It is possible that during error recovery and firmware reset,
there is a pending TX PTP packet waiting for the timestamp.
We need to reset this condition so that after recovery, the
tx_avail count for PTP is reset back to the initial value.
Otherwise, we may not accept any PTP TX timestamps after
recovery.
Fixes: 118612d519 ("bnxt_en: Add PTP clock APIs, ioctls, and ethtool methods")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since runtime MSIXs vector allocation/free has been removed,
the L2 driver needs to repopulate the MSIX entries for the
ulp client as the irq table may change during the recovery
process.
Fixes: 3034322113 ("bnxt_en: Remove runtime interrupt vector allocation")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If ulp = kzalloc() fails, the allocated edev will leak because it is
not properly assigned and the cleanup path will not be able to free it.
Fix it by assigning it properly immediately after allocation.
Fixes: 3034322113 ("bnxt_en: Remove runtime interrupt vector allocation")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allocate and setup the additional VNIC for ntuple filters if this
new method is supported by the firmware. Even though this VNIC is
only used for ntuple filters with direct ring destinations, we still
setup the RSS hash to be identical to the default VNIC so that each
RX packet will have the correct hash in the RX completion. This
VNIC is always at VNIC index BNXT_VNIC_NTUPLE.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On newer chips that support the ring table index method for
ntuple filters, the current scheme of using the same VNIC for
both RSS and ntuple filters will not work in all cases. An
ntuple filter can only be directed to a destination ring if
that destination ring is also in the RSS indirection table.
To support ntuple filters with any arbitratry RSS indirection
table that may only include a subset of the rings, we need to
use a separate VNIC for ntuple filters.
This patch provisions the additional VNIC. The next patch will
allocate additional VNIC from firmware and set it up.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bnxt_check_rings() is called to check if we have enough resource
assets to satisfy the new number of ethtool channels. If the asset
test fails, the ethtool operation will fail gracefully. Otherwise
we will proceed and commit to use the new number of channels. If it
fails to allocate any resources, the chip will fail to come up.
For completeness, check all possible resources before committing to
the new settings. Add the missing ring group and RSS context asset
tests in bnxt_check_rings().
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add RSS context fields to struct bnxt_hw_rings and struct bnxt_hw_resc.
With these, we can now specific the exact number of RSS contexts to
reserve and store the reserved value. The original code relies on
other resources to infer the number of RSS contexts to reserve and the
reserved value is not stored. This improved infrastructure will make
the RSS context accounting more complete and is needed by later
patches.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current code assumes that every RX ring group and every TX ring
requires a completion ring on P5_PLUS chips. Now that we have the
bnxt_hw_rings structure, add the cp_p5 field so that it can
be explicitly specified. This makes the logic more clear.
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current functions to reserve hardware rings pass in 6 different ring
or resource types as parameters. Add a structure bnxt_hw_rings to
consolidate all these parameters and pass the structure pointer instead
to these functions. Add 2 related helper functions also. This makes
the code cleaner and makes it easier to add new resources to be
reserved.
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
While individual filter structures are allocated as needed, there is an
array to keep track of the software filter IDs that we allocate ahead
of time. Rather than relying on a fixed maximum filter count to
allocate this array, get the maximum from the firmware when available.
Move these filter related maximum counts queried from the firmware to the
bnxt_hw_resc struct. If the firmware is not providing these maximum
counts, fall back to the hard-coded constant.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://lore.kernel.org/r/20240205223202.25341-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert EEE handling to use linkmode bitmaps. This prepares for removing
the legacy bitmaps from struct ethtool_keee. No functional change
intended. When replacing _bnxt_fw_to_ethtool_adv_spds() with
_bnxt_fw_to_linkmode(), remove the fw_pause argument because it's
always passed as 0.
Note:
There's a discussion on whether the underlying implementation is correct,
but it's independent of this mechanical conversion w/o functional change.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/9123bf18-a0d0-404e-a7c4-d6c466b4c5e8@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to pass EEE link modes beyond bit 32 to userspace we have to
complement the 32 bit bitmaps in struct ethtool_eee with linkmode
bitmaps. Therefore, similar to ethtool_link_settings and
ethtool_link_ksettings, add a struct ethtool_keee. In a first step
it's an identical copy of ethtool_eee. This patch simply does a
s/ethtool_eee/ethtool_keee/g for all users.
