other platforms
as well (should the need arise), and we don't have to sprinkle
platform checks all over the place.
Note that I'm perhaps slightly abusing things here as
power_domain==0 (which is actually POWER_DOMAIN_DISPLAY_CORE) now
indicates that no extra power domain is needed. I suppose using
POWER_DOMAIN_INVALID would be more correct, but then we'd have to
sprinkle that to all the other DPLLs.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012123522.26045-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
