Copy union directly instead of using memcpy().
Note that in this case, a direct assignment is more readable and
consistent with the subsequent assignments.
This addresses the following -Wstringop-overflow warning seen in s390
with defconfig:
drivers/infiniband/hw/mlx4/main.c:296:33: warning: writing 16 bytes into a region of size 0 [-Wstringop-overflow=]
296 | memcpy(&port_gid_table->gids[free].gid,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
297 | &attr->gid, sizeof(attr->gid));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This helps with the ongoing efforts to globally enable
-Wstringop-overflow.
Link: https://github.com/KSPP/linux/issues/308
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZNvimeRAPkJ24zRG@work
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The driver has code blocks for kernel push WQEs but does not
map the doorbell page rendering this mode non functional [1]
Remove code associated with this feature from the kernel fast
path as there is currently no plan of record to support this.
This also address a sparse issue reported by lkp.
drivers/infiniband/hw/irdma/uk.c:285:24: sparse: sparse: incorrect type in assignment (different base types) @@ expected bool [usertype] push_wqe:1 @@ got restricted __le32 [usertype] *push_db @@
drivers/infiniband/hw/irdma/uk.c:285:24: sparse: expected bool [usertype] push_wqe:1
drivers/infiniband/hw/irdma/uk.c:285:24: sparse: got restricted __le32 [usertype] *push_db
drivers/infiniband/hw/irdma/uk.c:386:24: sparse: sparse: incorrect type in assignment (different base types) @@ expected bool [usertype] push_wqe:1 @@ got restricted __le32 [usertype] *push_db @@
[1] https://lore.kernel.org/linux-rdma/20230815051809.GB22185@unreal/T/#t
Fixes: 272bba19d6 ("RDMA: Remove unnecessary ternary operators")
Fixes: 551c46edc7 ("RDMA/irdma: Add user/kernel shared libraries")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308110251.BV6BcwUR-lkp@intel.com/
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230816001209.1721-1-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This commit enables the dynamic allocation of EQs at runtime, allowing
for more flexibility in managing completion EQs and reducing the memory
overhead of driver load. Whenever a CQ is created for a given vector
index, the driver will lookup to see if there is an already mapped
completion EQ for that vector, if so, utilize it. Otherwise, allocate a
new EQ on demand and then utilize it for the CQ completion events.
Add a protection lock to the EQ table to protect from concurrent EQ
creation attempts.
While at it, replace mlx5_vector2irqn()/mlx5_vector2eqn() with
mlx5_comp_eqn_get() and mlx5_comp_irqn_get() which will allocate an
EQ on demand if no EQ is found for the given vector.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
To accurately represent its purpose, rename the function that retrieves
the value of maximum vectors from mlx5_comp_vectors_count() to
mlx5_comp_vectors_max().
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
smatch reports the warning below:
drivers/infiniband/core/uverbs_std_types_counters.c:110
ib_uverbs_handler_UVERBS_METHOD_COUNTERS_READ() error: 'uattr'
dereferencing possible ERR_PTR()
The return value of uattr maybe ERR_PTR(-ENOENT), fix this by checking
the value of uattr before using it.
Fixes: ebb6796bd3 ("IB/uverbs: Add read counters support")
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Link: https://lore.kernel.org/r/20230804022525.1916766-1-xiangyang3@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently, direct wqe is not supported for wr-list. RoCE driver excludes
direct wqe for wr-list by judging whether the number of wr is 1.
For a wr-list where the second wr is a length-error atomic wr, the
post-send driver handles the first wr and adds 1 to the wr number counter
firstly. While handling the second wr, the driver finds out a length error
and terminates the wr handle process, remaining the counter at 1. This
causes the driver mistakenly judges there is only 1 wr and thus enters
the direct wqe process, carrying the current length-error atomic wqe.
This patch fixes the error by adding a judgement whether the current wr
is a bad wr. If so, use the normal doorbell process but not direct wqe
despite the wr number is 1.
Fixes: 01584a5edc ("RDMA/hns: Add support of direct wqe")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20230804012711.808069-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
One-element and zero-length arrays are deprecated. So, replace
one-element array in struct irdma_qvlist_info with flexible-array
member.
A patch for this was sent a while ago[1]. However, it seems that, at
the time, the changes were partially folded[2][3], and the actual
flexible-array transformation was omitted. This patch fixes that.
The only binary difference seen before/after changes is shown below:
| drivers/infiniband/hw/irdma/hw.o
| @@ -868,7 +868,7 @@
| drivers/infiniband/hw/irdma/hw.c:484 (discriminator 2)
| size += struct_size(iw_qvlist, qv_info, rf->msix_count);
| 55b: imul $0x45c,%rdi,%rdi
|- 562: add $0x10,%rdi
|+ 562: add $0x4,%rdi
which is, of course, expected as it reflects the mistake made
while folding the patch I've mentioned above.
