STE attributes(NSCFG, PRIVCFG, INSTCFG) use value 0 for "Use Icomming",
for some reason SHCFG doesn't follow that, and it is defined as "0b01".
Currently the driver sets SHCFG to Use Incoming for stage-2 and bypass
domains.
However according to the User Manual (ARM IHI 0070 F.b):
When SMMU_IDR1.ATTR_TYPES_OVR == 0, this field is RES0 and the
incoming Shareability attribute is used.
This patch adds a condition for writing SHCFG to Use incoming to be
compliant with the architecture, and defines ATTR_TYPE_OVR as a new
feature discovered from IDR1.
This also required to propagate the SMMU through some functions args.
There is no need to add similar condition for the newly introduced function
arm_smmu_get_ste_used() as the values of the STE are the same before and
after any transition, so this will not trigger any change. (we already
do the same for the VMID).
Although this is a misconfiguration from the driver, this has been there
for a long time, so probably no HW running Linux is affected by it.
Reported-by: Will Deacon <will@kernel.org>
Closes: https://lore.kernel.org/all/20240215134952.GA690@willie-the-truck/
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240323134658.464743-1-smostafa@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Pull iommu updates from Joerg Roedel:
"Core changes:
- Constification of bus_type pointer
- Preparations for user-space page-fault delivery
- Use a named kmem_cache for IOVA magazines
Intel VT-d changes from Lu Baolu:
- Add RBTree to track iommu probed devices
- Add Intel IOMMU debugfs document
- Cleanup and refactoring
ARM-SMMU Updates from Will Deacon:
- Device-tree binding updates for a bunch of Qualcomm SoCs
- SMMUv2: Support for Qualcomm X1E80100 MDSS
- SMMUv3: Significant rework of the driver's STE manipulation and
domain handling code. This is the initial part of a larger scale
rework aiming to improve the driver's implementation of the
IOMMU-API in preparation for hooking up IOMMUFD support.
AMD-Vi Updates:
- Refactor GCR3 table support for SVA
- Cleanups
Some smaller cleanups and fixes"
* tag 'iommu-updates-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu: Fix compilation without CONFIG_IOMMU_INTEL
iommu/amd: Fix sleeping in atomic context
iommu/dma: Document min_align_mask assumption
iommu/vt-d: Remove scalabe mode in domain_context_clear_one()
iommu/vt-d: Remove scalable mode context entry setup from attach_dev
iommu/vt-d: Setup scalable mode context entry in probe path
iommu/vt-d: Fix NULL domain on device release
iommu: Add static iommu_ops->release_domain
iommu/vt-d: Improve ITE fault handling if target device isn't present
iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected
PCI: Make pci_dev_is_disconnected() helper public for other drivers
iommu/vt-d: Use device rbtree in iopf reporting path
iommu/vt-d: Use rbtree to track iommu probed devices
iommu/vt-d: Merge intel_svm_bind_mm() into its caller
iommu/vt-d: Remove initialization for dynamically heap-allocated rcu_head
iommu/vt-d: Remove treatment for revoking PASIDs with pending page faults
iommu/vt-d: Add the document for Intel IOMMU debugfs
iommu/vt-d: Use kcalloc() instead of kzalloc()
iommu/vt-d: Remove INTEL_IOMMU_BROKEN_GFX_WA
iommu: re-use local fwnode variable in iommu_ops_from_fwnode()
...
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI interrupt subsystem and initial RISC-V MSI
support.
The core changes have been adopted from previous work which converted
ARM[64] to the new per device MSI domain model, which was merged to
support multiple MSI domain per device. The ARM[64] changes are being
worked on too, but have not been ready yet. The core and platform-MSI
changes have been split out to not hold up RISC-V and to avoid that
RISC-V builds on the scheduled for removal interfaces.
The core support provides new interfaces to handle wire to MSI bridges
in a straight forward way and introduces new platform-MSI interfaces
which are built on top of the per device MSI domain model.
Once ARM[64] is converted over the old platform-MSI interfaces and the
related ugliness in the MSI core code will be removed.
The actual MSI parts for RISC-V were finalized late and have been
post-poned for the next merge window.
