The sof imx pcm device is a device which should support
double buffering.
Found this issue with pipewire. When there is no
SNDRV_PCM_INFO_BATCH flag in driver, the pipewire will
set headroom to be zero, and because sof pcm device
don't support residue report, when the latency setting
is small, the "delay" always larger than "target" in
alsa-pcm.c, that reading next period data is not
scheduled on time.
With SNDRV_PCM_INFO_BATCH flag in driver, the pipewire
will select a smaller period size for device, then
the task of reading next period data will be scheduled
on time.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1703669263-13832-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
The SOF platform drivers all use either sof_of_remove() or
sof_acpi_remove() which both return zero unconditionally. Change these
functions to return void and the drivers to use .remove_new(). There is
no semantical change.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231009155945.285537-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The new IPC4 version is only supported by Intel platforms, iMX, AMD and
MediaTek only uses the standard SOF IPC.
There is no need for these platforms to build kernel support for IPC4 as
it is just dead code for them.
SND_SOC_SOF_IPC3 and SND_SOC_SOF_INTEL_IPC4 is introduced to allow compile
time selection and exclusion of IPC implementations.
To avoid randconfig failures add also support for runtime selection of
the IPC ops in ipc.c based on sdev->pdata->ipc_type
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220614075618.28605-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Resume common flow (System PM / Runtime PM) is like this:
sof_resume
-> specific device resume
-> snd_sof_load_firmware
-> snd_sof_dsp_reset (1)
-> load_modules()
-> snd_sof_run_firmware (2)
We need to implement dsp_reset callback (1) that will actually reset
the DSP but keep it stalled.
In order to implement this we do the following:
-> put DSP into reset (assert CoreReset bit from PWRCTL)
-> stall the DSP using RunStall bit from AudioDSP_REG2 mix
-> take DSP out of reset (de-assert CoreReset bit from PWRCTL)
At this moment the DSP is taken out of reset and Stalled! This means
that we can load the firmware and then start the DSP (2).
Until now we resetted the DSP by turning down the Audiomix PD. This
doesn't work for Runtime PM if another IP is keeping Audiomix PD up.
By introducing dsp_reset() we no longer rely on turning off the
audiomix to reset the DSP.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211119094319.81674-6-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We make use of common imx8m_suspend / imx8m_resume functions
for both system PM and runtime PM.
imx8m_suspend:
- frees the MU channels
- disables the clocks
imx8m_resume
- enables the clocks
- requests the MU channels
On i.MX8MP there is no dedicated functionality to put the DSP in reset.
The only way of doing this is to POWER DOWN the Audiomix domain.
We are able to do this because turning off the clocks and freeing the
channels makes the Audiomix to have no users thus PM kernel core turns
it down.
SOF core will not call system PM suspend handler if the DSP is already
down, but at resume it will call the system PM resume. So, we need to
keep track of the state via snd_sof_dsp_set_power_state
Few insights on how SOF core handles the PM:
- SOF core uses PM runtime autosuspend (with a timeout of 2 secs)
- at probe, SOF core boots the DSP and lets the PM runtime suspend to
turn it off, if there is no activity
- when someone opens the ALSA sound card (aplay/arecord, etc) ALSA core
calls PM runtime resume to turn on the DSP
- when the ALSA sound card is closed SOF core make use of PM subsystem
to call PM runtime suspend and thus turning off the DSP.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211119094319.81674-4-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Handle clocks and mailbox channels at runtime suspend/resume
in order to save power.
DSP runtime PM uses a timeout of 2s. If device
is idle for 2s system will enter runtime suspend.
Because SOF state machine assumes that even if the DSP wasn't previously
active at a System resume, will re-load the firmware we need to make sure
that all needed resources are active.
Kernel core will take care of enabling the PD, we need to make sure that
we request the MU channels.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211119094319.81674-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need at least 3 clocks in order to power up and access
DSP core registers found on i.MX8QM, i.MX8QXP and i.MX8MP
platforms.
Add code to request these clocks and enable them at probe. Next
patches will add PM support which will only activate clocks when
DSP is used.
DSP clocks are already documented in
Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
We choose to add:
* imx8_parse_clocks
* imx8_enable_clocks
* imx8_disable_clocks
wrappers because in the future DSP will need to take care about the
clocks of other related Audio IPs (e.g SAI, ESAI).
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211119094319.81674-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch prepares the introduction of the compress API with SOF.
After each fragment is accepted by the DSP we need to inform
the userspace applications that they can send the next fragment.
This is done via snd_compr_fragment_elapsed.
Similar with the PCM case, in order to avoid sending an IPC before
the previous IPC is handled we need to schedule a delayed work to
call snd_compr_fragment_elapsed().
See snd_sof_pcm_period_elapsed.
To sum up this patch offers the following API to SOF code:
* snd_sof_compr_init_elapsed_work
* snd_sof_compr_fragment_elapsed
Note that implementation for compressed function is in a new file
selected via CONFIG_SND_SOC_SOF_COMPRESS invisible config option.
This option is automatically selected for platforms that support
the compress interface. For now only i.MX8 platforms support this.
For symmetry we introduce snd_sof_pcm_init_elapsed_work to setup
the work struct for PCM case.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Bud Liviu-Alexandru <budliviu@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211004152147.1268978-5-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds debug support for imx platforms. This is important in
order to gather information about the state of the DSP in case of an
oops and the reason for the oops.
This is done by checking if a message with a panic code has been placed
in the debug box, in the imx8_dsp_handle_request function from sof/imx.
If positive, the function imx8_dump, added in common, will be called.
The first step is to gather information about the registers, filename,
line number and stack by calling the imx8_get_registers, added in common.
Then the information will be printed to the console by calling the
get_status function.
Signed-off-by: Iulian Olaru <iulianolaru249@yahoo.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917105633.2579047-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
