Now WoWLAN firmware will disable PCIE DMA after driver call cfg_wake
function, and it will lead to release offload packet fail because driver
can't receive completion notification from firmware. We move release
offload packet earlier to avoid this error.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240302005828.13666-8-pkshih@realtek.com
The 2 Bluetooth profiles (Hands free profile & Human interface device)
have high duty transmission, it will affect the traffic of WiFi packet
frequently. And once the WiFi traffic down to B/G mode, it will need
a better success rate to recover the transmission rate. Add new policy
option to solve the above situation.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240229074514.219276-9-pkshih@realtek.com
Wi-Fi firmware need some driver information to do decision or do some
real-time control. Driver will update these information by H2C command.
The chip 8922a H2C command index is different from before chips/branch,
so need to assign the correct index to let firmware parsing.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240229074514.219276-6-pkshih@realtek.com
Tenda U9 V2.0, which contains RTL8811CU, is practically unusable because
of frequent disconnections:
Feb 23 14:46:45 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS
Feb 23 14:46:46 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED
bssid=90:55:de:__:__:__ reason=4 locally_generated=1
Feb 23 14:46:52 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-CONNECTED
- Connection to 90:55:de:__:__:__ completed [id=0 id_str=]
Feb 23 14:46:54 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS
Feb 23 14:46:55 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED
bssid=90:55:de:__:__:__ reason=4 locally_generated=1
Feb 23 14:47:01 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-CONNECTED
- Connection to 90:55:de:__:__:__ completed [id=0 id_str=]
Feb 23 14:47:04 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS
Feb 23 14:47:05 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED
bssid=90:55:de:__:__:__ reason=4 locally_generated=1
This is caused by a mistake in the chip initialisation. This version of
the chip requires loading an extra AGC table right after the main one,
but the extra table is being loaded at the wrong time, in
rtw_chip_board_info_setup().
Move the extra AGC table loading to the right place, in
rtw_phy_load_tables().
The rtw_chip_board_info_setup() can only do "software" things, and
rtw_phy_load_tables() can really do IO.
Fixes: 5d6651fe85 ("rtw88: 8821c: support RFE type2 wifi NIC")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/276c31d8-b9a8-4e54-a3ac-09b74657aff7@gmail.com
Clear bit 8 of REG_SYS_STATUS1 after MAC power on.
Without this, some RTL8821CU and RTL8811CU cannot connect to any
network:
Feb 19 13:33:11 ideapad2 kernel: wlp3s0f3u2: send auth to
90:55:de:__:__:__ (try 1/3)
Feb 19 13:33:13 ideapad2 kernel: wlp3s0f3u2: send auth to
90:55:de:__:__:__ (try 2/3)
Feb 19 13:33:14 ideapad2 kernel: wlp3s0f3u2: send auth to
90:55:de:__:__:__ (try 3/3)
Feb 19 13:33:15 ideapad2 kernel: wlp3s0f3u2: authentication with
90:55:de:__:__:__ timed out
The RTL8822CU and RTL8822BU out-of-tree drivers do this as well, so do
it for all three types of chips.
Tested with RTL8811CU (Tenda U9 V2.0).
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/aeeefad9-27c8-4506-a510-ef9a9a8731a4@gmail.com
RTL8822CU, RTL8822BU, and RTL8821CU need an extra register write after
reading and writing certain addresses.
Without this, the firmware upload fails approximately more than 50% of
the time.
Tested with RTL8811CU (Tenda U9 V2.0) which is the same as RTL8821CU
but without Bluetooth.
Fixes: a82dfd33d1 ("wifi: rtw88: Add common USB chip support")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/f12ed39d-28e8-4b8b-8d22-447bcf295afc@gmail.com
Adjust beamforming capabilities to accurately reflect the supported
EHT features by WiFi 7 chip 8922A. It includes 1) Unset EHT CQI
feedback and 16-subcarrier grouping. 2) Correct Beamformee SS value.
3) Enable partial and full bandwidth SU/MU feedback.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240222064258.59782-3-pkshih@realtek.com
Add support for random serial number in probe request and
configure channel dwell time. Advertise corresponding feature flag
NL80211_EXT_FEATURE_SCAN_RANDOM_SN and NL80211_EXT_FEATURE_SET_SCAN_DWELL.
