This driver takes on the order of 15ms to start on some systems. Even on
systems where there is no lightbar support, it can take a few
milliseconds just to probe the EC for support. It shouldn't have many
cross-device dependencies to race with, nor racy access to shared state
with other drivers, so this should be a relatively low risk change.
This driver was pinpointed as part of a survey of top slowest initcalls
(i.e., are built in, and probing synchronously) on a lab of ChromeOS
systems.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20221101152132.v2.4.I565598102e0bfb03bdf8c090d3bfdf954d026bc5@changeid
This driver takes on the order of 40ms to start on some systems. It
shouldn't have many cross-device dependencies to race with, nor racy
access to shared state with other drivers, so this should be a
relatively low risk change.
This driver was pinpointed as part of a survey of top slowest initcalls
(i.e., are built in, and probing synchronously) on a lab of ChromeOS
systems.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20221101152132.v2.3.Ic9a4f378f73319da323cd55940012fa6b1de24f4@changeid
This patch introduces a driver for the ChromeOS human presence
sensor (aka. HPS). The driver supports a sensor connected to the I2C bus
and identified as "GOOG0020" in the ACPI tables.
When loaded, the driver exports the sensor to userspace through a
character device. This device only supports power management, i.e.,
communication with the sensor must be done through regular I2C
transmissions from userspace.
Power management is implemented by enabling the respective power GPIO
while at least one userspace process holds an open fd on the character
device. By default, the device is powered down if there are no active
clients.
Note that the driver makes no effort to preserve the state of the sensor
between power down and power up events. Userspace is responsible for
reinitializing any needed state once power has been restored.
The device firmware, I2C protocol and other documentation is available
at https://chromium.googlesource.com/chromiumos/platform/hps-firmware.
Co-developed-by: Sami Kyöstilä <skyostil@chromium.org>
Signed-off-by: Sami Kyöstilä <skyostil@chromium.org>
Signed-off-by: Dan Callaghan <dcallagh@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20221018040623.2173441-1-dcallagh@chromium.org
Pull chrome platform updates from Tzung-Bi Shih:
"cros_ec_proto:
- Fix protocol failure if EC firmware jumps to RO part
cros_typec_switch:
- Add USB Type-C switch driver for mode switches and retimers
- Integrate to EC for retimers, status update, and mode switches
- Clean-ups
cros_ec_typec:
- Clean-ups
- Use partner PDOs to register USB PD capabilities
chromeos_laptop:
- Fix a double-free
cros_ec_chardev:
- Check data length from userland to avoid a memory corruption
cros_ec:
- Expose suspend_timeout_ms in debugfs
- Notify the PM about wake events during resume"
* tag 'tag-chrome-platform-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec: Notify the PM of wake events during resume
platform/chrome: cros_ec_typec: Register partner PDOs
platform/chrome: cros_typec_switch: Inline DRV_NAME
platform/chrome: cros_typec_switch: Use PTR_ERR_OR_ZERO() to simplify
platform/chrome: cros_typec_switch: Remove impossible condition
platform/chrome: cros_typec_switch: Add missing newline on printk
platform/chrome: cros_ec_typec: Correct alt mode index
platform/chrome: cros_ec_typec: Add bit offset for DP VDO
platform/chrome: cros_ec: Expose suspend_timeout_ms in debugfs
platform/chrome: fix memory corruption in ioctl
platform/chrome: fix double-free in chromeos_laptop_prepare()
platform/chrome: cros_ec_typec: Get retimer handle
platform/chrome: cros_ec_typec: Cleanup switch handle return paths
platform/chrome: cros_typec_switch: Register mode switches
platform/chrome: cros_typec_switch: Add event check
platform/chrome: cros_typec_switch: Set EC retimer
platform/chrome: cros_typec_switch: Add switch driver
platform/chrome: Add Type-C mux set command definitions
platform/chrome: cros_ec_proto: Update version on GET_NEXT_EVENT failure
cros_ec_handle_event in the cros_ec driver can notify the PM of wake
events. When a device is suspended, cros_ec_handle_event will not check
MKBP events. Instead, received MKBP events are checked during resume by
cros_ec_report_events_during_suspend. But
cros_ec_report_events_during_suspend cannot notify the PM if received
events are wake events, causing wake events to not be reported if
received while the device is suspended.