No functional change intended.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 056bce63c4 ("bnxt_en: Make PTP TX timestamp HWRM query silent")
changed a netdev_err() to netdev_WARN_ONCE().
netdev_WARN_ONCE() is it generates a kernel WARNING, which is bad, for
the following reasons:
* You do not a kernel warning if the firmware queries are late
* In busy networks, timestamp query failures fairly regularly
* A WARNING message doesn't bring much value, since the code path
is clear.
(This was discussed in-depth in [1])
Transform the netdev_WARN_ONCE() into a netdev_warn_once(), and print a
more well-behaved message, instead of a full WARN().
bnxt_en 0000:67:00.0 eth0: TS query for TX timer failed rc = fffffff5
[1] Link: https://lore.kernel.org/all/ZbDj%2FFI4EJezcfd1@gmail.com/
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Fixes: 056bce63c4 ("bnxt_en: Make PTP TX timestamp HWRM query silent")
Link: https://lore.kernel.org/r/20240125134104.2045573-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We call bnxt_half_open_nic() to setup the chip partially to run
loopback tests. The rings and buffers are initialized normally
so that we can transmit and receive packets in loopback mode.
That means page pool buffers are allocated for the aggregation ring
just like the normal case. NAPI is not needed because we are just
polling for the loopback packets.
When we're done with the loopback tests, we call bnxt_half_close_nic()
to clean up. When freeing the page pools, we hit a WARN_ON()
in page_pool_unlink_napi() because the NAPI state linked to the
page pool is uninitialized.
The simplest way to avoid this warning is just to initialize the
NAPIs during half open and delete the NAPIs during half close.
Trying to skip the page pool initialization or skip linking of
NAPI during half open will be more complicated.
This fix avoids this warning:
WARNING: CPU: 4 PID: 46967 at net/core/page_pool.c:946 page_pool_unlink_napi+0x1f/0x30
CPU: 4 PID: 46967 Comm: ethtool Tainted: G S W 6.7.0-rc5+ #22
Hardware name: Dell Inc. PowerEdge R750/06V45N, BIOS 1.3.8 08/31/2021
RIP: 0010:page_pool_unlink_napi+0x1f/0x30
Code: 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 8b 47 18 48 85 c0 74 1b 48 8b 50 10 83 e2 01 74 08 8b 40 34 83 f8 ff 74 02 <0f> 0b 48 c7 47 18 00 00 00 00 c3 cc cc cc cc 66 90 90 90 90 90 90
RSP: 0018:ffa000003d0dfbe8 EFLAGS: 00010246
RAX: ff110003607ce640 RBX: ff110010baf5d000 RCX: 0000000000000008
RDX: 0000000000000000 RSI: ff110001e5e522c0 RDI: ff110010baf5d000
RBP: ff11000145539b40 R08: 0000000000000001 R09: ffffffffc063f641
R10: ff110001361eddb8 R11: 000000000040000f R12: 0000000000000001
R13: 000000000000001c R14: ff1100014553a080 R15: 0000000000003fc0
FS: 00007f9301c4f740(0000) GS:ff1100103fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f91344fa8f0 CR3: 00000003527cc005 CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0x81/0x140
? page_pool_unlink_napi+0x1f/0x30
? report_bug+0x102/0x200
? handle_bug+0x44/0x70
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? bnxt_free_ring.isra.123+0xb1/0xd0 [bnxt_en]
? page_pool_unlink_napi+0x1f/0x30
page_pool_destroy+0x3e/0x150
bnxt_free_mem+0x441/0x5e0 [bnxt_en]
bnxt_half_close_nic+0x2a/0x40 [bnxt_en]
bnxt_self_test+0x21d/0x450 [bnxt_en]
__dev_ethtool+0xeda/0x2e30
? native_queued_spin_lock_slowpath+0x17f/0x2b0
? __link_object+0xa1/0x160
? _raw_spin_unlock_irqrestore+0x23/0x40
? __create_object+0x5f/0x90
? __kmem_cache_alloc_node+0x317/0x3c0
? dev_ethtool+0x59/0x170
dev_ethtool+0xa7/0x170
dev_ioctl+0xc3/0x530
sock_do_ioctl+0xa8/0xf0
sock_ioctl+0x270/0x310
__x64_sys_ioctl+0x8c/0xc0
do_syscall_64+0x3e/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Fixes: 294e39e0d0 ("bnxt: hook NAPIs to page pools")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240117234515.226944-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing formula used in the driver to calculate the number of RSS
table entries is to round up the number of RX rings to the next integer
multiples of 64 (e.g. 64, 128, 192, ..). This is incorrect. The valid
values supported by the chip are 64, 128, 256, 512 only (power of 2
starting from 64). When the number of RX rings is greater than 128, the
entry size will likely be wrong. Firmware will round down the invalid
value (e.g. 192 rounded down to 128) provided by the driver, causing some
RSS rings to not receive any packets.