Worth mentioning is the fact that with this change we save 12 bytes
of memory, as can be inferred from the diff snapshot above. Notice
that:
$ pahole -C rdma_qv_info idrivers/infiniband/hw/irdma/hw.o
struct irdma_qv_info {
u32 v_idx; /* 0 4 */
u16 ceq_idx; /* 4 2 */
u16 aeq_idx; /* 6 2 */
u8 itr_idx; /* 8 1 */
/* size: 12, cachelines: 1, members: 4 */
/* padding: 3 */
/* last cacheline: 12 bytes */
};
Link: https://lore.kernel.org/linux-hardening/20210525230038.GA175516@embeddedor/ [1]
Link: https://lore.kernel.org/linux-hardening/bf46b428deef4e9e89b0ea1704b1f0e5@intel.com/ [2]
Link: https://lore.kernel.org/linux-rdma/20210520143809.819-1-shiraz.saleem@intel.com/T/#u [3]
Fixes: 44d9e52977 ("RDMA/irdma: Implement device initialization definitions")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZMpsQrZadBaJGkt4@work
Signed-off-by: Leon Romanovsky <leon@kernel.org>
If a send packet is dropped by the IP layer in rxe_requester()
the call to rxe_xmit_packet() can fail with err == -EAGAIN.
To recover, the state of the wqe is restored to the state before
the packet was sent so it can be resent. However, the routines
that save and restore the state miss a significnt part of the
variable state in the wqe, the dma struct which is used to process
through the sge table. And, the state is not saved before the packet
is built which modifies the dma struct.
Under heavy stress testing with many QPs on a fast node sending
large messages to a slow node dropped packets are observed and
the resent packets are corrupted because the dma struct was not
restored. This patch fixes this behavior and allows the test cases
to succeed.
Fixes: 3050b99850 ("IB/rxe: Fix race condition between requester and completer")
Link: https://lore.kernel.org/r/20230721200748.4604-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch corrects an error in rxe_modify_srq where if the
caller changes the srq size the actual new value is not returned
to the caller since it may be larger than what is requested.
Additionally it open codes the subroutine rcv_wqe_size() which
adds very little value, and makes some whitespace changes.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20230620140142.9452-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch:
- Moves code to initialize a qp send work queue to a
subroutine named rxe_init_sq.
- Moves code to initialize a qp recv work queue to a
subroutine named rxe_init_rq.
- Moves initialization of qp request and response packet
queues ahead of work queue initialization so that cleanup
of a qp if it is not fully completed can successfully
attempt to drain the packet queues without a seg fault.
- Makes minor whitespace cleanups.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20230620135519.9365-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixing the ODP registration flow to set the iova correctly.
The calculation in ib_umem_num_dma_blocks() function assumes the iova of
the umem is set correctly.
When iova is not set, the calculation in ib_umem_num_dma_blocks() is
equivalent to length/page_size, which is true only when memory is aligned.
For unaligned memory, iova must be set for the ALIGN() in the
ib_umem_num_dma_blocks() to take effect and return a correct value.
mlx5_ib uses ib_umem_num_dma_blocks() to decide the mkey size to use for
the MR. Without this fix, when registering unaligned ODP MR, a wrong
size mkey might be chosen and this might cause the UMR to fail.
UMR would fail over insufficient size to update the mkey translation:
infiniband mlx5_0: dump_cqe:273:(pid 0): dump error cqe
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 0f 00 78 06 25 00 00 58 00 da ac d2
infiniband mlx5_0: mlx5_ib_post_send_wait:806:(pid 20311): reg umr
failed (6)
infiniband mlx5_0: pagefault_real_mr:661:(pid 20311): Failed to update
mkey page tables
Fixes: f0093fb1a7 ("RDMA/mlx5: Move mlx5_ib_cont_pages() to the creation of the mlx5_ib_mr")
Fixes: a665aca89a ("RDMA/umem: Split ib_umem_num_pages() into ib_umem_num_dma_blocks()")
Signed-off-by: Artemy Kovalyov <artemyko@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/3d4be7ca2155bf239dd8c00a2d25974a92c26ab8.1689757344.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently the attribute cap.max_send_wr and cap.max_recv_wr
sent from user-space during create QP are the provider computed
SQ/RQ depth as opposed to raw values passed from application.
This inhibits computation of an accurate value for max_send_wr
and max_recv_wr for this QP in the kernel which matches the value
returned in user create QP. Also these capabilities needs to be
reported from the driver in query QP.
Add support by extending the ABI to allow the raw cap.max_send_wr and
cap.max_recv_wr to be passed from user-space, while keeping compatibility
for the older scheme.
The internal HW depth and shift needed for the WQs needs to be computed
now for both kernel and user-mode QPs. Add new helpers to assist with this:
irdma_uk_calc_depth_shift_sq, irdma_uk_calc_depth_shift_rq and
irdma_uk_calc_depth_shift_wq.
Consolidate all the user mode QP setup into a new function
irdma_setup_umode_qp which keeps it with its counterpart
irdma_setup_kmode_qp.
Signed-off-by: Youvaraj Sagar <youvaraj.sagar@intel.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230725155525.1081-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Previously, there was no way to query the number of lanes for a network
card, so the same netdev_speed would result in a fixed pair of width and
speed. As network card specifications become more diverse, such fixed
mode is no longer suitable, so a method is needed to obtain the correct
width and speed based on the number of lanes.
This patch retrieves netdev lanes and speed from net_device and
translates them to IB width and speed.
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20230721092052.2090449-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add a CQ table based loookup to allow quick search
for CQ pointer having CQ ID in case of CQ related
asynchrononous event. The table is implemented in a
similar fashion to QP table.
Also add a reference counters for CQ. This is to prevent
destroying CQ while an asynchronous event is being processed.
The memory resource table size is sized higher with this update,
and this table doesn't need to be physically contiguous, so use
a vzalloc vs kzalloc to allocate the table.
Signed-off-by: Krzysztof Czurylo <krzysztof.czurylo@intel.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230725155505.1069-4-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
