The Glymur platform has four DisplayPort controllers. The hardware
supports four streams (MST) per controller. However, on Glymur the first
three controllers only have two streams wired to the display subsystem,
while the fourth controller operates in single-stream mode.
Add a dedicated clause for the Glymur compatible to require the register
ranges for all four stream blocks, while allowing either one pixel clock
(for the single-stream controller) or two pixel clocks (for the remaining
controllers).
Update the Glymur MDSS schema example by adding the missing p2, p3,
mst2link and mst3link register blocks. Without these, the bindings
validation fails. Also replace the made-up register addresses with the
actual addresses from the first controller to match the SoC devicetree
description.
Cc: stable@vger.kernel.org # v6.19
Fixes: 8f63bf9082 ("dt-bindings: display: msm: Document the Glymur DiplayPort controller")
Fixes: 1aee577bbc ("dt-bindings: display: msm: Document the Glymur Mobile Display SubSystem")
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/708518/
Link: https://lore.kernel.org/r/20260303-glymur-fix-dp-bindings-reg-clocks-v4-1-1ebd9c7c2cee@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
RGMU a.k.a Reduced Graphics Management Unit is a small state machine
with the sole purpose of providing IFPC (Inter Frame Power Collapse)
support. Compared to GMU, it doesn't manage GPU clock, voltage
scaling, bw voting or any other functionalities. All it does is detect
an idle GPU and toggle the GDSC switch. As it doesn't access DDR space,
it doesn't require iommu.
So far, only Adreno 612 GPU has an RGMU core. Document it in
qcom,adreno-rgmu.yaml.
Signed-off-by: Jie Zhang <jie.zhang@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/696679/
Message-ID: <20251231-qcs615-spin-2-v6-4-da87debf6883@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Pull SoC devicetree updates from Arnd Bergmann:
"Three new SoCs got added in existing arm64 chip families:
- Renesas R-Car X5H (R8A78000) is a new generation of automotive
SoCs, based on 16 Cortex-A720 (Armv9.2) cores, which makes the the
currently highest-perforance embedded SoC.
- TI AM62L is a new variant of the AM62 family of industrial SoCs,
this one comes without a GPU.
- Qualcomm MSM8937 (Snapdragon 430) is an older mobile phone chip
based on Cortex-A53, and closely related to MSM8917 (Snapdragn
425), which we already support.
In addition, there are a good number of newly supported machines
across SoC families:
- Two Aspeed AST2600 (Cortex-A7) based BMC setups for large servers
- Mobile Phones and tables based on Mediatek MT6582, Nvidia Tegra124,
Qualcomm MSM8937 and Qualcomm MSM8939,
- Two Laptops based on Qualcomm SoCs: one using the older sdm850, the
other using x1p42100.
- One Router based on Rockchips RK3568
- 24 variants of the Enclustra Mercury system-on-module, all based on
32-bit Intel/Altera SocFPGA chips, plus two boards using 64-bit
SocFPGA Agilex chips..
- 30 industrial/embedded boards and single-board computers, using
various chips from NXP, Rockchips, Mediatek, TI, Amlogic, Qualcomm,
Spacemit, and Starfive.
In total there are 783 commits here, the majority of these improving
hardware support and cleaning up devicetree files across the tree,
with the majority of the changes going into the Qualcomm, NXP, Renesas
and Rockchips platforms"
* tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (782 commits)
arm64: dts: mediatek: mt8195: Fix address range for JPEG decoder core 1
ARM: dts: samsung: exynos4412-midas: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-trats: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-i9100: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: universal_c210: turn off SDIO WLAN chip during system suspend
arm64: dts: amlogic: meson-g12b: Fix L2 cache reference for S922X CPUs
arm64: dts: Add gpio_intc node for Amlogic S7D SoCs
arm64: dts: Add gpio_intc node for Amlogic S7 SoCs
arm64: dts: Add gpio_intc node for Amlogic S6 SoCs
arm64: dts: amlogic: s7d: add ao secure node
arm64: dts: amlogic: s7: add ao secure node
arm64: dts: amlogic: s6: add ao secure node
arm64: dts: amlogic: Fix the register name of the 'DBI' region
dts: arm64: amlogic: add a5 pinctrl node
arm64: dts: amlogic: s7d: add power domain controller node
arm64: dts: amlogic: s7: add power domain controller node
arm64: dts: amlogic: s6: add power domain controller node
dts: arm64: amlogic: Add ISP related nodes for C3
arm64: dts: meson: add initial device-tree for Tanix TX9 Pro
dt-bindings: arm: amlogic: add support for Tanix TX9 Pro
...
Pull devicetree updates from Rob Herring:
"DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data()
helpers and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the
code to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
in a parent node) on nodes without an interrupt. This matches the
spec description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI"
* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: kbuild: Skip validating empty examples
dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
soc: tegra: Simplify with of_machine_device_match()
soc: qcom: ubwc: Simplify with of_machine_get_match_data()
powercap: dtpm: Simplify with of_machine_get_match_data()
platform: surface: Simplify with of_machine_get_match_data()
irqchip/atmel-aic: Simplify with of_machine_get_match_data()
firmware: qcom: scm: Simplify with of_machine_device_match()
cpuidle: big_little: Simplify with of_machine_device_match()
cpufreq: sun50i: Simplify with of_machine_device_match()
cpufreq: mediatek: Simplify with of_machine_get_match_data()
cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
of: Add wrappers to match root node with OF device ID tables
dt-bindings: eeprom: at25: Add Anvo ANV32C81W
of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
...