Drivers:
- Add a new driver for the Andes hart-level interrupt controller
- Rework the SiFive PLIC driver to prepare for MSI suport
- Expand the RISC-V INTC driver to support the new RISC-V AIA
controller which provides the basis for MSI on RISC-V
- A few fixup for the fallout of the core changes"
* tag 'irq-msi-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
irqchip/riscv-intc: Fix low-level interrupt handler setup for AIA
x86/apic/msi: Use DOMAIN_BUS_GENERIC_MSI for HPET/IO-APIC domain search
genirq/matrix: Dynamic bitmap allocation
irqchip/riscv-intc: Add support for RISC-V AIA
irqchip/sifive-plic: Improve locking safety by using irqsave/irqrestore
irqchip/sifive-plic: Parse number of interrupts and contexts early in plic_probe()
irqchip/sifive-plic: Cleanup PLIC contexts upon irqdomain creation failure
irqchip/sifive-plic: Use riscv_get_intc_hwnode() to get parent fwnode
irqchip/sifive-plic: Use devm_xyz() for managed allocation
irqchip/sifive-plic: Use dev_xyz() in-place of pr_xyz()
irqchip/sifive-plic: Convert PLIC driver into a platform driver
irqchip/riscv-intc: Introduce Andes hart-level interrupt controller
irqchip/riscv-intc: Allow large non-standard interrupt number
genirq/irqdomain: Don't call ops->select for DOMAIN_BUS_ANY tokens
irqchip/imx-intmux: Handle pure domain searches correctly
genirq/msi: Provide MSI_FLAG_PARENT_PM_DEV
genirq/irqdomain: Reroute device MSI create_mapping
genirq/msi: Provide allocation/free functions for "wired" MSI interrupts
genirq/msi: Optionally use dev->fwnode for device domain
genirq/msi: Provide DOMAIN_BUS_WIRED_TO_MSI
...
The SVA code only works if the RID domain is a S1 domain and has already
installed the cdtable.
Originally the check for this was in arm_smmu_sva_bind() but when the op
was removed the test didn't get copied over to the new
arm_smmu_sva_set_dev_pasid().
Without the test wrong usage usually will hit a WARN_ON() in
arm_smmu_write_ctx_desc() due to a missing ctx table.
However, the next patches wil change things so that an IDENTITY domain is
not a struct arm_smmu_domain and this will get into memory corruption if
the struct is wrongly casted.
Fail in arm_smmu_sva_set_dev_pasid() if the STE does not have a S1, which
is a proxy for the STE having a pointer to the CD table. Write it in a way
that will be compatible with the next patches.
Fixes: 386fa64fd5 ("arm-smmu-v3/sva: Add SVA domain support")
Reported-by: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Closes: https://lore.kernel.org/linux-iommu/2a828e481416405fb3a4cceb9e075a59@huawei.com/
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/11-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Introducing global statics which are of type struct iommu_domain, not
struct arm_smmu_domain makes it difficult to retain
arm_smmu_master->domain, as it can no longer point to an IDENTITY or
BLOCKED domain.
The only place that uses the value is arm_smmu_detach_dev(). Change things
to work like other drivers and call iommu_get_domain_for_dev() to obtain
the current domain.
The master->domain is subtly protecting the master->domain_head against
being unused as only PAGING domains will set master->domain and only
paging domains use the master->domain_head. To make it simple keep the
master->domain_head initialized so that the list_del() logic just does
nothing for attached non-PAGING domains.
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/10-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Get closer to the IOMMU API ideal that changes between domains can be
hitless. The ordering for the CD table entry is not entirely clean from
this perspective.
When switching away from a STE with a CD table programmed in it we should
write the new STE first, then clear any old data in the CD entry.
If we are programming a CD table for the first time to a STE then the CD
entry should be programmed before the STE is loaded.
If we are replacing a CD table entry when the STE already points at the CD
entry then we just need to do the make/break sequence.
Lift this code out of arm_smmu_detach_dev() so it can all be sequenced
properly. The only other caller is arm_smmu_release_device() and it is
going to free the cdtable anyhow, so it doesn't matter what is in it.
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
This was needed because the STE code required the STE to be in
ABORT/BYPASS inorder to program a cdtable or S2 STE. Now that the STE code
can automatically handle all transitions we can remove this step
from the attach_dev flow.
A few small bugs exist because of this:
1) If the core code does BLOCKED -> UNMANAGED with disable_bypass=false
then there will be a moment where the STE points at BYPASS. Since
this can be done by VFIO/IOMMUFD it is a small security race.
2) If the core code does IDENTITY -> DMA then any IOMMU_RESV_DIRECT
regions will temporarily become BLOCKED. We'd like drivers to
work in a way that allows IOMMU_RESV_DIRECT to be continuously
functional during these transitions.