Update cros_ec_report_events_during_suspend to notify the PM of wake
events during resume by calling pm_wakeup_event.
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220913204954.2931042-1-jthies@google.com
In modern Chromebooks, the embedded controller has a mechanism where
it will watch a hardware-controlled line that toggles in suspend, and
wake the system up if an expected sleep transition didn't occur. This
can be very useful for detecting power management issues where the
system appears to suspend, but doesn't actually reach its lowest
expected power states.
Sometimes it's useful in debug and test scenarios to be able to control
the duration of that timeout, or even disable the EC timeout mechanism
altogether. Add a debugfs control to set the timeout to values other
than the EC-defined default, for more convenient debug and
development iteration.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220822144026.v3.1.Idd188ff3f9caddebc17ac357a13005f93333c21f@changeid
[tzungbi: fix one nit in Documentation/ABI/testing/debugfs-cros-ec.]
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
If chromeos_laptop_prepare_i2c_peripherals() fails after allocating memory
for 'cros_laptop->i2c_peripherals', this memory is freed at 'err_out' label
and nonzero value is returned. Then chromeos_laptop_destroy() is called,
resulting in double-free error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Fixes: 5020cd29d8 ("platform/chrome: chromeos_laptop - supply properties for ACPI devices")
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220813220843.2373004-1-subkhankulov@ispras.ru
The ChromeOS EC updates Type-C status events when mux set requests from
the Application Processor (AP) are completed. Add a check to the
flow of configuring muxes to look for this status done bit, so that
the driver is aware that the mux set completed successfully or not.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220816214857.2088914-5-pmalani@chromium.org
Introduce a driver to configure USB Type-C mode switches and retimers
which are controlled by the ChromeOS EC (Embedded Controller).
This allows Type-C port drivers, as well as alternate mode drivers to
configure their relevant mode switches and retimers according to the
Type-C state they want to achieve.
ACPI devices with ID GOOG001A will bind to this driver.
Currently, we only register a retimer switch with a stub set function.
Subsequent patches will implement the host command set functionality,
and introduce mode switches.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220816214857.2088914-3-pmalani@chromium.org
Some EC based devices (e.g. Fingerpint MCU) can jump to RO part of the
firmware (intentionally or due to device reboot). The RO part doesn't
change during the device lifecycle, so it won't support newer version
of EC_CMD_GET_NEXT_EVENT command.
Function cros_ec_query_all() is responsible for finding maximum
supported MKBP event version. It's usually called when the device is
running RW part of the firmware, so the command version can be
potentially higher than version supported by the RO.
The problem was fixed by updating maximum supported version when the
device returns EC_RES_INVALID_VERSION (mapped to -ENOPROTOOPT). That way
the kernel will use highest common version supported by RO and RW.
Fixes: 3300fdd630 ("platform/chrome: cros_ec: handle MKBP more events flag")
Cc: <stable@vger.kernel.org> # 5.10+
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220802154128.21175-1-pdk@semihalf.com
drivers/platform/chrome/cros_kbd_led_backlight.c got a new build warning
when using the randconfig in [1]:
>>> warning: unused variable 'keyboard_led_drvdata_ec_pwm'
The warning happens when CONFIG_CROS_EC is set but CONFIG_OF is not set.
Reproduce:
- mkdir build_dir
- wget [1] -O build_dir/.config
- COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 \
O=build_dir ARCH=s390 SHELL=/bin/bash drivers/platform/chrome/
Fix the warning by using __maybe_unused. Also use IS_ENABLED() because
CROS_EC is a tristate.
[1]: https://download.01.org/0day-ci/archive/20220717/202207170538.MR39dw8m-lkp@intel.com/config
Fixes: 40f5814374 ("platform/chrome: cros_kbd_led_backlight: support EC PWM backend")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220718105047.2356542-1-tzungbi@kernel.org
EC returns EC_RES_IN_PROGRESS if the host command needs more time to
complete. Whenever receives the return code, cros_ec_send_command()
sends EC_CMD_GET_COMMS_STATUS to query the command status.
Separate cros_ec_wait_until_complete() from cros_ec_send_command().
It sends EC_CMD_GET_COMMS_STATUS and waits until the previous command
was completed, or encountered error, or timed out.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220718050914.2267370-7-tzungbi@kernel.org
