The driver requests the interrupts as IRQF_SHARED, so the interrupt
handlers can be called at any time. If such a call happens while the ISP
is powered down, the SoC will hang as the driver tries to access the
ISP registers.
This can be reproduced even without the platform sharing the IRQ line:
Enable CONFIG_DEBUG_SHIRQ and unload the driver, and the board will
hang.
Fix this by adding a new field, 'irqs_enabled', which is used to bail
out from the interrupt handler when the ISP is not operational.
Link: https://lore.kernel.org/r/20231218-rkisp-shirq-fix-v1-2-173007628248@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In rkisp1_isp_stop() and rkisp1_csi_disable() the driver masks the
interrupts and then apparently assumes that the interrupt handler won't
be running, and proceeds in the stop procedure. This is not the case, as
the interrupt handler can already be running, which would lead to the
ISP being disabled while the interrupt handler handling a captured
frame.
This brings up two issues: 1) the ISP could be powered off while the
interrupt handler is still running and accessing registers, leading to
board lockup, and 2) the interrupt handler code and the code that
disables the streaming might do things that conflict.
It is not clear to me if 2) causes a real issue, but 1) can be seen with
a suitable delay (or printk in my case) in the interrupt handler,
leading to board lockup.
Link: https://lore.kernel.org/r/20231207-rkisp-irq-fix-v3-4-358a2c871a3c@ideasonboard.com
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The subdev .init_cfg() operation is affected by two issues:
- It has long been extended to initialize a whole v4l2_subdev_state
instead of just a v4l2_subdev_pad_config, but its name has stuck
around.
- Despite operating on a whole subdev state and not being directly
exposed to the subdev users (either in-kernel or through the userspace
API), .init_cfg() is categorized as a subdev pad operation.
This participates in making the subdev API confusing for new developers.
Fix it by renaming the operation to .init_state(), and make it a subdev
internal operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Michael Riesch <michael.riesch@wolfvision.net> # for imx415
Acked-by: Shuah Khan <skhan@linuxfoundation.org> # for vimc
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
[Sakari Ailus: Resolved a conflict in Renesas vsp1 driver.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use the V4L2 subdev active state API to store the active format and crop
rectangle. This simplifies the driver not only by dropping the state
stored in the rkisp1_csi structure, but also by replacing the ops_lock
with the state lock.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add v4l2_async_connection_unique() function for obtaining a struct
v4l2_async_connection, typically allocated by drivers together with their
own information on an external sub-device.
The relation between connections and sub-devices still remains 1:1 but
this code becomes more complex when the relation soon changes.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Connect the CSI receiver subdevice between the sensors and the ISP. This
includes:
- Calling the subdevice via the v4l2 subdev API
- Moving the async notifier for the sensor from the ISP to the CSI
receiver
- In the ISP, create a media link to the CSI receiver, and remove the
media link creation to the sensor
- In the CSI receiver, create a media link to the sensor
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The CSI receiver is a component separate from the ISP or the resizers.
It is actually optional, not all device model include a CSI receiver. On
some SoCs CSI-2 support can be provided through an external CSI-2
receiver, connected to the ISP's parallel input.
To support those use cases, create a V4L2 subdev to model the CSI
receiver. It will allow the driver to handle both internal and external
CSI receivers the same way.
The next commit will plumb the CSI subdev to the rest of the driver,
replacing direct function calls.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The sensor argument to rkisp1_csi_start() isn't meant to be modified by
the function. Make it const.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
To prepare for the removal of the active_sensor field from the
rkisp1_device structure, pass the sensor pointer to the
rkisp1_csi_config() function instead of accessing it through
active_sensor.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The delay in rkisp1_isp_start() is related to the CSI-2 receiver and
the camera sensor. Move it where it belongs, to rkisp1_csi_start().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The ISP layer now calls multiple functions of the CSI-2 RX layer to
configure, start and stop it, with the steps for the last two
operations. Move those calls to rkisp1_mipi_csi2_start() and
rkisp1_mipi_csi2_stop() to simplify the ISP code and the API exposed by
the CSI-2 receiver component.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