Make arm_smmu_release_device() put the STE back to the correct
ABORT/BYPASS setting. Fix a bug where a IOMMU_RESV_DIRECT was ignored on
this path.
As noted before the reordering of the linked list/STE/CD changes is OK
against concurrent arm_smmu_share_asid() because of the
arm_smmu_asid_lock.
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently arm_smmu_install_ste_for_dev() iterates over every SID and
computes from scratch an identical STE. Every SID should have the same STE
contents. Turn this inside out so that the STE is supplied by the caller
and arm_smmu_install_ste_for_dev() simply installs it to every SID.
This is possible now that the STE generation does not inform what sequence
should be used to program it.
This allows splitting the STE calculation up according to the call site,
which following patches will make use of, and removes the confusing NULL
domain special case that only supported arm_smmu_detach_dev().
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The BTM support wants to be able to change the ASID of any smmu_domain.
When it goes to do this it holds the arm_smmu_asid_lock and iterates over
the target domain's devices list.
During attach of a S1 domain we must ensure that the devices list and
CD are in sync, otherwise we could miss CD updates or a parallel CD update
could push an out of date CD.
This is pretty complicated, and almost works today because
arm_smmu_detach_dev() removes the master from the linked list before
working on the CD entries, preventing parallel update of the CD.
However, it does have an issue where the CD can remain programed while the
domain appears to be unattached. arm_smmu_share_asid() will then not clear
any CD entriess and install its own CD entry with the same ASID
concurrently. This creates a small race window where the IOMMU can see two
ASIDs pointing to different translations.
CPU0 CPU1
arm_smmu_attach_dev()
arm_smmu_detach_dev()
spin_lock_irqsave(&smmu_domain->devices_lock, flags);
list_del(&master->domain_head);
spin_unlock_irqrestore(&smmu_domain->devices_lock, flags);
arm_smmu_mmu_notifier_get()
arm_smmu_alloc_shared_cd()
arm_smmu_share_asid():
// Does nothing due to list_del above
arm_smmu_update_ctx_desc_devices()
arm_smmu_tlb_inv_asid()
arm_smmu_write_ctx_desc()
** Now the ASID is in two CDs
with different translation
arm_smmu_write_ctx_desc(master, IOMMU_NO_PASID, NULL);
Solve this by wrapping most of the attach flow in the
arm_smmu_asid_lock. This locks more than strictly needed to prepare for
the next patch which will reorganize the order of the linked list, STE and
CD changes.
Move arm_smmu_detach_dev() till after we have initialized the domain so
the lock can be held for less time.
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
This allows writing the flow of arm_smmu_write_strtab_ent() around abort
and bypass domains more naturally.
Note that the core code no longer supplies NULL domains, though there is
still a flow in the driver that end up in arm_smmu_write_strtab_ent() with
NULL. A later patch will remove it.
Remove the duplicate calculation of the STE in arm_smmu_init_bypass_stes()
and remove the force parameter. arm_smmu_rmr_install_bypass_ste() can now
simply invoke arm_smmu_make_bypass_ste() directly.
Rename arm_smmu_init_bypass_stes() to arm_smmu_init_initial_stes() to
better reflect its purpose.
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
As the comment in arm_smmu_write_strtab_ent() explains, this routine has
been limited to only work correctly in certain scenarios that the caller
must ensure. Generally the caller must put the STE into ABORT or BYPASS
before attempting to program it to something else.
The iommu core APIs would ideally expect the driver to do a hitless change
of iommu_domain in a number of cases:
- RESV_DIRECT support wants IDENTITY -> DMA -> IDENTITY to be hitless
for the RESV ranges
- PASID upgrade has IDENTIY on the RID with no PASID then a PASID paging
domain installed. The RID should not be impacted
- PASID downgrade has IDENTIY on the RID and all PASID's removed.
The RID should not be impacted
- RID does PAGING -> BLOCKING with active PASID, PASID's should not be
impacted
- NESTING -> NESTING for carrying all the above hitless cases in a VM
into the hypervisor. To comprehensively emulate the HW in a VM we
should assume the VM OS is running logic like this and expecting
hitless updates to be relayed to real HW.