Use the scan request duration as channel dwell time when it is
non-zero, otherwise use the default value.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240222064258.59782-2-pkshih@realtek.com
Map USB endpoints to hardware and AC queues according to number of USB
endpoints. However, original only give a warning for unexpected cases but
initial values are not given. Then, smatch warns:
drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:642
_rtl92cu_init_chipn_two_out_ep_priority() error: uninitialized symbol 'valuelow'.
drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:644
_rtl92cu_init_chipn_two_out_ep_priority() error: uninitialized symbol 'valuehi'.
drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:649
_rtl92cu_init_chipn_two_out_ep_priority() error: uninitialized symbol 'valuehi'.
drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:650
_rtl92cu_init_chipn_two_out_ep_priority() error: uninitialized symbol 'valuelow'.
The regular selection is high and low queues, so move default (unexpected)
case along with that.
Compile tested only.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240216033949.34765-1-pkshih@realtek.com
The 'vif' is from tx_info of SKB, and other codes check 'vif' before using,
which raises smatch warnings:
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5656 rtl8xxxu_tx()
warn: variable dereferenced before check 'vif' (see line 5553)
Compile tested only.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240216033923.34683-1-pkshih@realtek.com
rtl8192cu is checking rtl_mac.tids when deciding if it should enable
aggregation. This is wrong because rtl_mac.tids is not initialised
anywhere. Check rtl_sta_info.tids instead, which is initialised.
Also, when enabling aggregation also enable RTS. The vendor driver does
this, my router does this. It seems like the thing to do.
Also also, it seems right to set the AMPDU density only when enabling
aggregation.
Also also also, delete the unused member rtl_mac.tids and the unused
macros RTL_AGG_ON and RTL_AGG_OFF.
Naturally, with working AMPDU the download/upload speeds are better.
Before: 59/32 Mbps.
After: 68/46 Mbps.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/4e936334-5f81-403f-a495-0628ebfb6903@gmail.com
Currently, function to check if beacon countdown is complete uses deflink
to fetch the beacon and check the counter. However, with MLO, there is
a need to check the counter for the beacon in a particular link.
Add support to use link_id in order to fetch the beacon from a particular
link data.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240216144621.514385-2-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
And use the stored addresses in rtl8192cu instead of hardcoding them.
This is what the vendor drivers do.
Perhaps this is not strictly necessary for RTL8192CU devices. However,
the dual mac version of RTL8192DU has two USB interfaces, each with its
own set of endpoints. Hardcoding their addresses in the upcoming
rtl8192du driver would require making some assumptions which I'm not
qualified to make.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/7b6a602a-6101-4bab-958d-bcff4d565b40@gmail.com
rtl8192cu handles 1T1R devices (RTL8188CUS), 1T2R devices (RTL8191CU),
and 2T2R devices (RTL8192CU). The 2T2R devices were incorrectly detected
as 1T2R because of a mistake in the IS_92C_1T2R macro.
The visible effect of this is that the firmware was allowed to use
TX rates only up to MCS7.
Fix the IS_92C_1T2R macro.
Now my 2T2R device has much better upload speed.
Before: 46 Mbps.
After: 82 Mbps.
Also fix a debug message which was printing "RF_1T1R" even for 1T2R
chips.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/ed960059-5c77-422d-ac4e-fe9fc9d0d296@gmail.com
On Wi-Fi 7 chips, concurrent stuffs are supported by FW MRC series
(multi-role concurrent) functions. And, driver has implemented the
corresponding SW handling in patches in front of this one. Now, we
extend SW MCC (multi-channel concurrent) flow to work on Wi-Fi 7
chips.
In SW point of view, things look as below.
| SW | | FW func |
| | | H2C/C2H |
--------------------------------------------
| | ax |
| | /----| FW MCC func |
| MCC | -- chip --+ |
| | \----| FW MRC func |
| | be |
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240213073514.23796-5-pkshih@realtek.com
Implement MRC (multiple role concurrent) H2C commands. Mainly deal with
H2C format, LE type built from CPU value, default setting on some fields,
and then sending the command to FW. Besides, MRC start, MRC delete, and
MRC request TSF need to wait for a report from C2H events.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240213073514.23796-4-pkshih@realtek.com
For Wi-Fi 7 chips, FW supports MRC (multi-role concurrent) functions
including H2C commands and C2H events. We can consider FW MRC functions
as a superset of FW MCC (multi-channel concurrent) functions. And, MRC
functions can take MLO things into account.
Basically before MLO, SW can also manipulate FW MRC to work original
SW MCC flow. So, we add them first and implement the handling in the
following. And then, SW MCC will call different series of FW functions
according to chip later.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240213073514.23796-2-pkshih@realtek.com
Since WiFi 7 is expected to support MLO, so we should enable MAC-0/1 and
PHY-0/1. By default, set dbcc_en=true, change quota to DBCC mode, and set
MLO mode to 2 + 0 that means we only use 2x2 connection on MAC/PHY-0
for now.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240209065229.34515-12-pkshih@realtek.com