Extra drm-misc-next for v6.19-rc1:
UAPI Changes:
- Add support for drm colorop pipeline.
- Add COLOR PIPELINE plane property.
- Add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE.
Cross-subsystem Changes:
- Attempt to use higher order mappings in system heap allocator.
- Always taint kernel with sw-sync.
Core Changes:
- Small fixes to drm/gem.
- Support emergency restore to drm-client.
- Allocate and release fb_info in single place.
- Rework ttm pipelined eviction fence handling.
Driver Changes:
- Support the drm color pipeline in vkms, amdgfx.
- Add NVJPG driver for tegra.
- Assorted small fixes and updates to rockchip, bridge/dw-hdmi-qp,
panthor.
- Add ASL CS5263 DP-to-HDMI simple bridge.
- Add and improve support for G LD070WX3-SL01 MIPI DSI, Samsung LTL106AL0,
Samsung LTL106AL01, Raystar RFF500F-AWH-DNN, Winstar WF70A8SYJHLNGA,
Wanchanglong w552946aaa, Samsung SOFEF00, Lenovo X13s panel.
- Add support for it66122 to it66121.
- Support mali-G1 gpu in panthor.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/aa5cbd50-7676-4a59-bbed-e8428af86804@linux.intel.com
Commit 6cfcbe548a ("dt-bindings: display: Add BCM2712 HVS bindings")
added the compatible string for BCM2712, but missed out that
the number of interrupts and clocks changed too.
The driver commit 7687a12153 ("drm/vc4: hvs: Add support for BCM2712
HVS") also requires that both interrupts and clocks are named, so the
relevant -names properties are also added to "required" for BCM2712.
Update to validate clock, interrupts, and their names for the BCM2712
variant. (There should be no change in the binding requirements for
the other variants).
Fixes: 6cfcbe548a ("dt-bindings: display: Add BCM2712 HVS bindings")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patch.msgid.link/20241220-dt-bcm2712-fixes-v5-2-cbbf13d2e97a@raspberrypi.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Commit 62948c62ab ("dt-bindings: display: Add BCM2712 HDMI bindings")
added the compatible strings for BCM2712, but missed out that the
number of interrupts changed with the "wakeup" interrupt not present in
the BCM7212.
Update the schema to correct the interrupt requirements for BCM2712.
(Requirements for BCM2711 should be unchanged).
Fixes: 62948c62ab ("dt-bindings: display: Add BCM2712 HDMI bindings")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patch.msgid.link/20241220-dt-bcm2712-fixes-v5-1-cbbf13d2e97a@raspberrypi.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Changes for v6.19:
GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- A few NULL check fixes
MDSS:
- Added support for Glymur and QCS8300 platforms
DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- Misc small fixes
DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615 as
supported
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://patch.msgid.link/CACSVV00sFi65XrZipHCU3C0bYji7vgu7OgWvLeOQ1Cg475_pUA@mail.gmail.com
Reason for moving from simple panel is this DDIC has three supplies,
while panel-simple-dsi is limited to one.
Previous compatible only described the DDIC, but didn't include panel
connected to it. Let's fix it, and offer bindings authors two
compatibles to distinguish the connected panel.
Basic description for SOFEF00 DDIC with attached panels
- Samsung AMS601NT22 6.01 inch, 1080x2160 pixels, 18:9 ratio
- Samsung AMS628NW01 6.28 inch, 1080x2280 pixels, 19:9 ratio
There is only one user which uses samsung,sofef00 and it's updated to
comply within this patch series.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-1-6cd55471e84e@ixit.cz
Add missing ref on panel-common.yaml for this dsi panel so that common
properties can be shared.
Drop reset-gpios and backlight as they are already in panel-common.
Switch from additionalProperties to unevaluatedProperties so that common
panel properties are available without repeating them in this binding.
Notably panel-common defines the "port" property for linking panels to a
source - which was missing from this panel. Mark it as required.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251117-imx8mp-hb-iiot-v3-2-bf1a4cf5fa8e@solid-run.com
LG LD070WX3-SL01 was mistakenly documented as a simple DSI panel, which it
clearly is not. Address this by adding the proper schema for this panel.
There is only one user of this panel binding in the mainline Linux kernel,
which is the Nvidia tablet Tegra Note 7. Its panel is broken anyway since
it cannot initialize properly if the bootloader does not leave a
pre-initialized panel. It also cannot suspend or re-initialize properly,
since no DSI configuration is set and it has a loose regulator which
relies on an always-on property rather than being hooked to the panel
where it belongs.
Tegra Note 7 device tree is adjusted as a part of this series.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251110091440.5251-2-clamor95@gmail.com