For CD updates arm_smmu_write_ctx_desc() has a similar comment explaining
how limited it is, and the driver does have a need for hitless CD updates:
- SMMUv3 BTM S1 ASID re-label
- SVA mm release should change the CD to answert not-present to all
requests without allowing logging (EPD0)
The next patches/series are going to start removing some of this logic
from the callers, and add more complex state combinations than currently.
At the end everything that can be hitless will be hitless, including all
of the above.
Introduce arm_smmu_write_ste() which will run through the multi-qword
programming sequence to avoid creating an incoherent 'torn' STE in the HW
caches. It automatically detects which of two algorithms to use:
1) The disruptive V=0 update described in the spec which disrupts the
entry and does three syncs to make the change:
- Write V=0 to QWORD 0
- Write the entire STE except QWORD 0
- Write QWORD 0
2) A hitless update algorithm that follows the same rational that the driver
already uses. It is safe to change IGNORED bits that HW doesn't use:
- Write the target value into all currently unused bits
- Write a single QWORD, this makes the new STE live atomically
- Ensure now unused bits are 0
The detection of which path to use and the implementation of the hitless
update rely on a "used bitmask" describing what bits the HW is actually
using based on the V/CFG/etc bits. This flows from the spec language,
typically indicated as IGNORED.
Knowing which bits the HW is using we can update the bits it does not use
and then compute how many QWORDS need to be changed. If only one qword
needs to be updated the hitless algorithm is possible.
Later patches will include CD updates in this mechanism so make the
implementation generic using a struct arm_smmu_entry_writer and struct
arm_smmu_entry_writer_ops to abstract the differences between STE and CD
to be plugged in.
At this point it generates the same sequence of updates as the current
code, except that zeroing the VMID on entry to BYPASS/ABORT will do an
extra sync (this seems to be an existing bug).
Going forward this will use a V=0 transition instead of cycling through
ABORT if a hitfull change is required. This seems more appropriate as ABORT
will fail DMAs without any logging, but dropping a DMA due to transient
V=0 is probably signaling a bug, so the C_BAD_STE is valuable.
Add STRTAB_STE_1_SHCFG_INCOMING to s2_cfg, this was editing the STE in
place and subtly inherited the value of data[1] from abort/bypass.
Signed-off-by: Michael Shavit <mshavit@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
If the SMMU is configured to use a two level CD table then
arm_smmu_write_ctx_desc() allocates a CD table leaf internally using
GFP_KERNEL. Due to recent changes this is being done under a spinlock to
iterate over the device list - thus it will trigger a sleeping while
atomic warning:
arm_smmu_sva_set_dev_pasid()
mutex_lock(&sva_lock);
__arm_smmu_sva_bind()
arm_smmu_mmu_notifier_get()
spin_lock_irqsave()
arm_smmu_write_ctx_desc()
arm_smmu_get_cd_ptr()
arm_smmu_alloc_cd_leaf_table()
dmam_alloc_coherent(GFP_KERNEL)
This is a 64K high order allocation and really should not be done
atomically.
At the moment the rework of the SVA to follow the new API is half
finished. Recently the CD table memory was moved from the domain to the
master, however we have the confusing situation where the SVA code is
wrongly using the RID domains device's list to track which CD tables the
SVA is installed in.
Remove the logic to replicate the CD across all the domain's masters
during attach. We know which master and which CD table the PASID should be
installed in.
Right now SVA only works when dma-iommu.c is in control of the RID
translation, which means we have a single iommu_domain shared across the
entire group and that iommu_domain is not shared outside the group.
Critically this means that the iommu_group->devices list and RID's
smmu_domain->devices list describe the same set of masters.
For PCI cases the core code also insists on singleton groups so there is
only one entry in the smmu_domain->devices list that is equal to the
master being passed in to arm_smmu_sva_set_dev_pasid().
Only non-PCI cases may have multi-device groups. However, the core code
will repeat the calls to arm_smmu_sva_set_dev_pasid() across the entire
iommu_group->devices list.
Instead of having arm_smmu_mmu_notifier_get() indirectly loop over all the
devices in the group via the RID's smmu_domain, rely on
__arm_smmu_sva_bind() to be called for each device in the group and
install the repeated CD entry that way.
This avoids taking the spinlock to access the devices list and permits the
arm_smmu_write_ctx_desc() to use a sleeping allocation. Leave the
arm_smmu_mm_release() as a confusing situation, this requires tracking
attached masters inside the SVA domain.
Removing the loop allows arm_smmu_write_ctx_desc() to be called outside
the spinlock and thus is safe to use GFP_KERNEL.