We already have an existing function bnxt_calc_nr_ring_pages() to
do this calculation. Use it in bnxt_get_nr_rss_ctxs() to calculate the
number of RSS contexts correctly for P5_PLUS chips.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Fixes: 7b3af4f75b ("bnxt_en: Add RSS support for 57500 chips.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240117234515.226944-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the following compile error:
.../bnxt.c: In function 'bnxt_cfg_ntp_filters':
.../bnxt.c:14077:37: error: implicit declaration of function 'rps_may_expire_flow' [-Werror=implicit-function-declaration]
14077 | if (rps_may_expire_flow(bp->dev, fltr->base.rxq,
| ^~~~~~~~~~~~~~~~~~~
bnxt_cfg_ntp_filters() is only used when CONFIG_RFS_ACCEL is enabled.
User configured ntuple filters are directly added and will not go through
this function. Wrap the body of bnxt_cfg_ntp_filters() with
CONFIG_RFS_ACCEL.
Fixes: 59cde76f33 ("bnxt_en: Refactor filter insertion logic in bnxt_rx_flow_steer().")
Reported-by: Arnd Bergmann <arnd@kernel.org>
Link: https://lore.kernel.org/netdev/20240103102332.3642417-1-arnd@kernel.org/
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 2 lines to check for the BNXT_HWRM_PF_UNLOAD_SP_EVENT bit was
mis-applied to bnxt_cfg_ntp_filters() and should have been applied to
bnxt_sp_task().
Fixes: 1924136844 ("bnxt_en: Send PF driver unload notification to all VFs.")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for adding user defined ntuple TCP/UDP filters. These
filters are similar to aRFS filters except that they don't get aged.
Source IP, destination IP, source port, or destination port can be
unspecifed as wildcard. At least one of these tuples must be specifed.
If a tuple is specified, the full mask must be specified.
All ntuple related ethtool functions are now no longer compiled only
for CONFIG_RFS_ACCEL.
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
aRFS filters match all 5 tuples. User defined ntuple filters may
specify some of the tuples as wildcards. To support that, we add the
ntuple_flags to the bnxt_ntuple_filter struct to specify which tuple
fields are to be matched. The matching tuple fields will then be
passed to the firmware in bnxt_hwrm_cfa_ntuple_filter_alloc() to create
the proper filter.
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Refactor the logic into a new function bnxt_del_ntp_filters(). The
same call will be used when the user deletes an ntuple filter.
The bnxt_hwrm_cfa_ntuple_filter_free() function to call fw to free
the ntuple filter is exported so that the ethtool logic can call it.
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new function bnxt_insert_ntp_filter() to insert the ntuple filter
into the hash table and other basic setup. We'll use this function
to insert a user defined filter from ethtool.
Also, export bnxt_lookup_ntp_filter_from_idx() and bnxt_get_ntp_filter_idx()
for similar purposes. All ntuple related functions are now no longer
compiled only for CONFIG_RFS_ACCEL
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
