of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 11cb8da018 ("power: supply: Add charger driver for Rockchip RK817")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Reviewed-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
bq25890_platform_data.regulator_init_data is intended to only provide
regulator init_data for the vbus regulator.
Remove this from the regulator_config before registering the vsys
regulator. Otherwise the regulator_register() call for vsys will fail
because it tries to register duplicate consumer_dev_name + supply
names from init_data->consumer_supplies[], leading to the entire
probe of the bq25890 driver failing:
[ 32.017501] bq25890-charger i2c-bq25892_main: Failed to set supply vbus
[ 32.017525] bq25890-charger i2c-bq25892_main: error -EBUSY: registering vsys regulator
[ 32.124978] bq25890-charger: probe of i2c-bq25892_main failed with error -16
Fixes: 14a3d159ab ("power: supply: bq25890: Add Vsys regulator")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The ab8500_charger_init() returns the platform_driver_register() directly
without checking its return value, if platform_driver_register() failed,
all ab8500_charger_component_drivers are not unregistered.
Fix by unregister ab8500_charger_component_drivers when
platform_driver_register() failed.
Fixes: 1c1f13a006 ("power: supply: ab8500: Move to componentized binding")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
cw_bat_probe() calls create_singlethread_workqueue() and not checked the
ret value, which may return NULL. And a null-ptr-deref may happen:
cw_bat_probe()
create_singlethread_workqueue() # failed, cw_bat->wq is NULL
queue_delayed_work()
queue_delayed_work_on()
__queue_delayed_work() # warning here, but continue
__queue_work() # access wq->flags, null-ptr-deref
Check the ret value and return -ENOMEM if it is NULL.
Fixes: b4c7715c10 ("power: supply: add CellWise cw2015 fuel gauge driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
If devm_gpiod_get_optional() returns error, the charger should be
freed before z2_batt_probe returns according to the context. We
fix it by just gotoing to 'err' branch.
Fixes: a3b4388ea1 ("power: supply: z2_battery: Convert to GPIO descriptors")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use devm variants for requesting threaded IRQ and for power-supply
registration. Clean up error path and remove the .remove-callback.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
If device_add() succeeds, we should call device_del() when want to
get rid of it, so move it into proper jump symbol.
Otherwise, when __power_supply_register() returns fail and goto
wakeup_init_failed to exit, there is still residue device file in sysfs.
When attempt to probe device again, sysfs would complain as below:
sysfs: cannot create duplicate filename '/devices/platform/i2c/i2c-0/0-001c/power_supply/adp5061'
Call Trace:
dump_stack_lvl+0x68/0x85
sysfs_warn_dup.cold+0x1c/0x29
sysfs_create_dir_ns+0x1b1/0x1d0
kobject_add_internal+0x143/0x390
kobject_add+0x108/0x170
Fixes: 80c6463e2f ("power_supply: Fix Oops from NULL pointer dereference from wakeup_source_activate")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The call thermal_zone_get_zone_by_name() used to return the
thermal zone right away, but recent refactorings in the
thermal core has changed this so the thermal zone used by
the battery is probed later, and the call returns -ENODEV.
This was always quite fragile. If we get -ENODEV, then
return a -EPROBE_DEFER and try again later.
Cc: phone-devel@vger.kernel.org
Fixes: 2b0e7ac084 ("power: supply: ab8500: Integrate thermal zone")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
When current is larger than ~2A, the multiplication in current_now
property overflows and the kernel reports invalid negative current
value. Change the numerator and denominator while preserving their
ratio to allow up to +-6A before the overflow.
Fixes: 75853406fa ("power: supply: Add a driver for Injoinic power bank ICs")
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Samuel Holland <samuel@sholland.org>
[use 149197/200 instead of 261095/350 as suggested by Samuel]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The function power_supply_vbat2ri() does not have a parameter called table,
despite it being mentioned in the kernel-doc comment. The table is actually
obtained from the info parameter, the battery information container. Hence,
./scripts/kernel-doc -none drivers/power/supply/power_supply_core.c warns
about this excess function parameter.
Adjust the kernel-doc comment for power_supply_vbat2ri() for make W=1
happiness.
Fixes: e9e7d165b4 ("power: supply: Support VBAT-to-Ri lookup tables")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The chip is capable of reporting Vsys voltage supplied to the system.
Add regulator which represents the Vsys supply. This can be used e.g.
as a supply for system PMIC input.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The chip is capable of reporting Vbus voltage, add .get_voltage
implementation to Vbus regulator to report current Vbus voltage.
This requires for the Vbus regulator to be registered always
instead of the current state where the regulator is registered
only in case USB PHY is not found.
Do not provide Vbus regulator enable/disable ops in case USB PHY
is present, as they would race with USB PHY notifier which is also
used to toggle OTG boost mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Pull the regulator registration code into separate function, so it can
be extended to register more regulators later. Currently this is only
moving ifdeffery into one place and other preparatory changes. The
dev_err_probe() output string is changed to explicitly list vbus
regulator failure, so that once more regulators are registered, it
would be clear which one failed.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Let user set battery charge current and voltage limit via sysfs. This is
useful in case the user space needs to reduce charge current to keep the
system within thermal limits. The maximum charge current and voltage are
still limited to "ti,charge-current" and "ti,battery-regulation-voltage"
values to avoid damaging the hardware in case too high values are set by
user space.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Clean up misuse of POWER_SUPPLY_PROP_VOLTAGE,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX
and POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE
and document what exactly each value means.
The POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE content is newly read
back from hardware, while POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX
is reported as the maximum value set in DT.
The POWER_SUPPLY_PROP_VOLTAGE is newly used to report immediate value
of battery voltage V_BAT, which is what this property was intended to
report and which has been thus far misused to report the charger chip
output voltage V_SYS.
The V_SYS is no longer reported as there is currently no suitable
property to report V_SYS. V_SYS reporting will be reinstated in
subsequent patch.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Clean up misuse of POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT and
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX and document what
exactly each value means.
The POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT content is newly read
back from hardware, while POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX
is reported as the maximum value set in DT.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Document that POWER_SUPPLY_PROP_CURRENT_NOW really does refer to ADC-sampled
immediate battery charge current I_BAT , since the meaning is not clear with
all the currents which might be measured by charger chips.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Don't populate the read-only array name on the stack but instead make
it static. Since the data and the pointers don't change also add in
a missing const. Also makes the object code a little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Change return value of rk817_chg_cur_to_reg from u8 to int. If the
function fails to find a suitable value it returns a -EINVAL, but
defined as a u8 it would not return correctly. Additionally, change
defined variable that stores return value from u8 to int.
Fixes: 11cb8da018 ("power: supply: Add charger driver for Rockchip RK817")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This code checks "->chg_ps" twice when it was supposed to check
"->bat_ps".
Fixes: 11cb8da018 ("power: supply: Add charger driver for Rockchip RK817")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