Move the clearing of the CD into arm_smmu_sva_remove_dev_pasid() so that
arm_smmu_mmu_notifier_get/put() remain paired functions.
Fixes: 24503148c5 ("iommu/arm-smmu-v3: Refactor write_ctx_desc")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/4e25d161-0cf8-4050-9aa3-dfa21cd63e56@moroto.mountain/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Link: https://lore.kernel.org/r/0-v3-11978fc67151+112-smmu_cd_atomic_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The iopf_group_response() should return void, as nothing can do anything
with the failure. This implies that ops->page_response() must also return
void; this is consistent with what the drivers do. The failure paths,
which are all integrity validations of the fault, should be WARN_ON'd,
not return codes.
If the iommu core fails to enqueue the fault, it should respond the fault
directly by calling ops->page_response() instead of returning an error
number and relying on the iommu drivers to do so. Consolidate the error
fault handling code in the core.
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240212012227.119381-16-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add CONFIG_IOMMU_IOPF for page fault handling framework and select it
from its real consumer. Move iopf function declaration from iommu-sva.h
to iommu.h and remove iommu-sva.h as it's empty now.
Consolidate all SVA related code into iommu-sva.c:
- Move iommu_sva_domain_alloc() from iommu.c to iommu-sva.c.
- Move sva iopf handling code from io-pgfault.c to iommu-sva.c.
Consolidate iommu_report_device_fault() and iommu_page_response() into
io-pgfault.c.
Export iopf_free_group() and iopf_group_response() for iopf handlers
implemented in modules. Some functions are renamed with more meaningful
names. No other intentional functionality changes.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-11-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The individual iommu driver reports the iommu page faults by calling
iommu_report_device_fault(), where a pre-registered device fault handler
is called to route the fault to another fault handler installed on the
corresponding iommu domain.
The pre-registered device fault handler is static and won't be dynamic
as the fault handler is eventually per iommu domain. Replace calling
device fault handler with iommu_queue_iopf().
After this replacement, the registering and unregistering fault handler
interfaces are not needed anywhere. Remove the interfaces and the related
data structures to avoid dead code.
Convert cookie parameter of iommu_queue_iopf() into a device pointer that
is really passed.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pull iommu updates from Joerg Roedel:
"Core changes:
- Fix race conditions in device probe path
- Retire IOMMU bus_ops
- Support for passing custom allocators to page table drivers
- Clean up Kconfig around IOMMU_SVA
- Support for sharing SVA domains with all devices bound to a mm
- Firmware data parsing cleanup
- Tracing improvements for iommu-dma code
- Some smaller fixes and cleanups
ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Document Adreno clocks for Qualcomm's SM8350 SoC
- SMMUv2:
- Implement support for the ->domain_alloc_paging() callback
- Ensure Secure context is restored following suspend of Qualcomm
SMMU implementation
- SMMUv3:
- Disable stalling mode for the "quiet" context descriptor
- Minor refactoring and driver cleanups
Intel VT-d driver:
- Cleanup and refactoring
AMD IOMMU driver:
- Improve IO TLB invalidation logic
- Small cleanups and improvements
Rockchip IOMMU driver:
- DT binding update to add Rockchip RK3588
Apple DART driver:
- Apple M1 USB4/Thunderbolt DART support
- Cleanups
Virtio IOMMU driver:
- Add support for iotlb_sync_map
- Enable deferred IO TLB flushes"
* tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
iommu: Don't reserve 0-length IOVA region
iommu/vt-d: Move inline helpers to header files
iommu/vt-d: Remove unused vcmd interfaces
iommu/vt-d: Remove unused parameter of intel_pasid_setup_pass_through()
iommu/vt-d: Refactor device_to_iommu() to retrieve iommu directly
iommu/sva: Fix memory leak in iommu_sva_bind_device()
dt-bindings: iommu: rockchip: Add Rockchip RK3588
iommu/dma: Trace bounce buffer usage when mapping buffers
iommu/arm-smmu: Convert to domain_alloc_paging()
iommu/arm-smmu: Pass arm_smmu_domain to internal functions
iommu/arm-smmu: Implement IOMMU_DOMAIN_BLOCKED
iommu/arm-smmu: Convert to a global static identity domain
iommu/arm-smmu: Reorganize arm_smmu_domain_add_master()
iommu/arm-smmu-v3: Remove ARM_SMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Master cannot be NULL in arm_smmu_write_strtab_ent()
iommu/arm-smmu-v3: Add a type for the STE
iommu/arm-smmu-v3: disable stall for quiet_cd
iommu/qcom: restore IOMMU state if needed
iommu/arm-smmu-qcom: Add QCM2290 MDSS compatible
iommu/arm-smmu-qcom: Add missing GMU entry to match table
...
Now that the BLOCKED and IDENTITY behaviors are managed with their own
domains change to the domain_alloc_paging() op.
The check for using_legacy_binding is now redundant,
arm_smmu_def_domain_type() always returns IOMMU_DOMAIN_IDENTITY for this
mode, so the core code will never attempt to create a DMA domain in the
first place.
Since commit a4fdd97622 ("iommu: Use flush queue capability") the core
code only passes in IDENTITY/BLOCKED/UNMANAGED/DMA domain types. It will
not pass in IDENTITY or BLOCKED if the global statics exist, so the test
for DMA is also redundant now too.
Call arm_smmu_init_domain_context() early if a dev is available.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v2-c86cc8c2230e+160bb-smmu_newapi_jgg@nvidia.com
[will: Simplify arm_smmu_domain_alloc_paging() since 'cfg' cannot be NULL]
Signed-off-by: Will Deacon <will@kernel.org>
Create a global static identity domain with it's own
arm_smmu_attach_dev_identity() that simply calls
arm_smmu_master_install_s2crs() with the identity parameters.
This is done by giving the attach path for identity its own unique
implementation that simply calls arm_smmu_master_install_s2crs().
Remove ARM_SMMU_DOMAIN_BYPASS and all checks of IOMMU_DOMAIN_IDENTITY.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v2-c86cc8c2230e+160bb-smmu_newapi_jgg@nvidia.com
[will: Move duplicated autosuspend logic into a helper function]
Signed-off-by: Will Deacon <will@kernel.org>
Make arm_smmu_domain_add_master() not use the smmu_domain to detect the
s2cr configuration, instead pass it in as a parameter. It always returns
zero so make it return void.
Since it no longer really does anything to do with a domain call it
arm_smmu_master_install_s2crs().
This is done to make the next two patches able to re-use this code without
forcing the creation of a struct arm_smmu_domain.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-c86cc8c2230e+160bb-smmu_newapi_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
In the stall model, invalid transactions were expected to be
stalled and aborted by the IOPF handler.
However, when killing a test case with a huge amount of data, the
accelerator streamline can not stop until all data is consumed
even if the page fault handler reports errors. As a result, the
kill may take a long time, about 10 seconds with numerous iopf
interrupts.
So disable stall for quiet_cd in the non-force stall model, since
force stall model (STALL_MODEL==0b10) requires CD.S must be 1.
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Suggested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20231206005727.46150-1-zhangfei.gao@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
In some cases the firmware expects cbndx 1 to be assigned to the GMU,
so we also want the default domain for the GMU to be an identy domain.
This way it does not get a context bank assigned. Without this, both
of_dma_configure() and drm/msm's iommu_domain_attach() will trigger
allocating and configuring a context bank. So GMU ends up attached to
both cbndx 1 and later cbndx 2. This arrangement seemingly confounds
and surprises the firmware if the GPU later triggers a translation
fault, resulting (on sc8280xp / lenovo x13s, at least) in the SMMU
getting wedged and the GPU stuck without memory access.
Cc: stable@vger.kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20231210180655.75542-1-robdclark@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
A perfect driver would only call dev_iommu_priv_set() from its probe
callback. We've made it functionally correct to call it from the of_xlate
by adding a lock around that call.
lockdep assert that iommu_probe_device_lock is held to discourage misuse.
Exclude PPC kernels with CONFIG_FSL_PAMU turned on because FSL_PAMU uses a
global static for its priv and abuses priv for its domain.
Remove the pointless stores of NULL, all these are on paths where the core
code will free dev->iommu after the op returns.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
mm_get_enqcmd_pasid() should be used by architecture code and closely
related to learn the PASID value that the x86 ENQCMD operation should
use for the mm.
For the moment SMMUv3 uses this without any connection to ENQCMD, it
will be cleaned up similar to how the prior patch made VT-d use the
PASID argument of set_dev_pasid().
The motivation is to replace mm->pasid with an iommu private data
structure that is introduced in a later patch.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231027000525.1278806-4-tina.zhang@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
